To support SNP, IOMMU needs to be enabled, and prohibits IOMMU
configurations where DTE[Mode]=0, which means it cannot be supported with
IOMMU passthrough domain (a.k.a IOMMU_DOMAIN_IDENTITY),
and when AMD IOMMU driver is configured to not use the IOMMU host (v1) page
table. Otherwise, RMP table initialization could cause the system to crash.
The request to enable SNP support in IOMMU must be done before PCI
initialization state of the IOMMU driver because enabling SNP affects
how IOMMU driver sets up IOMMU data structures (i.e. DTE).
Unlike other IOMMU features, SNP feature does not have an enable bit in
the IOMMU control register. Instead, the IOMMU driver introduces
an amd_iommu_snp_en variable to track enabling state of SNP.
Introduce amd_iommu_snp_enable() for other drivers to request enabling
the SNP support in IOMMU, which checks all prerequisites and determines
if the feature can be safely enabled.
Please see the IOMMU spec section 2.12 for further details.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-7-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Modify existing SNP feature check to use the helper function
check_feature_on_all_iommus() to ensure consistency among all IOMMUs.
Also report IOMMU SNP support information for each IOMMU.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-6-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The ACPI IVRS table can contain multiple IVHD blocks. Each block contains
information used to initialize each IOMMU instance.
Currently, init_iommu_all sequentially process IVHD block and initialize
IOMMU instance one-by-one. However, certain features require all IOMMUs
to be configured in the same way system-wide. In case certain IVHD blocks
contain inconsistent information (most likely FW bugs), the driver needs
to go through and try to revert settings on IOMMUs that have already been
configured.
A solution is to split IOMMU initialization into 3 phases:
Phase1 : Processes information of the IVRS table for all IOMMU instances.
This allow all IVHDs to be processed prior to enabling features.
Phase2 : Early feature support check on all IOMMUs (using information in
IVHD blocks.
Phase3 : Iterates through all IOMMU instances and enabling features.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-5-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some IOMMU features require that all IOMMUs must support the feature,
which is determined by checking the support bit in the Extended Feature
Register 1 and 2 (EFR/EFR2) on all IOMMUs. This check is done by the
function check_feature_on_all_iommus(), which iterates through all
IOMMUs everytime it is called.
Instead, introduce a global variable to store common EFR/EFR2 among all
IOMMUs. In case of inconsistent EFR/EFR2 masks are detected on an IOMMU,
a FW_BUG warning is reported.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to enable SysMMU v7 with VM register layout, at least the
default VM instance (n=0) must be enabled, in addition to enabling the
SysMMU itself. To do so, add corresponding write to MMU_CTRL_VM[0]
register, before writing to MMU_CTRL register.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-7-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SysMMU v7 might have different register layouts (VM capable or non-VM
capable). Virtual Machine registers (if present) implement multiple
translation domains. If VM registers are not present, the driver
shouldn't try to access those.
Check which layout is implemented in current SysMMU module (by reading
the capability registers) and prepare the corresponding variant
structure for further usage.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-6-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
At the moment the driver supports SysMMU v1..v5 versions. SysMMU v5 has
different register layout than SysMMU v1..v3. Instead of checking the
version each time before reading/writing the registers, let's create
corresponding register structure for each SysMMU version and set the
needed structure on init, checking the SysMMU version one single time.
This way is faster and more elegant.
No behavior changes from the user's point of view, it's only a
refactoring patch.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-5-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SysMMU v5+ supports 36 bit physical address space. Set corresponding DMA
mask to avoid falling back to SWTLBIO usage in dma_map_single() because
of failed dma_capable() check.
The original code for this fix was suggested by Marek.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Co-developed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220714165550.8884-4-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If iommu_device_register() fails in exynos_sysmmu_probe(), the previous
calls have to be cleaned up. In this case, the iommu_device_sysfs_add()
should be cleaned up, by calling its remove counterpart call.
Fixes: d2c302b6e8 ("iommu/exynos: Make use of iommu_device_register interface")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-3-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Using SZ_4K in context of SysMMU driver is better than using PAGE_SIZE,
as PAGE_SIZE might have different value on different platforms. Though
it would be even better to use more specific constants, already existing
in SysMMU driver. Make the code more strict by using SPAGE_ORDER and
SPAGE_SIZE constants.
