Commit Graph

263801 Commits

Author SHA1 Message Date
Jiaying Zhang
dccaf33fa3 ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
There is a race between ext4 buffer write and direct_IO read with
dioread_nolock mount option enabled. The problem is that we clear
PageWriteback flag during end_io time but will do
uninitialized-to-initialized extent conversion later with dioread_nolock.
If an O_direct read request comes in during this period, ext4 will return
zero instead of the recently written data.

This patch checks whether there are any pending uninitialized-to-initialized
extent conversion requests before doing O_direct read to close the race.
Note that this is just a bandaid fix. The fundamental issue is that we
clear PageWriteback flag before we really complete an IO, which is
problem-prone. To fix the fundamental issue, we may need to implement an
extent tree cache that we can use to look up pending to-be-converted extents.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2011-08-19 19:13:32 -04:00
Paul Walmsley
9c5f560173 OMAP4: clock: re-enable previous clockdomain enable/disable sequence
After commit 665d001338 ("OMAP2+: hwmod:
Follow the recommended PRCM module enable sequence"), device drivers
for OMAP IP blocks that do not use runtime PM can cause oopses or
kernel instability[1][2].

This is because those non-runtime PM drivers do not use the hwmod
code, which implements the correct IP block enable and disable
sequence.

Several options for dealing with this problem have been proposed:

1. Add a new field to the OMAP struct clk to mark clocks that are
   currently used by non-runtime PM drivers.  Modify the clock code to
   use the old clockdomain sequence for these marked clocks.  As
   drivers are converted to use runtime PM, remove the annotation from
   the clocks.

2. Similar to #1, but associate the flag with the struct omap_clk
   instead.

3. Add IDLEST wait support to the OMAP4 clock code, similar to the way
   it is implemented for OMAP2/3, and enable it in each struct clk
   currently used by non-runtime PM drivers.  As drivers are converted
   to use runtime PM, remove the annotation from the clocks.

4. Do nothing; leave the problem to those responsible for the
   unconverted drivers.

5. Re-enable clock-based clockdomain control in the OMAP4 clock code.
   This would revert back to the behavior of Linux 3.0, simply with a
   slightly longer module enable/disable latency.

Unfortunately, no approach seemed particularly good.  Options 1
through 3 seemed unwise due to the following reasons:

A. The OMAP struct clks are intended primarily to describe hardware
   clock nodes, and the intention is that no driver-specific data
   should be stored there (applies to #1)

B. The resulting patch would have been quite large for the -rc series
   (applies to #1, #2, #3)

C. The patch would have been a new, yet temporary hack; and similar fixes
   have drawn negative comments in the recent past (see for example [3])

Option 4 is undesirable because commit
665d001338 ("OMAP2+: hwmod: Follow the
recommended PRCM module enable sequence") has resulted in a less
stable kernel; and kernel stability is more important than OMAP4 power
management.

Option 5 is the approach taken in this patch.  This seemed to be the
least intrusive approach for 3.1-rc.

The approach in this patch was originally proposed by Ohad Ben-Cohen
<ohad@wizery.com>.  I'm simply writing the commit message and passing
it along.

...

Thanks to Luciano Coelho <coelho@ti.com> for reporting the problem.
Thanks to Ohad Ben-Cohen <ohad@wizery.com> for tracking the problem
down, generating a temporary workaround, and proposing a patch to deal
with the problem.  Thanks to Rajendra Nayak <rnayak@ti.com> for
proposing another patch to deal with the problem.  Thanks to Felipe
Balbi <balbi@ti.com> for comments.

1. Coelho, Luciano <coelho@ti.com>.  _Re: Oops on ehci_hcd when
   booting 3.0.0-rc2 on panda_.  Tue, 09 Aug 2011 14:26:08 +0300.
   Posted to the <linux-omap@vger.kernel.org> mailing list.  Available
   from (among others)
   http://www.spinics.net/linux/lists/linux-omap/msg55213.html

2. Munegowda, Keshava <keshava_mgowda@ti.com>. _Re: Oops on ehci_hcd
   when booting 3.0.0-rc2 on panda_.  Thu, 11 Aug 2011 13:51:05 +0530.
   Posted to the <linux-omap@vger.kernel.org> mailing list.  Available
   from (among others)
   http://www.spinics.net/linux/lists/linux-omap/msg55371.html

3. King, Russell <linux@arm.linux.org.uk>.  _Re: [PATCH 5/8] OMAP4:
   PM: TEMP: Prevent l3init from idling/force sleep_.  Thu, 23 Jun
   2011 16:22:49 +0100.  Posted to the <linux-omap@vger.kernel.org>
   mailing list.  Available from (among others)
   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg51392.html

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Luciano Coelho <coelho@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-08-19 16:59:56 -06:00
Santosh Shilimkar
b1cbdb00da OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup
While using clockdomain force wakeup method, not waiting for powerdomain
to be effectively ON may end up locking the clockdomain FSM until a
next wakeup event occurs.

