Commit Graph

771 Commits

Author SHA1 Message Date
Linus Torvalds
3796958130 Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...
2008-02-07 09:02:26 -08:00
Josh Boyer
256ae6a720 Merge branch 'virtex-for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.25 2008-02-06 21:06:45 -06:00
Geert Uytterhoeven
5ceadd2a2a Atari floppy: Rename disk_type to atari_disk_type
Commit edfaa7c365

    Driver core: convert block from raw kobjects to core devices

    This moves the block devices to /sys/class/block. It will create a
    flat list of all block devices, with the disks and partitions in one
    directory. For compatibility /sys/block is created and contains symlinks
    to the disks.

introduced a global disk_type variable in <linux/genhd.h>, causing the
following compile error on Atari:

    drivers/block/ataflop.c:93: error: conflicting types for 'disk_type'
    include/linux/genhd.h:21: error: previous declaration of 'disk_type' was here

Rename the local disk_type variable in drivers/block/ataflop.c to
atari_disk_type, to avoid the conflict.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:10 -08:00
Randy Dunlap
582539e5a0 cciss: use upper_32_bits() macro to eliminate warnings
Use upper_32_bits(x) macro to handle shifts that may be >= the width of
the data type.

drivers/block/cciss.c: In function 'do_cciss_request':
drivers/block/cciss.c:2655: warning: right shift count >= width of type
drivers/block/cciss.c:2656: warning: right shift count >= width of type
drivers/block/cciss.c:2657: warning: right shift count >= width of type
drivers/block/cciss.c:2658: warning: right shift count >= width of type

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:03 -08:00
Robert P. J. Day
67a3b2b6ce rd: use is_power_of_2() in drivers/block/rd.c.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:03 -08:00
David Woodhouse
96c5865559 Allow auto-destruction of loop devices
This allows a flag to be set on loop devices so that when they are
closed for the last time, they'll self-destruct.

In general, so that we can automatically allocate loop devices (as with
losetup -f) and have them disappear when we're done with them.

In particular, right now, so that we can stop relying on the hackish
special-case in umount(8) which kills off loop devices which were set up by
'mount -oloop'.  That means we can stop putting crap in /etc/mtab which
doesn't belong there, which means it can be a symlink to /proc/mounts, which
means yet another writable file on the root filesystem is eliminated and the
'stateless' folks get happier...  and OLPC trac #356 can be closed.

The mount(8) side of that is at
http://marc.info/?l=util-linux-ng&m=119362955431694&w=2

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Bernardo Innocenti <bernie@codewiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Alexey Dobriyan
eaa0ff15c3 fix ! versus & precedence in various places
Fix various instances of

	if (!expr & mask)

which should probably have been

	if (!(expr & mask))

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:40:59 -08:00
Stephen Neuendorffer
0e349b0e2d [POWERPC] Xilinx: Update compatible to use values generated by BSP generator.
Mainly, this involves two changes:
1) xilinx->xlnx (recognized standard is to use the stock ticker)
2) In order to have the device tree focus on describing what the
hardware is as exactly as possible, the compatible strings contain the
full IP name and IP version.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-06 10:23:21 -07:00
Grant Likely
911a317599 [POWERPC] Fix incorrectly tagged __devinitdata structures
Fix compile errors in the xilinxfb, xsysace and uartlite drivers used
by the Xilinx Virtex platform

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
2008-02-06 10:23:12 -07:00
Linus Torvalds
93890b71a3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits)
  virtio: balloon driver
  virtio: Use PCI revision field to indicate virtio PCI ABI version
  virtio: PCI device
  virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
  virtio_blk: Dont waste major numbers
  virtio_blk: provide getgeo
  virtio_net: parametrize the napi_weight for virtio receive queue.
  virtio: free transmit skbs when notified, not on next xmit.
  virtio: flush buffers on open
  virtnet: remove double ether_setup
  virtio: Allow virtio to be modular and used by modules
  virtio: Use the sg_phys convenience function.
  virtio: Put the virtio under the virtualization menu
  virtio: handle interrupts after callbacks turned off
  virtio: reset function
  virtio: populate network rings in the probe routine, not open
  virtio: Tweak virtio_net defines
  virtio: Net header needs hdr_len
  virtio: remove unused id field from struct virtio_blk_outhdr
  virtio: clarify NO_NOTIFY flag usage
  ...
2008-02-04 08:00:54 -08:00
Christian Borntraeger
d50ed907dc virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
Am Freitag, 1. Februar 2008 schrieb Christian Borntraeger:
> Right. I will fix that with an additional patch.

This patch goes on top of the minor number patch. Please let me know if
you want a merged patch:

Currently virtio_blk creates the disk name combinging "vd"  with 'a'++.
This will give strange names after vdz. I have implemented names up to
vdzzz - inspired by the sd.c code. That should be sufficient for now.

There is one driver in the kernel (driver/s390/block/dasd_genhd.c) that
implements names from dasda-dasdzzzz allowing even more disks. Maybe
a janitor can come up with a common implementation usable for all kind
of block device drivers.

I have tested this patch with 100 disks - seems to work.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:11 +11:00
Christian Borntraeger
4f3bf19c6e virtio_blk: Dont waste major numbers
Rusty,

currently virtio_blk uses one major number per device. While this works
quite well on most systems it is wasteful and will exhaust major numbers
on larger installations.

