Commit Graph

865 Commits

Author SHA1 Message Date
Ming Lei
51db1c37ee blk-mq: Rename BLK_MQ_F_TAG_SHARED as BLK_MQ_F_TAG_QUEUE_SHARED
BLK_MQ_F_TAG_SHARED actually means that tags is shared among request
queues, all of which should belong to LUNs attached to same HBA.

So rename it to make the point explicitly.

[jpg: rebase a few times, add rnbd-clt.c change]

Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-03 15:20:46 -06:00
Ming Lei
db03f88fae blk-mq: insert request not through ->queue_rq into sw/scheduler queue
c616cbee97 ("blk-mq: punt failed direct issue to dispatch list") supposed
to add request which has been through ->queue_rq() to the hw queue dispatch
list, however it adds request running out of budget or driver tag to hw queue
too. This way basically bypasses request merge, and causes too many request
dispatched to LLD, and system% is unnecessary increased.

Fixes this issue by adding request not through ->queue_rq into sw/scheduler
queue, and this way is safe because no ->queue_rq is called on this request
yet.

High %system can be observed on Azure storvsc device, and even soft lock
is observed. This patch reduces %system during heavy sequential IO,
meantime decreases soft lockup risk.

Fixes: c616cbee97 ("blk-mq: punt failed direct issue to dispatch list")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-21 17:09:22 -06:00
Ming Lei
d7d8535f37 blk-mq: order adding requests to hctx->dispatch and checking SCHED_RESTART
SCHED_RESTART code path is relied to re-run queue for dispatch requests
in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding
requests to hctx->dispatch.

memory barriers have to be used for ordering the following two pair of OPs:

1) adding requests to hctx->dispatch and checking SCHED_RESTART in
blk_mq_dispatch_rq_list()

2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch
in blk_mq_sched_restart().

Without the added memory barrier, either:

1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime
blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in
dispatch side

or

2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue
in dispatch side, meantime checking if there is request in
hctx->dispatch from blk_mq_sched_restart() is missed.

IO hang in ltp/fs_fill test is reported by kernel test robot:

	https://lkml.org/lkml/2020/7/26/77

Turns out it is caused by the above out-of-order OPs. And the IO hang
can't be observed any more after applying this patch.

Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-17 06:57:49 -07:00
Randy Dunlap
26bfeb2662 block: blk-mq.c: fix @at_head kernel-doc warning
Fix a kernel-doc warning in block/blk-mq.c:

../block/blk-mq.c:1844: warning: Function parameter or member 'at_head' not described in 'blk_mq_request_bypass_insert'

Fixes: 01e99aeca3 ("blk-mq: insert passthrough request into hctx->dispatch directly")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-16 16:50:28 -07:00
Linus Torvalds
382625d0d4 for-5.9/block-20200802
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8m7YwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpt+dEAC7a0HYuX2OrkyawBnsgd1QQR/soC7surec
 yDDa7SMM8cOq3935bfzcYHV9FWJszEGIknchiGb9R3/T+vmSohbvDsM5zgwya9u/
 FHUIuTq324I6JWXKl30k4rwjiX9wQeMt+WZ5gC8KJYCWA296i2IpJwd0A45aaKuS
 x4bTjxqknE+fD4gQiMUSt+bmuOUAp81fEku3EPapCRYDPAj8f5uoY7R2arT/POwB
 b+s+AtXqzBymIqx1z0sZ/XcdZKmDuhdurGCWu7BfJFIzw5kQ2Qe3W8rUmrQ3pGut
 8a21YfilhUFiBv+B4wptfrzJuzU6Ps0BXHCnBsQjzvXwq5uFcZH495mM/4E4OJvh
 SbjL2K4iFj+O1ngFkukG/F8tdEM1zKBYy2ZEkGoWKUpyQanbAaGI6QKKJA+DCdBi
 yPEb7yRAa5KfLqMiocm1qCEO1I56HRiNHaJVMqCPOZxLmpXj19Fs71yIRplP1Trv
 GGXdWZsccjuY6OljoXWdEfnxAr5zBsO3Yf2yFT95AD+egtGsU1oOzlqAaU1mtflw
 ABo452pvh6FFpxGXqz6oK4VqY4Et7WgXOiljA4yIGoPpG/08L1Yle4eVc2EE01Jb
 +BL49xNJVeUhGFrvUjPGl9kVMeLmubPFbmgrtipW+VRg9W8+Yirw7DPP6K+gbPAR
 RzAUdZFbWw==
 =abJG
 -----END PGP SIGNATURE-----

Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block

Pull core block updates from Jens Axboe:
 "Good amount of cleanups and tech debt removals in here, and as a
  result, the diffstat shows a nice net reduction in code.

   - Softirq completion cleanups (Christoph)

   - Stop using ->queuedata (Christoph)

   - Cleanup bd claiming (Christoph)

   - Use check_events, moving away from the legacy media change
     (Christoph)

   - Use inode i_blkbits consistently (Christoph)

   - Remove old unused writeback congestion bits (Christoph)

   - Cleanup/unify submission path (Christoph)

   - Use bio_uninit consistently, instead of bio_disassociate_blkg
     (Christoph)

   - sbitmap cleared bits handling (John)

   - Request merging blktrace event addition (Jan)

   - sysfs add/remove race fixes (Luis)

   - blk-mq tag fixes/optimizations (Ming)

   - Duplicate words in comments (Randy)

   - Flush deferral cleanup (Yufen)

   - IO context locking/retry fixes (John)

   - struct_size() usage (Gustavo)

   - blk-iocost fixes (Chengming)

   - blk-cgroup IO stats fixes (Boris)

   - Various little fixes"

* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
  block: blk-timeout: delete duplicated word
  block: blk-mq-sched: delete duplicated word
  block: blk-mq: delete duplicated word
  block: genhd: delete duplicated words
  block: elevator: delete duplicated word and fix typos
  block: bio: delete duplicated words
  block: bfq-iosched: fix duplicated word
  iocost_monitor: start from the oldest usage index
  iocost: Fix check condition of iocg abs_vdebt
  block: Remove callback typedefs for blk_mq_ops
  block: Use non _rcu version of list functions for tag_set_list
  blk-cgroup: show global disk stats in root cgroup io.stat
  blk-cgroup: make iostat functions visible to stat printing
  block: improve discard bio alignment in __blkdev_issue_discard()
  block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
  block: defer flush request no matter whether we have elevator
  block: make blk_timeout_init() static
  block: remove retry loop in ioc_release_fn()
  block: remove unnecessary ioc nested locking
  block: integrate bd_start_claiming into __blkdev_get
  ...
2020-08-03 11:57:03 -07:00
Randy Dunlap
70f15a4fd9 block: blk-mq: delete duplicated word
Drop the repeated word "the".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-31 16:29:47 -06:00
Daniel Wagner
08c875cbf4 block: Use non _rcu version of list functions for tag_set_list
tag_set_list is only accessed under the tag_set_lock lock. There is
no need for using the _rcu list functions.

The _rcu list function were introduced to allow read access to the
tag_set_list protected under RCU, see 705cda97ee ("blk-mq: Make it
safe to use RCU to iterate over blk_mq_tag_set.tag_list") and
05b7941394 ("Revert "blk-mq: don't handle TAG_SHARED in restart"").
Those changes got reverted later but the cleanup commit missed a
couple of places to undo the changes.

