This patch add routings mixer controls for slim rx ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to SLIMbus TX dais in AFE module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing code already has support for SLIMbus TX and RX, only thing
that was missing from TX side was mapping between virtual to actual
DSP port ids.
This patch adds those mappings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun(). It simplifies the locking as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace open-codes with the standard snd_pcm_stop_xrun() helper.
It simplifies codes a lot.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
256 * fs * 2 * mclk_src_scaling[i].param
Addresses-Coverity-ID: 1339616 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine drivers statically define a number of DAI links that currently
cannot be changed or removed by topology. This means PCMs and platform
components cannot be changed by topology at runtime AND machine drivers
are tightly coupled to topology.
This patch allows topology to override the machine driver DAI link config
in order to reuse machine drivers with different topologies and platform
components. The patch supports :-
1) create new FE PCMs with a topology defined PCM ID.
2) destroy existing static FE PCMs
3) change the platform component driver.
4) assign any new HW params fixups.
5) assign a new card name prefix to differentiate this topology to userspace.
The patch requires no changes to the machine drivers, but does add some
platform component flags that the platform component driver can assign
before loading topologies.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The generated clock (gclk) driver is able to set aclk as its parent and
change its rate alone, if needed. This means that our driver no longer
needs to configure aclk and we can let gclk select and configure its
clock source.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the es7154 which is basically an es7134 with an
embedded power amplifier and lower maximum sample rate
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop AVDD in favor of PVDD to match the names used in the datasheet
and only claim PVDD on the es7154. The es7134 and es7144 don't have
a separate supply for the digital I/O.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the I2S channel names are fixed, and DMA data flow order is
consistent (ch1 then ch2), we can simplify channel start order:
start the upstream channel and then the downstream channel for both
playback and capture cases.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pointer() callback gets its value by reading the I2S BYTE_COUNT
register. This is a 64-bit runnning transaction counter. If a
transaction was aborted in the middle of a sample buffer, the counter will
stop counting on a number divisible by the buffer size. Since we actually
use it as a pointer into an aligned buffer, however, we do want to ensure
that it always starts at a number divisible by the buffer size when
starting a transaction, hence we reset it whenever starting a transaction.
To accomplish this, it wasn't necessary to zero bytescount at the
termination of each transaction, so remove this unnecessary code.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
On capture, audio data is first copied from I2S to ACP memory, and then
from ACP to SYSRAM. The I2S_TO_ACP_DMA interrupt fires on every sample
transferred from I2S to ACP memory. That is it fires ~48000 times per
second when capturing @ 48 kHz. Since we don't do anything on this
interrupt anyway, disable it to save quite a few unnecessary interrupts.
The real "work" (calling snd_pcm_period_elapsed()) is done when transfer
from ACP to SYSRAM is complete.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
On capture, audio data is first copied from I2S to ACP memory, and then
to SYSRAM. For each step the channel number increases, so the names in
the driver were wrong.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is always correct to subtract out the starting bytescount value. Even
in the case of 2^64 byte rollover (292 Million Years in the future
@ 48000 Hz) the math still works out.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 6b116dfb46 ("ASoC: AMD: make channel 1 dma as circular") made
both channels circular, so this comment and logic no longer applies. Always
stop ch2 (the channel closest to the output) before ch1. This ensures
that the downstream circular DMA channel does not continue to play/capture
repeated samples after the upstream circular DMA channel has already
stopped.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the everest es7241 which is a simple 2 channels
analog to digital converter.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We are currently using power saving mode for button detection.
However, it will impact the headset recording performance.
This patch will switch button detection to normal mode in capture
and switch to power saving mode in the end of capture.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the VDD and AVDD power supplies to the DAPM graph as some board may
need to enable a regulator to turn them on.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For each supported sample rate, the es7134 can work with several
mclk / sample rate ratio. Check if ratio we get is actually OK.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
64Khz is actually not supported by the es7134 according to the datasheet
Fixes: 9000b59d7a ("ASoC: es7134: add es7134 DAC driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should
not be used anymore. In order to support PXA boards on DT platforms, remove
them and let the code figure out the correct dividers and PLL base
frequencies itself.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit d767d3ce5c ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97
components") created a build-time dependency to SND_PXA2XX_LIB but
missed to reflect that in Kconfig.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
use list_head for sub_dais,
since original sub_dais array is sparsely occupied
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This platform is no longer needed on DT boards, so let's remove them to
avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97)
directly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the functions are now available through pxa2xx-lib, hook them up
to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs
without a platform driver.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new()
and pxa2xx_pcm_ops in pxa2xx-lib.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the namespace a bit and drop the __ prefix of all functions
exported by pxa2xx-lib. This improves the readability of the code.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the PXA SSP bits are ported over to generic DMA, the pxa2xx-pcm
code only has a single user left. This patch folds the remaining bits into
its only user and removes the unnecessary glue layer along with its header
file.
