core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU: simplified VBIF configuration
- cleanup CTL interfaces
- DSI: removed unused msm_display_dsc_config struct
- switch regulator calls to new API
- switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- Improve error and edge conditions handling
- Convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- Add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support
-----BEGIN PGP SIGNATURE-----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=u/MJ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
EDID 1.4 introduced some extra flags in the range
descriptor to support min/max h/vfreq >= 255. Consult them
to correctly parse the vfreq limits.
Note that some combinations of the flags are documented
as "reserved" (as are some other values in the descriptor)
but explicitly checking for those doesn't seem particularly
worthwile since we end up with bogus results whether we
decode them or not.
v2: Increase the storage to u16 to make it work (Jani)
Note the "reserved" values situation (Jani)
v3: Document the EDID version number in the defines
Drop some bogus (u8) casts
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6519
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6484
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826213501.31490-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Split luminance min/max calculation using static hdr metadata from
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:update_connector_ext_caps
into drm/drm_edid.c and use it during edid parsing. Calculated range is
stored into connector->display_info->luminance_range.
Add new data structure (drm_luminance_range_inf) to store luminance range
calculated using data from EDID's static hdr metadata block. Add this new
struct as a part of drm_display_info struct.
v3: Squashed adding drm_luminance_range_info patch here
v2: Calculate range during edid parsing
Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-2-jouni.hogander@intel.com
Unlike other DRM entities, there's no helper to create a DRM-managed
initialisation of a connector.
Let's create an helper to initialise a connector that would be passed as an
argument, and handle the cleanup through a DRM-managed action.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-10-maxime@cerno.tech
Add functions drm_edid_override_set() and drm_edid_override_reset() to
support "edid_override" connector debugfs, and to hide the details about
it in drm_edid.c. No functional changes at this time.
Also note in the connector.override_edid flag kernel-doc that this is
only supposed to be modified by the code doing debugfs EDID override
handling. Currently, it is still being modified by amdgpu in
create_eml_sink() and handle_edid_mgmt() for reasons unknown. This was
added in commit 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
and later moved to amdgpu_dm.c in commit e7b07ceef2 ("drm/amd/display:
Merge amdgpu_dm_types and amdgpu_dm").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f6b4001630cafac5f44aa5913429ac9979743d2.1656494768.git.jani.nikula@intel.com
Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().
The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.
Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_orientation_from_panel() before
drm_dev_register().
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: removed space before tab]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-2-hsinyi@chromium.org
Move DRM's HMDI helpers into the display/ subdirectoy and add it
to DRM's display helpers. Update all affected drivers. No functional
changes.
The HDMI helpers were implemented in the EDID and connector code, but
are actually unrelated. With the move to the display-helper library, we
can remove the dependency on drm_edid.{c,h} in some driver's HDMI source
files.
Several of the HDMI helpers remain in EDID code because both share parts
of their implementation internally. With better refractoring of the EDID
code, those HDMI helpers could be moved into the display-helper library
as well.
v3:
* fix Kconfig dependencies (Javier)
v2:
* reduce HDMI helpers to avoid exporting functions (Jani)
* fix include statements (Jani, Javier)
* update Kconfig symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
We'd like panels to be able to add things to debugfs underneath the
connector's directory. Let's plumb it through. A panel will be able to
put things in a "panel" directory under the connector's
directory. Note that debugfs is not ABI and so it's always possible
that the location that the panel gets for its debugfs could change in
the future.
NOTE: this currently only works if you're using a modern
architecture. Specifically the plumbing relies on _both_
drm_bridge_connector and drm_panel_bridge. If you're not using one or
both of these things then things won't be plumbed through.
As a side effect of this change, drm_bridges can also get callbacks to
put stuff underneath the connector's debugfs directory. At the moment
all bridges in the chain have their debugfs_init() called with the
connector's root directory.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
Commit 4adc33f36d ("drm/edid: Split deep color modes between RGB and
YUV444") introduced two new variables in struct drm_display_info and
their documentation, but the documentation part had a typo resulting in
a doc build warning.