One such issue was seen on OMAP4430, where L4_PER was periodically
getting stuck in in-transition state when transitioning from from OSWR to ON.

This issue was reported and investigated by Patrick Titiano <p-titiano@ti.com>

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reported-by: Patrick Titiano <p-titiano@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: updated to apply; added transition wait on clkdm_deny_idle();
 remove two superfluous pwrdm_wait_transition() calls]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-08-19 16:59:39 -06:00
Rajendra Nayak
c956b753e7 OMAP: powerdomains: Make all powerdomain target states as ON at init
Program all powerdomain target state as ON; this is to prevent domains
from hitting low power states (if bootloader has target states set to
something other than ON) and potentially even losing context while PM
is not fully initialized, which can cause the system to crash.  The PM
late init code can then program the desired target state for all the
power domains.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[paul@pwsan.com: dropped comment typo hunk; fixed comment indent and moved
 to kerneldoc; moved code to pwrdm_init(); changed pwrdm_init() argument name
 to prevent clash; cleaned up patch description]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-08-19 16:59:39 -06:00
Jesse Barnes
b095cd0a0c drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that
MI_FLUSH would flush the TLBs in addition to the rest of the caches
indicated in the MI_FLUSH command.  However starting with Ivybridge, the
register defaults to 0x2800 out of reset, meaning that to invalidate the
TLB we need to use PIPE_CONTROL.  Since we're not doing that yet, go
back to the old default so things work.

v2: don't forget to actually *clear* the new bit

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19 11:57:12 -07:00
Linus Torvalds
5ccc38740a Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits)
  Revert "cfq: Remove special treatment for metadata rqs."
  block: fix flush machinery for stacking drivers with differring flush flags
  block: improve rq_affinity placement
  blktrace: add FLUSH/FUA support
  Move some REQ flags to the common bio/request area
  allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
  xen/blkback: Make description more obvious.
  cfq-iosched: Add documentation about idling
  block: Make rq_affinity = 1 work as expected
  block: swim3: fix unterminated of_device_id table
  block/genhd.c: remove useless cast in diskstats_show()
  drivers/cdrom/cdrom.c: relax check on dvd manufacturer value
  drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse
  bsg-lib: add module.h include
  cfq-iosched: Reduce linked group count upon group destruction
  blk-throttle: correctly determine sync bio
  loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other
  loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices
  loop: add management interface for on-demand device allocation
  loop: replace linked list of allocated devices with an idr index
  ...
2011-08-19 10:47:07 -07:00
Linus Torvalds
0c3bef6128 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: OF: Don't crash when bridge parent is NULL.
  PCI: export pcie_bus_configure_settings symbol
  PCI: code and comments cleanup
  PCI: make cardbus-bridge resources optional
  PCI: make SRIOV resources optional
  PCI : ability to relocate assigned pci-resources
  PCI: honor child buses add_size in hot plug configuration
  PCI: Set PCI-E Max Payload Size on fabric
2011-08-19 10:02:37 -07:00
Vasily Khoruzhick
815efa1eab s3c-adc-battery: Fix compilation error due to missing header (module.h)
Add linux/module.h to fix this compilation error:

drivers/power/s3c_adc_battery.c:435:15: error: expected declaration specifiers or ‘...’ before string constant
drivers/power/s3c_adc_battery.c:435:1: warning: data definition has no type or storage class
drivers/power/s3c_adc_battery.c:435:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’
drivers/power/s3c_adc_battery.c:435:15: warning: function declaration isn’t a prototype
drivers/power/s3c_adc_battery.c:436:20: error: expected declaration specifiers or ‘...’ before string constant
drivers/power/s3c_adc_battery.c:436:1: warning: data definition has no type or storage class
drivers/power/s3c_adc_battery.c:436:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_DESCRIPTION’
drivers/power/s3c_adc_battery.c:436:20: warning: function declaration isn’t a prototype
drivers/power/s3c_adc_battery.c:437:16: error: expected declaration specifiers or ‘...’ before string constant
drivers/power/s3c_adc_battery.c:437:1: warning: data definition has no type or storage class
drivers/power/s3c_adc_battery.c:437:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_LICENSE’
drivers/power/s3c_adc_battery.c:437:16: warning: function declaration isn’t a prototype
make[2]: *** [drivers/power/s3c_adc_battery.o] Error 1

