Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.
Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com
When vgpu ptr is unavailable, the drm_WARN* can hang the whole system
due to the drm pointer is NULL. This patch fixes this issue by using
WARN directly which won't care about the drm pointer.
Fixes: 12d5861973 ("drm/i915/gvt: Make WARN* drm specific where vgpu ptr is available")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-1-tina.zhang@intel.com
Commit 60c6a14b48 ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
Fixes: 60c6a14b48 ("drm/i915/display: Force the state compute phase once to enable PSR")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151
Tested-by: Ross Zwisler <zwisler@google.com>
Reported-by: Ross Zwisler <zwisler@google.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
$(CC) with $(CFLAGS_GCOV) assumes the output filename with .gcno suffix
appended is writable. This is not the case when the output filename is
/dev/null:
HDRTEST drivers/gpu/drm/i915/display/intel_frontbuffer.h
/dev/null:1:0: error: cannot open /dev/null.gcno
HDRTEST drivers/gpu/drm/i915/display/intel_ddi.h
/dev/null:1:0: error: cannot open /dev/null.gcno
make[5]: *** [../drivers/gpu/drm/i915/Makefile:307:
drivers/gpu/drm/i915/display/intel_ddi.hdrtest] Error 1
make[5]: *** Waiting for unfinished jobs....
make[5]: *** [../drivers/gpu/drm/i915/Makefile:307:
drivers/gpu/drm/i915/display/intel_frontbuffer.hdrtest] Error 1
Filter out $(CFLAGS_GVOC) from the header test $(c_flags) as they don't
make sense here anyway.
References: http://lore.kernel.org/r/d8112767-4089-4c58-d7d3-2ce03139858a@infradead.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: c6d4a099a2 ("drm/i915: reimplement header test feature")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221105414.14358-1-jani.nikula@intel.com
Restore the previous WARN_ON(cond) so that we don't complain about poor
old Cherryview.
Fixes: eb020ca3d4 ("drm/i915/display/dp: Make WARN* drm specific where drm_device ptr is available")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223173959.3885742-1-chris@chris-wilson.co.uk
Drm specific drm_WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device struct pointer is readily
available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
@@
identifier func, T;
@@
func(struct intel_vgpu *T,...) {
+struct drm_i915_private *i915 = T->gvt->dev_priv;
<+...
(
-WARN(
+drm_WARN(&i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>
}
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200220165507.16823-9-pankaj.laxminarayan.bharadiya@intel.com
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
drivers/gpu/drm/i915/display/intel_display.c:12963:17: warning: statement will never be executed [-Wswitch-unreachable]
12963 | unsigned int port_mask;
| ^~~~~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_get_fifo_size’:
drivers/gpu/drm/i915/intel_pm.c:474:7: warning: statement will never be executed [-Wswitch-unreachable]
474 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_atomic_update_fifo’:
drivers/gpu/drm/i915/intel_pm.c:1997:7: warning: statement will never be executed [-Wswitch-unreachable]
1997 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/202002201602.92CADF7D@keescook
Ensure const data goes to rodata.
Fixes: ff2cd8635e ("drm/i915: Correctly map DBUF slices to pipes")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219154542.19574-1-jani.nikula@intel.com
Pair the irq install and uninstall in the same layer. There are no
functional changes in the happy day scenario. The cleanup paths are
currently a mess though.
Note that modeset probe pre-irq + post-irq install are matched by
modeset driver remove pre-irq + post-irq uninstall, together, but not
independently. They are not symmetric pairs.
v2: don't add a new probe failure point here
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219133756.13224-1-jani.nikula@intel.com
Variable dw is being initialized with a value that is never read,
it is assigned a new value later on. The assignment is redundant
and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200222134755.134209-1-colin.king@canonical.com
Upon unregistering the user interface, we mark the GPU as wedged to
ensure we push no new work to the GPU, and to flush all current work
from the GPU. Move this call to the GT backend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221235135.2883006-1-chris@chris-wilson.co.uk
We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.
v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)
Bspec: 52890
Bspec: 50044
Fixes: 3fa01d642f ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Attempting to bind / unbind module from devices where we have both
integrated and discreete GPU handled by i915, will cause us to try and
double free the global state, hitting null ptr deref in free_event_attributes.
Let's move it to i915_pmu.
Fixes: 05488673a4 ("drm/i915/pmu: Support multiple GPUs")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-2-michal.winiarski@intel.com
Attempting to bind / unbind module from devices where we have both
integrated and discreete GPU handled by i915 can lead to leaks and
warnings from cpuhp:
Error: Removing state XXX which has instances left.
Let's move the state to i915_pmu.
Fixes: 05488673a4 ("drm/i915/pmu: Support multiple GPUs")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-1-michal.winiarski@intel.com
Manual conversion of instances of printk based drm logging macros to the
struct drm_device based logging macros in i915/i915_perf.c.
Also involves extraction of the struct drm_i915_private device from
various intel types for use in the macros.
