Commit Graph

204 Commits

Author SHA1 Message Date
Linus Torvalds
3e241ff0c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
  netfilter: ctnetlink: fix gcc warning during compilation
  net/netrom: Fix socket locking
  netlabel: Always remove the correct address selector
  ucc_geth.c: Fix upsmr setting in RMII mode
  8139too: fix HW initial flow
  af_iucv: Fix race when queuing incoming iucv messages
  af_iucv: Test additional sk states in iucv_sock_shutdown
  af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
  af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
  af_iucv: consider state IUCV_CLOSING when closing a socket
  iwlwifi: DMA fixes
  iwlwifi: add debugging for TX path
  mwl8: fix build warning.
  mac80211: fix alignment calculation bug
  mac80211: do not print WARN if config interface
  iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
  iwlwifi: fix EEPROM validation mask to include OTP only devices
  atmel: fix netdev ops conversion
  pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
  mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
  ...
2009-04-24 07:46:51 -07:00
Christian Lamparter
d577e7cdb1 p54: fix ps-poll delivery in ap mode
PS-Polled frames must be sent with OUT_NOCANCEL flag set,
or the firmware will reject all of them, at the station is still blacklisted.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:57:16 -04:00
Christian Lamparter
fade5db4f2 p54: deactivate broken powersave function (part 2)
This patch deactivates powersave in station mode.

It does not work correctly yet, so the code does more harm than good.

(I split the original patch and sent part of it for 2.6.30, which didn't
have the IEEE80211_HW_BEACON_FILTER flag. -- JWL)

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:57:15 -04:00
Christian Lamparter
45f483c002 p54: remove module_ stubs
Christoph Hellwig pointed out that these stubs are unnecessary.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:57:14 -04:00
Christian Lamparter
4312a86b68 p54: remove obsolet signal quality calculation
The signal quality percentage is now calculated by mac80211 stack.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:45 -04:00
Christian Lamparter
6dfe9a884f p54: utilize all available key slots for decryption offload
This patch takes care of outstanding TODOs:
/* TODO: some devices have 4 more free slots for rx keys */

Now the driver can utilize all available key slots instead of just 4.
Obviously, this helps most in AP/IBSS(/MESH) mode, when
we have to use more different keys.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:45 -04:00
Max Filippov
87cbfd0688 p54spi: get rid of busy-wait loops
p54spi_wakeup and p54spi_tx_frame used busy-waiting loop
to poll for 'ready' bits in SPI_ADRS_HOST_INTERRUPTS register.
With this change in place 'WR_READY timeout' messages do not
show anymore.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:41 -04:00
Christian Lamparter
f13027af5c p54: add beacon filtering support
This patch adds beacon filtering support to p54.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:36 -04:00
Christian Lamparter
dce072580e p54: more SoftLED updates
This patch hopefully finishes the SoftLED code:
- It adds two more LEDs (rx and radio).
  (the FW claims it can support up to 16 LEDs,
   but I doubt that any vendor put more than 4 on a board)
- update the LEDs in a _delayed_ workqueue.
  No one reported any more crashes.
  (see: "PATCH] p54: fix race condition in memory management")
  So we can stop burning the mm code.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:36 -04:00
Christian Lamparter
cf3a9579f6 p54: clean up p54.h's struct p54_common
This patch rearrange and regroups most elements in p54_common.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:36 -04:00
Max Filippov
9f201a8783 p54spi: compensate firmware alignment bug in p54spi_rx
Firmware may insert up to 4 padding bytes after the lmac header,
but it does not amend the size of SPI data transfer.
Such packets has correct data size in header, thus referencing
past the end of allocated skb. Put extra 4 bytes to the end of the
received skb to compensate for this case.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:27 -04:00
Max Filippov
4f5cab969b p54spi: fix p54spi_tx_frame DMA transfer initiation and skb cleanup
p54spi_tx_frame wasn't waiting for HOST_ALLOWED in SPI_ADRS_DMA_WRITE_CTRL.
This resulted in frequent 'WR_READY timeout' on beacon resubmission.

Also don't free skb on error path, as it gets freed on p54spi_wq_tx.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:27 -04:00
Max Filippov
5e3af1d2d3 p54spi: fix p54spi_upload_firmware
Instead of firmware itself p54_upload_firmware was sending to the device
content of struct firmware and the following random garbage.