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19 21:01:46 +04:00
Axel Lin
71aa79a8c2 max8997_charger: Needs module.h
power/max8997_charger.c uses interfaces from linux/module.h,
so it should include that file.  This fixes build errors.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19 21:01:41 +04:00
Randy Dunlap
d555ab6bb3 max8998_charger: Needs module.h
power/max8998_charger.c uses interfaces from linux/module.h,
so it should include that file.  This fixes build errors.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-08-19 20:56:58 +04:00
Artem Bityutskiy
9efabc8476 UBI: do not link debug messages when debugging is disabled
Michal Marek spotted the same issue in UBIFS and this patch fixes UBI,
see "UBIFS: not build debug messages with CONFIG_UBIFS_FS_DEBUG disabled"

When UBI debugging is disabled, we have debugging messages defined as:

if (0)
	pr_debug()

But pr_debug macro defines data structures with debugging data and makes
the linux binary larger, even though we have "if (0)".

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-19 19:02:27 +03:00
Michal Marek
016f1c5440 UBIFS: not build debug messages with CONFIG_UBIFS_FS_DEBUG disabled
With
  $ grep -e UBIFS_FS_DEBUG -e DYNAMIC_DEBUG .config
  # CONFIG_UBIFS_FS_DEBUG is not set
  CONFIG_DYNAMIC_DEBUG=y

Debug messages are kept in the object files due to the
dynamic_pr_debug() macro, even if they are never going to be printed:
  $ make fs/ubifs/super.o
  $ strings fs/ubifs/super.o | grep 'compiled on'
  compiled on:         Aug 11 2011 at 12:21:38

Use plain printk to fix this.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-19 18:58:58 +03:00
David Daney
69566dd8be PCI: OF: Don't crash when bridge parent is NULL.
In pcibios_get_phb_of_node(), we will crash while booting if
bus->bridge->parent is NULL.

Check for this case and avoid dereferencing the NULL pointer.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19 08:51:37 -07:00
Dominik Brodowski
498ca793d9 cpupower: use man(1) when calling "cpupower help subcommand"
Instead of printing something non-formatted to stdout, call
man(1) to show the man page for the proper subcommand.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-19 17:13:56 +02:00
Dominik Brodowski
47c336307a cpupower: make NLS truly optional
Loosely based on a patch for cpufrequtils, submittted by
Sergey Dryabzhinsky <sergey.dryabzhinsky@gmail.com> and

signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-19 17:00:02 +02:00
Dave Jones
63b37de128 cpupower: fix Makefile typo
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-08-19 16:49:49 +02:00
Wu Fengguang
bb0822954a squeeze max-pause area and drop pass-good area
Revert the pass-good area introduced in ffd1f609ab ("writeback:
introduce max-pause and pass-good dirty limits") and make the max-pause
area smaller and safe.

This fixes ~30% performance regression in the ext3 data=writeback
fio_mmap_randwrite_64k/fio_mmap_randrw_64k test cases, where there are
12 JBOD disks, on each disk runs 8 concurrent tasks doing reads+writes.

Using deadline scheduler also has a regression, but not that big as CFQ,
so this suggests we have some write starvation.

The test logs show that

- the disks are sometimes under utilized

- global dirty pages sometimes rush high to the pass-good area for
  several hundred seconds, while in the mean time some bdi dirty pages
  drop to very low value (bdi_dirty << bdi_thresh).  Then suddenly the
  global dirty pages dropped under global dirty threshold and bdi_dirty
  rush very high (for example, 2 times higher than bdi_thresh). During
  which time balance_dirty_pages() is not called at all.

So the problems are

1) The random writes progress so slow that they break the assumption of
   the max-pause logic that "8 pages per 200ms is typically more than
   enough to curb heavy dirtiers".

2) The max-pause logic ignored task_bdi_thresh and thus opens the possibility
   for some bdi's to over dirty pages, leading to (bdi_dirty >> bdi_thresh)
   and then (bdi_thresh >> bdi_dirty) for others.

