Commit Graph

116 Commits

Author SHA1 Message Date
Andy Shevchenko
30cb2639aa dmaengine: dw: don't override platform data with autocfg
Let probe driver decide either it wants to auto configure the driver or have
explicitly defined properties.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-31 07:32:19 +05:30
Andy Shevchenko
6dbd80a919 dmaengine: dw: use dw_dmac autoconfiguration in PCI driver
Instead of hardconding a platform data for dw_dmac let's use it's own
autoconfiguration feature. Thus, remove hardcoded values.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 13:43:09 +05:30
Andy Shevchenko
39416677b9 dmaengine: dw: convert to __ffs()
We replace __fls() by __ffs() since we have to find a *minimum* data width that
satisfies both source and destination.

While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is.

Fixes: 4c2d56c574 (dw_dmac: introduce dwc_fast_fls())
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 13:43:09 +05:30
Andy Shevchenko
6bea0f6d1c dmaengine: dw: properly read DWC_PARAMS register
In case we have less than maximum allowed channels (8) and autoconfiguration is
enabled the DWC_PARAMS read is wrong because it uses different arithmetic to
what is needed for channel priority setup.

Re-do the caclulations properly. This now works on AVR32 board well.

Fixes: fed2574b3c (dw_dmac: introduce software emulation of LLP transfers)
Cc: yitian.bu@tangramtek.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 13:42:02 +05:30
Linus Torvalds
3527122745 dmaengine updates for 4.3-rc1
This time we have aded a new capability for  scatter-gathered memset using
 dmaengine APIs. This is supported in xdmac & hdmac drivers
 
 We have added support for reusing descriptors for examples like video
 buffers etc. Driver will follow
 
 The behaviour of descriptor ack has been clarified and documented
 
 New devices added are:
 - dma controller in sun[457]i SoCs
 - lpc18xx dmamux
 - ZTE ZX296702 dma controller
 - Analog Devices AXI-DMAC DMA controller
 - eDMA support for dma-crossbar
 - imx6sx support in imx-sdma driver
 - imx-sdma device to device support
 
 Others
 - jz4780 fixes
 - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is
   deprecated and fixes
 - ACPI support in X-Gene DMA engine driver
 - ipu irq fixes
 - mvxor fixes
 - minor fixes spread thru drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5+nSAAoJEHwUBw8lI4NHiXQQAI/++7PmUGZ6BDZGu0B9Bj7U
 JalNijm43p858nka1zVhDea8pi7Cq3zJdE8EAB7FPQGESvCODWr62oZBr+mSaQ1C
 oU1RTIRTSiU2HPE4EFeGUvVGrnmTbHR2b1apI1SU41gKn+oQ5RJRRoQwEVwO6uuZ
 1VYcUqhurIAZs1FrMIAUa2vg7KTcK9UotfwR2gGBmSvXMf1aJ/dNZC7i/pBJjoyt
 v6KrLuYjEBAJvY7l368+NhLY/MS+2xdCMQo84B+HNEG7eA7y2MFOcRPXQA3a7dzr
 NwNuAZcTYDU11r2jiAPcnBM5sPo4bokX6Td0oDbYH6Rn2uIWlof7jGIceUaWLQQq
 QGZc4QPI4KdjTGNedRN8g9zqv0irFVfDr5v1A+B7N7ehvlubnB4jV8LmLpqN6UQH
 B38VnDJ3hqdZ6j9RHQTyUoQskSYMPbOAUYbL0qQLkyx8AnLc8TRv7DgtSvZjnz5W
 oF6So2A5SWZ7UmXKupd6TKtdyG3xtFAh+/MGVQ1RS9bCmnyhaIxJRiJwfftCBTBx
 IZePOsqlwl2dojM62BDlGS4CLRZve2VgiUEJaPINsdm/On3tQs9+iDbNY3cpvLQS
 P9u4po1TQPZnKG732vPAxEqdlq709kta7Fj5KIEvNjuWBBGKfypNP8BHKRvTLFlR
 kcbO03NzwSO6PZpmiUsx
 =gQZ6
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have aded a new capability for scatter-gathered memset
  using dmaengine APIs.  This is supported in xdmac & hdmac drivers