Fixes: 4adc33f36d ("drm/edid: Split deep color modes between RGB and YUV444")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202094340.875190-1-maxime@cerno.tech
The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:
The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
is supported for all modes indicated by the DC_XXbit flags.
So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.
In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0c94692e0 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-4-maxime@cerno.tech
Add 2 drm_connector privacy-screen helper functions:
1. drm_connector_attach_privacy_screen_provider(), this function creates
and attaches the standard privacy-screen properties and registers a
generic notifier for generating sysfs-connector-status-events on external
changes to the privacy-screen status.
2. drm_connector_update_privacy_screen(), update the privacy-screen's
sw_state if the connector has a privacy-screen.
Changes in v2:
- Do not update connector->state->privacy_screen_sw_state on
atomic-commits.
- Change drm_connector_update_privacy_screen() to take drm_connector_state
as argument instead of a full drm_atomic_state. This allows the helper
to be called by drivers when they are enabling crtcs/encoders/connectors.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-6-hdegoede@redhat.com
Add support for generic electronic privacy screen properties, that
can be added by systems that have an integrated EPS.
Changes in v2 (Hans de Goede)
- Create 2 properties, "privacy-screen sw-state" and
"privacy-screen hw-state", to deal with devices where the OS might be
locked out of making state changes
- Write kerneldoc explaining how the 2 properties work together, what
happens when changes to the state are made outside of the DRM code's
control, etc.
Changes in v3 (Hans de Goede)
- Some small tweaks to the kerneldoc describing the 2 properties
Changes in v4 (Hans de Goede)
- Change the "Enabled, locked" and "Disabled, locked" hw-state enum value
names to "Enabled-locked" and "Disabled-locked". The xrandr command shows
all possible enum values separated by commas in its output, so having a
comma in an enum name is not a good idea.
- Do not add a privacy_screen_hw_state member to drm_connector_state
since this property is immutable its value must be directly stored in the
obj->properties->values array
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-2-hdegoede@redhat.com
The VESA Organization Vendor-Specific Data Block, defined in VESA
DisplayID Standard v2.0, specifies the eDP Multi-SST Operation (MSO)
stream count and segment pixel overlap.
DisplayID v1.3 has Appendix B: DisplayID as an EDID Extension,
describing how DisplayID sections may be embedded in EDID extension
blocks. DisplayID v2.0 does not have such a section, perhaps implying
that DisplayID v2.0 data should not be included in EDID extensions, but
rather in a "pure" DisplayID structure at its own DDC address pair
A4h/A5h, as described in VESA E-DDC Standard v1.3 chapter 3.
However, in practice, displays out in the field have embedded DisplayID
v2.0 data blocks in EDID extensions, including, in particular, some eDP
MSO displays, where a pure DisplayID structure is not available at all.
Parse the MSO data from the DisplayID data block. Do it as part of
drm_add_display_info(), extending it to parse also DisplayID data to
avoid requiring extra calls to update the information.
v2: Check for VESA OUI (Ville)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73ca2887e7b37880690f5c9ba4594c9cd1170669.1630419362.git.jani.nikula@intel.com
Add a new drm_connector_oob_hotplug_event() function and
oob_hotplug_event drm_connector_funcs member.
On some hardware a hotplug event notification may come from outside the
display driver / device. An example of this is some USB Type-C setups
where the hardware muxes the DisplayPort data and aux-lines but does
not pass the altmode HPD status bit to the GPU's DP HPD pin.
In cases like this the new drm_connector_oob_hotplug_event() function can
be used to report these out-of-band events.
Changes in v2:
- Make drm_connector_oob_hotplug_event() take a fwnode as argument and
have it call drm_connector_find_by_fwnode() internally. This allows
making drm_connector_find_by_fwnode() a drm-internal function and
avoids code outside the drm subsystem potentially holding on the
a drm_connector reference for a longer period.
Changes in v3:
- Drop the data argument to the drm_connector_oob_hotplug_event
function since it is not used atm. This can be re-added later when
a use for it actually arises.
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-5-hdegoede@redhat.com
Add a function to find a connector based on a fwnode.
This will be used by the new drm_connector_oob_hotplug_event()
function which is added by the next patch in this patch-set.