3) The higher max-pause/pass-good thresholds somehow leads to the bad
   swing of dirty pages.

The fix is to allow the task to slightly dirty over task_bdi_thresh, but
no way to exceed bdi_dirty and/or global dirty_thresh.

Tests show that it fixed the JBOD regression completely (both behavior
and performance), while still being able to cut down large pause times
in balance_dirty_pages() for single-disk cases.

Reported-by: Li Shaohua <shaohua.li@intel.com>
Tested-by: Li Shaohua <shaohua.li@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-08-19 22:42:07 +08:00
Naveen Krishna Chatradhi
5d747c6f2c ARM: S5P: fix bug in spdif_clk_get_rate
Should be passing the parent clk object when
calling for parent rate.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 21:21:08 +09:00
Kyungmin Park
d2edddf2b2 ARM: EXYNOS4: Add restart hook for proper reboot
This is required to use SWRESET.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 21:21:08 +09:00
Yulgon Kim
2b431ff74a ARM: EXYNOS4: Increase reset delay for USB HOST PHY
This patch increases reset delay from 50 usec to 80 usec for
USB HOST PHY. In order to reset USB HOST PHY controller properly,
a little extra time is required during its reset cycle.

Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:39 +09:00
Marek Szyprowski
3f6065dd9d ARM: S5P: add required chained_irq_enter/exit to gpio-int code
This patch adds chained IRQ enter/exit functions to gpio interrupt
handler in order to function correctly on primary controllers with
different methods of flow control.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:38 +09:00
Marek Szyprowski
70b0e82bc7 ARM: EXYNOS4: add required chained_irq_enter/exit to eint code
This patch adds chained IRQ enter/exit functions to external interrupt
handler in order to function correctly on primary controllers with
different methods of flow control.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:37 +09:00
Marek Szyprowski
995b528ad2 ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handler
This patch adds chained IRQ enter/exit functions to timer
interrupt handler in order to function correctly on primary
controllers with different methods of flow control.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:37 +09:00
Abhilash Kesavan
f98d429d7a ARM: S3C64XX: Fix build break in PM debug
When S3C_PM_DEBUG_LED_SMDK is enabled for suspend/resume debugging, the following
compilation error occurs:

arch/arm/mach-s3c64xx/pm.c: In function 's3c_pm_debug_smdkled':
arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'gpio_set_value'
arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'S3C64XX_GPN'
arch/arm/mach-s3c64xx/pm.c: In function 's3c64xx_pm_init':
arch/arm/mach-s3c64xx/pm.c:184: error: implicit declaration of function 'gpio_request'
arch/arm/mach-s3c64xx/pm.c:188: error: implicit declaration of function 'gpio_direction_output'

Fix the error by including linux/gpio.h

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:36 +09:00
Abhilash Kesavan
7e1291dea2 ARM: S5PV210: Fix build warning
Fixed the following warning for S5PV210.

arch/arm/mach-s5pv210/pm.c: In function 's5pv210_pm_add':
arch/arm/mach-s5pv210/pm.c:139: warning: assignment from
incompatible pointer type

Also, staticized the function.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:35 +09:00
Sylwester Nawrocki
5a1993f0c6 ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device
This is a regression fix after migration to the external GIC.
The breakage has been introduced in commit 69644a8e23
("ARM: EXYNOS4: modify interrupt mappings for external GIC")

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: added commit id]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:34 +09:00
Huang Weiyi
6b875cb741 ARM: EXYNOS4: remove duplicated inclusion
Remove duplicated #include('s) in
  arch/arm/mach-exynos4/cpu.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:25 +09:00
Jonghwan Choi
af8a9f63b4 ARM: EXYNOS4: Fix wrong devname to support clkdev
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:21 +09:00
Kyungmin Park
c1a238aadf ARM: EXYNOS4: Use the correct regulator names on universal_c210
Use the correct regulator names for cpufreq

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:20 +09:00
Kukjin Kim
b8a297d3f8 ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set()
WARNING: vmlinux.o(.text+0xf47c): Section mismatch in reference from the function samsung_bl_set() to the (unknown reference) .init.data:(unknown)
The function samsung_bl_set() references
the (unknown reference) __initdata (unknown).
This is often because samsung_bl_set lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:57:20 +09:00
Kukjin Kim
ac0d1516a2 ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit()
According to commit 659fb32d1b
("replace irq_gc_ack() with {set,clr}_bit variants"), this
should be fixed.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-08-19 20:56:17 +09:00
Daniel Baluta
98e77438ae ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
IPV6_2292PKTOPTIONS is broken for 32-bit applications running
in COMPAT mode on 64-bit kernels.