  We have added support for reusing descriptors for examples like video
  buffers etc.  Driver will follow

  The behaviour of descriptor ack has been clarified and documented

  New devices added are:
   - dma controller in sun[457]i SoCs
   - lpc18xx dmamux
   - ZTE ZX296702 dma controller
   - Analog Devices AXI-DMAC DMA controller
   - eDMA support for dma-crossbar
   - imx6sx support in imx-sdma driver
   - imx-sdma device to device support

  Other:
   - jz4780 fixes
   - ioatdma large refactor and cleanup for removal of ioat v1 and v2
     which is deprecated and fixes
   - ACPI support in X-Gene DMA engine driver
   - ipu irq fixes
   - mvxor fixes
   - minor fixes spread thru drivers"

[ The Kconfig and Makefile entries got re-sorted alphabetically, and I
  handled the conflict with the new Intel integrated IDMA driver by
  slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in
  order to keep the Intel entries together.  I think it might be a good
  idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make
  the sorting be a true sort, not this mismash.

  Also, this merge disables the COMPILE_TEST for the sun4i DMA
  controller, because it does not compile cleanly at all.     - Linus ]

* tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
  dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs
  dmaengine :ipu: change ipu_irq_handler() to remove compile warning
  dmaengine: ioatdma: Fix variable array length
  dmaengine: ioatdma: fix sparse "error" with prep lock
  dmaengine: hdmac: Add memset capabilities
  dmaengine: sort the sh Makefile
  dmaengine: sort the sh Kconfig
  dmaengine: sort the dw Kconfig
  dmaengine: sort the Kconfig
  dmaengine: sort the makefile
  drivers/dma: make mv_xor.c driver explicitly non-modular
  dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller
  devicetree: Add bindings documentation for Analog Devices AXI-DMAC
  dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests
  dmaengine: ioatdma: fix coccinelle warning
  dmaengine: ioatdma: fix zero day warning on incompatible pointer type
  dmaengine: tegra-apb: Simplify locking for device using global pause
  dmaengine: tegra-apb: Remove unnecessary return statements and variables
  dmaengine: tegra-apb: Avoid unnecessary channel base address calculation
  dmaengine: tegra-apb: Remove unused variables
  ...
2015-09-04 11:10:18 -07:00
Vinod Koul
6c310c46ef dmaengine: sort the dw Kconfig
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 13:58:18 +05:30
Viresh Kumar
da89947b47 Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Linus Torvalds
d6a4c0e5d3 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...
2015-04-24 09:49:37 -07:00
Vinod Koul
cdde0e61cf dmaengine: dw: don't prompt for DW_DMAC_CORE
DW_DMAC_CORE is slected by PCI or Platform driver, so this symbol shouldn't
be user selectable, so remove the prompt

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-22 12:24:13 +05:30
Jarkko Nikula
b26072276f dmaengine: dw: Make error prints unique. Part #2
The same error message is printed from different switch cases. Since both of
these jump into same error label we can move error print there and add a DMA
direction in order to make it easier to grep error from sources.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:11:06 +05:30
Jarkko Nikula
550da64bc8 dmaengine: dw: Make error prints unique. Part #1
The same error message is printed from different functions. Add a function
name to error message in order to make it easier to grep error from sources.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:10:51 +05:30
Andy Shevchenko
a104a45ba7 dmaengine: dw: append MODULE_ALIAS for platform driver
The commit 9cade1a46c (dma: dw: split driver to library part and platform
code) introduced a separate platform driver but missed to add a
MODULE_ALIAS("platform:dw_dmac"); to that module.