Notice '&' before priv->firmware->data at p54spi_spi_write.
But simple removing of '&' sign triggered BUG_ON at dma_cache_maint.
Thus kmemdup - kfree workaround.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:26 -04:00
Max Filippov
f74d0f5cac p54spi: mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bit
Mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bit.
 Without this, 'fw_upload not allowed to DMA write' is observed at both N800 and N810.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:26 -04:00
Christian Lamparter
c3b93c878d p54: deactivate broken powersave function
This patch deactivates powersave in station mode.

It does not work correctly yet, so the code does more harm than good.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 16:36:26 -04:00
Christian Lamparter
e3062403f5 p54usb: add Telsey 802.11g USB2.0 Adapter
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16 10:39:12 -04:00
Christian Lamparter
731c653168 p54spi: fix locking warning in p54spi_op_tx
This patch fixes the following waring:
> ------------[ cut here ]------------
>WARNING: at kernel/softirq.c:138 local_bh_enable+0x54/0xbc()
>Modules linked in: p54spi
>[<c0034ff8>] (dump_stack+0x0/0x14)
>[<c005b1a4>] (warn_on_slowpath+0x0/0x68)
>[<c00604c8>] (local_bh_enable+0x0/0xbc)
>[<bf000000>] (p54spi_op_tx+0x0/0x4c [p54spi])
>[<c01a4d34>] (p54_sta_unlock+0x0/0x78)

p54spi_op_tx needs to be called from different locking contexts.
Therefore we have to protect the linked list with irqsave spinlocks.

Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16 10:39:06 -04:00
Christian Lamparter
540828196e p54: replace MAC80211_LEDS with P54_LEDS in p54.h
I'm very sorry, as this change belongs to the other patch:
"[PATCH] p54: fix SoftLED compile dependencies".
however I must have somehow lost "git add" for that file.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-16 10:39:04 -04:00
Yang Hongyang
e930438c42 Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)
This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:33 -07:00
Christian Lamparter
a1bfa0eb98 p54: Kconfig maintenance
This patch updates p54's Kconfig entry and removes the out-dated device list.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:18 -04:00
Christian Lamparter
d8cd7effc2 p54: fix SoftLED compile dependencies
This patch fixes a compile problem when the MAC80211_LEDS
triggers are enabled but not LED class itself.
(which is sort of pointless, but anyway...)

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:06 -04:00
Geert Uytterhoeven
1bf68e5cda wireless/p54: P54_SPI should depend on GENERIC_HARDIRQS
m68k allmodconfig:
| drivers/net/wireless/p54/p54spi.c: In function 'p54spi_probe':
| drivers/net/wireless/p54/p54spi.c:675: error: implicit declaration of function
| 'set_irq_type'
| make[4]: *** [drivers/net/wireless/p54/p54spi.o] Error 1

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:13:02 -04:00
Christian Lamparter
346de732cb p54: completely ignore rx'd frames with bad FCS
Passing frames with a bad FCS to the user is an optional feature.
However it doesn't work reliable and strangely not in the native monitor mode?!

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:35 -04:00
Christian Lamparter
94041b2940 p54: enable power save support
This patch enables power save support on all p54 devices.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:28 -04:00
Christian Lamparter
d0b45aef4f p54: initial SoftLED support
This patch adds SoftLED support for all p54 devices.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:28 -04:00
Christian Lamparter
efeada2c0a p54: fix iwconfig txpower off
Disabling the receiver logic with P54_FILTER_TYPE_RX_DISABLED is not
supported by all firmwares. However we have an alternative: hibernation.
And the only side effect - so far - is a bit less power consumption. WIN!

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:28 -04:00
Christian Lamparter
ad5e72ee81 p54pci: convert printk(KERN_* to dev_*
This patch replaces most printk(KERN_* "") with their by dev_* analogue.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:28 -04:00
Christian Lamparter
2ac710720c p54: unify ieee80211 device registration
All three drivers (p54pci, p54usb and p54spi) are implementing the
same functionality three times. So, why not put it into the shared library?!

