Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.
The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.
So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).
But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.
[1] https://www.rfc-editor.org/rfc/rfc1122#page-101
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The walk implementation of most tc cls modules is basically the same.
That is, the values of count and skip are checked first. If count is
greater than or equal to skip, the registered fn function is executed.
Otherwise, increase the value of count. So we can reconstruct them.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're seeing the following new warnings on netdev/build_32bit and
netdev/build_allmodconfig_warn CI jobs:
../net/core/filter.c:8608:1: warning: symbol
'nf_conn_btf_access_lock' was not declared. Should it be static?
../net/core/filter.c:8611:5: warning: symbol 'nfct_bsa' was not
declared. Should it be static?
Fix by ensuring extern declaration is present while compiling filter.o.
Fixes: 864b656f82 ("bpf: Add support for writing to nf_conn:mark")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/2bd2e0283df36d8a4119605878edb1838d144174.1663683114.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The more sockets we have in the hash table, the longer we spend looking
up the socket. While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.
The root cause might be a single workload that consumes much more
resources than the others. It often happens on a cloud service where
different workloads share the same computing resource.
On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.
thash_entries sockets length Gbps
524288 1 1 50.7
24Mi 48 45.1
It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.
thash_entries sockets length Gbps
131072 1 1 50.7
1Mi 8 49.9
2Mi 16 48.9
4Mi 32 47.3
8Mi 64 44.6
16Mi 128 40.6
24Mi 192 36.3
32Mi 256 32.5
40Mi 320 27.0
48Mi 384 25.0
To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.
With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours. In addition, we can reduce lock contention.
We can control the ehash size by a new sysctl knob. However, depending
on workloads, it will require very sensitive tuning, so we disable the
feature by default (net.ipv4.tcp_child_ehash_entries == 0). Moreover,
we can fall back to using the global ehash in case we fail to allocate
enough memory for a new ehash. The maximum size is 16Mi, which is large
enough that even if we have 48Mi sockets, the average list length is 3,
and regression would be less than 1%.
We can check the current ehash size by another read-only sysctl knob,
net.ipv4.tcp_ehash_entries. A negative value means the netns shares
the global ehash (per-netns ehash is disabled or failed to allocate
memory).
# dmesg | cut -d ' ' -f 5- | grep "established hash"
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
# sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 524288 # can be changed by thash_entries
# sysctl net.ipv4.tcp_child_ehash_entries
net.ipv4.tcp_child_ehash_entries = 0 # disabled by default
# ip netns add test1
# ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = -524288 # share the global ehash
# sysctl -w net.ipv4.tcp_child_ehash_entries=100
net.ipv4.tcp_child_ehash_entries = 100
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 128 # own a per-netns ehash with 2^n buckets
When more than two processes in the same netns create per-netns ehash
concurrently with different sizes, we need to guarantee the size in
one of the following ways:
1) Share the global ehash and create per-netns ehash
First, unshare() with tcp_child_ehash_entries==0. It creates dedicated
netns sysctl knobs where we can safely change tcp_child_ehash_entries
and clone()/unshare() to create a per-netns ehash.
2) Control write on sysctl by BPF
We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on
sysctl knobs.
Note that the global ehash allocated at the boot time is spread over
available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate
pages for each per-netns ehash depending on the current process's NUMA
policy. By default, the allocation is done in the local node only, so
the per-netns hash table could fully reside on a random node. Thus,
depending on the NUMA policy the netns is created with and the CPU the
current thread is running on, we could see some performance differences
for highly optimised networking applications.
Note also that the default values of two sysctl knobs depend on the ehash
size and should be tuned carefully:
tcp_max_tw_buckets : tcp_child_ehash_entries / 2
tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128)
As a bonus, we can dismantle netns faster. Currently, while destroying
netns, we call inet_twsk_purge(), which walks through the global ehash.
It can be potentially big because it can have many sockets other than
TIME_WAIT in all netns. Splitting ehash changes that situation, where
it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets
in each netns.
With regard to this, we do not free the per-netns ehash in inet_twsk_kill()
to avoid UAF while iterating the per-netns ehash in inet_twsk_purge().
Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to
keep it protocol-family-independent.
In the future, we could optimise ehash lookup/iteration further by removing
netns comparison for the per-netns ehash.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While destroying netns, we call inet_twsk_purge() in tcp_sk_exit_batch()
and tcpv6_net_exit_batch() for AF_INET and AF_INET6. These commands
trigger the kernel to walk through the potentially big ehash twice even
though the netns has no TIME_WAIT sockets.
# ip netns add test
# ip netns del test
or
# unshare -n /bin/true >/dev/null
When tw_refcount is 1, we need not call inet_twsk_purge() at least
for the net. We can save such unneeded iterations if all netns in
net_exit_list have no TIME_WAIT sockets. This change eliminates
the tax by the additional unshare() described in the next patch to
guarantee the per-netns ehash size.