The include dependency to linux/dma/pxa-dma.h is also gone now.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend dpcm_merge_chan to also check backend cpu dai channels
capabilities. Apply the same policy as soc_pcm_init_runtime_hw() for
multicodec links and only check cpu dai in this case.
Cc: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The > should be >= or we could read one element beyond the end of the
port_maps[] array.
Fixes: 7fa2d70f97 ("ASoC: qdsp6: q6afe: Add q6afe driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As it is, dpcm_runtime_update() performs the old path and new path
update of a frontend before going on to the next frontend DAI.
Depending the order of the FEs within the rtd list, the result of
the update might be different.
For example:
* Frontend A connected to backend C, with a 48kHz playback
* Frontend B connected to backend D, with a 44.1kHz playback
* FE A appears before FE B in the rtd list of the card.
If we reparent BE C to FE B (disconnecting BE D):
* old path update of FE A will run first, and BE C will get hw_free()
and shutdown()
* new path update of FE B will run after and BE C, which is stopped,
so it will be configured at 44.1kHz, as expected
If we reparent BE D to FE A (disconnecting BE C):
* new path update of FE A will run first but since BE D is still running
at 44.1kHz, it won't be reconfigured (no call to startup() or
hw_params())
* old path update of FE B runs after, nothing happens
* In this case, we end up with a BE playing at 44.1kHz a stream which is
supposed to be played at 48Khz (too slow)
To improve this situation, this patch performs all the FE old paths update
before going on to update the new paths. With this, the result should
no longer depend on the order of the FE within the card rtd list.
Please note that there might be a small performance penalty since
dpcm_process_paths() is called twice per stream direction.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add extended ops in the hdac_bus to allow calling the ASoC HDAC library
ops to reuse the legacy HDA codec drivers with ASoC framework.
Extended ops are used by the legacy codec drivers to call into
hdac_hda library, in the subsequent patches..
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove memory allocation within snd_hdac_ext_bus_device_init, to make
its behaviour identical to snd_hdac_bus_device_init. So that caller
can allocate the parent data structure containing hdac_device.
This API change helps in reusing the legacy HDA codec drivers with
ASoC platform drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the hdac_ext_driver structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the hdac_ext_bus structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.
Follow-up patches in this series handle the driver definition.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the hdac_ext_device structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.
Follow-up patches in this series handle the bus and driver definitions.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add simple-audio-amplifier to the list of available compatible
Suggested-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dio2125 is simple enough that we can make it a generic component.
Just rename and sed the dio2125 amplifier driver to simple_amplifier.
Suggested-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As we get more entries in the DMI quirk table it is nice to have some
sort of ordering in the table, sort it alphabetically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
One some models (Chuwi Vi8 Plus, Chuwi Hi8 Pro) the headphone output has
left and right swapped. This can be fixed in with special mixer settings
in the UCM profile, bit this requires these devices loading a different
UCM profile.
This commit adds a BYT_RT5651_HP_LR_SWAPPED quirk for this and postfixes
the longname with "-hp-swapped" if set, so that a different UCM profile
will be loaded.
We can safely do this without causing regressions (UCM profile not found
due to the longname change) as the UCM profiles are not in upstream
alsa-lib yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the headset-mic is always IN3 there is no reason to have
the headset-mic mapping in the long-name.
This commit simplifies the long name to "bytcr-rt5651-<intmic-map>-mic".
We can safely do this without causing regressions (UCM profile not found
due to the longname change) as the UCM profiles are not in upstream
alsa-lib yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial bytcr_rt5651 machine driver commit mapped IN2 as the headset
mic. In retrospect this is not correct as all known boards have the headset
mic on IN3.
This commit fixes the original DMIC mapping to correctly have the headset
mic on IN3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial bytcr_rt5651 machine driver commit mapped IN2 as the headset
mic. In retrospect this is not correct as all known boards have the headset
mic on IN3. To workaround this special IN?_HS_IN3 mappings were added.