Fixes: 97889f9ac2 ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()"
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-28 09:37:09 -06:00
Baolin Wang
87890092ee blk-mq: remove redundant validation in __blk_mq_end_request()
We've already validated the 'q->elevator' before calling
->ops.completed_request() in blk_mq_sched_completed_request(), thus no
need to validate rq->internal_tag again. Rmove it.

Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-10 07:58:33 -06:00
Ming Lei
568f270065 blk-mq: centralise related handling into blk_mq_get_driver_tag
Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.

Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08 16:06:42 -06:00
Ming Lei
7bf137298c blk-mq: streamline handling of q->mq_ops->queue_rq result
Current handling of q->mq_ops->queue_rq result is a bit ugly:

- two branches which needs to 'continue' have to check if the
dispatch local list is empty, otherwise one bad request may
be retrieved via 'rq = list_first_entry(list, struct request, queuelist);'

- the branch of 'if (unlikely(ret != BLK_STS_OK))' isn't easy
to follow, since it is actually one error branch.

Streamline this handling, so the code becomes more readable, meantime
potential kernel oops can be avoided in case that the last request in
local dispatch list is failed.

Fixes: fc17b6534e ("blk-mq: switch ->queue_rq return value to blk_status_t")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08 16:04:39 -06:00
Ming Lei
05a4fed69f blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight()
dm-multipath is the only user of blk_mq_queue_inflight().  When
dm-multipath calls blk_mq_queue_inflight() to check if it has
outstanding IO it can get a false negative.  The reason for this is
blk_mq_rq_inflight() doesn't consider requests that are no longer
MQ_RQ_IN_FLIGHT but that are now MQ_RQ_COMPLETE (->complete isn't
called or finished yet) as "inflight".

This causes request-based dm-multipath's dm_wait_for_completion() to
return before all outstanding dm-multipath requests have actually
completed.  This breaks DM multipath's suspend functionality because
blk-mq requests complete after DM's suspend has finished -- which
shouldn't happen.

Fix this by considering any request not in the MQ_RQ_IDLE state
(so either MQ_RQ_COMPLETE or MQ_RQ_IN_FLIGHT) as "inflight" in
blk_mq_rq_inflight().

Fixes: 3c94d83cb3 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-07 09:06:25 -06:00
Jens Axboe
4e2f62e566 Revert "blk-mq: put driver tag when this request is completed"
This reverts commits the following commits:

	37f4a24c24
	723bf178f1
	36a3df5a45

The last one is the culprit, but we have to go a bit deeper to get this
to revert cleanly. There's been a report that this breaks some MMC
setups [1], and also causes an issue with swap [2]. Until this can be
figured out, revert the offending commits.

[1] https://lore.kernel.org/linux-block/57fb09b1-54ba-f3aa-f82c-d709b0e6b281@samsung.com/
[2] https://lore.kernel.org/linux-block/20200702043721.GA1087@lca.pw/

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 22:58:32 -06:00
Christoph Hellwig
c62b37d96b block: move ->make_request_fn to struct block_device_operations
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector.  Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does).  Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 07:27:24 -06:00
Christoph Hellwig
f695ca3886 block: remove the request_queue argument from blk_queue_split
The queue can be trivially derived from the bio, so pass one less
argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 07:27:23 -06:00
Ming Lei
37f4a24c24 blk-mq: centralise related handling into blk_mq_get_driver_tag
Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.

Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 12:57:59 -06:00
Ming Lei
723bf178f1 blk-mq: move blk_mq_put_driver_tag() into blk-mq.c
It is used by blk-mq.c only, so move it to the source file.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 12:57:59 -06:00
Ming Lei
570e9b73b0 blk-mq: move blk_mq_get_driver_tag into blk-mq.c
blk_mq_get_driver_tag() is only used by blk-mq.c and is supposed to
stay in blk-mq.c, so move it and preparing for cleanup code of
get/put driver tag.

Meantime hctx_may_queue() is moved to header file and it is fine
since it is defined as inline always.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 12:57:59 -06:00
Ming Lei
6e6fcbc27e blk-mq: support batching dispatch in case of io
More and more drivers want to get batching requests queued from
block layer, such as mmc, and tcp based storage drivers. Also
current in-tree users have virtio-scsi, virtio-blk and nvme.

For none, we already support batching dispatch.

But for io scheduler, every time we just take one request from scheduler
and pass the single request to blk_mq_dispatch_rq_list(). This way makes
batching dispatch not possible when io scheduler is applied. One reason
is that we don't want to hurt sequential IO performance, becasue IO
merge chance is reduced if more requests are dequeued from scheduler
queue.

Try to support batching dispatch for io scheduler by starting with the
following simple approach:

1) still make sure we can get budget before dequeueing request

2) use hctx->dispatch_busy to evaluate if queue is busy, if it is busy
we fackback to non-batching dispatch, otherwise dequeue as many as
possible requests from scheduler, and pass them to blk_mq_dispatch_rq_list().

Wrt. 2), we use similar policy for none, and turns out that SCSI SSD
performance got improved much.

In future, maybe we can develop more intelligent algorithem for batching
dispatch.

Baolin has tested this patch and found that MMC performance is improved[3].

[1] https://lore.kernel.org/linux-block/20200512075501.GF1531898@T590/#r
[2] https://lore.kernel.org/linux-block/fe6bd8b9-6ed9-b225-f80c-314746133722@grimberg.me/
[3] https://lore.kernel.org/linux-block/CADBw62o9eTQDJ9RvNgEqSpXmg6Xcq=2TxH0Hfxhp29uF2W=TXA@mail.gmail.com/

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 07:51:48 -06:00
Ming Lei
1fd40b5ea7 blk-mq: pass obtained budget count to blk_mq_dispatch_rq_list
Pass obtained budget count to blk_mq_dispatch_rq_list(), and prepare
for supporting fully batching submission.

With the obtained budget count, it is easier to put extra budgets
in case of .queue_rq failure.

Meantime remove the old 'got_budget' parameter.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 07:51:48 -06:00
Ming Lei
bbdb3c5d94 blk-mq: remove dead check from blk_mq_dispatch_rq_list
When BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE is returned from
.queue_rq, the 'list' variable always holds this rq which isn't
queued to LLD successfully.

So blk_mq_dispatch_rq_list() always returns false from the branch
of '!list_empty(list)'.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 07:51:48 -06:00
Ming Lei
7538352453 blk-mq: move getting driver tag and budget into one helper
Move code for getting driver tag and budget into one helper, so
blk_mq_dispatch_rq_list gets a bit simplified, and easier to read.

Meantime move updating of 'no_tag' and 'no_budget_available' into
the branch for handling partial dispatch because that is exactly
consumer of the two local variables.

Also rename the parameter of 'got_budget' as 'ask_budget'.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 07:51:48 -06:00
Ming Lei
445874e89f blk-mq: pass hctx to blk_mq_dispatch_rq_list
All requests in the 'list' of blk_mq_dispatch_rq_list belong to same
hctx, so it is better to pass hctx instead of request queue, because
blk-mq's dispatch target is hctx instead of request queue.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 07:51:48 -06:00
Ming Lei
65c7636943 blk-mq: pass request queue into get/put budget callback
blk-mq budget is abstract from scsi's device queue depth, and it is
always per-request-queue instead of hctx.

It can be quite absurd to get a budget from one hctx, then dequeue a
request from scheduler queue, and this request may not belong to this
hctx, at least for bfq and deadline.