This patch allocates a major number on init and will use 16 minor numbers
for each disk. That will allow ~64k virtio_blk disks.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:10 +11:00
Christian Borntraeger
135da0b037 virtio_blk: provide getgeo
Rusty,

I currently try to make my guest boot from an virtio root device
without having an external kernel. Some of the tools that I tried
expect HDIO_GETGEO to work. The most interesting value is likely
the geo.start value to get the offset of a partition. This value
is filled by block/ioctl.c if fops->getgeo is set. This patch also
fills in some standard values for heads, sectors and cylinders.

Makes sense?

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:09 +11:00
Anthony Liguori
0ad07ec1fd virtio: Put the virtio under the virtualization menu
This patch moves virtio under the virtualization menu and changes virtio
devices to not claim to only be for lguest.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:05 +11:00
Rusty Russell
6e5aa7efb2 virtio: reset function
A reset function solves three problems:

1) It allows us to renegotiate features, eg. if we want to upgrade a
   guest driver without rebooting the guest.

2) It gives us a clean way of shutting down virtqueues: after a reset,
   we know that the buffers won't be used by the host, and

3) It helps the guest recover from messed-up drivers.

So we remove the ->shutdown hook, and the only way we now remove
feature bits is via reset.

We leave it to the driver to do the reset before it deletes queues:
the balloon driver, for example, needs to chat to the host in its
remove function.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:03 +11:00
Rusty Russell
18445c4d50 virtio: explicit enable_cb/disable_cb rather than callback return.
It seems that virtio_net wants to disable callbacks (interrupts) before
calling netif_rx_schedule(), so we can't use the return value to do so.

Rename "restart" to "cb_enable" and introduce "cb_disable" hook: callback
now returns void, rather than a boolean.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:49:58 +11:00
Rusty Russell
a586d4f601 virtio: simplify config mechanism.
Previously we used a type/len pair within the config space, but this
seems overkill.  We now simply define a structure which represents the
layout in the config space: the config space can now only be extended
at the end.

The main driver-visible changes:
1) We indicate what fields are present with an explicit feature bit.
2) Virtqueues are explicitly numbered, and not in the config space.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:49:57 +11:00
Joe Perches
f66083c376 drivers/block/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:09:38 +02:00
Pete Zaitcev
eedffd12e0 USB: Remove unnecessary zeroing from ub
These zeroings were taken from usb-storage long time ago. I examined
the submission paths and usb_fill_bulk_urb and found them unnecessary.

Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 14:34:47 -08:00
Adrian Bunk
e30f98fcac block/sunvdc.c:print_version() must be __devinit
This patch fixes the following section mismatches:

<--  snip  -->

...
WARNING: drivers/block/sunvdc.o(.text+0xf0): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
WARNING: drivers/block/sunvdc.o(.text+0xf8): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01 09:26:32 +01:00
Jens Axboe
e7d9dc9cfd cciss: fix bug in overriding ->data_len before completion
For BLOCK_PC requests, we need that length for completing the request.
Andrew Vasquez <andrew.vasquez@qlogic.com> reported the following
oops

Hitting a consistent BUG() with recent Linus' linux-2.6.git:

	[   12.941428] ------------[ cut here ]------------
	[   12.944874] kernel BUG at drivers/block/cciss.c:1260!
	[   12.944874] invalid opcode: 0000 [1] SMP
	[   12.944874] CPU 0
	[   12.944874] Modules linked in:
	[   12.944874] Pid: 0, comm: swapper Not tainted 2.6.24 #43
	[   12.944874] RIP: 0010:[<ffffffff8039e43d>]  [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf
	[   12.944874] RSP: 0018:ffffffff8063aed0  EFLAGS: 00010202
	[   12.944874] RAX: 0000000000000001 RBX: ffff8100cf800010 RCX: ffff81042f1253b0
	[   12.944874] RDX: ffff81042de398f0 RSI: ffff81042de398f0 RDI: 0000000000000001
	[   12.944874] RBP: ffff81042daa0000 R08: ffff81042f1253b0 R09: 0000000000000001
	[   12.944874] R10: 00000000000000fe R11: 0000000000000000 R12: 0000000000000002
	[   12.944874] R13: 0000000000000001 R14: ffff8100cf800000 R15: ffff81042de398f0
	[   12.944874] FS:  0000000000000000(0000) GS:ffffffff805bb000(0000) knlGS:0000000000000000
	[   12.944874] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
	[   12.944874] CR2: 00002afed7eea340 CR3: 000000042dbba000 CR4: 00000000000006e0
	[   12.944874] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
	[   12.944874] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
	[   12.944874] Process swapper (pid: 0, threadinfo ffffffff805f4000, task ffffffff805624a0)
	[   12.944874] Stack:  0000000000000000 ffffffff8063af10 0000000000000001 ffffffff80632d60
	[   12.944874]  0000000000000000 000000000000000a ffffffff805bb900 ffffffff8032038f
	[   12.944874]  ffffffff8063af10 ffffffff8063af10 ffffffff805bb940 ffffffff802346b4
	[   12.944874] Call Trace:
	[   12.944874]  <IRQ>  [<ffffffff8032038f>] blk_done_softirq+0x69/0x78
	[   12.944874]  [<ffffffff802346b4>] __do_softirq+0x6f/0xd8
	[   12.944874]  [<ffffffff8020c45c>] call_softirq+0x1c/0x30
	[   12.944874]  [<ffffffff8020e347>] do_softirq+0x30/0x80
	[   12.944874]  [<ffffffff8020e409>] do_IRQ+0x72/0xd9
	[   12.944874]  [<ffffffff8020a50a>] mwait_idle+0x0/0x46
	[   12.944874]  [<ffffffff8020a3da>] default_idle+0x0/0x3d
	[   12.944874]  [<ffffffff8020b7e1>] ret_from_intr+0x0/0xa
	[   12.944874]  <EOI>  [<ffffffff8020a54c>] mwait_idle+0x42/0x46
	[   12.944874]  [<ffffffff8020a481>] cpu_idle+0x6a/0xae
	[   12.944874]
	[   12.944874]
	[   12.944874] Code: 0f 0b eb fe 48 8d 85 d8 c0 00 00 48 89 04 24 48 89 c7 e8 e5
	[   12.944874] RIP  [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf
	[   12.944874]  RSP <ffffffff8063aed0>
	[   12.944903] ---[ end trace e9c631603f90d22f ]---