This commit fixes the original IN1 mapping to correctly have the headset
mic on IN3, moves all users of the IN1_HS_IN3 mapping over to the fixed
IN1_MAP and drops the now no longer needed IN1_HS_IN3 mapping.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
BYT_RT5651_IN2_MAP was introduced in commit 39712db878 ("SoC: intel: byt:
Introduce new custom IN2 map"), uses in commit 2fe30129b0 ("ASoC: intel:
byt: Enable IN2 map quirk for a KIANO laptop"), only to be replaced by a
new BYT_RT5651_IN1_IN2_MAP quirk in commit ea261bd02a ("ASoC: intel:
byt: Introduce new map for dual mics") quickly afterwards, because the
KIANO laptop has 2 internal mics on IN1 and IN2 and the headset mic is
not in IN1 where the BYT_RT5651_IN2_MAP maps it, but on IN3.
Now that the KIANO quirk entry uses BYT_RT5651_IN1_IN2_MAP, there are no
users of BYT_RT5651_IN2_MAP left. This makes sense since the headset mic
seems to always be connected to IN3, so BYT_RT5651_IN2_MAP is not useful.
To deal with BYT_RT5651_IN2_MAP wrongly mapping the headset mic to IN1,
BYT_RT5651_IN2_HS_IN3_MAP was added in commit f026e06317 ("ASoC: Intel:
bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it"). This
was based on the assumption then some devices have the internal mic
connected to IN2 only. Further testing has shown that this is wrong and the
internal mic is always connected to IN1 and sometimes to both IN1 and IN2.
TL;DR: Both BYT_RT5651_IN2_MAP and BYT_RT5651_IN2_HS_IN3_MAP are based on
on wrong assumptions from the past and are no longer useful now, so they
can both be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the quirk logging code not logging the IN1_IN2_MAP quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Further testing on all 6 model x86 tablets with a rt5651 which I have
access to for testing has shown that their single (mono) microphone is
connected to both IN1 *and* IN2.
The previous default mapping of IN2 was based on testing on the same 6
tablets, where the internal mic works fine with a mapping of IN2. But it
works fine too with a mapping of IN1.
This commit changes the default input mapping to to use IN1 instead of
IN2, to match the mapping used for the other mono devices in the DMI quirk
table. So that we need less different mappings.
The same change is made to the Chuwi Vi8 Plus quirks, which is one of the
6 models tested.
This is a preparation patch for simplifying the maps in a follow-up commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Almost all boards use the mclk and use the same jack-detect settings, add
a BYT_RT5651_DEFAULT_QUIRKS define for this.
This shaves of some lines and makes it easier to see which settings are
unique to a certain model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
pcmdev in struct q6asm seems be left over and unused, so just remove it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
q6adm_open can return error pointer or a null in error cases.
Fix the return handling.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
module owner is already set in platform_driver_register(), so remove this
redundant assignment.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch uses new compatible string to make DT based module loading work.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch uses new compatible string to make DT based module loading work.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch uses new compatible string to make DT based module loading work.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the child nodes have there own compatible strings,
Use of_platform_populate/depopulate() instead of less common
of_platform_device_create()/destroy().
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the child nodes have there own compatible strings,
Use of_platform_populate/depopulate() instead of less common
of_platform_device_create()/destroy().
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the child nodes have there own compatible strings,
Use of_platform_populate/depopulate() instead of less common
of_platform_device_create()/destroy().
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In its current shape, the driver just ignores errors returned by
regulator_get() at component_probe(). This doesn't hurt on Amstrad
Delta board as long as it registers the codec device at late_initcall,
when the regulator which depends on basic-mmio-gpio device (probed as
late as at dev_initcall) is already available. Otherwise the driver
may end up trying to control a codec which is not powered up.
Remove that dependency on initialization order by handling the error.
If the regulator is not yet available and -ENODEV is returned, convert
it to -EPROBE_DEFER to get another chance.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current DPCM is caring only FE channel configuration. Sometimes
it will be trouble if user selects channel which isn't supported
by BE.
This patch adds new .dpcm_merged_chan on struct snd_soc_dai_link.
DPCM will use FE / BE merged channel if struct snd_soc_dai_link
has it.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ST/CZ SoC have 2 channels for capture in the I2SSP path.
The DMA though these channels is done using the same dma
descriptors.