So fix the mess and always pass request queue to get/put budget
callback.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30 07:51:48 -06:00
Christoph Hellwig
42fdc5e49c blk-mq: remove the BLK_MQ_REQ_INTERNAL flag
Just check for a non-NULL elevator directly to make the code more clear.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29 09:56:18 -06:00
Ming Lei
36a3df5a45 blk-mq: put driver tag when this request is completed
It is natural to release driver tag when this request is completed by
LLD or device since its purpose is for LLD use.

One big benefit is that the released tag can be re-used quicker since
bio_endio() may take too long.

Meantime we don't need to release driver tag for flush request.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29 09:56:10 -06:00
Christoph Hellwig
40d09b53bf blk-mq: add a new blk_mq_complete_request_remote API
This is a variant of blk_mq_complete_request_remote that only completes
the request if it needs to be bounced to another CPU or a softirq.  If
the request can be completed locally the function returns false and lets
the driver complete it without requring and indirect function call.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
963395269c blk-mq: factor out a blk_mq_complete_need_ipi helper
Add a helper to decide if we can complete locally or need an IPI.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
4c8fc19686 blk-mq: remove the get_cpu/put_cpu pair in blk_mq_complete_request
We don't really care if we get migrated during the I/O completion.
In the worth case we either perform an IPI that wasn't required, or
complete the request on a CPU which we just migrated off.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
15f73f5b3e blk-mq: move failure injection out of blk_mq_complete_request
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
d391a7a399 blk-mq: merge the softirq vs non-softirq IPI logic
Both the softirq path for single queue devices and the multi-queue
completion handler share the same logic to figure out if we need an
IPI for the completion and eventually issue it.  Merge the two
versions into a single unified code path.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
d6cc464cc5 blk-mq: short cut the IPI path in blk_mq_force_complete_rq for !SMP
Let the compile optimize out the entire IPI path, given that we are
obviously not going to use it.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
6aab1da603 blk-mq: complete polled requests directly
Even for single queue devices there is no point in offloading a polled
completion to the softirq, given that blk_mq_force_complete_rq is called
from the polling thread in that case and thus there are no starvation
issues.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
dea6f39938 blk-mq: remove raise_blk_irq
By open coding raise_blk_irq in the only caller, and replacing the
ifdef CONFIG_SMP with an IS_ENABLED check the flow in the caller
can be significantly simplified.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:57 -06:00
Christoph Hellwig
115243f553 blk-mq: factor out a helper to reise the block softirq
Add a helper to deduplicate the logic that raises the block softirq.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:56 -06:00
Christoph Hellwig
c3077b5d97 blk-mq: merge blk-softirq.c into blk-mq.c
__blk_complete_request is only called from the blk-mq code, and
duplicates a lot of code from blk-mq.c.  Move it there to prepare
for better code sharing and simplifications.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24 09:15:56 -06:00
Weiping Zhang
fe35ec58f0 block: update hctx map when use multiple maps
There is an issue when tune the number for read and write queues,
if the total queue count was not changed. The hctx->type cannot
be updated, since __blk_mq_update_nr_hw_queues will return directly
if the total queue count has not been changed.

Reproduce:

dmesg | grep "default/read/poll"
[    2.607459] nvme nvme0: 48/0/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
     48 default

tune the write queues to 24:
echo 24 > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller

dmesg | grep "default/read/poll"
[  433.547235] nvme nvme0: 24/24/0 default/read/poll queues

cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
     48 default

The driver's hardware queue mapping is not same as block layer.

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17 21:33:04 -06:00
Christoph Hellwig
d94ecfc399 blk-mq: split out a __blk_mq_get_driver_tag helper
Allocation of the driver tag in the case of using a scheduler shares very
little code with the "normal" tag allocation.  Split out a new helper to
streamline this path, and untangle it from the complex normal tag
allocation.

This way also avoids to fail driver tag allocation because of inactive hctx
during cpu hotplug, and fixes potential hang risk.

Fixes: bf0beec060 ("blk-mq: drain I/O when all CPUs in a hctx are offline")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-07 08:56:50 -06:00
Ming Lei
bf0beec060 blk-mq: drain I/O when all CPUs in a hctx are offline
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup
up queue mapping. Thomas mentioned the following point[1]:

"That was the constraint of managed interrupts from the very beginning:

 The driver/subsystem has to quiesce the interrupt line and the associated
 queue _before_ it gets shutdown in CPU unplug and not fiddle with it
 until it's restarted by the core when the CPU is plugged in again."

However, current blk-mq implementation doesn't quiesce hw queue before
the last CPU in the hctx is shutdown.  Even worse, CPUHP_BLK_MQ_DEAD is a
cpuhp state handled after the CPU is down, so there isn't any chance to
quiesce the hctx before shutting down the CPU.

Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs
where the last CPU goes away, and wait for completion of in-flight
requests.  This guarantees that there is no inflight I/O before shutting
down the managed IRQ.

Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need
to wait for completion of in-flight requests from these drivers to avoid
a potential dead-lock. It is safe to do this for stacking drivers as those
do not use interrupts at all and their I/O completions are triggered by
underlying devices I/O completion.

[1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/

[hch: different retry mechanism, merged two patches, minor cleanups]

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:25 -06:00
Christoph Hellwig
600c3b0cea blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk_mq_alloc_request_hctx is only used for NVMeoF connect commands, so
tailor it to the specific requirements, and don't bother the general
fast path code with its special twinkles.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:25 -06:00
Christoph Hellwig
766473681c blk-mq: use BLK_MQ_NO_TAG in more places
Replace various magic -1 constants for tags with BLK_MQ_NO_TAG.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:25 -06:00
Christoph Hellwig
419c3d5e80 blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
To prepare for wider use of this constant give it a more applicable name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:25 -06:00
Christoph Hellwig
7ea4d8a4d6 blk-mq: move more request initialization to blk_mq_rq_ctx_init
Don't split request initialization between __blk_mq_alloc_request and
blk_mq_rq_ctx_init.  Also remove the op argument as it can be derived
from the blk_mq_alloc_data structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:24 -06:00
Christoph Hellwig
e6e7abffe3 blk-mq: simplify the blk_mq_get_request calling convention
The bio argument is entirely unused, and the request_queue can be passed
through the alloc_data, given that it needs to be filled out for the
low-level tag allocation anyway.  Also rename the function to
__blk_mq_alloc_request as the switch between get and alloc in the call
chains is rather confusing.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:24 -06:00
Christoph Hellwig
5d9c305b8e blk-mq: remove the bio argument to ->prepare_request
None of the I/O schedulers actually needs it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:23:24 -06:00
Keith Busch
7b11eab041 blk-mq: blk-mq: provide forced completion method
Drivers may need to bypass error injection for error recovery. Rename
__blk_mq_complete_request() to blk_mq_force_complete_rq() and export
that function so drivers may skip potential fake timeouts after they've
reclaimed lost requests.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29 10:21:59 -06:00
Konstantin Khlebnikov
b5af37ab3a block: add a blk_account_io_merge_bio helper
Move the non-"new_io" branch of blk_account_io_start() into separate
function.  Fix merge accounting for discards (they were counted as write
merges).

The new blk_account_io_merge_bio() doesn't call update_io_ticks() unlike
blk_account_io_start(), as there is no reason for that.