It also makes sense, as __sysmmu_tlb_invalidate_entry() also uses
SPAGE_* constants for further calculations with num_inv param, so it's
logical that num_inv should be previously calculated using also SPAGE_*
values.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-2-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mtk_iommu_mm_dts_parse() can fail with EPROBE_DEFER if not all larbs
have probed yet, so use dev_err_probe() to avoid logging as an error in
that case. Also drop the return value from the message since it's
already printed by dev_err_probe(), and add the missing newline at the
end.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220712214427.544860-1-nfraprado@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The g_iommus and g_num_of_iommus is not used anywhere. Remove them to
avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU hot-add process starts from dmar_device_hotplug(). It
uses the global dmar_global_lock to synchronize all the hot-add and
hot-remove paths. In the hot-add path, the new IOMMU data structures
are allocated firstly by dmar_parse_one_drhd() and then initialized by
dmar_hp_add_drhd(). All the IOMMU units are allocated and initialized
in the same synchronized path. There is no case where any IOMMU unit
is created and then initialized for multiple times.
This removes the unnecessary check in intel_iommu_add() which is the
last reference place of the global IOMMU array.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a DMA domain is attached to a device, it needs to allocate a domain
ID from its IOMMU. Currently, the domain ID information is stored in two
static arrays embedded in the domain structure. This can lead to memory
waste when the driver is running on a small platform.
This optimizes these static arrays by replacing them with an xarray and
consuming memory on demand.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Switch dmar unit sequence id allocation and release from bitmap to IDA
interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is not used anywhere. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Using a global device_domain_lock spinlock to protect per-domain device
tracking lists is an inefficient way, especially considering this lock
is also needed in the hot paths. This optimizes the locking mechanism
by converting the global lock to per domain lock.
On the other hand, as the device tracking lists are never accessed in
any interrupt context, there is no need to disable interrupts while
spinning. Replace irqsave variant with spinlock calls.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device_domain_lock is used to protect the device tracking list of
a domain. Remove unnecessary spin_lock/unlock()'s and move the necessary
ones around the list access.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fold __dmar_remove_one_dev_info() into dmar_remove_one_dev_info() which
is its only caller. Make the spin lock critical range only cover the
device list change code and remove some unnecessary checks.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the IOMMU domain is about to be freed, it should not be set on any
device. Instead of silently dealing with some bug cases, it's better to
trigger a warning to report and fix any potential bugs at the first time.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu->lock is used to protect the per-IOMMU pasid directory table
and pasid table. Move the spinlock acquisition/release into the helpers
to make the code self-contained.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu->lock is used to protect the per-IOMMU domain ID resource.
Moving the lock into the ID alloc/free helpers makes the code more
compact. At the same time, the device_domain_lock is irrelevant to
the domain ID resource, remove its assertion as well.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu->lock is used to protect changes in root/context/pasid tables
and domain ID allocation. There's no use case to change these resources
in any interrupt context. Therefore, it is unnecessary to disable the
interrupts when the spinlock is held. The same thing happens on the
device_domain_lock side, which protects the device domain attachment
information. This replaces spin_lock/unlock_irqsave/irqrestore() calls
with the normal spin_lock/unlock().
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU root table is allocated and freed in the IOMMU initialization
code in static boot or hot-remove paths. There's no need for a spinlock.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use pci_get_domain_bus_and_slot() instead of searching the global list
to retrieve the pci device pointer. This also removes the global
device_domain_list as there isn't any consumer anymore.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The disable_dmar_iommu() is called when IOMMU initialization fails or
the IOMMU is hot-removed from the system. In both cases, there is no
need to clear the IOMMU translation data structures for devices.
On the initialization path, the device probing only happens after the
IOMMU is initialized successfully, hence there're no translation data
structures.
On the hot-remove path, there is no real use case where the IOMMU is
hot-removed, but the devices that it manages are still alive in the
system. The translation data structures were torn down during device
release, hence there's no need to repeat it in IOMMU hot-remove path
either. This removes the unnecessary code and only leaves a check.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The domain_translation_struct debugfs node is used to dump the DMAR page
tables for the PCI devices. It potentially races with setting domains to
devices. The existing code uses the global spinlock device_domain_lock to
avoid the races.