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:27 -04:00
Christian Lamparter
fbf95296c1 p54usb: stop USB core interference in exit path
The patch fixes a problem when the (Soft)LED stayed on after the module was unloaded.
It turned out that the USB core disables all endpoints before calling the disconnect method.
So it was impossible to switch off the radio & LEDs.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:27 -04:00
David S. Miller
d5df2a1613 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x_main.c
	drivers/net/wireless/iwlwifi/iwl3945-base.c
	drivers/net/wireless/rt2x00/rt73usb.c
2009-03-10 05:04:16 -07:00
Christian Lamparter
c035002472 p54: fix race condition in memory management
This patch fixes a number of race conditions in the driver.
Up until now, "entry" pointer was initialized before acquiring the right lock.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-06 15:54:32 -05:00
Roel Kluin
e05eac3794 p54: misplaced parentheses
Only FIF_FCSFAIL is set due to parentheses

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:52:43 -05:00
Johannes Berg
881d948c23 wireless: restrict to 32 legacy rates
Since the standards only define 12 legacy rates, 32 is certainly
a sane upper limit and we don't need to use u64 everywhere. Add
sanity checking that no more than 32 rates are registered and
change the variables to u32 throughout.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:01:09 -05:00
Christian Lamparter
a2116993c1 p54spi: remove arch specific dependencies
On Friday 16 January 2009 20:33:43 Kalle Valo wrote:
> N800 and N810 support is not on mainline yet, for stlc45xx I decided
> to add module parameters for the gpio numbers. Here's the commit from
> stlc45xx repo:
>
> 35afc5df00

This is the same patch for p54spi.
It removes all N800/N810 specific code from p54spi, so the driver can be used on
other architectures, or configurations as well.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:44 -05:00
Christian Lamparter
c88a768d7e p54usb: fix conflict with recent usb changes
A recent change in the usb core "USB: change interface to usb_lock_device_for_reset()"
conflicts with "p54usb: utilize usb_reset_device for 3887".

Sadly, we have to call usb_reset_device before we can upload the firmware on 3887.
Unless someone figures out how to reliably stop the 3887 so the hardware is still usable
next time we want to start it.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:43 -05:00
Christian Lamparter
cd8d3d3212 p54spi: p54spi driver
This patch adds the p54spi driver.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:25 -05:00
Christian Lamparter
4628ae7558 p54spi: stlc45xx eeprom blob
Usually every prism54 design hardware has a tiny eeprom chip in which all
device specific data for calibration and link-tuning is stored.
The stlc45xx chips are the only exception.
They are made for embedded devices, where space is scarce.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:25 -05:00
Christian Lamparter
6917f506a0 p54: longbow frontend support
This patch adds support for longbow RF chip.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:24 -05:00
Christian Lamparter
83cf1b6edb p54: prepare the eeprom parser routines for longbow
This patch adds support to upload pre-calculated calibration data to the firmware.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:22 -05:00
Christian Lamparter
3cd08b383b p54: upgrade memrecord to p54_tx_info
mac80211 reserves 24 bytes in skb->cb for the driver.
So far, we only used them to keep track of used and free device memory.
But p54spi will need a slice of it, as well as the stuck frame detection.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:19 -05:00
Christian Lamparter
63f2dc9f2f p54: refactor p54_alloc_skb
Old firmwares had no problems processing frames which filled eighth of the memory window.
However we have to be a bit more careful with fat frames when we talk to new firmwares.
Apart from that, I confess the old logic was a bit weird and not very sophisticated.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 16:00:18 -05:00
Christian Lamparter
acbaf32e94 p54: return NETDEV_TX_OK in p54_tx and fix sparse warnings
This patch addresses all recent comments from Johannes Berg:

1st: (reference http://marc.info/?l=linux-wireless&m=123124685019631 )
>First off: all those should return NETDEV_TX_OK/BUSY.
>iwl-agn: returns 0 (== NETDEV_TX_OK, but still should be changed)
>[...]
>p54: same (some paths)

2nd:
> due to your PS patch ("p54: power save management"), please run sparse:
> make C=2 CF=-D__CHECK_ENDIAN__ M=...
> +drivers/net/wireless/p54/p54common.c:1753:8: warning: incorrect type in assignment (different base types)
> +drivers/net/wireless/p54/p54common.c:1769:29: warning: incorrect type in assignment (different base types)
The cpu_to_le16 ended up in the wrong line... Sorry!