The patch adds this to get driver loaded automatically if platform device is
registered.

Reported-by: "Blin, Jerome" <jerome.blin@intel.com>
Fixes: 9cade1a46c (dma: dw: split driver to library part and platform code)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:07:03 +05:30
Jie Yang
94b3eed7b8 dmaengine: dw: don't handle interrupt when dmaengine is not used
When dma controller is not used by any user and set off,
we should disble interrupt handler, at least the interrupt
reset part, for some subsystem, e.g. ADSP, may use the
dma in its own logic, here reset the interrupt may make
this subsystem work abnormally.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 14:07:48 +05:30
Linus Torvalds
ce1d3fde87 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...
2015-02-18 08:49:20 -08:00
Andy Shevchenko
d8ded50f8b dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
Instead of using magic number in the code the patch provides
DW_DMA_MAX_NR_MASTERS constant.

While here, restrict the reading of data width array by amount of the actual
number of AHB masters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:39:44 -08:00
Andy Shevchenko
029a40e97d dmaengine: dw: provide DMA capabilities
The new DMAEngine requirement is to provide what the DMA controller can do,
such as directions, bus widths, and residue granularity. The patch sets those
properties for the DesignWare DMA controller driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13 23:46:00 +05:30
Andy Shevchenko
6acf3998d2 dmaengine: dw: balance PM runtime calls
In case of PCI driver we will get a warning:
	dw_dmac_pci 0000:00:18.0: Unbalanced pm_runtime_enable!
	dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels

This happens due to pm_runtime_enable() call from the driver when PM runtime is
enabled by core.

This patch moves that call to the platform driver where it might make sense.

Fixes: bb32baf76e (dmaengine: dw: enable runtime PM)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13 23:07:58 +05:30
Vinod Koul
295d3e10e6 dmaengine: dw: update the driver comments
driver comment refers to DMA_SLAVE_CONFIG which needs to be updated to
.device_config

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 20:26:45 +05:30
Maxime Ripard
a4b0d348f6 dmaengine: dw: Split device_control
Split the device_control callback of the DesignWare DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 12:28:58 +05:30
Andy Shevchenko
bb32baf76e dmaengine: dw: enable runtime PM
On runtime PM aware platforms the DMA have to manage its own power state. This
patch enables runtime PM support and applies necessary calls wherever it's
needed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-11 23:44:19 +01:00
Andy Shevchenko
2a52f6e49e dmaengine: dw: export probe()/remove() and Co to users
The driver library functions can be used directly by the compound devices such
as ADSP or serial driver where DesignWare DMA IP is privately attached to the
main hardware.

Instead of creating a new platform device leaf they may call dw_dma_probe()
with given struct dw_dma_chip directly and make sure that the main device is
DMA capable.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15 20:31:05 +05:30
Andy Shevchenko
99d9bf4ed2 dmaengine: dw: enable and disable controller when needed
Enable controller automatically whenever first user requires for a channel and
disable it when the last user gone.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15 20:31:05 +05:30
Andy Shevchenko
2540f74b18 dmaengine: dw: always export dw_dma_{en,dis}able
Instead of conditional exporing of dw_dma_suspend() / dw_dma_resume() let's
export dw_dma_disable() / dw_dma_enable(). Since dw_dma_shutdown() repeats
dw_dma_disable() we may safely remove it at all.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15 20:31:04 +05:30
Andy Shevchenko
7a83c04543 dmaengine: dw: introduce dw_dma_on() helper
As an opposite to dw_dma_off() let's introduce dw_dma_on() helper. It will be
useful later as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15 20:31:04 +05:30
Andy Shevchenko
3d588f83e4 dmaengine: dw: split dma-dw.h to platform and private parts
The introduced include/linux/dma/dw.h is going to contain the private
extensions and structures which are shared for dw_dmac users in the kernel.
Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data
types and definitions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15 20:31:04 +05:30
Andy Shevchenko
46e8c83c83 dmaengine: dw: move private definitions to regs.h
Since we don't allow user to set registers directly through private slave
configuration we may move definitions to the regs.h because they are not used
anywhere except core.c part.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15 20:31:04 +05:30
Andy Shevchenko
b279c4922e dmaengine: dw: add PCI IDs for Braswell DMAs
Braswell SoC has two DMA controllers for LPSS. This patch adds them to
supported list in the PCI driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:13 +05:30
Andy Shevchenko
a15636e83e dmaengine: dw: move clock operations to platform.c
On BayTrail platform DMA is not functional in the PCI mode, whereby it always
failed and exit at the point when it tries to get a clock. It causes the PCI
mode probe to exit with the error message:
	dw_dmac_pci: probe of 0000:00:1e.0 failed with error -2