This removes the use of device_domain_lock outside of iommu.c by replacing
it with the group mutex lock. Using the group mutex lock is cleaner and
more compatible to following cleanups.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This header file is private to the Intel IOMMU driver. Move it to the
driver folder.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
tboot_force_iommu() is only called by the Intel IOMMU driver. Move the
helper into that driver. No functional change intended.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The exported symbol intel_iommu_gfx_mapped is not used anywhere in the
tree. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This header file is private to the Intel IOMMU driver. Move it to the
driver folder.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fold the arm_smmu_dev_has_feature arm_smmu_dev_feature_enabled into
the main methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220708080616.238833-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All drivers that implement get_resv_regions just use
generic_put_resv_regions to implement the put side. Remove the
indirections and document the allocations constraints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This method is never actually called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Map/unmap_pags() allows map and unmap multiple pages of the same size
in one call, which can improve performance by reducing the numbers of
vmexits. With map/unmap_pages() implemented, the prior map/unmap()
callbacks are deprecated.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220605161152.3171-1-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] 0e862838f2
Fixes: ee34b32d8c ("dmar: support for parsing Remapping Hardware Static Affinity structure")
Cc: stable@vger.kernel.org # 2.6.33+
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
TLB sync timeouts can be due to various reasons such as TBU power down
or pending TCU/TBU invalidation/sync and so on. Debugging these often
require dumping of some implementation defined registers to know the
status of TBU/TCU operations and some of these registers are not
accessible in non-secure world such as from kernel and requires SMC
calls to read them in the secure world. So, add this debug support
to dump implementation defined registers for TLB sync timeout issues.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220708094230.4349-1-quic_saipraka@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Now that the irq_data_update_affinity helper exists, enforce its use
by returning a a const cpumask from irq_data_get_affinity_mask.
Since the previous commit already updated places that needed to call
irq_data_update_affinity, this commit updates the remaining code that
either did not modify the cpumask or immediately passed the modified
mask to irq_set_affinity.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-8-samuel@sholland.org
Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA. So add
the quirk IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT to let level 1 and level 2
pgtable support at most 35bit PA.
Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-3-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and
cause pgtable PA size larger than 32bit.
Since Mediatek IOMMU hardware support at most 35bit PA in pgtable,
so add a quirk to allow the PA of pgtables support up to bit35.
Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename 'device_id' as 'sbdf' and extend it to 32bit so that we can
pass PCI segment ID to ppr_notifier(). Also pass PCI segment ID to
pci_get_domain_bus_and_slot() instead of default value.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-36-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename struct device_state.devid variable to struct device_state.sbdf
and extend it to 32-bit to include the 16-bit PCI segment ID via
the helper function get_pci_sbdf_id().
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-35-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By default, PCI segment is zero and can be omitted. To support system
with non-zero PCI segment ID, modify the parsing functions to allow
PCI segment ID.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-33-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extend current device ID variables to 32-bit to include the 16-bit
segment ID when parsing device information from IVRS table to initialize
each IOMMU.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-31-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current get_device_id() only provide 16-bit PCI device ID (i.e. BDF).
With multiple PCI segment support, we need to extend the helper function
to include PCI segment ID.
So, introduce a new helper function get_device_sbdf_id() to replace
the current get_pci_device_id().
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-30-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To include a pointer to per PCI segment device table.
Also include struct amd_iommu as one of the function parameter to
amd_iommu_apply_erratum_63() since it is needed when setting up DTE.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-27-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Include struct amd_iommu_pci_seg as a function parameter since
we need to access per PCI segment device table.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-26-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Start using per PCI segment data structures instead of global data
structures.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-22-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pass amd_iommu structure as one of the parameter to these functions
as its needed to retrieve variable tables inside these functions.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-20-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pass amd_iommu structure as one of the parameter to amd_irte_ops functions
since its needed to activate/deactivate the iommu.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-19-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a pointer to struct amd_iommu to amd_ir_data structure, which
can be used to correlate interrupt remapping data to a per-PCI-segment
interrupt remapping table.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-18-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use rlookup_amd_iommu() helper function which will give per PCI
segment rlookup_table.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-16-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With multiple pci segment support, number of BDF supported by each
segment may differ. Hence introduce per segment device table size
which depends on last_bdf. This will replace global
"device_table_size" variable.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-12-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code uses global "amd_iommu_last_bdf" to track the last bdf
supported by the system. This value is used for various memory
allocation, device data flushing, etc.
Introduce per PCI segment last_bdf which will be used to track last bdf
supported by the given PCI segment and use this value for all per
segment memory allocations. Eventually it will replace global
"amd_iommu_last_bdf".
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newer AMD systems can support multiple PCI segments. In order to support
multiple PCI segments IVMD table in IVRS structure is enhanced to
include pci segment id. Update ivmd_header structure to include "pci_seg".
Also introduce per PCI segment unity map list. It will replace global
amd_iommu_unity_map list.
Note that we have used "reserved" field in IVMD table to include "pci_seg
id" which was set to zero. It will take care of backward compatibility
(new kernel will work fine on older systems).
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This will replace global rlookup table (amd_iommu_rlookup_table).
Add helper functions to set/get rlookup table for the given device.