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:57 -05:00
Christian Lamparter
2b8d4e2eea p54: power save management
This patch implements dynamic power save feature for p54.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:44 -05:00
Christian Lamparter
51eed9923d p54: implement FIF_OTHER_BSS filter setting
According to STMicroelectronics' LMAC documentation, the P54_FILTER_TYPE_TRANSPARENT flag
"configures the receive frame filter to pass all frames without regard to type and address matching."

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:44 -05:00
Christian Lamparter
78eb7484fa p54: enable rx/tx antenna diversity by eeprom bits
Respect all documented bits in the eeprom about the device diversity features.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:43 -05:00
Johannes Berg
dc822b5db4 mac80211: clean up set_key callback
The set_key callback now seems rather odd, passing a MAC address
instead of a station struct, and a local address instead of a
vif struct. Change that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Bob Copeland <me@bobcopeland.com> [ath5k]
Acked-by: Ivo van Doorn <ivdoorn@gmail.com> [rt2x00]
Acked-by: Christian Lamparter <chunkeey@web.de> [p54]
Tested-by: Kalle Valo <kalle.valo@nokia.com> [iwl3945]
Tested-by: Samuel Ortiz <samuel@sortiz.org> [iwl3945]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:42 -05:00
Christian Lamparter
98a8d1a8f2 p54: regulatory domain hints
This patch adds a sub-routine that parses the default country eeprom entry
and forwards the obtained Alpha2 identifier to the regulatory sub-system.

Note: I dropped the p54 specific regdomain<->alpha2 conversion code for now.
But it will be added as soon as there's the common library function is ready.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:40 -05:00
Christian Lamparter
e365f16046 p54: prevent upload of wrong firmwares
This patch will prevent anyone to upload a firmware which was not designed for his device.

There's still a catch:
There is no easy way to detect if a firmware is for PCI or for USB (1st Gen),
because they all share the same LM86 identifier.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:39 -05:00
Christian Lamparter
6982869d99 p54usb: utilize usb_reset_device for 3887
Sometimes on unload or reboot the 3887 USB devices become stuck.
<usual log entry>
kernel: usbcore: registered new interface driver p54usb
kernel: usb 2-10: (p54usb) reset failed! (-110)
kernel: p54usb: probe of 2-10:1.0 failed with error -110
[...]

and a physical unplug and replug was necessary.
However we should be able to do this in software as well,
without any user interaction.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:59:39 -05:00
Christian Lamparter
29701e5abf p54: enable proper frame injection
This patch enables frame injection in monitor mode for all p54 devices.
As a result, any user can finally use the aircrack-ng suite out of the box.

e.g:
aireplay-ng --test wlan0
Trying broadcast probe requests...
Injection is working!
Found 1 AP

Trying directed probe requests...
XX:XX:XX:XX:XX:XX - channel: i - 'SSID'
Ping (min/avg/max): 1.536ms/3.193ms/4.377ms Power: 193.00
30/30: 100%

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:58:44 -05:00
Christian Lamparter
a15bd00543 p54: label queues with their corresponding names
This patch introduce new shiny named labels for our 8 (4 - on old firmware) queues.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:58:43 -05:00
Christian Lamparter
b4068a8049 p54usb: fix packet loss with first generation devices
Artur Skawina confirmed that the first generation devices needs the same
URB_ZERO_PACKET flag, in oder to finish the pending transfer properly.
The second generation has been successfully fixed by
"p54usb: fix random traffic stalls (LM87)" (43af18f06d5)

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-23 15:38:35 -05:00
Christian Lamparter
e2fe154e91 p54usb: fix nasty use after free
In theory, the firmware acks the received a data frame, before signaling the driver to free it again.
However Artur Skawina <art.08.09@gmail.com> has shown that it can happen in reverse order as well.
This is very bad and could lead to memory corruptions, oopses and panics.

