Commit Graph

4 Commits

Author SHA1 Message Date
Jan Beulich
6de47a5e37 efi/bgrt: Use efi_mem_type()
Avoid effectively open-coding the function.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170825155019.6740-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-26 09:20:33 +02:00
Dave Young
792ef14df5 efi: Fix boot panic because of invalid BGRT image address
Maniaxx reported a kernel boot crash in the EFI code, which I emulated
by using same invalid phys addr in code:

  BUG: unable to handle kernel paging request at ffffffffff280001
  IP: efi_bgrt_init+0xfb/0x153
  ...
  Call Trace:
   ? bgrt_init+0xbc/0xbc
   acpi_parse_bgrt+0xe/0x12
   acpi_table_parse+0x89/0xb8
   acpi_boot_init+0x445/0x4e2
   ? acpi_parse_x2apic+0x79/0x79
   ? dmi_ignore_irq0_timer_override+0x33/0x33
   setup_arch+0xb63/0xc82
   ? early_idt_handler_array+0x120/0x120
   start_kernel+0xb7/0x443
   ? early_idt_handler_array+0x120/0x120
   x86_64_start_reservations+0x29/0x2b
   x86_64_start_kernel+0x154/0x177
   secondary_startup_64+0x9f/0x9f

There is also a similar bug filed in bugzilla.kernel.org:

  https://bugzilla.kernel.org/show_bug.cgi?id=195633

The crash is caused by this commit:

  7b0a911478 efi/x86: Move the EFI BGRT init code to early init code

The root cause is the firmware on those machines provides invalid BGRT
image addresses.

In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.

According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:

  http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf

Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.

Reported-by: Maniaxx <tripleshiftone@gmail.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09 14:50:11 +02:00
Dave Young
7425826f4f efi/bgrt: Skip efi_bgrt_init() in case of non-EFI boot
Sabrina Dubroca reported an early panic:

  BUG: unable to handle kernel paging request at ffffffffff240001
  IP: efi_bgrt_init+0xdc/0x134

  [...]

  ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

... which was introduced by:

  7b0a911478 ("efi/x86: Move the EFI BGRT init code to early init code")

The cause is that on this machine the firmware provides the EFI ACPI BGRT
table even on legacy non-EFI bootups - which table should be EFI only.

The garbage BGRT data causes the efi_bgrt_init() panic.

Add a check to skip efi_bgrt_init() in case non-EFI bootup to work around
this firmware bug.

Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170526113652.21339-6-matt@codeblueprint.co.uk
[ Rewrote the changelog to be more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-28 11:06:17 +02:00
Bhupesh Sharma
75def552bb x86/efi/bgrt: Move efi-bgrt handling out of arch/x86
Now with open-source boot firmware (EDK2) supporting ACPI BGRT table
addition even for architectures like AARCH64, it makes sense to move
out the 'efi-bgrt.c' file and supporting infrastructure from 'arch/x86'
directory and house it inside 'drivers/firmware/efi', so that this common
code can be used across architectures.

Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-05 12:27:24 +02:00