This patch moves clock operations to where it belongs to. Thus, the clock is
provided only in ACPI / non-PCI cases.

Reported-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:13 +05:30
Andy Shevchenko
4d130de20c dmaengine: dw: introduce generic filter function
The introduced filter function would be reused in the ACPI and DT cases since
in those cases we have to apply mandatory data to the requested channel. Thus,
patch moves platform driver to use it in that case.

The function unlikely can't be used by users of the driver due to an implicit
dependency to the dw_dmac_core module.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:13 +05:30
Andy Shevchenko
8950052029 dmaengine: dw: apply both HS interfaces and remove slave_id usage
Instead of one request line member let's use both source and destination ones.
Usually we have no such hardware except Atmel MMC controller found on AVR32
platform (see arch/avr32/mach-at32ap/at32ap700x.c and
drivers/mmc/host/atmel-mci.c).

This patch removes slave_id usage since it'll be removed from the generic
structure in later. This breaks the non-ACPI / non-DT cases for the users of
the driver, i.e. SPI and HSUART. However, these cases mean only PCI enumerated
devices for now, which is anyway broken (considering more than one DMA
controller in the system) and this patch series is intended to fix that
eventually.

The ACPI and DT cases shall be aware of the channel direction when setting
request lines, but this is a minor problem that would be addressed in future.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:13 +05:30
Andy Shevchenko
7e1e2f27c5 dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces
Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO
strict user to provide handshake interfaces explicitly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:12 +05:30
Andy Shevchenko
3d598f47e8 dmaengine: dw: move dw_dmac.h to where it belongs to
There is a common storage for platform data related structures and definitions
inside kernel source tree. The patch moves file from include/linux to
include/linux/platform_data and renames it acoordingly. The users are also
updated.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[For the arch/avr32/.* and .*sound/atmel.*]
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 11:48:12 +05:30
Andy Shevchenko
dd8ecfcac6 dmaengine: dw: don't perform DMA when dmaengine_submit is called
Accordingly to discussion [1] and followed up documentation the DMA controller
driver shouldn't start any DMA operations when dmaengine_submit() is called.

This patch fixes the workflow in dw_dmac driver to follow the documentation.

[1] http://www.spinics.net/lists/arm-kernel/msg125987.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:14:30 +05:30
Andy Shevchenko
cba15617c3 dmaengine: dw: add debug message to dwc_dostart_first_queued
It would be useful to know when the first descriptor in the queue is started
along with its cookie.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:14:29 +05:30
Andy Shevchenko
e7637c6c03 dmaengine: dw: introduce dwc_dostart_first_queued() helper
We have a duplicate code which starts first descriptor in the queue. Let's make
this as a separate helper that can be used in future as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:14:28 +05:30
Vinod Koul
3c814be971 Merge branch 'topic/dw' into for-linus 2014-06-09 21:55:40 +05:30
Andy Shevchenko
1222934e54 dmaengine: dw: check return code of dma_async_device_register()
dma_async_device_register() may return non-zero error code. In such case we
have to follow error path.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-22 15:37:25 +05:30
Andy Shevchenko
8be4f523b4 dmaengine: dw: fix regression in dw_probe() function
The commit dbde5c29 "dw_dmac: use devm_* functions to simplify code" turns
probe function to use devm_* helpers and simultaneously brings a regression.