Thanks to Artur Skawina <art.08.09@gmail.com> for reporting and debugging this issue.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Tested-by: Artur Skawina <art.08.09@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22 13:55:02 -05:00
Christian Lamparter
12da401e0d p54: more cryptographic accelerator fixes
If we let the firmware do the data encryption, we have to remove the ICV and
(M)MIC at the end of the frame before we can give it back to mac80211.
Or, these data frames have a few trailing bytes on cooked monitor interfaces.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22 13:55:02 -05:00
Chr
40ab73cc6c p54: add missing break in eeprom parser
This patch fixes a obvious memory leak in the eeprom parser.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-22 13:55:02 -05:00
Christian Lamparter
674743033c p54: fix p54_set_key's return code
p54 doesn't support AES-128-CMAC offload.

This patch will fix the noisy mac80211 warnings, when 802.11w is enabled:
mac80211-phy189: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-22)
mac80211-phy189: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-22)

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16 17:08:25 -05:00
Artur Skawina
275719089b p54: set_tim must be atomic.
Fix for:

BUG: scheduling while atomic: named/2004/0x10000200
Pid: 2004, comm: named Not tainted 2.6.29-rc1-00271-ge9fa6b0 #45
Call Trace:
 [<c04d4ef7>] schedule+0x2a7/0x320
 [<c03aed74>] __alloc_skb+0x34/0x110
 [<c011f5b3>] __cond_resched+0x13/0x30
 [<c04d501d>] _cond_resched+0x2d/0x40
 [<c016d8c5>] kmem_cache_alloc+0x95/0xc0
 [<c016b8d4>] check_object+0xc4/0x230
 [<c03aed74>] __alloc_skb+0x34/0x110
 [<c02ede91>] p54_alloc_skb+0x71/0xf0
 [<c02ee36f>] p54_set_tim+0x3f/0xa0
 [<c04ae064>] sta_info_set_tim_bit+0x64/0x80
 [<c04c1017>] invoke_tx_handlers+0xd57/0xd80
 [<c016c397>] free_debug_processing+0x197/0x210
 [<c03ae215>] pskb_expand_head+0xf5/0x170
 [<c04bfd94>] __ieee80211_tx_prepare+0x164/0x2f0
 [<c04c1a8d>] ieee80211_skb_resize+0x6d/0xe0
 [<c04c250f>] ieee80211_master_start_xmit+0x23f/0x550
 [<c016d188>] __slab_alloc+0x2b8/0x4f0
 [<c013a711>] getnstimeofday+0x51/0x120
 [<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240
 [<c03c6a4b>] __qdisc_run+0x1ab/0x200
 [<c0136aa1>] __run_hrtimer+0x31/0xf0
 [<c03b6247>] dev_queue_xmit+0x247/0x500
 [<c04c1e56>] ieee80211_subif_start_xmit+0x356/0x7d0
 [<c0466ff7>] packet_rcv_spkt+0x37/0x150
 [<c0466ff7>] packet_rcv_spkt+0x37/0x150
 [<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240
 [<c03c6a4b>] __qdisc_run+0x1ab/0x200
 [<c03b6247>] dev_queue_xmit+0x247/0x500
 [<c03bc1e2>] neigh_resolve_output+0xe2/0x200
 [<c0410080>] ip_finish_output+0x0/0x290
 [<c0410267>] ip_finish_output+0x1e7/0x290
 [<c040f355>] ip_local_out+0x15/0x20
 [<c040f5d2>] ip_push_pending_frames+0x272/0x380
 [<c042bbc6>] udp_push_pending_frames+0x146/0x3a0
 [<c042d52a>] udp_sendmsg+0x2fa/0x6b0
 [<c0433bc7>] inet_sendmsg+0x37/0x70
 [<c03a7b7e>] sock_sendmsg+0xbe/0x100
 [<c0133cd0>] autoremove_wake_function+0x0/0x50
 [<c011c043>] __wake_up_common+0x43/0x70
 [<c024a892>] copy_from_user+0x32/0x130
 [<c024a892>] copy_from_user+0x32/0x130
 [<c03b001e>] verify_iovec+0x2e/0xb0
 [<c03a7d3f>] sys_sendmsg+0x17f/0x290
 [<c017730a>] pipe_write+0x29a/0x570
 [<c013a172>] update_wall_time+0x492/0x8e0
 [<c013a711>] getnstimeofday+0x51/0x120
 [<c011b05d>] sched_slice+0x3d/0x80
 [<c013a711>] getnstimeofday+0x51/0x120
 [<c0136657>] hrtimer_forward+0x147/0x1a0
 [<c01101b0>] lapic_next_event+0x10/0x20
 [<c013ccb3>] clockevents_program_event+0xa3/0x170
 [<c03a9054>] sys_socketcall+0xa4/0x290
 [<c0110920>] smp_apic_timer_interrupt+0x40/0x70
 [<c0103165>] sysenter_do_call+0x12/0x25