Tested:
# mount -t debugfs none /sys/kernel/debug/
# echo cleanup_net > /sys/kernel/debug/tracing/set_ftrace_filter
# echo inet_twsk_purge >> /sys/kernel/debug/tracing/set_ftrace_filter
# echo function > /sys/kernel/debug/tracing/current_tracer
# cat ./add_del_unshare.sh
for i in `seq 1 40`
do
(for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) &
done
wait;
# ./add_del_unshare.sh
Before the patch:
# cat /sys/kernel/debug/tracing/trace_pipe
kworker/u128:0-8 [031] ...1. 174.162765: cleanup_net <-process_one_work
kworker/u128:0-8 [031] ...1. 174.240796: inet_twsk_purge <-cleanup_net
kworker/u128:0-8 [032] ...1. 174.244759: inet_twsk_purge <-tcp_sk_exit_batch
kworker/u128:0-8 [034] ...1. 174.290861: cleanup_net <-process_one_work
kworker/u128:0-8 [039] ...1. 175.245027: inet_twsk_purge <-cleanup_net
kworker/u128:0-8 [046] ...1. 175.290541: inet_twsk_purge <-tcp_sk_exit_batch
kworker/u128:0-8 [037] ...1. 175.321046: cleanup_net <-process_one_work
kworker/u128:0-8 [024] ...1. 175.941633: inet_twsk_purge <-cleanup_net
kworker/u128:0-8 [025] ...1. 176.242539: inet_twsk_purge <-tcp_sk_exit_batch
After:
# cat /sys/kernel/debug/tracing/trace_pipe
kworker/u128:0-8 [038] ...1. 428.116174: cleanup_net <-process_one_work
kworker/u128:0-8 [038] ...1. 428.262532: cleanup_net <-process_one_work
kworker/u128:0-8 [030] ...1. 429.292645: cleanup_net <-process_one_work
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will soon introduce an optional per-netns ehash.
This means we cannot use the global sk->sk_prot->h.hashinfo
to fetch a TCP hashinfo.
Instead, set NULL to sk->sk_prot->h.hashinfo for TCP and get
a proper hashinfo from net->ipv4.tcp_death_row.hashinfo.
Note that we need not use sk->sk_prot->h.hashinfo if DCCP is
disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will soon introduce an optional per-netns ehash and access hash
tables via net->ipv4.tcp_death_row->hashinfo instead of &tcp_hashinfo
in most places.
It could harm the fast path because dereferences of two fields in net
and tcp_death_row might incur two extra cache line misses. To save one
dereference, let's place tcp_death_row back in netns_ipv4 and fetch
hashinfo via net->ipv4.tcp_death_row"."hashinfo.
Note tcp_death_row was initially placed in netns_ipv4, and commit
fbb8295248 ("tcp: allocate tcp_death_row outside of struct netns_ipv4")
changed it to a pointer so that we can fire TIME_WAIT timers after freeing
net. However, we don't do so after commit 04c494e68a ("Revert "tcp/dccp:
get rid of inet_twsk_purge()""), so we need not define tcp_death_row as a
pointer.
Also, we move refcount_dec_and_test(&tw_refcount) from tcp_sk_exit() to
tcp_sk_exit_batch() as a debug check.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 2 ways in which a DSA user port may become handled by 2 CPU
ports in a LAG:
(1) its current DSA master joins a LAG
ip link del bond0 && ip link add bond0 type bond mode 802.3ad
ip link set eno2 master bond0
When this happens, all user ports with "eno2" as DSA master get
automatically migrated to "bond0" as DSA master.
(2) it is explicitly configured as such by the user
# Before, the DSA master was eno3
ip link set swp0 type dsa master bond0
The design of this configuration is that the LAG device dynamically
becomes a DSA master through dsa_master_setup() when the first physical
DSA master becomes a LAG slave, and stops being so through
dsa_master_teardown() when the last physical DSA master leaves.
A LAG interface is considered as a valid DSA master only if it contains
existing DSA masters, and no other lower interfaces. Therefore, we
mainly rely on method (1) to enter this configuration.
Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when
it becomes a standalone DSA master again. But the LAG master also has a
dev->dsa_ptr, and this is actually duplicated from one of the physical
LAG slaves, and therefore needs to be balanced when LAG slaves come and
go.
To the switch driver, putting DSA masters in a LAG is seen as putting
their associated CPU ports in a LAG.
We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG,
by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drivers could refuse to offload a LAG configuration for a variety of
reasons, mainly having to do with its TX type. Additionally, since DSA
masters may now also be LAG interfaces, and this will translate into a
call to port_lag_join on the CPU ports, there may be extra restrictions
there. Propagate the netlink extack to this DSA method in order for
drivers to give a meaningful error message back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some DSA switches have multiple CPU ports, which can be used to improve
CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(),
sets up only the first one, leading to suboptimal use of hardware.