[hch: rebased]

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27 05:21:23 -06:00
Christoph Hellwig
ac7c5675fa blk-mq: allow blk_mq_make_request to consume the q_usage_counter reference
blk_mq_make_request currently needs to grab an q_usage_counter
reference when allocating a request.  This is because the block layer
grabs one before calling blk_mq_make_request, but also releases it as
soon as blk_mq_make_request returns.  Remove the blk_queue_exit call
after blk_mq_make_request returns, and instead let it consume the
reference.  This works perfectly fine for the block layer caller, just
device mapper needs an extra reference as the old problem still
persists there.  Open code blk_queue_enter_live in device mapper,
as there should be no other callers and this allows better documenting
why we do a non-try get.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19 09:34:29 -06:00
Christoph Hellwig
35b371ff01 blk-mq: remove a pointless queue enter pair in blk_mq_alloc_request_hctx
No need for two queue references.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19 09:34:29 -06:00
Christoph Hellwig
22fa792cd8 blk-mq: remove a pointless queue enter pair in blk_mq_alloc_request
No need for two queue references.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19 09:34:29 -06:00
Christoph Hellwig
a5ea581105 blk-mq: move the call to blk_queue_enter_live out of blk_mq_get_request
Move the blk_queue_enter_live calls into the callers, where they can
successively be cleaned up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19 09:34:29 -06:00
Satya Tangirala
a892c8d52c block: Inline encryption support for blk-mq
We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.

We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.

We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.

Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.

Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.

Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 09:47:53 -06:00
Keith Busch
0512a75b98 block: Introduce REQ_OP_ZONE_APPEND
Define REQ_OP_ZONE_APPEND to append-write sectors to a zone of a zoned
block device. This is a no-merge write operation.

A zone append write BIO must:
* Target a zoned block device
* Have a sector position indicating the start sector of the target zone
* The target zone must be a sequential write zone
* The BIO must not cross a zone boundary
* The BIO size must not be split to ensure that a single range of LBAs
  is written with a single command.

Implement these checks in generic_make_request_checks() using the
helper function blk_check_zone_append(). To avoid write append BIO
splitting, introduce the new max_zone_append_sectors queue limit
attribute and ensure that a BIO size is always lower than this limit.
Export this new limit through sysfs and check these limits in bio_full().

Also when a LLDD can't dispatch a request to a specific zone, it
will return BLK_STS_ZONE_RESOURCE indicating this request needs to
be delayed, e.g.  because the zone it will be dispatched to is still
write-locked. If this happens set the request aside in a local list
to continue trying dispatching requests such as READ requests or a
WRITE/ZONE_APPEND requests targetting other zones. This way we can
still keep a high queue depth without starving other requests even if
one request can't be served due to zone write-locking.

Finally, make sure that the bio sector position indicates the actual
write position as indicated by the device on completion.

Signed-off-by: Keith Busch <kbusch@kernel.org>
[ jth: added zone-append specific add_page and merge_page helpers ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12 20:36:28 -06:00
Weiping Zhang
aa880ad690 block: reset mapping if failed to update hardware queue count
When we increase hardware queue count, blk_mq_update_queue_map will
reset the mapping between cpu and hardware queue base on the hardware
queue count(set->nr_hw_queues). The mapping cannot be reset if it
encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will
continue using it, then blk_mq_map_swqueue will touch a invalid memory,
because the mapping points to a wrong hctx.

blktest block/030:

null_blk: module loaded
Increasing nr_hw_queues to 8 fails, fallback to 1
==================================================================
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830
Read of size 8 at addr 0000000000000128 by task nproc/8541

CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0xbb
kasan_report+0x45/0x60
check_memory_region+0x15e/0x1c0
__kasan_check_read+0x15/0x20
blk_mq_map_swqueue+0x2f2/0x830
__blk_mq_update_nr_hw_queues+0x3df/0x690
blk_mq_update_nr_hw_queues+0x32/0x50
nullb_device_submit_queues_store+0xde/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x14b/0x2d0
ksys_write+0xdd/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x310
entry_SYSCALL_64_after_hwframe+0x49/0xb3

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12 20:20:22 -06:00
Weiping Zhang
79fab52879 block: rename blk_mq_alloc_rq_maps
rename blk_mq_alloc_rq_maps to blk_mq_alloc_map_and_requests,
this function allocs both map and request, make function name align
with funtion.

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:13 -06:00
Weiping Zhang
03b63b029d block: rename __blk_mq_alloc_rq_map
rename __blk_mq_alloc_rq_map to __blk_mq_alloc_map_and_request,
actually it alloc both map and request, make function name
align with function.

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:13 -06:00
Ming Lei
fd689871bb block: alloc map and request for new hardware queue
Alloc new map and request for new hardware queue when increse
hardware queue count. Before this patch, it will show a
warning for each new hardware queue, but it's not enough, these
hctx have no maps and reqeust, when a bio was mapped to these
hardware queue, it will trigger kernel panic when get request
from these hctx.

Test environment:
 * A NVMe disk supports 128 io queues
 * 96 cpus in system

A corner case can always trigger this panic, there are 96
io queues allocated for HCTX_TYPE_DEFAULT type, the corresponding kernel
log: nvme nvme0: 96/0/0 default/read/poll queues. Now we set nvme write
queues to 96, then nvme will alloc others(32) queues for read, but
blk_mq_update_nr_hw_queues does not alloc map and request for these new
added io queues. So when process read nvme disk, it will trigger kernel
panic when get request from these hardware context.

Reproduce script:

nr=$(expr `cat /sys/block/nvme0n1/device/queue_count` - 1)
echo $nr > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
dd if=/dev/nvme0n1 of=/dev/null bs=4K count=1