Changes in v2:
- Complete rewrite to use a global connector list in drm_connector.c
rather then using a class-dev-iter in drm_sysfs.c
Changes in v3:
- Add forward declaration for struct fwnode_handle to drm_crtc_internal.h
(fixes warning reported by kernel test robot <lkp@intel.com>)
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-4-hdegoede@redhat.com
Add a fwnode pointer to struct drm_connector and register an acpi_bus_type
for the connectors with the ACPI subsystem (when CONFIG_ACPI is enabled).
The adding of the fwnode pointer allows drivers to associate a fwnode
that represents a connector with that connector.
When the new fwnode pointer points to an ACPI-companion, then the new
acpi_bus_type will cause the ACPI subsys to bind the device instantiated
for the connector with the fwnode by calling acpi_bind_one(). This will
result in a firmware_node symlink under /sys/class/card#-<connecter-name>/
which helps to verify that the fwnode-s and connectors are properly
matched.
Changes in v2:
- Make drm_connector_cleanup() call fwnode_handle_put() on
connector->fwnode and document this
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20210817215201.795062-3-hdegoede@redhat.com
The drm_connector detect, drm_dp_aux transfer and mipi_dsi_host
operations typically require to access their underlying device to
perform what is expected of them.
However, there's no guarantee on the fact that the device has been
enabled through atomic_enable or similar that will usually power the
device. The access to an unpowered device is then an undefined behaviour
ranging from the access being ignored to a hard CPU hang.
Let's document that expectation to avoid as much as possible those
consequences.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-3-maxime@cerno.tech
The intel driver uses the same logic to attach the Colorspace property
in multiple places and we'll need it in vc4 too. Let's move that common
code in a helper.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-4-maxime@cerno.tech
All the drivers that support the HDR metadata property have a similar
function to compare the metadata from one connector state to the next,
and force a mode change if they differ.
All these functions run pretty much the same code, so let's turn it into
an helper that can be shared across those drivers.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-2-maxime@cerno.tech
All the drivers that implement HDR output call pretty much the same
function to initialise the hdr_output_metadata property, and while the
creation of that property is in a helper, every driver uses the same
code to attach it.
Provide a helper for it as well
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-1-maxime@cerno.tech
Add support for DP-HDMI2.1 PCON
From the series cover letter:
This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651
This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).
With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.
This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.
Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com
This patch parses HFVSDB fields for DSC1.2 capabilities of an
HDMI2.1 sink. These fields are required by a source to understand the
DSC capability of the sink, to set appropriate PPS parameters,
before transmitting compressed data stream.
v2: Addressed following issues as suggested by Uma Shankar:
-Added a new struct for hdmi dsc cap
-Fixed bugs in macros usage.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-4-ankit.k.nautiyal@intel.com
This patch parses MAX_FRL field to get the MAX rate in Gbps that
the HDMI 2.1 panel can support in FRL mode. Source need this
field to determine the optimal rate between the source and sink
during FRL training.
v2: Fixed minor bugs, and removed extra wrapper function (Uma Shankar)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch FROM_SIGN_OFF_MISMATCH, PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-3-ankit.k.nautiyal@intel.com
Currently, downstream port type is only reported in debugfs. This
information should be considered important since it reflects the actual
physical connector type. Some userspace (e.g. window compositors)
may want to show this info to a user.
The 'subconnector' property is already utilized for DVI-I and TV-out for
reporting connector subtype.
The initial motivation for this feature came from i2c test [1].
It is supposed to be skipped on VGA connectors, but it cannot
detect VGA over DP and fails instead.
v2:
- Ville: utilized drm_dp_is_branch()
- Ville: implement DP 1.0 downstream type info
- Replaced create_dp_properties with add_dp_subconnector_property
- Added dp_set_subconnector_property helper
v4:
- Ville: add DP1.0 best assumption about subconnector
- Ville: assume DVI is DVI-D
- Ville: reuse Writeback enum value for Virtual subconnector
- Renamed #defines: HDMI -> HDMIA, DP -> DisplayPort
v5: rebase
v6:
- Jani Nikula: renamed a function name
- Jani Nikula: addressed the issues with documentation
[1]: https://bugs.freedesktop.org/show_bug.cgi?id=104097
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-1-git-send-email-jeevan.b@intel.com
Use inline comments for the drm_bus_flags enum.