which is caused by blk_end_request() returning 'not done' for a request,
since it gets asked to complete zero bytes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29 21:55:18 +01:00
Jens Axboe
9bf722598f xsysace: end request handling fix
In ace_fsm_dostate(), the variable 'i' was used only for passing
sector size of the request to end_that_request_first().
So I removed it and changed the code to pass the size in bytes
directly to __blk_end_request()

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29 21:54:53 +01:00
Linus Torvalds
e189f3495c Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits)
  sh: add spi header and r2d platform data V3
  sh: update r7780rp interrupt code
  sh: remove consistent alloc stuff from the machine vector
  sh: use declared coherent memory for dreamcast pci ethernet adapter
  sh: declared coherent memory support V2
  sh: Add support for SDK7780 board.
  sh: constify function pointer tables
  sh: Kill off -traditional for linker script.
  cdrom: Add support for Sega Dreamcast GD-ROM.
  sh: Kill off hs7751rvoip reference from arch/sh/Kconfig.
  sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
  sh: Kill off dead HS771RVoIP board support.
  sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch.
  sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.
  sh: r2d - enable sm501 usb host function
  sh: remove voyagergx
  sh: r2d - add lcd planel timings to sm501 platform data
  sh: Add OHCI and UDC platform devices for SH7720.
  sh: intc - remove default interrupt priority tables
  sh: Correct pte size mismatch for X2 TLB.
  ...
2008-01-29 08:52:50 +11:00
Kiyoshi Ueda
a65b58663d blk_end_request: changing xsysace (take 4)
This patch converts xsysace to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

xsysace is a little bit different from "normal" drivers.
xsysace driver has a state machine in it.
It calls end_that_request_first() and end_that_request_last()
from different states. (ACE_FSM_STATE_REQ_TRANSFER and
ACE_FSM_STATE_REQ_COMPLETE, respectively.)

However, those states are consecutive and without any interruption
inbetween.
So we can just follow the standard conversion rule (b) mentioned in
the patch subject "[PATCH 01/30] blk_end_request: add new request
completion interface".

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:37:20 +01:00
Kiyoshi Ueda
7d699bafe2 blk_end_request: changing ub (take 4)
This patch converts ub to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:37:17 +01:00
Kiyoshi Ueda
ea6f06f416 blk_end_request: changing cpqarray (take 4)
This patch converts cpqarray to use blk_end_request interfaces.
Related 'ok' arguments are converted to 'error'.

cpqarray is a little bit different from "normal" drivers.
cpqarray directly calls bio_endio() and disk_stat_add()
when completing request.  But those can be replaced with
__end_that_request_first().
After the replacement, request completion procedures of
those drivers become like the following:
    o end_that_request_first()
    o add_disk_randomness()
    o end_that_request_last()
This can be converted to __blk_end_request() by following
the rule (b) mentioned in the patch subject
"[PATCH 01/30] blk_end_request: add new request completion interface".

Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:37:00 +01:00
Kiyoshi Ueda
3daeea29f9 blk_end_request: changing cciss (take 4)
This patch converts cciss to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

cciss is a little bit different from "normal" drivers.
cciss directly calls bio_endio() and disk_stat_add()
when completing request.  But those can be replaced with
__end_that_request_first().
After the replacement, request completion procedures of
those drivers become like the following:
    o end_that_request_first()
    o add_disk_randomness()
    o end_that_request_last()
This can be converted to blk_end_request() by following
the rule (a) mentioned in the patch subject
"[PATCH 01/30] blk_end_request: add new request completion interface".

Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:58 +01:00
Kiyoshi Ueda
f530f03637 blk_end_request: changing xen-blkfront (take 4)
This patch converts xen-blkfront to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:46 +01:00
Kiyoshi Ueda
b2aec24ea4 blk_end_request: changing viodasd (take 4)
This patch converts viodasd to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

As a result, the interface of internal function, viodasd_end_request(),
is changed.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:44 +01:00
Kiyoshi Ueda
a9c73d05f1 blk_end_request: changing sx8 (take 4)
This patch converts sx8 to use blk_end_request interfaces.
Related 'uptodate' and 'is_ok' arguments are converted to 'error'.