We have to 1) call clk_disable_unprepare() on error path, and 2) check error
code of clk_enable_prepare(). First part was done in the original code, second
one is an update.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-22 15:37:24 +05:30
Andy Shevchenko
d2f78e95e4 dmaengine: dw: enable clock before access
hclk signal is a bus clock. So, it means we have to have it enabled during
access to the DMA controller. This patch makes sure that we enable clock before
access to the device, though it currently works on Intel hardware.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-22 15:37:24 +05:30
Jingoo Han
7587821d3d dma: remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is deprecated.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-21 11:16:18 +05:30
Andy Shevchenko
97977f7576 dmaengine: dw: went back to plain {request,free}_irq() calls
The commit dbde5c29 "dw_dmac: use devm_* functions to simplify code" turns
probe function to use devm_* helpers and simultaneously brings a regression. We
need to ensure irq is disabled, followed by ensuring that don't schedule any
more tasklets and then its safe to use tasklet_kill().

The free_irq() will ensure that the irq is disabled and also wait till all
scheduled interrupts are executed by invoking synchronize_irq(). So we need to
only do tasklet_kill() after invoking free_irq().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07 15:34:45 +05:30
Andy Shevchenko
c31b6ae1b4 dmaengine: dw: convert to use SET_LATE_SYSTEM_SLEEP_PM_OPS
The commit 4501fe61 "dma: dw: Add suspend and resume handling for PCI mode
DW_DMAC." introduces system power management callbacks. Regarding to commit
f78c4cff "PM / Sleep: Add macro to define common late/early system PM
callbacks" we have nice macro to setup dev_pm_ops structure. This patch
converts a driver to use the macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07 11:44:06 +05:30
Andy Shevchenko
067bd4fdfa dmaengine: dw: move PM to suspend_late / resume_early stages
There is no need to use *_noirq version of suspend and resume PM callbacks. The
suspend_late / resume_early suit better (it was discussed in [1]) and in future
could be used for runtime PM support.

[1] http://www.spinics.net/lists/kernel/msg1650974.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07 11:44:06 +05:30
Chew, Chiau Ee
4501fe61b2 dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
This is to disable/enable DW_DMAC hw during late suspend/early resume.
Since DMA is providing service to other clients (eg: SPI, HSUART),
we need to ensure DMA suspends after the clients and resume
before the clients are active.

Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-26 11:52:03 +05:30
Andy Shevchenko
000871ce03 dma: dw: allocate memory in two stages in probe
This makes the probe() function a little bit clearer.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-26 11:44:27 +05:30
Andy Shevchenko
dd5720b300 dma: dw: remove leftovers in the comment blocks
There is couple of leftovers in the comment blocks. This patch modifies the
comments accordingly.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-17 14:16:54 +05:30
Andy Shevchenko
24066813d5 dma: dw: add a PCI ID for Intel Haswell SoC
In case of PCI mode the DMA controller has a specific ID. Put this ID to the
list of supported.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-11 23:34:32 +05:30
Andy Shevchenko
5a87f0e618 dma: dw: use %pad instead of casting dma_addr_t
Since we have nice helper to print dma_addr_t values by reference we may use it
instead of explicit casting to a longest type.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20 13:56:37 +05:30
Andy Shevchenko
fc61f6b4f3 dma: dw: join split up messages
The joined messages are better to grep when debugging.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20 13:56:37 +05:30
Andy Shevchenko
1d566f11d0 dma: dw: fix style of multiline comment
Simple fix a style of the multiline comment.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20 13:56:37 +05:30
Linus Torvalds
e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
Vinod Koul
df12a3178d Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan

1/ Bartlomiej and Dan finalized a rework of the dma address unmap
   implementation.