The desire is to not change the default configuration but to permit the
user to create a dynamic mapping between individual user ports and the
CPU port that they are served by, configurable through rtnetlink. It is
also intended to permit load balancing between CPU ports, and in that
case, the foreseen model is for the DSA master to be a bonding interface
whose lowers are the physical DSA masters.
To that end, we create a struct rtnl_link_ops for DSA user ports with
the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that
contains the ifindex of the newly desired DSA master.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a desire to support for DSA masters in a LAG.
That configuration is intended to work by simply enslaving the master to
a bonding/team device. But the physical DSA master (the LAG slave) still
has a dev->dsa_ptr, and that cpu_dp still corresponds to the physical
CPU port.
However, we would like to be able to retrieve the LAG that's the upper
of the physical DSA master. In preparation for that, introduce a helper
called dsa_port_get_master() that replaces all occurrences of the
dp->cpu_dp->master pattern. The distinction between LAG and non-LAG will
be made later within the helper itself.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow to offload L2TPv3 filters by adding flow_rule_match_l2tpv3.
Drivers can extract L2TPv3 specific fields from now on.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow to dissect L2TPv3 specific field which is:
- session ID (32 bits)
L2TPv3 might be transported over IP or over UDP,
this implementation is only about L2TPv3 over IP.
IP protocol carries L2TPv3 when ip_proto is
IPPROTO_L2TP (115).
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.
We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.
Also fixed in raw_bind, dgram_bind, dgram_connect.
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support direct writes to nf_conn:mark from TC and XDP prog types. This
is useful when applications want to store per-connection metadata. This
is also particularly useful for applications that run both bpf and
iptables/nftables because the latter can trivially access this metadata.
One example use case would be if a bpf prog is responsible for advanced
packet classification and iptables/nftables is later used for routing
due to pre-existing/legacy code.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/ebca06dea366e3e7e861c12f375a548cc4c61108.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recent changes breaks HCIGETDEVINFO since it changes the size of
hci_dev_info.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Each tc action module has a corresponding net_id, so put net_id directly
into the structure tc_action_ops.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
The following set contains changes for your *net-next* tree:
- make conntrack ignore packets that are delayed (containing
data already acked). The current behaviour to flag them as INVALID
causes more harm than good, let them pass so peer can send an
immediate ACK for the most recent sequence number.
- make conntrack recognize when both peers have sent 'invalid' FINs:
This helps cleaning out stale connections faster for those cases where
conntrack is no longer in sync with the actual connection state.
- Now that DECNET is gone, we don't need to reserve space for DECNET
related information.
- compact common 'find a free port number for the new inbound
connection' code and move it to a helper, then cap number of tries
the new helper will make until it gives up.
- replace various instances of strlcpy with strscpy, from Wolfram Sang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes breaks HCIGETDEVINFO since it changes the size of
hci_dev_info.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Almost all nat helpers reserve an expecation port the same way:
Try the port inidcated by the peer, then move to next port if that
port is already in use.
We can squash this into a helper.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:
$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
ip_defrag 14605 [021] 221.614303: skb:kfree_skb:
skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
reason:
The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.
Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit ec43908dd5
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.
Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.
After this commit, now the format of kfree_skb is like this:
$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:void * skbaddr; offset:8; size:8; signed:0;
field:void * location; offset:16; size:8; signed:0;
field:unsigned short protocol; offset:24; size:2; signed:0;
field:enum skb_drop_reason reason; offset:28; size:4; signed:0;
print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......
Fixes: ec43908dd5 ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move some MACsec infrastructure like defines and functions,
in order to avoid code duplication for future drivers which
implements MACsec offload.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current MACsec offload implementation, MACsec interfaces shares
the same MAC address by default.
Therefore, HW can't distinguish from which MACsec interface the traffic
originated from.
MACsec stack will use skb_metadata_dst to store the SCI value, which is
unique per Macsec interface, skb_metadat_dst will be used by the
offloading device driver to associate the SKB with the corresponding
offloaded interface (SCI).
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink allows to specify allowed ranges for integer types.
Unfortunately, nfnetlink passes integers in big endian, so the existing
NLA_POLICY_MAX() cannot be used.
At the moment, nfnetlink users, such as nf_tables, need to resort to
programmatic checking via helpers such as nft_parse_u32_check().