Also add macros to get seg/devid from sbdf.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce per PCI segment device table. All IOMMUs within the segment
will share this device table. This will replace global device
table i.e. amd_iommu_dev_table.
Also introduce helper function to get the device table for the given IOMMU.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newer AMD systems can support multiple PCI segments, where each segment
contains one or more IOMMU instances. However, an IOMMU instance can only
support a single PCI segment.
Current code assumes that system contains only one pci segment (segment 0)
and creates global data structures such as device table, rlookup table,
etc.
Introducing per PCI segment data structure, which contains segment
specific data structures. This will eventually replace the global
data structures.
Also update `amd_iommu->pci_seg` variable to point to PCI segment
structure instead of PCI segment ID.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
struct iommu_dev_data contains member "pdev" to point to pci_dev. This is
valid for only PCI devices and for other devices this will be NULL. This
causes unnecessary "pdev != NULL" check at various places.
Replace "struct pci_dev" member with "struct device" and use to_pci_dev()
to get pci device reference as needed. Also adjust setup_aliases() and
clone_aliases() function.
No functional change intended.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Required for turning on per-process page tables for the GPU.
Signed-off-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220614230136.3726047-1-emma@anholt.net
Signed-off-by: Will Deacon <will@kernel.org>
kmalloc will round up the request size to power of 2, and current
iova_magazine's size is 1032 (1024+8) bytes, so each instance
allocated will get 2048 bytes from kmalloc, causing around 1KB
waste.
Change IOVA_MAG_SIZE from 128 to 127 to make size of 'iova_magazine'
1024 bytes so that no memory will be wasted.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220703114450.15184-1-feng.tang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU driver shares the pasid table for PCI alias devices. When the
RID2PASID entry of the shared pasid table has been filled by the first
device, the subsequent device will encounter the "DMAR: Setup RID2PASID
failed" failure as the pasid entry has already been marked as present.
As the result, the IOMMU probing process will be aborted.
On the contrary, when any alias device is hot-removed from the system,
for example, by writing to /sys/bus/pci/devices/.../remove, the shared
RID2PASID will be cleared without any notifications to other devices.
As the result, any DMAs from those rest devices are blocked.
Sharing pasid table among PCI alias devices could save two memory pages
for devices underneath the PCIe-to-PCI bridges. Anyway, considering that
those devices are rare on modern platforms that support VT-d in scalable
mode and the saved memory is negligible, it's reasonable to remove this
part of immature code to make the driver feasible and stable.
Fixes: ef848b7e5a ("iommu/vt-d: Setup pasid entry for RID2PASID support")
Reported-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PAGE_{SIZE,SHIFT} macros depend on the configured kernel's page size, but
the driver expects values calculated as for 4KB pages. Fix this.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220623093629.32178-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since .release_device is now called through per-device ops, any call
which gets as far as a driver definitely *is* for that driver, for a
device which has successfully passed .probe_device, so all the checks to
that effect are now redundant and can be removed. In the same vein we
can also skip freeing fwspecs which are now managed by core code.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/02671dbfad7a3343fc25a44222350efcb455fe3c.1655822151.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Many drivers do nothing meaningful for .release_device, and it's neatly
abstracted to just two callsites in the core code, so let's make it
optional to implement.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/bda9d3eb4527eac8f6544a15067e2529cca54a2e.1655822151.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check if there is any RMR info associated with the devices behind
the SMMU and if any, install bypass SMRs for them. This is to
keep any ongoing traffic associated with these devices alive
when we enable/reset SMMU during probe().
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-10-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check if there is any RMR info associated with the devices behind
the SMMUv3 and if any, install bypass STEs for them. This is to
keep any ongoing traffic associated with these devices alive
when we enable/reset SMMUv3 during probe().
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-9-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By default, disable_bypass flag is set and any dev without
an iommu domain installs STE with CFG_ABORT during
arm_smmu_init_bypass_stes(). Introduce a "force" flag and
move the STE update logic to arm_smmu_init_bypass_stes()
so that we can force it to install CFG_BYPASS STE for specific
SIDs.
This will be useful in a follow-up patch to install bypass
for IORT RMR SIDs.
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-8-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce a helper to check the sid range and to init the l2 strtab
entries(bypass). This will be useful when we have to initialize the
l2 strtab with bypass for RMR SIDs.
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-7-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently IORT provides a helper to retrieve HW MSI reserve regions.
Change this to a generic helper to retrieve any IORT related reserve
regions. This will be useful when we add support for RMR nodes in
subsequent patches.