[ 8040.805626] ------------[ cut here ]------------
[ 8040.805627] WARNING: CPU: 82 PID: 12921 at block/blk-mq.c:2578 blk_mq_map_swqueue+0x2b6/0x2c0
[ 8040.805627] Modules linked in: nvme nvme_core nf_conntrack_netlink xt_addrtype br_netfilter overlay xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nf_conntrack_tftp nft_masq nf_tables_set nft_fib_inet nft_f
ib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack tun bridge nf_defrag_ipv6 nf_defrag_ipv4 stp llc ip6_tables ip_tables nft_compat rfkill ip_set nf_tables nfne
tlink sunrpc intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass ipmi_ssif crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_
cstate intel_uncore raid0 joydev intel_rapl_perf ipmi_si pcspkr mei_me ioatdma sg ipmi_devintf mei i2c_i801 dca lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sd_mod ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm d
rm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
[ 8040.805637]  ahci drm i40e libahci crc32c_intel libata t10_pi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nvme_core]
[ 8040.805640] CPU: 82 PID: 12921 Comm: kworker/u194:2 Kdump: loaded Tainted: G        W         5.6.0-rc5.78317c+ #2
[ 8040.805640] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 8040.805641] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[ 8040.805642] RIP: 0010:blk_mq_map_swqueue+0x2b6/0x2c0
[ 8040.805643] Code: 00 00 00 00 00 41 83 c5 01 44 39 6d 50 77 b8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b bb 98 00 00 00 89 d6 e8 8c 81 03 00 eb 83 <0f> 0b e9 52 ff ff ff 0f 1f 00 0f 1f 44 00 00 41 57 48 89 f1 41 56
[ 8040.805643] RSP: 0018:ffffba590d2e7d48 EFLAGS: 00010246
[ 8040.805643] RAX: 0000000000000000 RBX: ffff9f013e1ba800 RCX: 000000000000003d
[ 8040.805644] RDX: ffff9f00ffff6000 RSI: 0000000000000003 RDI: ffff9ed200246d90
[ 8040.805644] RBP: ffff9f00f6a79860 R08: 0000000000000000 R09: 000000000000003d
[ 8040.805645] R10: 0000000000000001 R11: ffff9f0138c3d000 R12: ffff9f00fb3a9008
[ 8040.805645] R13: 000000000000007f R14: ffffffff96822660 R15: 000000000000005f
[ 8040.805645] FS:  0000000000000000(0000) GS:ffff9f013fa80000(0000) knlGS:0000000000000000
[ 8040.805646] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8040.805646] CR2: 00007f7f397fa6f8 CR3: 0000003d8240a002 CR4: 00000000007606e0
[ 8040.805647] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8040.805647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8040.805647] PKRU: 55555554
[ 8040.805647] Call Trace:
[ 8040.805649]  blk_mq_update_nr_hw_queues+0x31b/0x390
[ 8040.805650]  nvme_reset_work+0xb4b/0xeab [nvme]
[ 8040.805651]  process_one_work+0x1a7/0x370
[ 8040.805652]  worker_thread+0x1c9/0x380
[ 8040.805653]  ? max_active_store+0x80/0x80
[ 8040.805655]  kthread+0x112/0x130
[ 8040.805656]  ? __kthread_parkme+0x70/0x70
[ 8040.805657]  ret_from_fork+0x35/0x40
[ 8040.805658] ---[ end trace b5f13b1e73ccb5d3 ]---
[ 8229.365135] BUG: kernel NULL pointer dereference, address: 0000000000000004
[ 8229.365165] #PF: supervisor read access in kernel mode
[ 8229.365178] #PF: error_code(0x0000) - not-present page
[ 8229.365191] PGD 0 P4D 0
[ 8229.365201] Oops: 0000 [#1] SMP PTI
[ 8229.365212] CPU: 77 PID: 13024 Comm: dd Kdump: loaded Tainted: G        W         5.6.0-rc5.78317c+ #2
[ 8229.365232] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 8229.365253] RIP: 0010:blk_mq_get_tag+0x227/0x250
[ 8229.365265] Code: 44 24 04 44 01 e0 48 8b 74 24 38 65 48 33 34 25 28 00 00 00 75 33 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e c3 48 8d 68 10 4c 89 ef <44> 8b 60 04 48 89 ee e8 dd f9 ff ff 83 f8 ff 75 c8 e9 67 fe ff ff
[ 8229.365304] RSP: 0018:ffffba590e977970 EFLAGS: 00010246
[ 8229.365317] RAX: 0000000000000000 RBX: ffff9f00f6a79860 RCX: ffffba590e977998
[ 8229.365333] RDX: 0000000000000000 RSI: ffff9f012039b140 RDI: ffffba590e977a38
[ 8229.365349] RBP: 0000000000000010 R08: ffffda58ff94e190 R09: ffffda58ff94e198
[ 8229.365365] R10: 0000000000000011 R11: ffff9f00f6a79860 R12: 0000000000000000
[ 8229.365381] R13: ffffba590e977a38 R14: ffff9f012039b140 R15: 0000000000000001
[ 8229.365397] FS:  00007f481c230580(0000) GS:ffff9f013f940000(0000) knlGS:0000000000000000
[ 8229.365415] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8229.365428] CR2: 0000000000000004 CR3: 0000005f35e26004 CR4: 00000000007606e0
[ 8229.365444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8229.365460] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8229.365476] PKRU: 55555554
[ 8229.365484] Call Trace:
[ 8229.365498]  ? finish_wait+0x80/0x80
[ 8229.365512]  blk_mq_get_request+0xcb/0x3f0
[ 8229.365525]  blk_mq_make_request+0x143/0x5d0
[ 8229.365538]  generic_make_request+0xcf/0x310
[ 8229.365553]  ? scan_shadow_nodes+0x30/0x30
[ 8229.365564]  submit_bio+0x3c/0x150
[ 8229.365576]  mpage_readpages+0x163/0x1a0
[ 8229.365588]  ? blkdev_direct_IO+0x490/0x490
[ 8229.365601]  read_pages+0x6b/0x190
[ 8229.365612]  __do_page_cache_readahead+0x1c1/0x1e0
[ 8229.365626]  ondemand_readahead+0x182/0x2f0
[ 8229.365639]  generic_file_buffered_read+0x590/0xab0
[ 8229.365655]  new_sync_read+0x12a/0x1c0
[ 8229.365666]  vfs_read+0x8a/0x140
[ 8229.365676]  ksys_read+0x59/0xd0
[ 8229.365688]  do_syscall_64+0x55/0x1d0
[ 8229.365700]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:13 -06:00
Weiping Zhang
a2584e43f5 block: save previous hardware queue count before udpate
blk_mq_realloc_tag_set_tags will update set->nr_hw_queues, so
save old set->nr_hw_queues before call this function.

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:12 -06:00
Weiping Zhang
2e194422f1 block: free both rq_map and request
Allocation:

__blk_mq_alloc_rq_map
	blk_mq_alloc_rq_map
		blk_mq_alloc_rq_map
			tags = blk_mq_init_tags : kzalloc_node:
			tags->rqs = kcalloc_node
			tags->static_rqs = kcalloc_node
	blk_mq_alloc_rqs
		p = alloc_pages_node
		tags->static_rqs[i] = p + offset;

Free:

blk_mq_free_rq_map
	kfree(tags->rqs);
	kfree(tags->static_rqs);
	blk_mq_free_tags
		kfree(tags);

The page allocated in blk_mq_alloc_rqs cannot be released,
so we should use blk_mq_free_map_and_requests here.

blk_mq_free_map_and_requests
	blk_mq_free_rqs
		__free_pages : cleanup for blk_mq_alloc_rqs
	blk_mq_free_rq_map : cleanup for blk_mq_alloc_rq_map

Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:12 -06:00
Christoph Hellwig
8cf7961dab block: bypass ->make_request_fn for blk-mq drivers
Call blk_mq_make_request when no ->make_request_fn is set.  This is
safe now that blk_alloc_queue always sets up the pointer for make_request
based drivers.  This avoids an indirect call in the blk-mq driver I/O
fast path, which is rather expensive due to spectre mitigations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-25 09:45:44 -06:00
Christoph Hellwig
bdf8710d69 block: move dma_pad handling from blk_rq_map_sg into the callers
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set
the dma_pad value in the queue.  Move the handling into those callers
instead of burdening the common code, and move the ->extra_len field
from struct request to struct scsi_cmnd.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-22 10:47:39 -06:00
Christoph Hellwig
cc97923a5b block: move dma drain handling to scsi
Don't burden the common block code with with specifics of the libata DMA
draining mechanism.  Instead move most of the code to the scsi midlayer.