As a result, the interfaces of internal functions below are changed.
  o carm_end_request_queued
  o carm_end_rq
  o carm_handle_array_info
  o carm_handle_scan_chan
  o carm_handle_generic
  o carm_handle_rw

The 'is_ok' is set at only one place in carm_handle_resp() below:

	int is_ok = (status == RMSG_OK);

And the value is propagated to all functions above, and no modification
in other places.
So the actual conversion of the 'is_ok' is done at only one place above.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:42 +01:00
Kiyoshi Ueda
5047c3c64e blk_end_request: changing sunvdc (take 4)
This patch converts sunvdc to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

As a result, the interface of internal function, vdc_end_request(),
is changed.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:40 +01:00
Kiyoshi Ueda
f01ab252cb blk_end_request: changing ps3disk (take 4)
This patch converts ps3disk to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:38 +01:00
Kiyoshi Ueda
097c94a4e8 blk_end_request: changing nbd (take 4)
This patch converts nbd to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:37 +01:00
Kiyoshi Ueda
1c5093ba03 blk_end_request: changing floppy (take 4)
This patch converts floppy to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

As a result, the interface of internal function, floppy_end_request(),
is changed.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:21 +01:00
Kiyoshi Ueda
0156c2547e blk_end_request: changing DAC960 (take 4)
This patch converts DAC960 to use blk_end_request interfaces.
Related 'UpToDate' arguments are converted to 'Error'.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:04 +01:00
Adrian McMenamin
74ee1a7590 cdrom: Add support for Sega Dreamcast GD-ROM.
This patch adds support for the GD-Rom drive, SEGA's proprietary
implementation of an IDE CD Rom for the SEGA Dreamcast. This driver
implements Sega's Packet Interface (SPI) - at least partially. It will
also read disks in SEGA's propreitary GD format.

Unlike previous drivers (which were never in mainline) this uses DMA and
not PIO to read disks. It is a new driver, not a refactoring of old
drivers.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Greg Kroah-Hartman
c10997f657 Kobject: convert drivers/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Kay Sievers
edfaa7c365 Driver core: convert block from raw kobjects to core devices
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.

  /sys/class/block
  |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
  |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
  |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
  |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
  |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
  |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
  |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
  `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

  /sys/block/
  |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:36 -08:00
Greg Kroah-Hartman
89c4260664 Kobject: change drivers/block/pktcdvd.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:29 -08:00
Tony Jones
6013c12be8 pktcdvd: Convert from class_device to device for block/pktcdvd
struct class_device is going away, this converts the code to use struct
device instead.

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:06 -08:00
Tony Jones
aa27582614 paride: Convert from class_device to device for block/paride
struct class_device is going away, this converts the code to use struct
device instead.

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:06 -08:00
Tony Jones
7ea7ed01ff aoechr: Convert from class_device to device
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sam Hopkins <sah@coraid.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:05 -08:00
Randy Dunlap
7d1fd970e4 cciss: section mismatch
Mark cciss_pci_init() as __devinit, to fix section mismatch warning.

WARNING: vmlinux.o(.text+0x601fc9): Section mismatch: reference to .init.text: (between 'cciss_pci_init' and 'cciss_getgeometry')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:22 -08:00
Jens Axboe
a24eab1ed5 loop: fix bad bio_alloc() nr_iovec request
Don't allocate room for an iovec when it is not needed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11 10:14:40 +01:00
Randy Dunlap
458cf5e9b6 Cleanup umem driver: fix most checkpatch warnings, conform to kernel
coding style.

  linux-2.6.24-rc5-git3> checkpatch.pl-next  patches/block-umem-ckpatch.patch
  total: 0 errors, 5 warnings, 530 lines checked

All of these are line-length warnings.

Only change in generated object file is due to not initializing a
static global variable to 0.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-18 08:29:28 +01:00
Dave Young
d17a18dd92 pktcdvd: add kobject_put when kobject register fails
In kobject_register, the kobject reference is get in kobject_init, and then
kobject_add.  If kobject_add fail, it will only cleanup the reference got
by itself.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:16 -08:00
Neil Brown
794e64d5e9 Fix NULL dereference in umem.c
Fix NULL dereference in umem.c

Signed-off-by: Neil Brown <neilb@suse.de>
Tested-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10 19:43:55 -08:00
Andrew Morton
43cbe2cbdd aoe: properly initialise the request_queue's backing_dev_info
AOE forgot to initialise its queue's backing_dev_info, so kernels crash.
(http://bugzilla.kernel.org/show_bug.cgi?id=9482)

Fix that and consoldate aoeblk_gdalloc()'s error handling.

Thanks be to Jon for reporting and testing.

Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: <stable@kernel.org>
Cc: "Jon Nelson" <jnelson@jamponi.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10 19:43:54 -08:00
Rusty Russell
74b2553f1d virtio: fix module/device unloading
The virtio code never hooked through the ->remove callback.  Although
noone supports device removal at the moment, this code is already
needed for module unloading.