[Lorenzo: For ACPI IORT]
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A callback is introduced to struct iommu_resv_region to free memory
allocations associated with the reserved region. This will be useful
when we introduce support for IORT RMR based reserved regions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steven Price <steven.price@arm.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220615101044.1972-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Notifier calling chain uses priority to determine the execution
order of the notifiers or listeners registered to the chain.
PCI bus device hot add utilizes the notification mechanism.
The current code sets low priority (INT_MIN) to Intel
dmar_pci_bus_notifier and postpones DMAR decoding after adding
new device into IOMMU. The result is that struct device pointer
cannot be found in DRHD search for the new device's DMAR/IOMMU.
Subsequently, the device is put under the "catch-all" IOMMU
instead of the correct one. This could cause system hang when
device TLB invalidation is sent to the wrong IOMMU. Invalidation
timeout error and hard lockup have been observed and data
inconsistency/crush may occur as well.
This patch fixes the issue by setting a positive priority(1) for
dmar_pci_bus_notifier while the priority of IOMMU bus notifier
uses the default value(0), therefore DMAR decoding will be in
advance of DRHD search for a new device to find the correct IOMMU.
Following is a 2-step example that triggers the bug by simulating
PCI device hot add behavior in Intel Sapphire Rapids server.
echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove
echo 1 > /sys/bus/pci/rescan
Fixes: 59ce0515cd ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope")
Cc: stable@vger.kernel.org # v3.15+
Reported-by: Zhang, Bernice <bernice.zhang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in
alloc_pte and free_clear_pte. cmpxchg returns success in ZF flag, so this
change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg). Also, remove racy explicit assignment to pteval
when cmpxchg fails, this is what try_cmpxchg does implicitly from
*pte in an atomic way.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220525145416.10816-1-ubizjak@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since only the INFRA type IOMMU needs to modify register(s) in the
pericfg iospace, it's safe to drop the pericfg_comp_str NULL check;
also, directly assign the regmap handle to data->pericfg instead of
to the infracfg variable to improve code readability.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220616110830.26037-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This driver will get support for more SoCs and the list of infracfg
compatibles is expected to grow: in order to prevent getting this
situation out of control and see a long list of compatible strings,
add support to retrieve a handle to infracfg's regmap through a
new "mediatek,infracfg" phandle.
In order to keep retrocompatibility with older devicetrees, the old
way is kept in place.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220616110830.26037-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When many devices share the same iova domain, iommu_dma_init_domain()
may be called at the same time. The checking of iovad->start_pfn will
all get false in iommu_dma_init_domain() and both enter init_iova_domain()
to do iovad initialization.
Fix this by protecting init_iova_domain() with iommu_dma_cookie->mutex.
Exception backtrace:
rb_insert_color(param1=0xFFFFFF80CD2BDB40, param3=1) + 64
init_iova_domain() + 180
iommu_setup_dma_ops() + 260
arch_setup_dma_ops() + 132
of_dma_configure_id() + 468
platform_dma_configure() + 32
really_probe() + 1168
driver_probe_device() + 268
__device_attach_driver() + 524
__device_attach() + 524
bus_probe_device() + 64
deferred_probe_work_func() + 260
process_one_work() + 580
worker_thread() + 1076
kthread() + 332
ret_from_fork() + 16
Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220530120748.31733-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For devices stuck behind a conventional PCI bus, saving extra cycles at
33MHz is probably fairly significant. However since native PCI Express
is now the norm for high-performance devices, the optimisation to always
prefer 32-bit addresses for the sake of avoiding DAC is starting to look
rather anachronistic. Technically 32-bit addresses do have shorter TLPs
on PCIe, but unless the device is saturating its link bandwidth with
small transfers it seems unlikely that the difference is appreciable.
What definitely is appreciable, however, is that the IOVA allocator
doesn't behave all that well once the 32-bit space starts getting full.
As DMA working sets get bigger, this optimisation increasingly backfires
and adds considerable overhead to the dma_map path for use-cases like
high-bandwidth networking. We've increasingly bandaged the allocator
in attempts to mitigate this, but it remains fundamentally at odds with
other valid requirements to try as hard as possible to satisfy a request
within the given limit; what we really need is to just avoid this odd
notion of a speculative allocation when it isn't beneficial anyway.
Unfortunately that's where things get awkward... Having been present on
x86 for 15 years or so now, it turns out there are systems which fail to
properly define the upper limit of usable IOVA space for certain devices
and this trick was the only thing letting them work OK. I had a similar
ulterior motive for a couple of early arm64 systems when originally
adding it to iommu-dma, but those really should be fixed with proper
firmware bindings by now. Let's be brave and default it to off in the
hope that CI systems and developers will find and fix those bugs, but
expect that desktop-focused distro configs are likely to want to turn
it back on for maximum compatibility.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/3f06994f9f370f9d35b2630ab75171ecd2065621.1654782107.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove().