That also means the nr_phys_segments adjustments in the blk-mq fast path
can go away entirely, given that SCSI never looks at nr_phys_segments
after mapping the request to a scatterlist.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-22 10:47:35 -06:00
Douglas Anderson
b9151e7bca blk-mq: Add blk_mq_delay_run_hw_queues() API call
We have:
* blk_mq_run_hw_queue()
* blk_mq_delay_run_hw_queue()
* blk_mq_run_hw_queues()

...but not blk_mq_delay_run_hw_queues(), presumably because nobody
needed it before now.  Since we need it for a later patch in this
series, add it.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-20 10:34:56 -06:00
Douglas Anderson
ab3cee3762 blk-mq: In blk_mq_dispatch_rq_list() "no budget" is a reason to kick
In blk_mq_dispatch_rq_list(), if blk_mq_sched_needs_restart() returns
true and the driver returns BLK_STS_RESOURCE then we'll kick the
queue.  However, there's another case where we might need to kick it.
If we were unable to get budget we can be in much the same state as
when the driver returns BLK_STS_RESOURCE, so we should treat it the
same.

It should be noted that even if we add a whole bunch of extra kicking
to the queue in other patches this patch is still important.
Specifically any kicking that happened before we re-spliced leftover
requests into 'hctx->dispatch' wouldn't have found any work, so we
really need to make sure we kick ourselves after we've done the
splicing.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-20 10:34:56 -06:00
John Garry
5fe56de799 blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget
If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.

Fix by putting the driver tag for that request.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-16 09:27:03 -06:00
Keith Busch
536167d47a blk-mq: don't commit_rqs() if none were queued
Unburden the drivers from checking if a call to commit_rqs() is valid by
not calling it when there are no requests to commit.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-06 13:43:56 -06:00
Christoph Hellwig
3d745ea5b0 block: simplify queue allocation
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper.  Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter.  A lower-level __blk_alloc_queue is kept for the blk-mq case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27 10:23:43 -06:00
Christoph Hellwig
2f227bb999 block: add a blk_mq_init_queue_data helper
This allows a driver to pass a queuedata member before ->init_hctx is
called.  null_blk currently open codes this logic, but I'd rather have
it in the core to ease future maintainance.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27 10:23:43 -06:00
Johannes Thumshirn
c92a41031a block: factor out requeue handling from dispatch code
Factor out the requeue handling from the dispatch code, this will make
subsequent addition of different requeueing schemes easier.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 09:40:24 -06:00
Guoqing Jiang
754a15726f block: remove unneeded argument from blk_alloc_flush_queue
Remove 'q' from arguments since it is not used anymore after
commit 7e992f847a ("block: remove non mq parts from the
flush code").

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:42:54 -06:00
Bart Van Assche
d0930bb8f4 blk-mq: Fix a recently introduced regression in blk_mq_realloc_hw_ctxs()
q->nr_hw_queues must only be updated once it is known that
blk_mq_realloc_hw_ctxs() has succeeded. Otherwise it can happen that
reallocation fails and that q->nr_hw_queues is larger than the number of
allocated hardware queues. This patch fixes the following crash if
increasing the number of hardware queues fails:

BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x775/0x810
Write of size 8 at addr 0000000000000118 by task check/977

CPU: 3 PID: 977 Comm: check Not tainted 5.6.0-rc1-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 check_memory_region+0x140/0x1b0
 memset+0x28/0x40
 blk_mq_map_swqueue+0x775/0x810
 blk_mq_update_nr_hw_queues+0x468/0x710
 nullb_device_submit_queues_store+0xf7/0x1a0 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ac0d6b926e ("block: Reduce the amount of memory required per request queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-10 07:09:59 -06:00
Bart Van Assche
6e66b49392 blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync
blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:

WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
 blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
 blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
 blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
 worker_thread+0x98/0xe40 kernel/workqueue.c:2415
 kthread+0x361/0x430 kernel/kthread.c:255

Fixes: ed76e329d7 ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-10 07:09:59 -06:00
John Garry
cae740a04b blk-mq: Remove some unused function arguments
The struct blk_mq_hw_ctx pointer argument in blk_mq_put_tag(),
blk_mq_poll_nsecs(), and blk_mq_poll_hybrid_sleep() is unused, so remove
it.

Overall obj code size shows a minor reduction, before:
   text	   data	    bss	    dec	    hex	filename
  27306	   1312	      0	  28618	   6fca	block/blk-mq.o
   4303	    272	      0	   4575	   11df	block/blk-mq-tag.o

after:
  27282	   1312	      0	  28594	   6fb2	block/blk-mq.o
   4311	    272	      0	   4583	   11e7	block/blk-mq-tag.o

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
--
This minor patch had been carried as part of the blk-mq shared tags RFC,
I'd rather not carry it anymore as it required rebasing, so now or never..
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-26 10:34:41 -07:00
Ming Lei
01e99aeca3 blk-mq: insert passthrough request into hctx->dispatch directly
For some reason, device may be in one situation which can't handle
FS request, so STS_RESOURCE is always returned and the FS request
will be added to hctx->dispatch. However passthrough request may
be required at that time for fixing the problem. If passthrough
request is added to scheduler queue, there isn't any chance for
blk-mq to dispatch it given we prioritize requests in hctx->dispatch.
Then the FS IO request may never be completed, and IO hang is caused.

So passthrough request has to be added to hctx->dispatch directly
for fixing the IO hang.

Fix this issue by inserting passthrough request into hctx->dispatch
directly together withing adding FS request to the tail of
hctx->dispatch in blk_mq_dispatch_rq_list(). Actually we add FS request
to tail of hctx->dispatch at default, see blk_mq_request_bypass_insert().

Then it becomes consistent with original legacy IO request
path, in which passthrough request is always added to q->queue_head.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-24 18:50:48 -07:00
André Almeida
105663f73e blk-mq: Document functions for sending request
Add or improve documentation for function regarding creating and sending
IO requests to the hardware.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-06 21:00:27 -07:00
Pavel Begunkov
95ed0c5b12 blk-mq: optimise blk_mq_flush_plug_list()
Instead of using list_del_init() in a loop, that generates a lot of
unnecessary memory read/writes, iterate from the first request of a
batch and cut out a sublist with list_cut_before().

Apart from removing the list node initialisation part, this is more
register-friendly, and the assembly uses the stack less intensively.

list_empty() at the beginning is done with hope, that the compiler can
optimise out the same check in the following list_splice_init().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-19 06:08:50 -07:00
Pavel Begunkov
7d30a62102 blk-mq: optimise rq sort function
Check "!=" in multi-layer comparisons. The same memory usage, fewer
instructions, and 2 from 4 jumps are replaced with SETcc.

Note, that list_sort() doesn't differ 0 and <0.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-19 06:08:50 -07:00
John Garry
cb711b91a3 blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
These functions are not referenced, so delete them.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13 12:50:38 -07:00
John Garry
626fb735a4 blk-mq: Make blk_mq_run_hw_queue() return void
Since commit 97889f9ac2 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()"), the return value of blk_mq_run_hw_queue()
is never checked, so make it return void, which very marginally simplifies
the code.

Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-01 08:42:41 -06:00
André Almeida
1fead7182f blk-mq: remove needless goto from blk_mq_get_driver_tag
The only usage of the label "done" is when (rq->tag != -1) at the
beginning of the function. Rather than jumping to label, we can just
remove this label and execute the code at the "if". Besides that, the
code that would be executed after the label "done" is the return of the
logical expression (rq->tag != -1) but since we are already inside the
if, we now that this is true. Remove the label and replace the goto with
the proper result of the label.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:28:10 -06:00
Bart Van Assche
f7e76dbc24 block: Reduce the amount of memory used for tag sets
Instead of allocating an array of size nr_cpu_ids for set->tags, allocate
an array of size set->nr_hw_queues. This patch improves behavior that was
introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w context count").