This is both cumbersome and error prone. This adds NLA_POLICY_MAX_BE
which adds range check support for BE16, BE32 and BE64 integers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771d ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This introduces a "Mesh UUID" and an Experimental Feature bit to the
hdev mask, and depending all underlying Mesh functionality on it.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The patch adds state bits, storage and HCI command chains for sending
and receiving Bluetooth Mesh advertising packets, and delivery to
requesting user space processes. It specifically creates 4 new MGMT
commands and 2 new MGMT events:
MGMT_OP_SET_MESH_RECEIVER - Sets passive scan parameters and a list of
AD Types which will trigger Mesh Packet Received events
MGMT_OP_MESH_READ_FEATURES - Returns information on how many outbound
Mesh packets can be simultaneously queued, and what the currently queued
handles are.
MGMT_OP_MESH_SEND - Command to queue a specific outbound Mesh packet,
with the number of times it should be sent, and the BD Addr to use.
Discrete advertisments are added to the ADV Instance list.
MGMT_OP_MESH_SEND_CANCEL - Command to cancel a prior outbound message
request.
MGMT_EV_MESH_DEVICE_FOUND - Event to deliver entire received Mesh
Advertisement packet, along with timing information.
MGMT_EV_MESH_PACKET_CMPLT - Event to indicate that an outbound packet is
no longer queued for delivery.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement an API function and debugfs file to switch
active links.
Also provide an async version of the API so drivers
can call it in arbitrary contexts, e.g. while in the
authorized callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add macros (and an exported function) to allow checking some
link RCU protected accesses that are happening in callbacks
from mac80211 and are thus under the correct lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a link_id parameter to ieee80211_nullfunc_get() to be
able to obtain a correctly addressed frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new API function ieee80211_find_sta_by_link_addrs()
that looks up the STA and link ID based on interface and
station link addresses.
We're going to use it for mac80211-hwsim to track on the
AP side which links are active.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to let the driver select active links and properly
make multi-link connections, as a first step isolate the
driver from inactive links, and set the active links to be
only the association link for client-side interfaces. For
AP side nothing changes since APs always have to have all
their links active.
To simplify things, update the for_each_sta_active_link()
API to include the appropriate vif pointer.
This also implies not allocating a chanctx for an inactive
link, which requires a few more changes.
Since we now no longer try to program multiple links to the
driver, remove the check in the MLME code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The SMPS power save mode needs to be per-link rather than being shared
for all links. As such, move it into struct ieee80211_link_sta.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch changes bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt(). It removes the duplicated code from
bpf_getsockopt(SOL_IPV6).
This also makes bpf_getsockopt(SOL_IPV6) supporting the same
set of optnames as in bpf_setsockopt(SOL_IPV6). In particular,
this adds IPV6_AUTOFLOWLABEL support to bpf_getsockopt(SOL_IPV6).
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_getsockopt
to the ipv6_bpf_stub.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002931.2896218-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes bpf_getsockopt(SOL_IP) to reuse
do_ip_getsockopt() and remove the duplicated code.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002925.2895416-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes bpf_getsockopt(SOL_TCP) to reuse
do_tcp_getsockopt(). It removes the duplicated code from
bpf_getsockopt(SOL_TCP).
Before this patch, there were some optnames available to
bpf_setsockopt(SOL_TCP) but missing in bpf_getsockopt(SOL_TCP).
For example, TCP_NODELAY, TCP_MAXSEG, TCP_KEEPIDLE, TCP_KEEPINTVL,
and a few more. It surprises users from time to time. This patch
automatically closes this gap without duplicating more code.
bpf_getsockopt(TCP_SAVED_SYN) does not free the saved_syn,
so it stays in sol_tcp_sockopt().
For string name value like TCP_CONGESTION, bpf expects it
is always null terminated, so sol_tcp_sockopt() decrements
optlen by one before calling do_tcp_getsockopt() and
the 'if (optlen < saved_optlen) memset(..,0,..);'
in __bpf_getsockopt() will always do a null termination.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002918.2894511-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes bpf_getsockopt(SOL_SOCKET) to reuse
sk_getsockopt(). It removes all duplicated code from
bpf_getsockopt(SOL_SOCKET).
Before this patch, there were some optnames available to
bpf_setsockopt(SOL_SOCKET) but missing in bpf_getsockopt(SOL_SOCKET).
It surprises users from time to time. For example, SO_REUSEADDR,
SO_KEEPALIVE, SO_RCVLOWAT, and SO_MAX_PACING_RATE. This patch
automatically closes this gap without duplicating more code.
The only exception is SO_BINDTODEVICE because it needs to acquire a
blocking lock. Thus, SO_BINDTODEVICE is not supported.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002912.2894040-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument . This patch also changes
do_ipv6_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt().
Note on the change in ip6_mc_msfget(). This function is to
return an array of sockaddr_storage in optval. This function
is shared between ipv6_get_msfilter() and compat_ipv6_get_msfilter().