Signed-off-by: Ke Liu <liuke94@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220608021655.1538087-1-liuke94@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that fw_devlink=on and fw_devlink.strict=1 by default and fw_devlink
supports iommu DT properties, the execution will never get to the point
where driver_deferred_probe_check_state() is called before the supplier
has probed successfully or before deferred probe timeout has expired.
So, delete the call and replace it with -ENODEV.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220601070707.3946847-9-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
-----BEGIN PGP SIGNATURE-----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=n2rk
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
On some systems it can take a long time for the hardware to enable the
GA log of the AMD IOMMU. The current wait time is only 0.1ms, but
testing showed that it can take up to 14ms for the GA log to enter
running state after it has been enabled.
Sometimes the long delay happens when booting the system, sometimes
only on resume. Adjust the timeout accordingly to not print a warning
when hardware takes a longer than usual.
There has already been an attempt to fix this with commit
9b45a7738e ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")
But that commit was based on some wrong math and did not fix the issue
in all cases.
Cc: "D. Ziegfeld" <dzigg@posteo.de>
Cc: Jörg-Volker Peetz <jvpeetz@web.de>
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220520102214.12563-1-joro@8bytes.org
Since commit 0286300e60 ("iommu: iommu_group_claim_dma_owner() must
always assign a domain") s390-iommu will get called to allocate multiple
unmanaged iommu domains for a vfio-pci device -- however the current
s390-iommu logic tolerates only one. Recognize that multiple domains can
be allocated and handle switching between DMA or different iommu domain
tables during attach_dev.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220519182929.581898-1-mjrosato@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy binding
- Minor cleanups
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmJ6eJ0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNNroB/92+cfwPyDnA8qdsSCAbyRU2ChrcZvHfKom
0YxnN6mxQxevcFcLEg8NfbueVgcpZuogrVmBy2ES7s/yJwyFbHk9Pxsq8WO1oMNC
idIZHjpS9AC4yItgHPzmZd0sUEzmOgINMjHFxdXVnVz4F6EpfrPfRucaBBDe4y1M
QjKKkjFhMuKjiZWBbQYxRjTJR2LelpK3c2rWhdBxqOLpFJ+XoEcBcaPqiLU5BLcE
Lbzg88ldneFfM8ixAv0fFY+agxv0vorWXS7GDFOg0nRStMqOeI6Y1mOSKnskVtcD
dc+Gm8tX7ObeDu/59l+2BsebSemMYapdy7QCEAQDKmna6SayFFA4
=Z0YK
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.19
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy binding
- Minor cleanups
As domain->force_snooping only impacts the devices attached with the
domain, there's no need to check against all IOMMU units. On the other
hand, force_snooping could be set on a domain no matter whether it has
been attached or not, and once set it is an immutable flag. If no
device attached, the operation always succeeds. Then this empty domain
can be only attached to a device of which the IOMMU supports snoop
control.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the attach_dev callback of the default domain ops, if the domain has
been set force_snooping, but the iommu hardware of the device does not
support SC(Snoop Control) capability, the callback should block it and
return a corresponding error code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Originally, creating the dma_ranges resource list in pre-sorted fashion
was the simplest and most efficient way to enforce the order required by
iova_reserve_pci_windows(). However since then at least one PCI host
driver is now re-sorting the list for its own probe-time processing,
which doesn't seem entirely unreasonable, so that basic assumption no
longer holds. Make iommu-dma robust and get the sort order it needs by
explicitly sorting, which means we can also save the effort at creation
time and just build the list in whatever natural order the DT had.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/35661036a7e4160850895f9b37f35408b6a29f2f.1652091160.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The data type of the return value of the iommu_map_sg_atomic
is ssize_t, but the data type of iova size is size_t,
e.g. one is int while the other is unsigned int.
When iommu_map_sg_atomic return value is compared with iova size,
it will force the signed int to be converted to unsigned int, if
iova map fails and iommu_map_sg_atomic return error code is less
than 0, then (ret < iova_len) is false, which will to cause not
do free iova, and the master can still successfully get the iova
of map fail, which is not expected.
Therefore, we need to check the return value of iommu_map_sg_atomic
in two cases according to whether it is less than 0.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220507085204.16914-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Once the group enters 'owned' mode it can never be assigned back to the
default_domain or to a NULL domain. It must always be actively assigned to
a current domain. If the caller hasn't provided a domain then the core
must provide an explicit DMA blocking domain that has no DMA map.
