Pull io_uring fixes from Jens Axboe:
"A few fixes - most of them regression fixes from this cycle, but also
a few stable heading fixes, and a build fix for the included demo tool
since some systems now actually have gettid() available"
* tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
io_uring: fix openat/openat2 unified prep handling
io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL
tools/io_uring: fix compile breakage
io_uring: don't use retry based buffered reads for non-async bdev
io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there
io_uring: don't run task work on an exiting task
io_uring: drop 'ctx' ref on task work cancelation
io_uring: grab any needed state during defer prep
cnt was not used in nft_meta.sh
This patch also fixes 2 shellcheck SC2181 warnings:
"check exit code directly with e.g. 'if mycmd;', not indirectly with
$?."
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
run task on first CPU with netfilter counters reset and check
cpu meta after another ping
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some kernels builds might inline vfs_getattr call within fstat
syscall code path, so fentry/vfs_getattr trampoline is not called.
Add security_inode_getattr to allowlist and switch the d_path test stat
trampoline to security_inode_getattr.
Keeping dentry_open and filp_close, because they are in their own
files, so unlikely to be inlined, but in case they are, adding
security_file_open.
Adding flags that indicate trampolines were called and failing
the test if any of them got missed, so it's easier to identify
the issue next time.
Fixes: e4d1af4b16 ("selftests/bpf: Add test for d_path helper")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200918112338.2618444-1-jolsa@kernel.org
Code in btf__parse_raw() fails to detect raw BTF of non-native endianness
and assumes it must be ELF data, which then fails to parse as ELF and
yields a misleading error message:
root:/# bpftool btf dump file /sys/kernel/btf/vmlinux
libbpf: failed to get EHDR from /sys/kernel/btf/vmlinux
For example, this could occur after cross-compiling a BTF-enabled kernel
for a target with non-native endianness, which is currently unsupported.
Check for correct endianness and emit a clearer error message:
root:/# bpftool btf dump file /sys/kernel/btf/vmlinux
libbpf: non-native BTF endianness is not supported
Fixes: 94a1fedd63 ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/90f81508ecc57bc0da318e0fe0f45cfe49b17ea7.1600417359.git.Tony.Ambardar@gmail.com
Relocation for a call destination could point to a symbol that has
type STT_NOTYPE.
Lookup such a symbol when no function is available.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
It would seem none of the kernel continuous integration does this:
$ cd tools/io_uring
$ make
Otherwise it may have noticed:
cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o
io_uring-bench.c
io_uring-bench.c:133:12: error: static declaration of ‘gettid’
follows non-static declaration
133 | static int gettid(void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from io_uring-bench.c:27:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note:
previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
make: *** [<builtin>: io_uring-bench.o] Error 1
The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h
already defines gettid(). So prefix the local definition with
"lk_".
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of special-casing the specific case of shared registers, create
a default SYSCALL_RET_SET() macro (mirroring SYSCALL_NUM_SET()), that
writes to the SYSCALL_RET register. For architectures that can't set the
return value (for whatever reason), they can define SYSCALL_RET_SET()
without an associated SYSCALL_RET() macro. This also paves the way for
architectures that need to do special things to set the return value
(e.g. powerpc).
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20200912110820.597135-12-keescook@chromium.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Add a ftrace2bconf.sh under tools/bootconfig/scripts which generates
a bootconfig file from the current ftrace settings.
To read the ftrace settings, ftrace2bconf.sh requires the root
privilege (or sudo). The ftrace2bconf.sh will output the bootconfig
to stdout and error messages to stderr, so usually you'll run it as
# ftrace2bconf.sh > ftrace.bconf
Note that some ftrace configurations are not supported. For example,
function-call/callgraph trace/notrace settings are not supported because
the wildcard has been expanded and lost in the ftrace anymore.
Link: https://lkml.kernel.org/r/159704852163.175360.16738029520293360558.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a bconf2ftrace.sh under tools/bootconfig/scripts which generates
a shell script to setup boot-time trace from bootconfig file for testing
the bootconfig.
bconf2ftrace.sh will take a bootconfig file (includes boot-time tracing)
and convert it into a shell-script which is almost same as the boot-time
tracer does.
If --apply option is given, it also tries to apply those command to the
running kernel, which requires the root privilege (or sudo).
For example, if you just want to confirm the shell commands, save
the output as below.
# bconf2ftrace.sh ftrace.bconf > ftrace.sh
Or, you can apply it directly.
# bconf2ftrace.sh --apply ftrace.bconf
Note that some boot-time tracing parameters under kernel.* are not able
to set via tracefs nor procfs (e.g. tp_printk, traceoff_on_warning.),
so those are ignored.
Link: https://lkml.kernel.org/r/159704851101.175360.15119132351139842345.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da956795 ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
It is possible for alternative code to unconditionally jump out of the
alternative region. In such a case, if a fake jump is added at the end
of the alternative instructions, the fake jump will never be reached.
Since the fake jump is just a mean to make sure code validation does not
go beyond the set of alternatives, reaching it is not a requirement.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
save_reg already checks that the register being saved does not already
have a saved state.
Remove redundant checks before processing a register storing operation.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Add programs sve-test and fpsimd-test which spin reading and writing to
the SVE and FPSIMD registers, verifying the operations they perform. The
intended use is to leave them running to stress the context switch code's
handling of these registers which isn't compatible with what kselftest
does so they're not integrated into the framework but there's no other
obvious testsuite where they fit so let's store them here.
These tests were written by Dave Martin and lightly adapted by me.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200819114837.51466-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a test case that does some basic verification of the SVE ptrace
interface, forking off a child with known values in the registers and
then using ptrace to inspect and manipulate the SVE registers of the
child, including in FPSIMD mode to account for sharing between the SVE
and FPSIMD registers.
This program was written by Dave Martin and modified for kselftest by
me.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200819114837.51466-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