However, the sockaddr_storage is stored at different offset of the
optval because of the difference between group_filter and
compat_group_filter. Thus, a new 'ss_offset' argument is
added to ip6_mc_msfget().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002853.2892532-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When CONFIG_IEEE802154_NL802154_EXPERIMENTAL is disabled,
NL802154_CMD_DEL_SEC_LEVEL is undefined and results in a compilation
error:
net/ieee802154/nl802154.c:2503:19: error: 'NL802154_CMD_DEL_SEC_LEVEL' undeclared here (not in a function); did you mean 'NL802154_CMD_SET_CCA_ED_LEVEL'?
2503 | .resv_start_op = NL802154_CMD_DEL_SEC_LEVEL + 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| NL802154_CMD_SET_CCA_ED_LEVEL
Unhide the experimental commands, having them defined in an enum
makes no difference.
Fixes: 9c5d03d362 ("genetlink: start to validate reserved header bytes")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20220902030620.2737091-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter: bug fixes for net
1. Fix IP address check in irc DCC conntrack helper, this should check
the opposite direction rather than the destination address of the
packets' direction, from David Leadbeater.
2. bridge netfilter needs to drop dst references, from Harsh Modi.
This was fine back in the day the code was originally written,
but nowadays various tunnels can pre-set metadata dsts on packets.
3. Remove nf_conntrack_helper sysctl and the modparam toggle, users
need to explicitily assign the helpers to use via nftables or
iptables. Conntrack helpers, by design, may be used to add dynamic
port redirections to internal machines, so its necessary to restrict
which hosts/peers are allowed to use them.
It was discovered that improper checking in the irc DCC helper makes
it possible to trigger the 'please do dynamic port forward'
from outside by embedding a 'DCC' in a PING request; if the client
echos that back a expectation/port forward gets added.
The auto-assign-for-everything mechanism has been in "please don't do this"
territory since 2012. From Pablo.
4. Fix a memory leak in the netdev hook error unwind path, also from Pablo.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_irc: Fix forged IP logic
netfilter: nf_tables: clean up hook list when offload flags check fails
netfilter: br_netfilter: Drop dst references before setting.
netfilter: remove nf_conntrack_helper sysctl and modparam toggles
====================
Link: https://lore.kernel.org/r/20220901071238.3044-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GW48
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20220901' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc fixes
Here are some fixes for AF_RXRPC:
(1) Fix the handling of ICMP/ICMP6 packets. This is a problem due to
rxrpc being switched to acting as a UDP tunnel, thereby allowing it to
steal the packets before they go through the UDP Rx queue. UDP
tunnels can't get ICMP/ICMP6 packets, however. This patch adds an
additional encap hook so that they can.
(2) Fix the encryption routines in rxkad to handle packets that have more
than three parts correctly. The problem is that ->nr_frags doesn't
count the initial fragment, so the sglist ends up too short.
(3) Fix a problem with destruction of the local endpoint potentially
getting repeated.
(4) Fix the calculation of the time at which to resend.
jiffies_to_usecs() gives microseconds, not nanoseconds.
(5) Fix AFS to work out when callback promises and locks expire based on
the time an op was issued rather than the time the first reply packet
arrives. We don't know how long the server took between calculating
the expiry interval and transmitting the reply.
(6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove rxrpc_get_reply_time() as that is no longer used now that the call
issue time is used instead of the reply time.
Signed-off-by: David Howells <dhowells@redhat.com>
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback. In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.
Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels. If the hook is set, then the tunnel driver will be able to
see ICMP packets. The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.
An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).
Changes
=======
ver #3)
- Fixed an uninitialised variable.
ver #2)
- Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Because per host rate limiting has been proven problematic (side channel
attacks can be based on it), per host rate limiting of challenge acks ideally
should be per netns and turned off by default.
This is a long due followup of following commits:
083ae30828 ("tcp: enable per-socket rate limiting of all 'challenge acks'")
f2b2c582e8 ("tcp: mitigate ACK loops for connections as tcp_sock")
75ff39ccc1 ("tcp: make challenge acks less predictable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable "other" in the struct red_stats is not used. Remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hci_abort_conn() is a wrapper around a number of DISCONNECT and
CREATE_CONN_CANCEL commands that was being invoked from hci_request
request queues, which are now deprecated. There are two versions:
hci_abort_conn() which can be invoked from the hci_event thread, and
hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__nf_ct_try_assign_helper() remains in place but it now requires a
template to configure the helper.
A toggle to disable automatic helper assignment was added by:
a900689264 ("netfilter: nf_ct_helper: allow to disable automatic helper assignment")
in 2012 to address the issues described in "Secure use of iptables and
connection tracking helpers". Automatic conntrack helper assignment was
disabled by:
3bb398d925 ("netfilter: nf_ct_helper: disable automatic helper assignment")
back in 2016.