We configure the channel and enable it on the basis of
channel selected by machine driver. Machine driver knows
which codec sits on which channel and thus sends the information
to dma driver.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a correction to match acutal hardware configuration.
The hardware configuration looks like:
I2S_BT -> SPK(Max) + DMIC(Adau)
I2S_SP -> DA7219 Headset
No actual products have been shipped with previous configuration.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes redudant check of PLL ID. struct uniphier_aio_pll
enable member has already been checked at is_valid_pll().
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Using devm_snd_soc_register_component() and drop all of the code
related to .remove hook.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Using devm_snd_soc_register_component() and drop all of the code
related to .remove hook.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Somehow I missed the Nau8824 support which was added in 4.17. Oops
Fixes: 4f722a6a73 ("ASoC: Intel: common: rename 'reef' to 'sof' in ACPI matching table")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with firmware tools, no functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code is not setting the compressed IRQ as a wake
source. Normally this doesn't cause any issues as the CODEC
IRQ is set as a wake source by the jack detection code and the
CODEC only produces a single IRQ line. However if the system
is not using jack detection the compressed audio IRQ should
still function as a wake source, as such directly set the
compressed audio IRQ as a wake source.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code that reads the algorithm list from the DSP is
somewhat unclear, it converts directly from bytes to registers using
a hard coded divide by 2. Most offsets are usually handled in DSP
words within the driver and there is a function specifically for
converting from words to register addresses. So update the handling
to use these. This also removes the assumption that the registers
are 16-bit word addressed, which will no longer be true on some of
our newer parts.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the core will continue processing open/hw_params
component callbacks after one has failed even though it will abort
immediately afterwards. This is unnecessary and also has the issue
that close/hw_free will be called on the component which failed
open/hw_params which could result in issues if the driver doesn't
expect this behaviour.
Update the core to abort processing open/hw_params when an error
is hit and only call close/hw_free for those components that were
successfully opened.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two commercially-available Broadwell platforms based on I2S
(Dell XPS13 and 'Samus' Pixel 2015 Chromebook).
Fix a copy/paste issue to allow each platform to enable different
features if needed when SOF is enabled
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
While we are at it, add entries for machine drivers that are used on
SOF-based platforms. The drivers will be submitted upstream after the
core SOF patches, but there's no harm in adding these references now.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change for Skylake driver, add relevant names needed
by SOF for BXT/APL, GLK and CNL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just move to common tables to make it easier
to deal with SOF and share the same machine drivers - as done
previously for BYT/CHT/HSW/BDW.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to deal with DMICs if the DSP is not present and
there is no ACPI machine ID found.
Simplify before moving these ACPI tables to sound/soc/intel/common
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use truncated names in bxt id table and bxt_da7219_max98357a machine
as platform device id table expects names to be less then 20chars.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
platform support fixed constraint hw_prams as Stereo, 48KHz, 16 bits.
This fixed the headset mic recorded noise due to mono capturing
request from some apps. e.g. online Voice Recorder
Signed-off-by: Louis Collard <louiscollard@google.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.
This specifically means that :
- for platform data based machines, the DMA requestor channels are
extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
ssp.<N>, and the channels are either "rx" or "tx".
- for device tree platforms, the dma node should be hooked into the
pxa2xx-ac97 or pxa-ssp-dai node.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Mack <daniel@zonque.org>
Change the over-current detect threshold on the Acer Iconia 8 from
2000ua to 1500uA, this fixes headset button presses not being detected.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Nuvison/TMax TM800W560 tablet, this tablet uses IN1
for the internal mic rather then the default IN3 and it uses JD2 rather
then JD1 for its not-inverted jack-detect switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
tegra_rt5677_probe() gets a couple of device nodes with of_parse_phandle(),
but there is no release of them.
The patch adds the release to tegra_rt5677_remove() and
to error handling paths in the probe.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the devicetree support, so that the driver can be used in a
devictree platform.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Work is guaranteed to be initialized on exit. Drop the unnecessary
if statement and always call flush_work.
This fixes a warning seen with clang:
sound/soc/codecs/pcm1789.c:265:13: warning: address of 'priv->work' will
always evaluate to 'true' [-Wpointer-bool-conversion]
if (&priv->work)
~~ ~~~~~~^~~~
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add headphone auto switching controls
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
These aren't needed and some userspace apps don't work consistently with
them.
Remove Playback/Capture from control names
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The structure soc_codec_dev_ak4458 is local to the source and do not
need to be in global scope and can be const, make it static const.