Reallocating tag sets from inside __blk_mq_update_nr_hw_queues() is safe
because:
- All request queues that share the tag sets are frozen before the tag sets
  are reallocated.
- blk_mq_queue_tag_busy_iter() holds q->q_usage_counter while active and
  hence is serialized against __blk_mq_update_nr_hw_queues().

Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:12:20 -06:00
Bart Van Assche
ac0d6b926e block: Reduce the amount of memory required per request queue
Instead of always allocating at least nr_cpu_ids hardware queues per request
queue, reallocate q->queue_hw_ctx if it has to grow. This patch improves
behavior that was introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w
context count").

Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:12:18 -06:00
Bart Van Assche
a9a808084d block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()
Since the blk_mq_{,un}freeze_queue() calls in __blk_mq_update_nr_hw_queues()
already serialize __blk_mq_update_nr_hw_queues() against
blk_mq_queue_tag_busy_iter(), the synchronize_rcu() call in
__blk_mq_update_nr_hw_queues() is not necessary. Hence remove it.

Note: the synchronize_rcu() call in __blk_mq_update_nr_hw_queues() was
introduced by commit f5bbbbe4d6 ("blk-mq: sync the update nr_hw_queues with
blk_mq_queue_tag_busy_iter"). Commit 530ca2c9bd ("blk-mq: Allow blocking
queue tag iter callbacks") removed the rcu_read_{,un}lock() calls that
correspond to the synchronize_rcu() call in __blk_mq_update_nr_hw_queues().

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:12:17 -06:00
Pavel Begunkov
a2e80f6f04 blk-mq: Embed counters into struct mq_inflight
Store inflight counters immediately in struct mq_inflight.
That's type-safer and removes extra indirection.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07 08:31:59 -06:00
Pavel Begunkov
bb4e6b1491 blk-mq: Reuse callback in blk_mq_in_flight*()
Reuse a more generic callback in both blk_mq_in_flight() and
blk_mq_in_flight_rw().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07 08:31:59 -06:00
Pavel Begunkov
27a46989a8 blk-mq: Inline status checkers
blk_mq_request_completed() and blk_mq_request_started() are
short, inline it.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07 08:31:59 -06:00
Bart Van Assche
9566256518 block: Remove request_queue.nr_queues
Commit 897bb0c7f1 ("blk-mq: Use proper cpumask iterator"; v4.6)
removed the last use of request_queue.nr_queues from outside
blk_mq_init_allocate_queue(). Remove this member variable to make
struct request_queue smaller. This patch does not change any
functionality.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07 08:31:59 -06:00
Ming Lei
3154df262d blk-mq: apply normal plugging for HDD
Some HDD drive may expose multiple hardware queues, such as MegraRaid.
Let's apply the normal plugging for such devices because sequential IO
may benefit a lot from plug merging.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27 11:40:21 -06:00
Ming Lei
a12de1d42d blk-mq: honor IO scheduler for multiqueue devices
If a device is using multiple queues, the IO scheduler may be bypassed.
This may hurt performance for some slow MQ devices, and it also breaks
zoned devices which depend on mq-deadline for respecting the write order
in one zone.

Don't bypass io scheduler if we have one setup.

This patch can double sequential write performance basically on MQ
scsi_debug when mq-deadline is applied.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27 11:38:28 -06:00
Yufen Yu
8d6996630c block: fix null pointer dereference in blk_mq_rq_timed_out()
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:

[  108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[  108.827059] PGD 0 P4D 0
[  108.827313] Oops: 0000 [#1] SMP PTI
[  108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[  108.829503] Workqueue: kblockd blk_mq_timeout_work
[  108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[  108.838191] Call Trace:
[  108.838406]  bt_iter+0x74/0x80
[  108.838665]  blk_mq_queue_tag_busy_iter+0x204/0x450
[  108.839074]  ? __switch_to_asm+0x34/0x70
[  108.839405]  ? blk_mq_stop_hw_queue+0x40/0x40
[  108.839823]  ? blk_mq_stop_hw_queue+0x40/0x40
[  108.840273]  ? syscall_return_via_sysret+0xf/0x7f
[  108.840732]  blk_mq_timeout_work+0x74/0x200
[  108.841151]  process_one_work+0x297/0x680
[  108.841550]  worker_thread+0x29c/0x6f0
[  108.841926]  ? rescuer_thread+0x580/0x580
[  108.842344]  kthread+0x16a/0x1a0
[  108.842666]  ? kthread_flush_work+0x170/0x170
[  108.843100]  ret_from_fork+0x35/0x40

The bug is caused by the race between timeout handle and completion for
flush request.

When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.

After commit 12f5b93145 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.

However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.

We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>

-------
v2:
 - move rq_status from struct request to struct blk_flush_queue
v3:
 - remove unnecessary '{}' pair.
v4:
 - let spinlock to protect 'fq->rq_status'
v5:
 - move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-27 07:01:25 -06:00
Max Gurtovoy
54d4e6ab91 block: centralize PI remapping logic to the block layer
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>

Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17 20:03:49 -06:00
Linus Torvalds
7ad67ca553 for-5.4/block-2019-09-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl1/no0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpmo9EACFXMbdNmEEUMyRSdOkVLlr7ZlTyQi1tLpB
 YESDPxdBfybzpi0qa8JSaysGIfvSkSjmSAqBqrWPmASOSOL6CK4bbA4fTYbgPplk
 XeHUdgGiG34oCQUn8Xil5reYaTm7I6LQWnWTpVa5fIhAyUYaGJL+987ykoGmpQmB
 Dvf3YSc+8H0RTp9PCMVd6UCGPkZbVlLImGad3PF5ULvTEaE4RCXC2aiAgh0p1l5A
 J2CkRZ+/mio3zN2O4YN7VdPGfr1Wo1iZ834xbIGLegv1miHXagFk7jwTcC7zIt5t
 oSnJnqIg3iCe7SpWt4Bkzw/zy/2UqaspifbCMgw8vychlViVRUHFO5h85Yboo7kQ
 OMLEQPcwjm6dTHv5h1iXF9LW1O7NoiYmmgvApU9uOo1HUrl1X7PZ3JEfUsVHxkOO
 T4D5igf0Krsl1eAbiwEUQzy7vFZ8PlRHqrHgK+fkyotzHu1BJR7OQkYygEfGFOB/
 EfMxplGDpmibYGuWCwDX2bPAmLV3SPUQENReHrfPJRDt5TD1UkFpVGv/PLLhbr0p
 cLYI78DKpDSigBpVMmwq5nTYpnex33eyDTTA8C0sakcsdzdmU5qv30y3wm4nTiep
 f6gZo6IMXwRg/rCgVVrd9SKQAr/8wEzVlsDW3qyi2pVT8sHIgm0tFv7paihXGdDV
 xsKgmTrQQQ==
 =Qt+h
 -----END PGP SIGNATURE-----

Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...
2019-09-17 16:57:47 -07:00
Linus Torvalds
7f2444d38f Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core timer updates from Thomas Gleixner:
 "Timers and timekeeping updates:

   - A large overhaul of the posix CPU timer code which is a preparation
     for moving the CPU timer expiry out into task work so it can be
     properly accounted on the task/process.

     An update to the bogus permission checks will come later during the
     merge window as feedback was not complete before heading of for
     travel.