This patch removes the sysctl and modparam toggles, users now have to
rely on explicit conntrack helper configuration via ruleset.
Update tools/testing/selftests/netfilter/nft_conntrack_helper.sh to
check that auto-assignment does not happen anymore.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Follow-up the removal of unused internal api of port params made by
commit 42ded61aa7 ("devlink: Delete not used port parameters APIs")
and stub the commands and add extack message to tell the user what is
going on.
If later on port params are needed, could be easily re-introduced,
but until then it is a dead code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220826082730.1399735-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Being able to check attribute presence and set extack
if not on one line is handy, add helpers.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow specifying the xfrm interface if_id and link as part of a route
metadata using the lwtunnel infrastructure.
This allows for example using a single xfrm interface in collect_md
mode as the target of multiple routes each specifying a different if_id.
With the appropriate changes to iproute2, considering an xfrm device
ipsec1 in collect_md mode one can for example add a route specifying
an if_id like so:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1
In which case traffic routed to the device via this route would use
if_id in the xfrm interface policy lookup.
Or in the context of vrf, one can also specify the "link" property:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1 link_dev eth15
Note: LWT_XFRM_LINK uses NLA_U32 similar to IFLA_XFRM_LINK even though
internally "link" is signed. This is consistent with other _LINK
attributes in other devices as well as in bpf and should not have an
effect as device indexes can't be negative.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM interfaces provide the association of various XFRM transformations
to a netdevice using an 'if_id' identifier common to both the XFRM data
structures (polcies, states) and the interface. The if_id is configured by
the controlling entity (usually the IKE daemon) and can be used by the
administrator to define logical relations between different connections.
For example, different connections can share the if_id identifier so
that they pass through the same interface, . However, currently it is
not possible for connections using a different if_id to use the same
interface while retaining the logical separation between them, without
using additional criteria such as skb marks or different traffic
selectors.
When having a large number of connections, it is useful to have a the
logical separation offered by the if_id identifier but use a single
network interface. Similar to the way collect_md mode is used in IP
tunnels.
This patch attempts to enable different configuration mechanisms - such
as ebpf programs, LWT encapsulations, and TC - to attach metadata
to skbs which would carry the if_id. This way a single xfrm interface in
collect_md mode can demux traffic based on this configuration on tx and
provide this metadata on rx.
The XFRM metadata is somewhat similar to ip tunnel metadata in that it
has an "id", and shares similar configuration entities (bpf, tc, ...),
however, it does not necessarily represent an IP tunnel or use other
ip tunnel information, and also has an optional "link" property which
can be used for affecting underlying routing decisions.
Additional xfrm related criteria may also be added in the future.
Therefore, a new metadata type is introduced, to be used in subsequent
patches in the xfrm interface and configuration entities.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Daniel borkmann says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 14 day(s) which contain
a total of 13 files changed, 61 insertions(+), 24 deletions(-).
The main changes are:
1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi.
2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger.
3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu.
4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui.
5) Fix range tracking for array poke descriptors, from Daniel Borkmann.
6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson.
7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian.
8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima.
9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The memory allocated by using kzallloc_node and kcalloc has been cleared.
Therefore, the structure members of the new qdisc are 0. So there's no
need to explicitly assign a value of 0.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmMInmcACgkQB8qZga/f
l8RKWw//bigvsgOiM+EnJ22+KzBIdI2FiGv0O7edO/RYjRNlv7C1hkNI6HwLVZTA
U458HhGY7Y7odujPQrm9cHuTyeQ5DOLX4y/JItW3U4jTnZjKZNbrLvg5BU/1zJC0
yAWZuGs0+Hy4JdzSii9KSwIWFf6yFWPLpRD20nYuauAcEkbTftphuGH3glshUpqP
N5ypDDRevJbvF6rGWHS8M0a5wcwPyyw1nDlyaytqn4IkNwhWxJO095tqls7QZkFh
oOZQNk0oMqmhZTQzyq3/sl9SvEe3Er/pD+iIGkfw2mq1tiUI4CYu92ADrxqeUFmb
s9KbLYppSFQxhISFqo7GdVIAg2WaZdrUsf2qXKoAWDl+n5iiug2GMDroW7CQw/cG
eFkNDcw5aRz1LYkxA7HkVBkXOBpH17bfAt8BI969mTWwEzuNCH+z9egaOKtyy7MV
6b8+BWNC56WK+dvTaFH1x4+xnY0KIOEKjvkDMVBuVNi/mp0Of3y/Vj+zy2LfntwQ
T+oJVC4TrkCvI2Lc2tLW+pQdoy61DjPHmVQwoM4jdTdOsL+a7aWgEql3kLJsdEP4
BEK1IcriPch3Q860PDG2Z5wRYw+bSf37Y6hOQgo2ARrIhAAPzMlvKwgdeipatnSk
5mWgVO6Y6Ejd/snAkgIdQyifkWmtwbPSUL6Mj5dtOJR+Q0QLzRw=
=J5Fc
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-08-26-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes berg says:
====================
Various updates:
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
hci_update_adv_data() is called from hci_event and hci_core due to
events from the controller. The prior function used the deprecated
hci_request method, and the new one uses hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This function has no dependencies on the deprecated hci_request
mechanism, so has been moved unchanged to hci_sync.c
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Advertising Instance expiration timer adv_instance_expire was
handled with the deprecated hci_request mechanism, rather than it's
replacement: hci_sync.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Limit the acceptance of component name passed to cmd_flash_update() to
match one of the versions returned by info_get(), marked by version type.