Signed-off-by: Artur Skawina <art.08.09@gmail.com>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16 17:08:24 -05:00
Christian Lamparter
ef15aa490f p54: fix oops caused by bad eeproms
This patch fixes a bug that could occur, if it the eeprom is incomplete or partly corrupted.

BUG: unable to handle kernel NULL pointer dereference at 00000008
IP: p54_assign_address+0x108/0x15d [p54common]
Oops: 0002 [#1] SMP
Pid: 12988, comm: phy1 Tainted: P        W  2.6.28-rc6-wl #3
RIP: 0010: p54_assign_address+0x108/0x15d [p54common]
 [...]
Call Trace:
 p54_alloc_skb+0xa3/0xc0 [p54common]
 p54_scan+0x37/0x204 [p54common]
 [...]

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16 17:08:22 -05:00
John W. Linville
26d1597c9a p54: fix "‘ret’ may be used uninitialized" warning
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’:
drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13 10:25:46 -05:00
Christian Lamparter
124b68e755 p54: fix WARN_ON at line 2247 of net/mac80211/rx.c
This patch hopefully fixes a mac80211<->p54 interaction problem, which was
described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=123009889327707 )

I guess the warning was triggered by pending frames in the receive queue,
while we're doing a band change 5GHz.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12 14:24:56 -05:00
Christian Lamparter
00627f229c p54usb: fix random traffic stalls (LM87)
All LM87 firmwares need a explicit termination "packet",
in oder to finish the pending transfer properly.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12 14:24:52 -05:00
Christian Lamparter
c1d34c1dad p54: crypto offload fixes
This patch fixes two small flaws:
 - restore the original TKIP IV if we altered it.
 - reserve & initialize ICV with zeros.
   This is actually only necessary for some obsolete p54usb firmwares.
   But we don't know yet, if all devices are compatible with the new revisions.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12 14:24:52 -05:00
Michiel
878e6a432f p54usb: Add USB ID for Thomson Speedtouch 121g
Add the USB ID for Thomson Speedtouch 121g to p54usb.

Signed-off-by: Michiel <michiel@ettema.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12 14:24:50 -05:00
Larry Finger
51fb80fefe p54usb: Fix to prevent SKB memory allocation errors with 4K page size
On x86_64 architecture with 4K page size and SLUB debugging enabled, stress
testing on p54usb has resulted in skb allocation failures of O(1) and extreme
page fragmentation. Reducing rx_mtu fixes this problem by reducing the size of
all receive skb allocations to be of O(0). This change does not impact
performance in any way.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12 14:24:49 -05:00
Christian Lamparter
6110781af0 p54usb: bring first generation devices back to life
This patch fixes a serious regression (introduced by:
"p54: fix memory management")
that affected isl3886+net2280 usb devices operation.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Tested-by: Artur Skawina <art.08.09@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:23:47 -05:00
Christian Lamparter
0a5ec96ad6 p54: remove free_on_tx parameter
This patch simplifies the tx code a bit and will be necessary for
the upcoming stlc45xx<->p54 port.

In detail: we no longer have to tell all back-end drivers directly,
if we want to free a frame right after it was send to the firmware,
or if we do it in the library callback later.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:23:19 -05:00
Christian Lamparter
69ba3e5d74 p54: more accurate rssi to dBm conversion
This patch replaces the static rssi auto calibration data
with more precise values out of the device's eeprom.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:23:17 -05:00
Christian Lamparter
ee370ceda8 p54: update ACK failure statistic counter in real-time
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:23:13 -05:00
Christian Lamparter
54fdb040b4 p54: move statistic timer update routine into a workqueue
This patch moves a good chunk of code from the former statistic update
timer routine into a workqueue, which is kindly provided by mac80211.