   - Switch the timerqueue code to use cached rbtrees and get rid of the
     homebrewn caching of the leftmost node.

   - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
     single function

   - Implement the separation of hrtimers to be forced to expire in hard
     interrupt context even when PREEMPT_RT is enabled and mark the
     affected timers accordingly.

   - Implement a mechanism for hrtimers and the timer wheel to protect
     RT against priority inversion and live lock issues when a (hr)timer
     which should be canceled is currently executing the callback.
     Instead of infinitely spinning, the task which tries to cancel the
     timer blocks on a per cpu base expiry lock which is held and
     released by the (hr)timer expiry code.

   - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
     resulting in faster access to timekeeping functions.

   - Updates to various clocksource/clockevent drivers and their device
     tree bindings.

   - The usual small improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
  posix-cpu-timers: Fix permission check regression
  posix-cpu-timers: Always clear head pointer on dequeue
  hrtimer: Add a missing bracket and hide `migration_base' on !SMP
  posix-cpu-timers: Make expiry_active check actually work correctly
  posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
  tick: Mark sched_timer to expire in hard interrupt context
  hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
  x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
  posix-cpu-timers: Utilize timerqueue for storage
  posix-cpu-timers: Move state tracking to struct posix_cputimers
  posix-cpu-timers: Deduplicate rlimit handling
  posix-cpu-timers: Remove pointless comparisons
  posix-cpu-timers: Get rid of 64bit divisions
  posix-cpu-timers: Consolidate timer expiry further
  posix-cpu-timers: Get rid of zero checks
  rlimit: Rewrite non-sensical RLIMIT_CPU comment
  posix-cpu-timers: Respect INFINITY for hard RTTIME limit
  posix-cpu-timers: Switch thread group sampling to array
  posix-cpu-timers: Restructure expiry array
  posix-cpu-timers: Remove cputime_expires
  ...
2019-09-17 12:35:15 -07:00
Hou Tao
9a91b05bba block: also check RQF_STATS in blk_mq_need_time_stamp()
In __blk_mq_end_request() if block stats needs update, we should
ensure now is valid instead of 0 even when iostat is disabled.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-15 16:02:10 -06:00
Hou Tao
3d24430694 block: make rq sector size accessible for block stats
Currently rq->data_len will be decreased by partial completion or
zeroed by completion, so when blk_stat_add() is invoked, data_len
will be zero and there will never be samples in poll_cb because
blk_mq_poll_stats_bkt() will return -1 if data_len is zero.

We could move blk_stat_add() back to __blk_mq_complete_request(),
but that would make the effort of trying to call ktime_get_ns()
once in vain. Instead we can reuse throtl_size field, and use
it for both block stats and block throttle, and adjust the
logic in blk_mq_poll_stats_bkt() accordingly.

Fixes: 4bc6339a58 ("block: move blk_stat_add() to __blk_mq_end_request()")
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-15 16:02:08 -06:00
Damien Le Moal
737eb78e82 block: Delay default elevator initialization
When elevator_init_mq() is called from blk_mq_init_allocated_queue(),
the only information known about the device is the number of hardware
queues as the block device scan by the device driver is not completed
yet for most drivers. The device type and elevator required features
are not set yet, preventing to correctly select the default elevator
most suitable for the device.

This currently affects all multi-queue zoned block devices which default
to the "none" elevator instead of the required "mq-deadline" elevator.
These drives currently include host-managed SMR disks connected to a
smartpqi HBA and null_blk block devices with zoned mode enabled.
Upcoming NVMe Zoned Namespace devices will also be affected.

Fix this by adding the boolean elevator_init argument to
blk_mq_init_allocated_queue() to control the execution of
elevator_init_mq(). Two cases exist:
1) elevator_init = false is used for calls to
   blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this
   case, a call to elevator_init_mq() is added to __device_add_disk(),
   resulting in the delayed initialization of the queue elevator
   after the device driver finished probing the device information. This
   effectively allows elevator_init_mq() access to more information
   about the device.
2) elevator_init = true preserves the current behavior of initializing
   the elevator directly from blk_mq_init_allocated_queue(). This case
   is used for the special request based DM devices where the device
   gendisk is created before the queue initialization and device
   information (e.g. queue limits) is already known when the queue
   initialization is executed.

Additionally, to make sure that the elevator initialization is never
done while requests are in-flight (there should be none when the device
driver calls device_add_disk()), freeze and quiesce the device request
queue before calling blk_mq_init_sched() in elevator_init_mq().

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05 19:52:34 -06:00
Damien Le Moal
954b4a5ce4 block: Change elevator_init_mq() to always succeed
If the default elevator chosen is mq-deadline, elevator_init_mq() may
return an error if mq-deadline initialization fails, leading to
blk_mq_init_allocated_queue() returning an error, which in turn will
cause the block device initialization to fail and the device not being
exposed.

Instead of taking such extreme measure, handle mq-deadline
initialization failures in the same manner as when mq-deadline is not
available (no module to load), that is, default to the "none" scheduler.
With this change, elevator_init_mq() return type can be changed to void.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05 19:52:33 -06:00
Damien Le Moal
61db437d1c block: Cleanup elevator_init_mq() use
Instead of checking a queue tag_set BLK_MQ_F_NO_SCHED flag before
calling elevator_init_mq() to make sure that the queue supports IO
scheduling, use the elevator.c function elv_support_iosched() in
elevator_init_mq(). This does not introduce any functional change but
ensure that elevator_init_mq() does the right thing based on the queue
settings.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05 19:52:33 -06:00
Tejun Heo
6f816b4b74 blk-mq: add optional request->alloc_time_ns
There are currently two start time timestamps - start_time_ns and
io_start_time_ns.  The former marks the request allocation and and the
second issue-to-device time.  The planned io.weight controller needs
to measure the total time bios take to execute after it leaves rq_qos
including the time spent waiting for request to become available,
which can easily dominate on saturated devices.

This patch adds request->alloc_time_ns which records when the request
allocation attempt started.  As it isn't used for the usual stats,
make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and
QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are
no users and it's active only on queues which need it even when
compiled in.

v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME
    gating as suggested by Jens.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 21:17:10 -06:00
Ming Lei
c6ba933358 blk-mq: don't hold q->sysfs_lock in blk_mq_map_swqueue
blk_mq_map_swqueue() is called from blk_mq_init_allocated_queue()
and blk_mq_update_nr_hw_queues(). For the former caller, the kobject
isn't exposed to userspace yet. For the latter caller, hctx sysfs entries
and debugfs are un-registered before updating nr_hw_queues.

On the other hand, commit 2f8f1336a4 ("blk-mq: always free hctx after
request queue is freed") moves freeing hctx into queue's release
handler, so there won't be race with queue release path too.

So don't hold q->sysfs_lock in blk_mq_map_swqueue().

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27 10:40:20 -06:00
Jens Axboe
7b6620d7db block: remove REQ_NOWAIT_INLINE
We had a few issues with this code, and there's still a problem around
how we deal with error handling for chained/split bios. For now, just
revert the code and we'll try again with a thoroug solution. This
reverts commits:

e15c2ffa10 ("block: fix O_DIRECT error handling for bio fragments")
0eb6ddfb86 ("block: Fix __blkdev_direct_IO() for bio fragments")
6a43074e2f ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
893a1c9720 ("blk-mq: allow REQ_NOWAIT to return an error inline")

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15 11:09:16 -06:00