This of course also revealed bugs in virtio_blk, virtio_net and lguest
unloading paths.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-19 11:20:42 +11:00
Christian Borntraeger
5d0360ee96 rd: fix data corruption on memory pressure
We have seen ramdisk based install systems, where some pages of mapped
libraries and programs were suddendly zeroed under memory pressure.  This
should not happen, as the ramdisk avoids freeing its pages by keeping them
dirty all the time.

It turns out that there is a case, where the VM makes a ramdisk page clean,
without telling the ramdisk driver.  On memory pressure shrink_zone runs
and it starts to run shrink_active_list.  There is a check for
buffer_heads_over_limit, and if true, pagevec_strip is called.
pagevec_strip calls try_to_release_page.  If the mapping has no releasepage
callback, try_to_free_buffers is called.  try_to_free_buffers has now a
special logic for some file systems to make a dirty page clean, if all
buffers are clean.  Thats what happened in our test case.

The simplest solution is to provide a noop-releasepage callback for the
ramdisk driver.  This avoids try_to_free_buffers for ramdisk pages.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:42 -08:00
Ondrej Zary
e62aa046e1 paride: pf driver fixes
The pf driver for parallel port floppy drives seems to be broken.  At least
with Imation SuperDisk with EPAT chip, the driver calls pi_connect() and
pi_disconnect after each transferred sector.  At least with EPAT, this
operation is very expensive - causes drive recalibration.  Thus, transferring
even a single byte (dd if=/dev/pf0 of=/dev/null bs=1 count=1) takes 20
seconds, making the driver useless.

The pf_next_buf() function seems to be broken as it returns 1 always (except
when pf_run is non-zero), causing the loop in do_pf_read_drq (and
do_pf_write_drq) to be executed only once.

The following patch fixes this problem.  It also fixes swapped descriptions in
pf_lock() function and removes DBMSG macro, which seems useless.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Trond Myklebust
91cf45f02a [NET]: Add the helper kernel_sock_shutdown()
...and fix a couple of bugs in the NBD, CIFS and OCFS2 socket handlers.

Looking at the sock->op->shutdown() handlers, it looks as if all of them
take a SHUT_RD/SHUT_WR/SHUT_RDWR argument instead of the
RCV_SHUTDOWN/SEND_SHUTDOWN arguments.
Add a helper, and then define the SHUT_* enum to ensure that kernel users
of shutdown() don't get confused.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 18:10:39 -08:00
Tejun Heo
fffe487d59 pktcdvd: fix BUG caused by sysfs module reference semantics change
pkt_setup_dev() expects module reference to be held on invocation.
This used to be true for sysfs callbacks but not anymore.  Test and
grab module reference around pkt_setup_dev() in
class_pktcdvd_store_add().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-08 08:00:24 +01:00
Roel Kluin
b07989f51e paride: fix 'and' typo in drivers/block/paride/pt.c
Fix 'and' typo (PT_WRITE_OK is defined 2)

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05 15:12:32 -08:00
Mike Miller
bd4f36d6da cciss: update copyright notices
This patch updates the copyright information for the cciss driver. It
includes extending the year to 2007 (how timely) and some minor corrections
deemed necessary by HP legal and the Open Source Review Board. Please
consider this patch for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
--------------------------------------------------------------------------------
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-29 11:33:05 +01:00
FUJITA Tomonori
4f33a9d9a4 ub: add sg_init_table for sense and read capacity commands
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-25 09:17:03 +02:00
Jens Axboe
3d1266c704 SG: audit of drivers that use blk_rq_map_sg()
They need to properly init the sg table, or blk_rq_map_sg() will
complain if CONFIG_DEBUG_SG is set.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 13:21:21 +02:00
Jens Axboe
642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
David Miller
d91c5e8839 More SG build fixes
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-24 08:46:01 +02:00
Ralf Baechle
117636092a [PATCH] Fix breakage after SG cleanups
Commits

  58b053e4ce ("Update arch/ to use sg helpers")
  45711f1af6 ("[SG] Update drivers to use sg helpers")
  fa05f1286b ("Update net/ to use sg helpers")

converted many files to use the scatter gather helpers without ensuring
that the necessary headerfile <linux/scatterlist> is included.  This
happened to work for ia64, powerpc, sparc64 and x86 because they
happened to drag in that file via their <asm/dma-mapping.h>.

On most of the others this probably broke.

Instead of increasing the header file spider web I choose to include
<linux/scatterlist.h> directly into the affectes files.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 12:02:39 -07:00
Rusty Russell
0ca49ca946 Remove old lguest bus and drivers.
This gets rid of the lguest bus, drivers and DMA mechanism, to make
way for a generic virtio mechanism.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Rusty Russell
e467cde238 Block driver using virtio.
The block driver uses scatter-gather lists with sg[0] being the
request information (struct virtio_blk_outhdr) with the type, sector
and inbuf id.  The next N sg entries are the bio itself, then the last
sg is the status byte.  Whether the N entries are in or out depends on
whether it's a read or a write.

We accept the normal (SCSI) ioctls: they get handed through to the other
side which can then handle it or reply that it's unsupported.  It's
not clear that this actually works in general, since I don't know
if blk_pc_request() requests have an accurate rq_data_dir().