Instances of the DRM_DEBUG printk macro were not converted due to the
lack of an analogous struct drm_device based logging macro.
v2: remove instances of DRM_DEBUG that were converted.
References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218173936.19664-1-wambui.karugax@gmail.com
On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL
during display initialization, but on gen12 we're now supposed to
program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well.
v2:
- Program registers with rmw to preserve contents of unrelated bits.
- Switch to the new display uncore helpers.
Bspec: 49213
Bspec: 50096
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-2-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.
Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
We have to write quite a few registers when programming the
pipe scaler. Let's use intel_de_write_fw() for these to reduce
the lockdep overhead a bit. All plane registers (including plane
scaler) already do this.
We already had a few accidental intel_de_write_fw() in there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212161738.28141-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we only set the DRM_CONNECTOR_POLL_{DISCONNECT,CONNECT}
bits in intel_connector->polled (the base setting), leading to
some confusing looking code to reset drm_connector->polled
(the actual setting) to DRM_CONNECTOR_POLL_HPD. Let's set
intel_connector->polled = DRM_CONNECTOR_POLL_HPD for all hpd
capable connectors, and then we don't need so many special
cases in the hotplug code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205183546.9291-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No point in looping over all connectors for each hpd pin. Just loop
over each connector first and deal with each one's hpd pin. Then
loop over all the hpd pins to mark them as enabled again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200205183546.9291-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkEjOgAKCRDj7w1vZxhR
xeaDAQD+1MludG4RmfQhATe4jTsPC1r2x63OF2CA0ChMGHXJyQEA8qqQ+8y1Cd/u
PZ3PpcTl4qYYHgzJ6FwW7kDPTvlaZQE=
=IJAt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
We are quite trigger happy in cleaning up the firmware blobs, as we do
so from several error/fini paths in GuC/HuC/uC code. We do have the
__uc_cleanup_firmwares cleanup function, which unwinds
__uc_fetch_firmwares and is already called both from the error path of
gem_init and from gem_driver_release, so let's stop cleaning up from
all the other paths.
The fact that we're not cleaning the firmware immediately means that
we can't consider firmware availability as an indication of
initialization success. A "LOADABLE" status has been added to
indicate that the initialization was successful, to be used to
selectively load HuC only if HuC init has completed (HuC init failure
is not considered a fatal error).
v2: s/ready_to_load/loadable (Michal), only run guc/huc_fini if the
fw is in loadable state
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-9-daniele.ceraolospurio@intel.com
Now that we can differentiate wants vs uses GuC/HuC, intel_uc_init is
restricted to running only if we have successfully fetched the required
blob(s) and are committed to using the microcontroller(s).
The only remaining thing that can go wrong in uc_init is the allocation
of GuC/HuC related objects; if we get such a failure better to bail out
immediately instead of wedging later, like we do for e.g.
intel_engines_init, since without objects we can't use the HW, including
not being able to attempt the firmware load.
While at it, remove the unneeded fw_cleanup call (this is handled
outside of gt_init) and add a probe failure injection point for testing.
Also, update the logs for <g/h>uc_init failures to probe_failure() since
they will cause the driver load to fail.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-8-daniele.ceraolospurio@intel.com
To be able to differentiate the before and after of our commitment to
GuC submission, which will be used in follow-up patches to early set-up
the submission structures.
v2: move functions to guc_submission.h (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-7-daniele.ceraolospurio@intel.com
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
We want to map uC-level checks to GuC/HuC-level ones. The mapping from
the uC state to the GuC/HuC one follows the same pattern for all the
functions:
uc_xxx_guc() -> guc_is_yyy()
So we can easily use a macro to autogenerate the functions via macros by
passing in the 2 mapped states.
v2: Split this change to its own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-5-daniele.ceraolospurio@intel.com
In a follow up patch we will rely on the fact that the status always
moves away from "SELECTED" after the fetch is attempted to decide what
to do with the GuC.
v2: Split this change to its own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-4-daniele.ceraolospurio@intel.com
use intel_uc_uses_guc_submission() directly instead, to be consistent in
the way we check what we want to do with the GuC.
v2: do not go through ctx->vm->gt, use i915->gt instead
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-3-daniele.ceraolospurio@intel.com
use intel_uc_uses_guc() directly instead, to be consistent in the way we
check what we want to do with the GuC.
v2: split guc_log_info changes to their own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-2-daniele.ceraolospurio@intel.com
The log struct is the only thing the function needs (apart from
the seq_file), so we can pass just that instead of the whole dev_priv.
v2: Split this change to its own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-1-daniele.ceraolospurio@intel.com
In preparation for making GEM execbuf parallel, we need to be prepared
to handle very early declaration of dependencies -- even before our
signaler has itself been submitted.
References: a79ca656b6 ("drm/i915: Push the wakeref->count deferral to the backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220123608.1666271-1-chris@chris-wilson.co.uk