The same problem was fixed for IPv4 with the patch:
ipv4: Fix ip_getsockopt for IP_PKTOPTIONS,
commit dd23198e58

Signed-off-by: Sorin Dumitru <sdumitru@ixiacom.com>
Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-19 03:19:07 -07:00
Axel Lin
6c58addca8 ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER
Since commit 8560a6cfc9
"arm: Footbridge: Use common i8253 clockevent",
ARCH_NETWINDER needs to select CLKEVT_I8253.

This patch fixes below build error with "make netwinder_defconfig".

  LD      .tmp_vmlinux1
arch/arm/mach-footbridge/built-in.o: In function `isa_timer_init':
isa-rtc.c:(.init.text+0x12c8): undefined reference to `clockevent_i8253_init'
isa-rtc.c:(.init.text+0x12d0): undefined reference to `i8253_clockevent'
arch/arm/mach-footbridge/built-in.o:(.data+0x198): undefined reference to `i8253_clockevent'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-19 08:51:27 +01:00
Jens Axboe
b53d1ed734 Revert "cfq: Remove special treatment for metadata rqs."
We have a kernel build regression since 3.1-rc1, which is about 10%
regression. The kernel source is in an ext3 filesystem.
Alex Shi bisect it to commit:
commit a07405b780
Author: Justin TerAvest <teravest@google.com>
Date:   Sun Jul 10 22:09:19 2011 +0200

    cfq: Remove special treatment for metadata rqs.

Apparently this is caused by lack metadata preemption, where ext3/ext4
do use READ_META. I didn't see a way to fix the issue, so suggest
reverting the patch.

This reverts commit a07405b780.

Reported-by: Alex Shi<alex.shi@intel.com>
Reported-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19 08:34:48 +02:00
Takashi Iwai
38b65190c6 ALSA: usb-audio - Fix missing mixer dB information
The recent fix for testing dB range at the mixer creation time seems
to cause regressions in some devices.  In such devices, reading the dB
info at probing time gives an error, thus both dBmin and dBmax are still
zero, and TLV flag isn't set although the later read of dB info succeeds.

This patch adds a workaround for such a case by assuming that the later
read will succeed.  In future, a similar test should be performed in a
case where a wrong dB range is seen even in the later read.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
2011-08-19 07:55:10 +02:00
Linus Torvalds
01b883358b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fix array bounds error setting up PCIC NMI trap
2011-08-18 22:49:34 -07:00
Linus Torvalds
2c4ac99f98 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  drivers/ata/sata_dwc_460ex.c: add missing kfree
  ata: Add iMX pata support
  pata_via: disable ATAPI DMA on AVERATEC 3200
  [libata] sata_sil: fix used-uninit warning
2011-08-18 22:48:30 -07:00
Linus Torvalds
35a21b4299 Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: Return NFS4ERR_BADSESSION to callbacks during session resets
  NFSv4.1: Fix the callback 'highest_used_slotid' behaviour
  pnfs-obj: Fix the comp_index != 0 case
  pnfs-obj: Bug when we are running out of bio
  nfs: add missing prefetch.h include
2011-08-18 22:47:13 -07:00
Ian Campbell
4a0342ca8e sparc: fix array bounds error setting up PCIC NMI trap
CC      arch/sparc/kernel/pcic.o
arch/sparc/kernel/pcic.c: In function 'pcic_probe':
arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds]
arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds]
arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds]
arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds]
arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds]
arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds]
cc1: all warnings being treated as errors

I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via
the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear
to be 4 instructions long and I presume from the usage that instructions are
int sized.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 21:47:40 -07:00
Willem de Bruijn
2d5b2c5ca0 net: netdev-features.txt update to Documentation/networking/00-INDEX
Update netdev-features.txt entry in 00-INDEX to incorporate
feedback by Michał Mirosław.

v2: restored tabs that were inadvertently changed to spaces in v1.
sorry for the error.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 21:30:37 -07:00
Jiri Pirko
c5114cd59d vlan: reset headers on accel emulation path
It's after all necessary to do reset headers here. The reason is we
cannot depend that it gets reseted in __netif_receive_skb once skb is
reinjected. For incoming vlanids without vlan_dev, vlan_do_receive()
returns false with skb != NULL and __netif_reveive_skb continues, skb is
not reinjected.