Cleans up sparse warnings:
warning: symbol 'soc_codec_dev_ak4458' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The structure ak5558_pm and soc_codec_dev_ak5558 are local to the
source and do not need to be in global scope, so make them static.
Also make soc_codec_dev_ak5558 static.
Cleans up sparse warnings:
warning: symbol 'ak5558_pm' was not declared. Should it be static?
warning: symbol 'soc_codec_dev_ak5558' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pointer dmic_codec_dev is local to the source and does not need
to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'dmic_codec_dev' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card is retrieved as device drvdata during unbind().
Set it as drvdata during bind() to avoid memory corruption during
unbind().
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd priv has many parameters. On __rsnd_dai_probe() it uses
rsnd_rdai_get() to get rdai pointer, but is using priv->daidrv
directly to get daidrvhv, but it is confusable for reader.
This patch adds rsnd_daidrv_get() to get daidrv from priv.
Now reader can understand that rdai and daidrv are related.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds headphone and microphone jack detection gpios as same
as simple-card driver.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves headphone and microphone detection to probe() of
snd_soc_card from init() of snd_soc_dai_link. This is because init()
is called (and an input device /dev/input/eventX is created too)
twice or above if simple card has two or more DAI links.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves headphone and microphone jack detection gpios from
simple-card driver. It is preparing for using this feature from other
drivers.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Chuwi Vi10 tablet, this tablet uses IN1 for the
internal mic rather then the default IN3 and it uses JD2 rather
then JD1 for its jack-detect switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With gcc 4.1.2:
sound/soc/codecs/rt1305.c: In function ‘rt1305_calibrate’:
sound/soc/codecs/rt1305.c:1069: warning: integer constant is too large for ‘long’ type
sound/soc/codecs/rt1305.c:1086: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" suffixes to fix this.
Fixes: 29bc643ddd ("ASoC: rt1305: Add RT1305/RT1306 amplifier driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch makes the rockchip i2s pcm configurable by adding
rockchip pcm config for devm_snd_dmaengine_pcm_register.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_rk_mc_probe() gets a couple of device nodes with of_parse_phandle(),
but there is no release of them.
The patch adds remove handler and proper error handling in the probe.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix crash in those platforms whose machine driver does not expose
platform_info. For those platforms we rely on default value and
select I2SSP channel.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st
channel polarity (low or hi). This bit shouldn't exchange after running.
Current SSI "parent" doesn't care SSICR, just controls clock only.
Because of this behavior, if platform uses SSI0 as playback,
SSI1 as capture, and if user starts capture -> playback order,
SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes
capture noise.
This patch cares SSICR on SSI parent, too.
Special thanks to Yokoyama-san
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If SSIs are sharing WS pin, it should has .symmetric_rates.
This patch sets it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidyup incoherence between MODULE_LICENSE and header license, too
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidyup incoherence between MODULE_LICENSE and header license, too
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidyup incoherence between MODULE_LICENSE and header license, too
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidyup incoherence between MODULE_LICENSE and header license, too
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidyup incoherence between MODULE_LICENSE and header license, too
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a callback fro clients for notification about DAPM route loading and
unloading.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Give topology clients more access to the topology data by passing index,
pcm, link_config and dai_driver to clients. This allows clients to fully
instantiate and track topology objects.
The SOF driver is the first user of these new APIs and needs them to build
component topology driver and FW objects.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometime a component or topology may configure a DAI widget with no
private data leading to a dev_dbg() dereferencne of this data.
Fix this to check for non NULL private data and let users know if widget
is missing DAI.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
AtfvEeaPHaOyD8/h2Q==
=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
Here are the main updates for SoC support (besides DT additions) for ARM
32- and 64-bit platforms. The branch also contains defconfig updates to
turn on drivers and options as needed on the various platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products.
-----BEGIN PGP SIGNATURE-----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=S5wc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Here are the main updates for SoC support (besides DT additions) for
ARM 32- and 64-bit platforms. The branch also contains defconfig
updates to turn on drivers and options as needed on the various
platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
MAINTAINERS: add NXP linux team maillist as i.MX reviewer
ARM: stm32: Don't select DMA unconditionally on STM32MP157C
arm64: defconfig: Enable PCIe on msm8996 and db820c
ARM: pxa3xx: enable external wakeup pins
ARM: pxa: stargate2: use device properties for at24 eeprom
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
arm64: defconfig: Enable UFS on msm8996
ARM: berlin: switch to SPDX license identifier
arm: berlin: remove non-necessary flush_cache_all()
ARM: berlin: extend BG2CD Kconfig entry
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
bus: ti-sysc: Fix optional clocks array access
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
...