Also as a nice side-effect we can lay the foundation for other
essential housekeeping features we want to do in the future.
e.g:
 - drain the (clogged) tx_queue.
 - initiate bursts.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:23:11 -05:00
Christian Lamparter
59651e8918 p54: fix oops on faulty devices
This patch fixes an oops when the devices suddenly starts
to receive martian data frames.

bug reference:
http://marc.info/?l=linux-wireless&m=122872280317635&w=2

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12 14:02:15 -05:00
Christian Lamparter
39ca5bb76f p54: enforce strict tx_queue limits
The patch fixes an old FIXME in p54pci.c by moving the "queue full"
check into the common library, where we can deal with it properly.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12 14:01:55 -05:00
Christian Lamparter
89fad578a6 mac80211: integrate sta_notify_ps cmds into sta_notify
This patch replaces the newly introduced sta_notify_ps function,
which can be used to notify the driver about every power state
transition for all associated stations, by integrating its functionality
back into the original sta_notify callback.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12 14:01:42 -05:00
Christian Lamparter
dd397dc9dd p54usb: rewriting rx/tx routines to make use of usb_anchor's facilities
Alan Stern found several flaws in p54usb's implementation and annotated:
"usb_kill_urb() and similar routines do not expect an URB's completion
routine to deallocate it.  This is almost obvious -- if the URB is deallocated
before the completion routine returns then there's no way for usb_kill_urb
to detect when the URB actually is complete."

This patch addresses all known limitations in the old implementation and fixes
khub's "use-after-freed" hang, when SLUB debug's poisoning option is enabled.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Cc: stable@kernel.org
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12 14:01:39 -05:00
Johannes Berg
c912765926 p54: fix lm87 checksum endianness
This fixes the checksum calculation for lm87 firmwares
on big endian platforms, the device treats the data as
an array of 32-bit little endian values so the driver
needs to do that as well.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:46 -05:00
Christian Lamparter
02e37ba129 p54: per-device names
This patch replaces the static "p54:" strings in front of most printk's
with their corresponding per-device names.

It was always a bit of a hassle to check which device was
generating all the messages.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:45 -05:00
Christian Lamparter
b2023ddcfa p54: refactoring
Thanks to the introduction of "changed" flags, we no longer
have to do the bookkeeping of p54's firmware state for everything.
Thus we can cut down redundancy code.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:44 -05:00
Christian Lamparter
64c354ddcd p54: include support for 2.13.24.0 USB LM87 Firmwares
Those firmwares are probably capable of reprogramming the device's eeprom.
We better support them officially, before all the accidents happen.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:44 -05:00
Christian Lamparter
25900ef019 p54: utilize cryptographic accelerator
This patch allows p54 to utilize its WEP, TKIP and CCMP accelerator.

Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:43 -05:00
Christian Lamparter
c772a08ba7 p54: revamp station power save management in access point mode
This patch addresses the problem in:
http://marc.info/?l=linux-wireless&m=122727674810057&w=2

Thanks to Stefan Steuerwald <salsasepp@googlemail.com>
extensive iPod touch tests. We could finally squash some bugs in
p54's master mode / access point implementation.

Let's hope we got everything right this time and all stations
from now on will wake up on TIM and receive their queued frames
and go to sleep again without any hiccups.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:43 -05:00
Christian Lamparter
b50563a685 p54: fix wmm queue settings
This patch fixes a regression (introduced by
"p54: more definitions form lmac_longbow.h and pda.h")

It turned out that the "ret" variable wasn't initialized and
this caused the following warnings/errors to appear:

wmaster1: failed to set TX queue parameters for queue 2
wmaster1: failed to set TX queue parameters for queue 3
wmaster1: failed to set TX queue parameters for queue 1
wmaster1: failed to set TX queue parameters for queue 0