2/ In the course of testing 1/ a collection of enhancements to dmatest
   fell out.  Notably basic performance statistics, and fixed / enhanced
   test control through new module parameters 'run', 'wait', 'noverify',
   and 'verbose'.  Thanks to Andriy and Linus for their review.

3/ Testing the raid related corner cases of 1/ triggered bugs in the
   recently added 16-source operation support in the ioatdma driver.

4/ Some minor fixes / cleanups to mv_xor and ioatdma.

Conflicts:
	drivers/dma/dmatest.c

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-16 12:02:36 +05:30
Bartlomiej Zolnierkiewicz
54f8d501e8 dmaengine: remove DMA unmap from drivers
Remove support for DMA unmapping from drivers as it is no longer
needed (DMA core code is now handling it).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Dan Williams
d38a8c622a dmaengine: prepare for generic 'unmap' data
Add a hook for a common dma unmap implementation to enable removal of
the per driver custom unmap code.  (A reworked version of Bartlomiej
Zolnierkiewicz's patches to remove the custom callbacks and the size
increase of dma_async_tx_descriptor for drivers that don't care about
raid).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: prepare pl330 driver for adding missing unmap while at it]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13 16:25:06 -08:00
Russell King
24353b8bb4 DMA-API: dma: dw_dmac.c: convert to use dma_coerce_mask_and_coherent()
This code sequence:
	if (!pdev->dev.dma_mask) {
		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
	}
bypasses the architectures check on the DMA mask.  It can be replaced
with dma_coerce_mask_and_coherent(), avoiding the direct initialization
of this mask.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-31 14:48:51 +00:00
Vinod Koul
2c40410b87 dmaengine: dw: use DMA_COMPLETE for dma completion status
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25 11:16:00 +05:30
Martin Schwidefsky
0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Andy Shevchenko
effd5cf6fe dma: dw: return DMA_PAUSED only if cookie status is DMA_IN_PROGRESS
To obey a usual practice let's return DMA_PAUSED status only if
dma_cookie_status returned DMA_IN_PROGRESS.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05 09:32:26 +05:30
Andy Shevchenko
12381dc0c7 dma: dw: return DMA_SUCCESS immediately from device_tx_status()
There is no point to go throught the rest of the function if first call to
dma_cookie_status() returned DMA_SUCCESS.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05 09:32:26 +05:30
Andy Shevchenko
3783cef876 dma: dw: allow shared interrupts
In the PC world is quite possible that devices are sharing the same interrupt
line. The patch prepares dw_dmac driver to such cases.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05 09:32:26 +05:30
Andy Shevchenko
78f3c9d2e0 dma: dw: improve comparison with ~0
In general ~0 does not fit some integer types. Let's do a helper to make a
comparison with that constant properly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05 09:32:26 +05:30
Andy Shevchenko
be480dcbb5 dma: dw: append MODULE_DEVICE_TABLE for ACPI case
In rare cases (mostly for the testing purposes) the dw_dmac driver might be
compiled as a module as well as the other LPSS device drivers (I2C, SPI,
HSUART). When udev handles the event of the devices appearing the dw_dmac
module is missing. This patch will fix that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05 09:32:26 +05:30
Vinod Koul
e368b510c0 dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05 11:40:46 +05:30
Andy Shevchenko
fed42c198b dma: dw: add PCI part of the driver
This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Intel Medfield.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05 11:40:45 +05:30
Andy Shevchenko
9cade1a46c dma: dw: split driver to library part and platform code
To simplify the driver development let's split driver to library and platform
code parts. It helps us to add PCI driver in future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[Fixed compile error and few checkpatch issues]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05 11:40:44 +05:30
Andy Shevchenko
61a7649620 dma: move dw_dmac driver to an own directory
The dw_dmac driver is going to be split into multiple files. To make this more
convenient move it to an own directory.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05 11:40:43 +05:30