This might be good material for 3.0-stable as well

Reported-by: Mike Auty <mike.auty@gmail.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 21:29:27 -07:00
Julia Lawall
a081da630d drivers/ata/sata_dwc_460ex.c: add missing kfree
Currently, error handling code in this function calls the function
sata_dwc_port_stop, but this function has essentially no effect if hsdevp
has not been stored in ap, which is the case throughout this function.  The
only effect is to print a debugging message including ap->print_id.

The code is rewritten to not call sata_dwc_port_stop, but instead to jump
to a local label that prints the original error message and the print_id
information.  In the case where hsdevp has been already allocated (but not
yet stored in ap), this value is freed as well.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@exists@
local idexpression x;
statement S,S1;
expression E;
identifier fl;
expression *ptr != NULL;
@@

x = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...kfree(x)...+> }
     when any
     when != true x == NULL
x->fl
...>
(
if (x == NULL) S1
|
if (...) { ... when != x
               when forall
(
 return \(0\|<+...x...+>\|ptr\);
|
* return ...;
)
}
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18 23:58:11 -04:00
Arnaud Patard (Rtp)
e39c75cf3e ata: Add iMX pata support
Add basic support for pata on iMX. It has been tested only on imx51.
SDMA support will probably be added later so this version supports only
PIO.

v2:
  - enable only when needed IORDY
  - use dev_get_drvdata
v3:
  - add missing clk_put() calls
  - use platform_get_irq()
  - fix resume code to avoid disabling IORDY on resume
v4:
  - Remove EXPERIMENTAL and switch to depends on ARCH_MXC
  - Use devm_kzalloc()
  - make clock a must-have
  - Use only 1 ioremap

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:57:58 -04:00
Tejun Heo
6d0e194d2e pata_via: disable ATAPI DMA on AVERATEC 3200
On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA,
which often leads to random kernel oops.  The cause of the problem is
not well understood yet and only small subset of machines using the
controller seem affected.  Blacklist ATAPI DMA on the machine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426
Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18 23:56:39 -04:00
Jeff Garzik
ebd1699ec5 [libata] sata_sil: fix used-uninit warning
Init 'serror' to silence the following warning:

drivers/ata/sata_sil.c: In function ‘sil_interrupt’:
drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in
this function [-Wuninitialized]

This is not a 'can never happen' but is nonetheless extremely unlikely.
The easiest and cleanest warning fix is simply to init the var,
rather than worry about marking the var uninit-ok.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18 23:52:36 -04:00
Linus Torvalds
5c80c71b9a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: set i_size properly when fallocating and we already
  btrfs: unlock on error in btrfs_file_llseek()
  btrfs: btrfs_permission's RO check shouldn't apply to device nodes
  Btrfs: truncate pages from clone ioctl target range
  Btrfs: fix uninitialized sync_pending
  Btrfs: fix wrong free space information
  btrfs: memory leak in btrfs_add_inode_defrag()
  Btrfs: use plain page_address() in header fields setget functions
  Btrfs: forced readonly when btrfs_drop_snapshot() fails
  Btrfs: check if there is enough space for balancing smarter
  Btrfs: fix a bug of balance on full multi-disk partitions
  Btrfs: fix an oops of log replay
  Btrfs: detect wether a device supports discard
  Btrfs: force unplugs when switching from high to regular priority bios
2011-08-18 14:20:00 -07:00
Linus Torvalds
01fa4ba52c Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  update cifs version to 1.75
  [CIFS] possible memory corruption on mount
  cifs: demote cERROR in build_path_from_dentry to cFYI
2011-08-18 14:19:36 -07:00
Linus Torvalds
fbad8991ef Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/iser: Support iSCSI PDU padding
  IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)
  IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
2011-08-18 14:18:55 -07:00
Linus Torvalds
f6a975c50a Merge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: fat16 support maximum 4GB file/vol size as WinXP or 7.
  fat: fix utf8 iocharset warning message
  fat: fix build warning
2011-08-18 14:16:13 -07:00
Randy Dunlap
d522a0d179 irqdesc: fix new kernel-doc warning
Fix kernel-doc warning in irqdesc.c:

  Warning(kernel/irq/irqdesc.c:353): No description found for parameter 'owner'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18 14:12:48 -07:00