Lazily create a group-global blocking DMA domain when
iommu_group_claim_dma_owner is first called and immediately assign the
group to it. This ensures that DMA is immediately fully isolated on all
IOMMU drivers.
If the user attaches/detaches while owned then detach will set the group
back to the blocking domain.
Slightly reorganize the call chains so that
__iommu_group_set_core_domain() is the function that removes any caller
configured domain and sets the domains back a core owned domain with an
appropriate lifetime.
__iommu_group_set_domain() is the worker function that can change the
domain assigned to a group to any target domain, including NULL.
Add comments clarifying how the NULL vs detach_dev vs default_domain works
based on Robin's remarks.
This fixes an oops with VFIO and SMMUv3 because VFIO will call
iommu_detach_group() and then immediately iommu_domain_free(), but
SMMUv3 has no way to know that the domain it is holding a pointer to
has been freed. Now the iommu_detach_group() will assign the blocking
domain and SMMUv3 will no longer hold a stale domain reference.
Fixes: 1ea2a07a53 ("iommu: Add DMA ownership management interfaces")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Baolu Lu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
--
Just minor polishing as discussed
v3:
- Change names to __iommu_group_set_domain() /
__iommu_group_set_core_domain()
- Clarify comments
- Call __iommu_group_set_domain() directly in
iommu_group_release_dma_owner() since we know it is always selecting
the default_domain
- Remove redundant detach_dev ops check in __iommu_detach_device and
make the added WARN_ON fail instead
- Check for blocking_domain in __iommu_attach_group() so VFIO can
actually attach a new group
- Update comments and spelling
- Fix missed change to new_domain in iommu_group_do_detach_device()
v2: https://lore.kernel.org/r/0-v2-f62259511ac0+6-iommu_dma_block_jgg@nvidia.com
v1: https://lore.kernel.org/r/0-v1-6e9d2d0a759d+11b-iommu_dma_block_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-db7f0785022b+149-iommu_dma_block_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using the legacy "mmu-masters" DT binding, we reject DMA domains
since we have no guarantee of driver probe order and thus can't rely on
client drivers getting the correct DMA ops. However, we can do better
than fall back to the old no-default-domain behaviour now, by forcing an
identity default domain instead. This also means that detaching from a
VFIO domain can actually work - that looks to have been broken for over
6 years, so clearly isn't something that legacy binding users care
about, but we may as well make the driver code make sense anyway.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9805e4c492cb972bdcdd57999d2d001a2d8b5aab.1652171938.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow the NVIDIA-specific ARM SMMU implementation to bind to the SMMU
instances found on Tegra234.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220429082243.496000-4-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the Qualcomm SC8280XP platform to the list of compatible for which
the Qualcomm-impl of the ARM SMMU should apply.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503163429.960998-3-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
We currently call arm64_mm_context_put() without holding a reference to
the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to
ensure the mm only gets freed after we unpinned the ASID.
Fixes: 32784a9562 ("iommu/arm-smmu-v3: Implement iommu_sva_bind/unbind()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20220426130444.300556-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220425114136.2649310-1-yangyingliang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Groups created by VFIO backends outside the core IOMMU API should never
be passed directly into the API itself, however they still expose their
standard sysfs attributes, so we can still stumble across them that way.
Take care to consider those cases before jumping into our normal
assumptions of a fully-initialised core API group.
Fixes: 3f6634d997 ("iommu: Use right way to retrieve iommu_ops")
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {
The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).
To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.
Cc: stable@vger.kernel.org
Fixes: f78ebca8ff ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Enable the multi-bank functions for infra-iommu. We put PCIE in bank0
and USB in the last bank(bank4). and we don't use the other banks
currently, disable them.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-36-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Each bank has some independent registers. thus backup/restore them for
each a bank when suspend and resume.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-35-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The registers for each bank of the IOMMU base are in order, delta is
0x1000. Initialise the base for each bank.
For all the previous SoC, we only have bank0. thus use "do {} while()"
to allow bank0 always go.
When removing the device, Not always all the banks are initialised, it
depend on if there is masters for that bank.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-34-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We preassign some ports in a special bank via the new defined
banks_portmsk. Put it in the plat_data means it is not expected to be
adjusted dynamically.
If the iommu id in the iommu consumer's dtsi node is inside this
banks_portmsk, then we switch it to this special iommu bank, and
initialise the IOMMU bank HW.
Each bank has the independent pgtable(4GB iova range). Each bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-33-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for adding bankid, also no functional change.