This makes it easier to add more description comments in the future
should the need arise.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-8-sam@ravnborg.org
This counter will be used by drm_helper_probe_detect caller to determine
if anything had changed(including edid, connection status and etc).
Hardware specific driver detect hooks are responsible for updating this
counter when some change is detected to notify the drm part,
which can trigger for example hotplug event.
Also now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v2: Added documentation for the new counter. Rename change_counter to
epoch_counter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers
v6:
* Call it monitor_range (Ville)
v5:
* Use the renamed flags
v4:
* Use is_display_descriptor() (Ville)
* Name the monitor range flags (Ville)
v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-2-manasi.d.navare@intel.com
The drm_display_info structure contains many fields related to HDMI
sinks, but none that identifies if a sink compliant with CEA-861 (EDID)
shall be treated as an HDMI sink or a DVI sink. Add such a flag, and
populate it according to section 8.3.3 ("DVI/HDMI Device
Discrimination") of the HDMI v1.3 specification.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-4-laurent.pinchart@ideasonboard.com
drm_connector.c contains a map of connector types (DRM_MODE_CONNECTOR_*)
to name strings, but doesn't expose it. This leads to drivers having to
store a similar map.
Add a new drm_get_connector_type_name() helper function that return a
name string for a connector type.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-3-laurent.pinchart@ideasonboard.com
Unlike DP 1.2 edid corruption test, DP 1.4 requires to calculate
real CRC value of the last edid data block, and write it back.
Current edid CRC calculates routine adds the last CRC byte,
and check if non-zero.
This behavior is not accurate; actually, we need to return
the actual CRC value when corruption is detected.
This commit changes this issue by returning the calculated CRC,
and initiate the required sequence.
Change since v7
- Fix for CI.CHECKPATCH
Change since v6
- Add return check
Change since v5
- Obtain real CRC value before dumping bad edid
Change since v4
- Fix for CI.CHECKPATCH
Change since v3
- Fix a minor typo.
Change since v2
- Rewrite checksum computation routine to avoid duplicated code.
- Rename to avoid confusion.
Change since v1
- Have separate routine for returning real CRC.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211160832.24259-1-Jerry.Zuo@amd.com
Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.
Hans de Goede (changes in v2):
Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.
Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-1-hdegoede@redhat.com
Sometimes we want to override a connector's panel_orientation from the
kernel commandline. Either for testing and for special cases, e.g. a kiosk
like setup which uses a TV mounted in portrait mode.
Users can already specify a "rotate" option through a video= kernel cmdline
option. But that only supports 0/180 degrees (see drm_client_modeset TODO)
and only works for in kernel modeset clients, not for userspace kms users.
The "panel-orientation" connector property OTOH does support 90/270 degrees
as it leaves dealing with the rotation up to userspace and this does work
for userspace kms clients (at least those which support this property).
Changes in v2:
-Add missing ':' after @panel_orientation (reported by kbuild test robot)
BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-9-hdegoede@redhat.com
Because between HDMI and DP have different colorspaces, it adds
drm_mode_create_dp_colorspace_property() function for creating of DP
colorspace property.
v3: Addressed review comments from Ville
- Add new colorimetry options for DP 1.4a spec.
- Separate set of colorimetry enum values for DP.
v4: Add additional comments to struct drm_prop_enum_list.
Polishing an enum string of struct drm_prop_enum_list
v5: Change definitions of DRM_MODE_COLORIMETRYs to follow HDMI prefix and
DP abbreviations.
Add missed variables on dp_colorspaces.
Fix typo. [Uma]
v6: Addressed review comments from Ilia and Ville
- Split drm_mode_create_colorspace_property() to DP and HDMI connector.
v7: Fix typo [Jani Saarinen]
Fix white space.
v8: Addressed review comments from Ville
- Drop colorimetries which have another way to distinguish or which
would not be used.
v9: Addressed review comments from Ville
- Split hunk into renaming and adding of code.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-5-gwan-gyeong.mun@intel.com
As between HDMI and DP have different colorspaces, in order to distinguish
colorspace of DP and HDMI, it renames drm_mode_create_colorspace_property()
function to drm_mode_create_hdmi_colorspace_property() function for HDMI
connector.