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g
8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J
2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej
jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ
YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL
u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A
m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4
bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61
jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS
S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa
3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04
KCDVLYPxwQQqK1Mqig==
=/3L8
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"This adds the new overflow checking helpers and adds them to the
2-factor argument allocators. And this adds the saturating size
helpers and does a treewide replacement for the struct_size() usage.
Additionally this adds the overflow testing modules to make sure
everything works.
I'm still working on the treewide replacements for allocators with
"simple" multiplied arguments:
*alloc(a * b, ...) -> *alloc_array(a, b, ...)
and
*zalloc(a * b, ...) -> *calloc(a, b, ...)
as well as the more complex cases, but that's separable from this
portion of the series. I expect to have the rest sent before -rc1
closes; there are a lot of messy cases to clean up.
Summary:
- Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)"
* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use struct_size() for devm_kmalloc() and friends
treewide: Use struct_size() for vmalloc()-family
treewide: Use struct_size() for kmalloc()-family
device: Use overflow helpers for devm_kmalloc()
mm: Use overflow helpers in kvmalloc()
mm: Use overflow helpers in kmalloc_array*()
test_overflow: Add memory allocation overflow tests
overflow.h: Add allocation size calculation helpers
test_overflow: Report test failures
test_overflow: macrofy some more, do more tests for free
lib: add runtime test of check_*_overflow functions
compiler.h: enable builtin overflow checkers and add fallback code
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:
// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
// sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@
- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)
// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@
- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>
This is a very big update, mainly due to a huge set of new drivers some
of which are individually very large. We also have a lot of fixes for
the topology stuff, several of the users have stepped up and fixed some
the serious issues there, and continued progress on the transition away
from CODEC specific drivers to generic component drivers.
- Many fixes for the topology code, including fixes for the half done
v4 ABI compatibility from Guenter Roeck and other ABI fixes from
Kirill Marinushkin.
- Lots of cleanup for Intel platforms based on Realtek CODECs from Hans
de Goode.
- More followups on removing legacy CODEC things and transitioning to
components from Morimoto-san.
- Conversion of OMAP DMA to the new, more standard SDMA-PCM driver.
- A series of fixes and updates to the rather elderly Cirrus Logic SoC
drivers from Alexander Sverdlin.
- Qualcomm DSP support from Srinivas Kandagatla.
- New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and
RT5668 and TI TSCS454
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlsWonITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KBaB/sHLhq0NwDC+9sHEtFJLB2BvinShIm4
aPk54T930r/aHZ3aht+qWWU9DTBA5VcaLXVxGJ6J2KrZ8QGOiUAt9QG6kiOb/ltE
8ORJfsYsRpFSBMPqae/92uxV4WDYLpC1G/ty+VLY8Balp24nDvbrV6oo+xhNTDWW
wwWVPQkLSDF29EgZJc5zX/PxrjuPSkawRe28P0GI/exXkaP7i8HNmgEl1nlOEgzs
PiZW7YzsA/6VjSUtYMKWDlXmhkDpb/A/7bGa7JzQZEtN5zM8512gyQ12Hhkrrqn4
0MvcUUPCw+tBj0A/sdpsPSf476eQ0SUbU85JF2r8sVNpeChb6Su9Q7WI
=OuIx
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.18
This is a very big update, mainly due to a huge set of new drivers some
of which are individually very large. We also have a lot of fixes for
the topology stuff, several of the users have stepped up and fixed some
the serious issues there, and continued progress on the transition away
from CODEC specific drivers to generic component drivers.
- Many fixes for the topology code, including fixes for the half done
v4 ABI compatibility from Guenter Roeck and other ABI fixes from
Kirill Marinushkin.
- Lots of cleanup for Intel platforms based on Realtek CODECs from Hans
de Goode.
- More followups on removing legacy CODEC things and transitioning to
components from Morimoto-san.
- Conversion of OMAP DMA to the new, more standard SDMA-PCM driver.
- A series of fixes and updates to the rather elderly Cirrus Logic SoC
drivers from Alexander Sverdlin.
- Qualcomm DSP support from Srinivas Kandagatla.
- New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek
MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and
RT5668 and TI TSCS454