This makes things clearer and enforces 1:1 mapping between exposed
version and accepted flash component.
Check VERSION_TYPE_COMPONENT version type during cmd_flash_update()
execution by calling info_get() with different "req" context.
That causes info_get() to lookup the component name instead of
filling-up the netlink message.
Remove "UPDATE_COMPONENT" flag which becomes used.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever the driver is called by his info_get() op, it may put multiple
version names and values to the netlink message. Extend by additional
helper devlink_info_version_running/stored_put_ext() that allows to
specify a version type that indicates when particular version name
represents a flash component.
This is going to be used in follow-up patch calling info_get() during
flash update command checking if version with this the version type
exists.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qdisc_reset() is clearing qdisc->q.qlen and qdisc->qstats.backlog
_after_ calling qdisc->ops->reset. There is no need to clear them
again in the specific reset function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220824005231.345727-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To helper drivers if they e.g. have a lookup of the link_sta
pointer, add the link ID to the link_sta structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, when the address translation from link to MLD is done
in fw/hw, it is necessary to be able to have some information
on the link on which the frame has been received. Extend the
rx API to include link_id and a valid flag in ieee80211_rx_status.
Also make chanes to mac80211 rx APIs to make use of the reported
link_id after sanity checks.
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://lore.kernel.org/r/20220817104213.2531-2-quic_vthiagar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement key installation and lookup (on TX and RX)
for MLO, so we can use multiple GTKs/IGTKs/BIGTKs.
Co-authored-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Tx queue parameters are per link, so add the link ID
from nl80211 parameters to the API.
While at it, lock the wdev when calling into the driver
so it (and we) can check the link ID appropriately.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce a simple helper function to replace a common pattern.
When accessing the GRO header, we fetch the pointer from frag0,
then test its validity and fetch it from the skb when necessary.
This leads to the pattern
skb_gro_header_fast -> skb_gro_header_hard -> skb_gro_header_slow
recurring many times throughout GRO code.
This patch replaces these patterns with a single inlined function
call, improving code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220823071034.GA56142@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current bind hashtable (bhash) is hashed by port only.
In the socket bind path, we have to check for bind conflicts by
traversing the specified port's inet_bind_bucket while holding the
hashbucket's spinlock (see inet_csk_get_port() and
inet_csk_bind_conflict()). In instances where there are tons of
sockets hashed to the same port at different addresses, the bind
conflict check is time-intensive and can cause softirq cpu lockups,
as well as stops new tcp connections since __inet_inherit_port()
also contests for the spinlock.
This patch adds a second bind table, bhash2, that hashes by
port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6).
Searching the bhash2 table leads to significantly faster conflict
resolution and less time holding the hashbucket spinlock.
Please note a few things:
* There can be the case where the a socket's address changes after it
has been bound. There are two cases where this happens:
1) The case where there is a bind() call on INADDR_ANY (ipv4) or
IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will
assign the socket an address when it handles the connect()
2) In inet_sk_reselect_saddr(), which is called when rebuilding the
sk header and a few pre-conditions are met (eg rerouting fails).
In these two cases, we need to update the bhash2 table by removing the
entry for the old address, and add a new entry reflecting the updated
address.
* The bhash2 table must have its own lock, even though concurrent
accesses on the same port are protected by the bhash lock. Bhash2 must
have its own lock to protect against cases where sockets on different
ports hash to different bhash hashbuckets but to the same bhash2
hashbucket.
This brings up a few stipulations:
1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock
will always be acquired after the bhash lock and released before the
bhash lock is released.
2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always
acquired+released before another bhash2 lock is acquired+released.
* The bhash table cannot be superseded by the bhash2 table because for
bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket
bound to that port must be checked for a potential conflict. The bhash
table is the only source of port->socket associations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix crash with malformed ebtables blob which do not provide all
entry points, from Florian Westphal.
2) Fix possible TCP connection clogging up with default 5-days
timeout in conntrack, from Florian.