In order to apply changed drm api, i915 driver has channged.
It addresses review comments from Ville.
- Split hunk into renaming and adding of code.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-4-gwan-gyeong.mun@intel.com
Currently we restrict the number of encoders that can be linked to
a connector to 3, increase it to match the maximum number of encoders
that can be initialized(32).
To more effiently do that lets switch from an array of encoder ids to
bitmask.
v2: Fixing missed return on amdgpu_dm_connector_to_encoder()
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913232857.389834-2-jose.souza@intel.com
Fixes the following warnings:
../drivers/gpu/drm/drm_connector.c:989: WARNING: Unexpected indentation.
../drivers/gpu/drm/drm_connector.c:993: WARNING: Unexpected indentation.
../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string.
../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string.
Changes in v2:
- Use () instead of & for functions (Sam)
Fixes: 1b27fbdde1 ("drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers")
Fixes: bb5a45d40d ("drm/hdcp: update content protection property with uevent")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812140112.6702-1-sean@poorly.run
This patch adds a DRM ENUM property to the selected connectors.
This property is used for mentioning the protected content's type
from userspace to kernel HDCP authentication.
Type of the stream is decided by the protected content providers.
Type 0 content can be rendered on any HDCP protected display wires.
But Type 1 content can be rendered only on HDCP2.2 protected paths.
So when a userspace sets this property to Type 1 and starts the HDCP
enable, kernel will honour it only if HDCP2.2 authentication is through
for type 1. Else HDCP enable will be failed.
Pekka have completed the Weston DRM-backend review in
https://gitlab.freedesktop.org/wayland/weston/merge_requests/48
and the UAPI for HDCP 2.2 looks good.
The userspace is accepted in Weston.
v2:
cp_content_type is replaced with content_protection_type [daniel]
check at atomic_set_property is removed [Maarten]
v3:
%s/content_protection_type/hdcp_content_type [Pekka]
v4:
property is created for the first requested connector and then reused.
[Danvet]
v5:
kernel doc nits addressed [Daniel]
Rebased as part of patch reordering.
v6:
Kernel docs are modified [pekka]
v7:
More details in Kernel docs. [pekka]
v8:
Few more clarification into kernel doc of content type [pekka]
v9:
Small fixes in coding style.
v10:
Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
Allow passing ddc adapter pointer to the init function. Even if
drm_connector_init() sometime in the future decides to e.g. memset() all
connector fields to zeros, the newly added function ensures that at its
completion the ddc member of connector is correctly set.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3915224ae895240fd0973cf7f06b9d453e4d8520.1564161140.git.andrzej.p@collabora.com
Add generic code which creates symbolic links in sysfs, pointing to ddc
interface used by a particular video output. For example:
ls -l /sys/class/drm/card0-HDMI-A-1/ddc
lrwxrwxrwx 1 root root 0 Jun 24 10:42 /sys/class/drm/card0-HDMI-A-1/ddc \
-> ../../../../soc/13880000.i2c/i2c-2
This makes it easy for user to associate a display with its ddc adapter
and use e.g. ddcutil to control the chosen monitor.
This patch adds an i2c_adapter pointer to struct drm_connector. Particular
drivers can then use it instead of using their own private instance. If a
connector contains a ddc, then create a symbolic link in sysfs.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d470def6cd661b777faeee67b5838a4623c4010e.1564161140.git.andrzej.p@collabora.com
Add the DRM_BUS_FLAG_SHARP_SIGNALS to the drm_bus_flags enum.
This flags can be used when the display must be driven with the
Sharp-specific signals SPL, CLS, REV, PS.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603153120.23947-2-paul@crapouillou.net
Rotations and reflections setup are needed in some scenarios to initialise
properly the initial framebuffer. Some drivers already had a bunch of
quirks to deal with this, such as either a private kernel command line
parameter (omapdss) or on the device tree (various panels).
In order to accomodate this, let's create a video mode parameter to deal
with the rotation and reflexion.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com