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:50 -05:00
Christian Lamparter
ced0957442 p54: honour bss_info_changed's basic_rates and other settings
As was pointed out in "p54: honour bss_info_changed's short slot time settings",
bss_info_changed provides more useful settings that can be used by the driver.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:39 -05:00
Christian Lamparter
40db0b2259 p54pci: cache firmware for suspend/resume
Johannes pointed out that the driver has cache the firmware for
suspend/resume cycles.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:38 -05:00
Christian Lamparter
ffed785898 p54: minor fixes
This patch contains only contains a one-liner fixes and enhancements

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:38 -05:00
Christian Lamparter
d131bb59c1 p54: enable Mesh Point support
This patch enables Mesh Point operation for any p54 device.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:37 -05:00
Chr
9483407d09 p54: initialize all deprecated fields
The new mechanism for allocing space for control frames,
didn't "zero" out the payload data... However I haven't
heard of any hiccups so far...

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:39 -05:00
Pavel Roskin
c8034c4485 p54: don't report known but unhandled EEPROM codes as unknown
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:38 -05:00
John W. Linville
db4186cf15 p54: eliminate warning for uninitialized variable 'tim_len'
drivers/net/wireless/p54/p54common.c: In function ‘p54_tx’:
drivers/net/wireless/p54/p54common.c:1058: warning: ‘tim_len’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:10:16 -05:00
Christian Lamparter
e5ea92a752 p54: AP & Ad-hoc testing
This patch finally adds all necessary code to test Ad-hoc & AP mode with p54.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:10:16 -05:00
Christian Lamparter
94585b090b p54: put broadcast frames into the right queues
stlc45xx's specs finally brought some light what all the 4 extra queues for.
now CAB data and managment frames have their own queue.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:10:16 -05:00
Christian Lamparter
9e7f3f8e4a p54: more definitions form lmac_longbow.h and pda.h
This patch ports more useful features to p54
  - PDR definitions for the synth chips & regulatory domain.
  - honour IEEE80211_TX_CTL_ASSIGN_SEQ flag, if it's set.
  - adds some lost mutex_lock & mutex_unlock.
  - replace two more "magic values" that sneaked past.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:10:16 -05:00
Christian Lamparter
9a8675d712 p54: introduce new names for device firmwares
Johannes thought it would have been a good idea to change the firmware names.

Note: we still have fallbacks in case our users don't want to "break their running system",
but we won't advertise them with MODULE_FIRMWARE.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:10:15 -05:00
John W. Linville
27df605ebe p54: integrate parts of lmac_longbow.h and other parts of stlc45xx
This patch removes most/all? of the "magic" numbers and unknown structure
variables inside the code and replaces them with meaningful prototypes.

(Plus a one line warning fix from Larry Finger <Larry.Finger@lwfinger.net>.)

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:34 -04:00
Christian Lamparter
5e73444e91 p54: borrow some setup code from stlc45xx
This patch initialize all remaining values which are necessary for
SPI firmwares.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:34 -04:00
Christian Lamparter
b92f30d65a p54: fix memory management
We have to be careful if multiple "control frames" are passed in a very short intervals to
the device's firmware. As p54_assign_address always put them into same memory location.
To guarantee that this won't happen anymore, we have to treat control frames like normal
data frames in the devices own memory management.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:33 -04:00
Christian Lamparter
9de5776ff3 p54: p54: refactor p54_rx_frame_sent
the long names and the nesting in p54_rx_frame_sent really
became a "line longer than 80 characters" problem.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:33 -04:00
Christian Lamparter
0f1be97891 p54: refactor statistic timer code
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:32 -04:00
Christian Lamparter
0fdd7c5d2d p54: broken out edcf changes
This patch series hopefully increases p54's "longterm" stability.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:31 -04:00
Johannes Berg
c12abae333 p54: implement MRR
This implements multi-rate retry in p54. With lots of help
and testing from Christian and the limiting idea from nbd.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:24 -04:00
Johannes Berg
e6a9854b05 mac80211/drivers: rewrite the rate control API
So after the previous changes we were still unhappy with how
convoluted the API is and decided to make things simpler for
everybody. This completely changes the rate control API, now
taking into account 802.11n with MCS rates and more control,
most drivers don't support that though.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:23 -04:00
Johannes Berg
7eb27af766 p54/rtl8187: fix up the seqno patch
Sorry about that, for some reason I didn't notice that I'd
left some unused variables in there.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:16 -04:00