In the previous SoC, each a iova_region is a domain; In the multi-banks
case, each a bank is a domain, then the original function name
"mtk_iommu_get_domain_id" is not proper. Use "iova_region_id" instead of
"domain_id".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-32-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mt8195 IOMMU HW max support 5 banks, and regarding the banks'
registers, it looks like:
----------------------------------------
|bank0 | bank1 | bank2 | bank3 | bank4|
----------------------------------------
|global |
|control| null
|regs |
-----------------------------------------
|bank |bank |bank |bank |bank |
|regs |regs |regs |regs |regs |
| | | | | |
-----------------------------------------
Each bank has some special bank registers and it share bank0's global
control registers. this patch initialise the bank hw with the bankid.
In the hw_init, we always initialise bank0's control register since
we don't know if the bank0 is initialised.
Additionally, About each bank's register base, always delta 0x1000.
like bank[x + 1] = bank[x] + 0x1000.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-31-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for supporting multi-banks for the IOMMU HW, No functional change.
Add a new structure(mtk_iommu_bank_data) for each a bank. Each a bank have
the independent HW base/IRQ/tlb-range ops, and each a bank has its special
iommu-domain(independent pgtable), thus, also move the domain information
into it.
In previous SoC, we have only one bank which could be treated as bank0(
bankid always is 0 for the previous SoC).
After adding this structure, the tlb operations and irq could use
bank_data as parameter.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-30-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change. Just rename this for readable. Differentiate this
from mtk_iommu.c
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-29-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently there is a suspend structure in the header file. It's no need
to keep a header file only for this. Move these into the c file and rm
this header file.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-28-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for adding the structure "mtk_iommu_bank_data". No functional
change. The mtk_iommu_domain in v1 and v2 are different, we could not add
current data as bank[0] in v1 simplistically.
Currently we have no plan to add new SoC for v1, in order to avoid affect
v1 when we add many new features for v2, I totally separate v1 and v2 in
this patch, there are many structures only for v2.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-27-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change too, prepare for mt8195 IOMMU support bank functions.
Some global control settings are in bank0 while the other banks have
their bank independent setting. Here only move the global control
settings and the independent registers together.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-26-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change. Use "base" instead of the data->base. This is
avoid to touch too many lines in the next patches.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-25-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mt8195 has 3 IOMMU, containing 2 MM IOMMUs, one is for vdo, the other
is for vpp. and 1 INFRA IOMMU.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-24-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the code for of_iommu_configure_dev_id is like this:
static int of_iommu_configure_dev_id(struct device_node *master_np,
struct device *dev,
const u32 *id)
{
struct of_phandle_args iommu_spec = { .args_count = 1 };
err = of_map_id(master_np, *id, "iommu-map",
"iommu-map-mask", &iommu_spec.np,
iommu_spec.args);
...
}
It supports only one id output. BUT our PCIe HW has two ID(one is for
writing, the other is for reading). I'm not sure if we should change
of_map_id to support output MAX_PHANDLE_ARGS.
Here add the solution in ourselve drivers. If it's pcie case, enable one
more bit.
Not all infra iommu support PCIe, thus add a PCIe support flag here.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-23-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The infra iommu enable bits in mt8195 is in the pericfg register segment,
use regmap to update it.
If infra iommu master translation fault, It doesn't have the larbid/portid,
thus print out the whole register value.
Since regmap_update_bits may fail, add return value for mtk_iommu_config.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-22-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The power/clock of infra iommu is always on, and it doesn't have the
device link with the master devices, then the infra iommu device's PM
status is not active, thus we add A PM_CLK_AO flag for infra iommu.
The tlb operation is a bit not clear here, there are 2 special cases.
Comment them in the code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-21-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allow the type IOMMU_DOMAIN_UNMANAGED since vfio_iommu_type1.c always call
iommu_domain_alloc. The PCIe EP works ok when going through vfio.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-20-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For MM IOMMU, We always add device link between smi-common and IOMMU HW.
In mt8195, we add smi-sub-common. Thus, if the node is sub-common, we still
need find again to get smi-common, then do device link.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-19-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for supporting INFRA_IOMMU, and APU_IOMMU later.
For Infra IOMMU/APU IOMMU, it doesn't have the "larb""port". thus, Use
the MM flag contain the MM_IOMMU special flow, Also, it moves a big
chunk code about parsing the mediatek,larbs into a function, this is
only needed for MM IOMMU. and all the current SoC are MM_IOMMU.
The device link between iommu consumer device and smi-larb device only
is needed in MM iommu case.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-18-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add IOMMU_TYPE definition. In the mt8195, we have another IOMMU_TYPE:
infra iommu, also there will be another APU_IOMMU, thus, use 2bits for the
IOMMU_TYPE.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-17-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