3) Fix crash in nf_tables tproxy with unsupported chains, also from Florian.
4) Do not allow to update implicit chains.
5) Make table handle allocation per-netns to fix data race.
6) Do not truncated payload length and offset, and checksum offset.
Instead report EINVAl.
7) Enable chain stats update via static key iff no error occurs.
8) Restrict osf expression to ip, ip6 and inet families.
9) Restrict tunnel expression to netdev family.
10) Fix crash when trying to bind again an already bound chain.
11) Flowtable garbage collector might leave behind pending work to
delete entries. This patch comes with a previous preparation patch
as dependency.
12) Allow net.netfilter.nf_conntrack_frag6_high_thresh to be lowered,
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_defrag_ipv6: allow nf_conntrack_frag6_high_thresh increases
netfilter: flowtable: fix stuck flows on cleanup due to pending work
netfilter: flowtable: add function to invoke garbage collection immediately
netfilter: nf_tables: disallow binding to already bound chain
netfilter: nft_tunnel: restrict it to netdev family
netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families
netfilter: nf_tables: do not leave chain stats enabled on error
netfilter: nft_payload: do not truncate csum_offset and csum_type
netfilter: nft_payload: report ERANGE for too long offset and length
netfilter: nf_tables: make table handle allocation per-netns friendly
netfilter: nf_tables: disallow updates of implicit chain
netfilter: nft_tproxy: restrict to prerouting hook
netfilter: conntrack: work around exceeded receive window
netfilter: ebtables: reject blobs that don't provide all entry points
====================
Link: https://lore.kernel.org/r/20220824220330.64283-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reading gro_normal_batch, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 323ebb61e3 ("net: use listified RX for handling GRO_NORMAL skbs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_net_busy_poll, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 0602129286 ("net: add low latency socket poll")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@nvidia.com>
Tested-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
More logic will be added to dsa_tree_setup_master() and
dsa_tree_teardown_master() in upcoming changes.
Reduce the indentation by one level in these functions by introducing
and using a dedicated iterator for CPU ports of a tree.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds 'vsock_data_ready()' which must be called by transport to kick
sleeping data readers. It checks for SO_RCVLOWAT value before waking
user, thus preventing spurious wake ups. Based on 'tcp_data_ready()' logic.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds transport specific callback for SO_RCVLOWAT, because in some
transports it may be difficult to know current available number of bytes
ready to read. Thus, when SO_RCVLOWAT is set, transport may reject it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The value is only ever set once in bond_3ad_initialize and only ever
read otherwise. There seems to be no reason to set the variable via
bond_3ad_initialize when setting the global variable will do. Change
ad_ticks_per_sec to a const to enforce its read-only usage.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose MACSEC_SALT_LEN definition to user space to be
used in various user space applications such as iproute.
Iproute will use this as part of adding macsec extended
packet number support.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20220818153229.4721-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IPV6)
and reuses the implementation in do_ipv6_setsockopt().
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_setsockopt
to the ipv6_bpf_stub.
The current bpf_setsockopt(IPV6_TCLASS) does not take the
INET_ECN_MASK into the account for tcp. The
do_ipv6_setsockopt(IPV6_TCLASS) will handle it correctly.
The existing optname white-list is refactored into a new
function sol_ipv6_setsockopt().
After this last SOL_IPV6 dup code removal, the __bpf_setsockopt()
is simplified enough that the extra "{ }" around the if statement
can be removed.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061834.4181198-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IP)
and reuses the implementation in do_ip_setsockopt().
The existing optname white-list is refactored into a new
function sol_ip_setsockopt().
NOTE,
the current bpf_setsockopt(IP_TOS) is quite different from the
the do_ip_setsockopt(IP_TOS). For example, it does not take
the INET_ECN_MASK into the account for tcp and also does not adjust
sk->sk_priority. It looks like the current bpf_setsockopt(IP_TOS)
was referencing the IPV6_TCLASS implementation instead of IP_TOS.
This patch tries to rectify that by using the do_ip_setsockopt(IP_TOS).
While this is a behavior change, the do_ip_setsockopt(IP_TOS) behavior
is arguably what the user is expecting. At least, the INET_ECN_MASK bits
should be masked out for tcp.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061826.4180990-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the prep work in the previous patches,
this patch removes all the dup code from bpf_setsockopt(SOL_TCP)
and reuses the do_tcp_setsockopt().
The existing optname white-list is refactored into a new
function sol_tcp_setsockopt(). The sol_tcp_setsockopt()
also calls the bpf_sol_tcp_setsockopt() to handle
the TCP_BPF_XXX specific optnames.
bpf_setsockopt(TCP_SAVE_SYN) now also allows a value 2 to
save the eth header also and it comes for free from
do_tcp_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061819.4180146-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