Although we try to reply -ENOTTY on unsupported commands, ioctl(fd,
CDROMEJECT) returns success to userspace.  This needs a separate
patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 15:49:54 +10:00
Jens Axboe
45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Denis Cheng
d489202ea2 remove unused return within void return function
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 02:18:21 +02:00
Adrian Bunk
d96267ae46 remove duplicate MMAPPER Kconfig option
This option is already in arch/um/Kconfig.char

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Jeff Dike <jdike@addtoit.com>
2007-10-20 01:01:08 +02:00
Jan Engelhardt
96de0e252c Convert files to UTF-8 and some cleanups
* Convert files to UTF-8.

  * Also correct some people's names
    (one example is Eißfeldt, which was found in a source file.
    Given that the author used an ß at all in a source file
    indicates that the real name has in fact a 'ß' and not an 'ss',
    which is commonly used as a substitute for 'ß' when limited to
    7bit.)

  * Correct town names (Goettingen -> Göttingen)

  * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:21:04 +02:00
Robert P. J. Day
3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Patrick Ringl
2e977c85d7 fix typos in drivers/block/Kconfig
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:05:02 +02:00
Pavel Emelyanov
ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Joe Perches
898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Linus Torvalds
b6257a9036 Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [SCSI] Remove full sg table memset()
  [SCSI] ide-scsi: remove usage of sg_last()
  Fix loop terminating conditions in fill_sg().
  [BLOCK] Clear sg entry before filling in blk_rq_map_sg()
  IA64: iommu uses sg_next with an invalid sg element
  cciss: disable DMA refetch on Smart Array P600
  swiotlb: fix map_sg failure handling
  SPARC64: fix iommu sg chaining
  [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17 09:08:13 -07:00
Jesper Juhl
fdc1ca8aba floppy: remove register keyword use from floppy driver
The floppy drive is slow.  These days I see absolutely no good reason why the
floppy driver should try to gain a tiny bit of speed by telling gcc to
optimize access to some variables via the register keyword.  Better to just
leave gcc free to do whatever optimizations it deduces to be sane and not
hamper it by telling it that some variables in the floppy driver are special
and need to be fast (they don't).

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:03 -07:00
Jesper Juhl
aee9041c5f floppy: remove dead/commented out code from floppy driver
A good initial step for a cleanup seems to me to be getting rid of old dead
code.  This stuff is either commented out or inside '#if 0' so it is not
currently in use at all, let's just get rid of it once and for all.  That's a
few lines less to deal with.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:03 -07:00
Jesper Juhl
06f748c475 floppy: do a very minimal style cleanup of the floppy driver
Yes, some of this will likely be replaced in later patches, but I do not see
anyone else coming out of the woodwork with any patches for this driver, so
I'll ignore comments about churn.  I want to get this driver cleaned up, and
if I'm going to do so I want to start with this basic style cleanup to reduce
the reading pain a bit.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:03 -07:00
Robert P. J. Day
fac8b209b1 Remove final traces of long-deprecated "ramdisk" kernel parm
Since the "ramdisk" kernel parameter has been officially deprecated
since at least 2.6.18, might as well finally get rid of it.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:56 -07:00
Adrian Bunk
5a9df732b6 drivers/block/cciss.c: fix check-after-use
The Coverity checker spotted that we have already oops'ed if "disk"
was NULL.

Since "disk" being NULL seems impossible at this point this patch
removes the NULL check.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Steve Cameron
1a614f5051 cciss: fix error reporting for SG_IO
This fixes a problem with the way cciss was filling out the "errors" field
of the request structure upon completion of requests.  Previously, it just
put a 1 or a 0 in there and used the negation of this as the uptodate
parameter to one of the functions in the block layer, being a block device.
 For the SG_IO ioctl, this was not sufficient, and we noticed that, for
example, sg_turs from sg3_utils did not correctly detect problems due to
cciss having set rq->errors incorrectly.

Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Paul Clements
7fdfd4065c NBD: allow hung network I/O to be cancelled
Allow NBD I/O to be cancelled when a network outage occurs.  Previously, I/O
would just hang, and if enough I/O was hung in nbd, the system (at least
user-level) would completely hang until a TCP timeout (default, 15 minutes)
occurred.

The patch introduces a new ioctl NBD_SET_TIMEOUT that allows a transmit
timeout value (in seconds) to be specified.  Any network send that exceeds the
timeout will be cancelled and the nbd connection will be shut down.  I've
tested with various timeout values and 6 seconds seems to be a good choice for
the timeout.  If the NBD_SET_TIMEOUT ioctl is not called, you get the old (I/O
hang) behavior.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Paul Clements
4b86a87256 NBD: set uninitialized devices to size 0
This fixes errors with utilities (such as LVM's vgscan) that try to scan all
devices.  Previously this would generate read errors when uninitialized nbd
devices were scanned:

# vgscan
   Reading all physical volumes.  This may take a while...
   /dev/nbd0: read failed after 0 of 1024 at 0: Input/output error
   /dev/nbd0: read failed after 0 of 1024 at 509804544: Input/output error
   /dev/nbd0: read failed after 0 of 2048 at 0: Input/output error
   /dev/nbd1: read failed after 0 of 1024 at 509804544: Input/output error
   /dev/nbd1: read failed after 0 of 2048 at 0: Input/output error

 From now on, uninitialized nbd devices will have size zero, which
prevents these errors.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Jan Beulich
2e9c47cd4d floppy: tolerate DMA channel unavailability
The floppy driver is already written to be able to operate in virtual DMA
mode.  Thus it can easily be adjusted to tolerate failure from
fd_request_dma() as long as virtual DMA mode is not disallowed.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Ed L. Cashin
abdbf94d7c aoe: remove unecessary wrapper function
We can just use skb_mac_header now, and we don't need a wrapper function to
perform the cast.  Instead of requiring the reader to check aoe.h to look
up what an aoe_hdr function does, I'd rather do without it.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:52 -07:00
Diego Woitasen
759d7c6c47 Remove unneeded lock_kernel() in driver/block/loop.c
Signed-off-by: Diego Woitasen <diego@woitasen.com.ar>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:48 -07:00
Denis Cheng
0cbc591bf8 nbd: change a parameter's type to remove a memcpy call
This memcpy looks so strange, in fact it's merely a pointer dereference, so I
change the parameter's type to refer it more directly, this could make the
memcpy not needed anymore.

In the function nbd_read_stat where nbd_find_request is only once called, the
parameter served should be transformed accordingly.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Denis Cheng
d2c9740b49 nbd: use list_for_each_entry_safe to make it more consolidated and readable
Thus the traverse of the loop may delete nodes, use the safe version.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Peter Zijlstra
e0bf68ddec mm: bdi init hooks
provide BDI constructor/destructor hooks

[akpm@linux-foundation.org: compile fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Mike Miller (OS Dev)
8bf50f71cb cciss: disable DMA refetch on Smart Array P600
This patch disables DMA refetch in the PCI bridge. We have disabled DMA
prefetch for quite some time. Testing with XEN revealed another ASIC bug. If
dom0 resides on a P600 the board can can an MCA bi accessing invalid memory
addresses. Apparently, we need to disable both prefetch and refetch.
My understanding is a refetch operation should not occur but it is a valid
thing to do if prefetched data is no longer available for whatever reason.
Please consider this patch for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>

--------------------------------------------------------------------------------
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17 10:10:04 +02:00
Linus Torvalds
92d15c2ccb Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits)
  Fix memory leak in dm-crypt
  SPARC64: sg chaining support
  SPARC: sg chaining support
  PPC: sg chaining support
  PS3: sg chaining support
  IA64: sg chaining support
  x86-64: enable sg chaining
  x86-64: update pci-gart iommu to sg helpers
  x86-64: update nommu to sg helpers
  x86-64: update calgary iommu to sg helpers
  swiotlb: sg chaining support
  i386: enable sg chaining
  i386 dma_map_sg: convert to using sg helpers
  mmc: need to zero sglist on init
  Panic in blk_rq_map_sg() from CCISS driver
  remove sglist_len
  remove blk_queue_max_phys_segments in libata
  revert sg segment size ifdefs
  Fixup u14-34f ENABLE_SG_CHAINING
  qla1280: enable use_sg_chaining option
  ...
2007-10-16 10:09:16 -07:00
Dmitry Monakhov
8268f5a741 deny partial write for loop dev fd
Partial write can be easily supported by LO_CRYPT_NONE mode, but it is not
easy in LO_CRYPT_CRYPTOAPI case, because of its block nature.  I don't know
who still used cryptoapi, but theoretically it is possible.  So let's leave
things as they are.  Loop device doesn't support partial write before
Nick's "write_begin/write_end" patch set, and let's it behave the same way
after.

Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:55 -07:00
Nick Piggin
afddba49d1 fs: introduce write_begin, write_end, and perform_write aops
These are intended to replace prepare_write and commit_write with more
flexible alternatives that are also able to avoid the buffered write
deadlock problems efficiently (which prepare_write is unable to do).

[mark.fasheh@oracle.com: API design contributions, code review and fixes]
[akpm@linux-foundation.org: various fixes]
[dmonakhov@sw.ru: new aop block_write_begin fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:55 -07:00
Jens Axboe
3eed13fd93 Merge branch 'sglist-arch' into for-linus 2007-10-16 12:29:34 +02:00
Jens Axboe
a39d113936 Merge branch 'barrier' into for-linus 2007-10-16 12:29:29 +02:00
Lee Schermerhorn
a683d652d3 Panic in blk_rq_map_sg() from CCISS driver
New scatter/gather list chaining [sg_next()] treats 'page' member of
struct scatterlist with low bit set [0x01] as a chain pointer to
another struct scatterlist [array].  The CCISS driver request function
passes an uninitialized, temporary, on-stack scatterlist array to
blk_rq_map_sq().  sg_next() interprets random data on the stack as a
chain pointer and eventually tries to de-reference an invalid pointer,
resulting in:

[<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170
PGD 6090c3067 PUD 0
Oops: 0000 [1] SMP
last sysfs file: /block/cciss!c0d0/cciss!c0d0p1/dev
CPU 6
Modules linked in: ehci_hcd ohci_hcd uhci_hcd
Pid: 1, comm: init Not tainted 2.6.23-rc6-mm1 #3
RIP: 0010:[<ffffffff8031dd70>] [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170
RSP: 0018:ffff81060901f768 EFLAGS: 00010206
RAX: 000000040b161000 RBX: ffff81060901f7d8 RCX: 000000040b162c00
RDX: 0000000000000000 RSI: ffff81060b13a260 RDI: ffff81060b139600
RBP: 0000000000001400 R08: 00000000fffffffe R09: 0000000000000400
R10: 0000000000000000 R11: 000000040b163000 R12: ffff810102fe0000
R13: 0000000000000001 R14: 0000000000000001 R15: 00001e0000000000
FS: 00000000026108f0(0063) GS:ffff810409000b80(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000010000001e CR3: 00000006090c6000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process init (pid: 1, threadinfo ffff81060901e000, task ffff810409020800)
last branch before last exception/interrupt
from [<ffffffff8031de0a>] blk_rq_map_sg+0x10a/0x170
to [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170
Stack: 000000018068ea00 ffff810102fe0000 0000000000000000 ffff810011400000
0000000000000002 0000000000000000 ffff81040b172000 ffffffff803acd3d
0000000000003ec1 ffff8106090d5000 ffff8106090d5000 ffff810102fe0000
Call Trace:
[<ffffffff803acd3d>] do_cciss_request+0x15d/0x4c0
[<ffffffff80298968>] new_slab+0x1c8/0x270
[<ffffffff80298ffd>] __slab_alloc+0x22d/0x470
[<ffffffff8027327b>] mempool_alloc+0x4b/0x130
[<ffffffff8032b21e>] cfq_set_request+0xee/0x380
[<ffffffff8027327b>] mempool_alloc+0x4b/0x130
[<ffffffff8031ff98>] get_request+0x168/0x360
[<ffffffff80331b0d>] rb_insert_color+0x8d/0x110
[<ffffffff8031cfd8>] elv_rb_add+0x58/0x60
[<ffffffff8032a329>] cfq_add_rq_rb+0x69/0xa0
[<ffffffff8031c1ab>] elv_merged_request+0x5b/0x60
[<ffffffff803224fd>] __make_request+0x23d/0x650
[<ffffffff80298ffd>] __slab_alloc+0x22d/0x470
[<ffffffff80270000>] generic_write_checks+0x140/0x190
[<ffffffff8031f012>] generic_make_request+0x1c2/0x3a0
<etc>
Kernel panic - not syncing: Attempted to kill init!

This patch initializes the tmp_sg array to zeroes.  Perhaps not the ultimate
fix, but an effective work-around.  I can now boot 23-rc6-mm1 on an HP
Proliant x86_64 with CCISS boot disk.

Signed-off-by:  Lee Schermerhorn <lee.schermerhorn@hp.com>

 drivers/block/cciss.c |    1 +
 1 file changed, 1 insertion(+)
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:24:44 +02:00
Laurent Riffard
7e3da6c4b9 pktcdvd: don't rely on bio_init() preserving bio->bi_destructor
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:05:09 +02:00
Jens Axboe
761a15e7ac pktcdvd: don't rely on bio_init() preserving bio->bi_io_vec
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:05:08 +02:00
Jens Axboe
fd5d806266 block: convert blkdev_issue_flush() to use empty barriers
Then we can get rid of ->issue_flush_fn() and all the driver private
implementations of that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:05:02 +02:00
Jeff Garzik
87ad900164 drivers/block/cpqarray,cciss: kill unused var
The recent bio work and subsequent fixups created unused variables.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 09:59:55 +02:00
Al Viro
b4482a4b2e more trivial signedness fixes in drivers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:52 -07:00
Robert P. J. Day
cebe0fe70f [S390] Remove obsolete recommendation for 8M ramdisk size.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12 16:13:09 +02:00
Linus Torvalds
e86908614f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11 21:55:47 -07:00
Linus Torvalds
038a5008b2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)
  [SKY2]: status polling loop (post merge)
  [NET]: Fix NAPI completion handling in some drivers.
  [TCP]: Limit processing lost_retrans loop to work-to-do cases
  [TCP]: Fix lost_retrans loop vs fastpath problems
  [TCP]: No need to re-count fackets_out/sacked_out at RTO
  [TCP]: Extract tcp_match_queue_to_sack from sacktag code
  [TCP]: Kill almost unused variable pcount from sacktag
  [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L
  [TCP]: Add bytes_acked (ABC) clearing to FRTO too
  [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2
  [NETFILTER]: x_tables: add missing ip6t_modulename aliases
  [NETFILTER]: nf_conntrack_tcp: fix connection reopening
  [QETH]: fix qeth_main.c
  [NETLINK]: fib_frontend build fixes
  [IPv6]: Export userland ND options through netlink (RDNSS support)
  [9P]: build fix with !CONFIG_SYSCTL
  [NET]: Fix dev_put() and dev_hold() comments
  [NET]: make netlink user -> kernel interface synchronious
  [NET]: unify netlink kernel socket recognition
  [NET]: cleanup 3rd argument in netlink_sendskb
  ...

Fix up conflicts manually in Documentation/feature-removal-schedule.txt
and my new least favourite crap, the "mod_devicetable" support in the
files include/linux/mod_devicetable.h and scripts/mod/file2alias.c.

(The latter files seem to be explicitly _designed_ to get conflicts when
different subsystems work with them - that have an absolutely horrid
lack of subsystem separation!)

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11 19:40:14 -07:00