Do not try to reset the panel after DSI has been
detached, since the DSI clocks may have been disabled
at this point. The panel will be disabled and unprepared
before being removed and a reset will be done when being
probed again.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-38-tomi.valkeinen@ti.com
Now, that the driver implements the common DRM panel API
the unbind no longer needs to be suppressed.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-37-tomi.valkeinen@ti.com
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-36-tomi.valkeinen@ti.com
Implement check timings, which will check if it's possible to
configure the clocks for the provided mode using the same code
as the set_config() hook.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-35-tomi.valkeinen@ti.com
The table of compatible values needed to be prefixed with "omapdss,"
is empty, so all of this code is doing nothing now. Let's drop it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-34-tomi.valkeinen@ti.com
Due to previous changes the DSI encoder gets the capabilities
via DSI client's mode_flags and no longer needs the omapdss
specific caps. The core code now checks if the DSI encoder
is actually configured into command mode instead of just checking
the panel capabilities.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-32-tomi.valkeinen@ti.com
Complete the direction reversal of the DSS device enable/disable
operations started by commit 19b4200d8f ("drm/omap: Reverse direction
of the DSS device enable/disable operations").
This effectively drops the requirement of calling DSS specific
code from the DSI panel driver moving it a bit further to a
standard drm_panel driver.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-31-tomi.valkeinen@ti.com
Move ULPS handling into the DSI host controller, so that we
no longer need a custom API for the DSI client.
Note that for now ULPS is always disabled.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-29-tomi.valkeinen@ti.com
Create a custom function pointer for ULPS and use it instead of
reusing disable/enable functions for ULPS mode switch. This allows
us to use the common disable/enable functions pointers for DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-28-tomi.valkeinen@ti.com
Instead of using the custom enable_te() API, this automatically
enables/disables TE core support when a matching packet is sent
to the panel.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-26-tomi.valkeinen@ti.com
In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.
The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-25-tomi.valkeinen@ti.com
Integrate low-power / high-speed bus switching into transfer
function and drop the omapdrm specific enable_hs() callback.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com
Use bulk regulator API to simplify the code. This also switches
from _optional variant to normal variant, which will provide a
dummy regulator (i.e. if some always-enabled regulator is not
described in DT).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-23-tomi.valkeinen@ti.com
The DSI sync() function only locks the bus and then releases
it again. Currently the only invocation is directly before
update(), which locks the bus anyways.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-21-tomi.valkeinen@ti.com
Drop custom request_vc/release_vc callbacks by using the
generic mipi_dsi_attach/mipi_dsi_detach functions.
To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields,
and some of these fields overlap with the fields in omap_dss_dsi_config.
In later patches the latter will get dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com
After converting the driver to mipi_dsi_device we can use the generic
message helpers to simplify the driver a lot.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-14-tomi.valkeinen@ti.com
This moves from custom platform driver infrastructure to mipi_dsi_host
and mipi_dsi_device. Note, that this is a graduate step and the driver
only uses the devices types and transfer function, but not yet the new
device binding style or drm_panel.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com
Simplify the DSI encoder by using mipi_dsi_msg for
dsi_vc_send_long and dsi_vc_send_short. Further improvements
require cleaning up the channel allocation code first.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-12-tomi.valkeinen@ti.com
Simplify the read related message handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-11-tomi.valkeinen@ti.com
Simplify the write related messages handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-10-tomi.valkeinen@ti.com
This drops the virtual channel logic. Afterwards DSI clients
request their channel number and get the virtual channel with
the same number or -EBUSY if already in use.
The change here is not strictly speaking correct, as it combines the VC
(DSI's "configuration block") and virtual channel ID (the ID sent in the
DSI packets). But as we currently only support a single DSI command mode
panel, this works fine: we always use VC0, and VC ID 0.
This needs more work to support video mode panels, but that can be done
after moving to DRM bridge and panel model, after which we can do that
work with the proper APIs.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-9-tomi.valkeinen@ti.com
This converts the panel-dsi-cm driver to use the transfer
API instead of specific functions, so that the specific
functions can be unexported and squashed into the generic
transfer function.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-7-tomi.valkeinen@ti.com
This prepares the driver for becoming a mipi_dsi_host implementation,
which provides a generic transfer function instead of all kind of
different read/write functions. The implementation will become more
elegant after unexporting the specific functions in the following
patches.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-6-tomi.valkeinen@ti.com
The panel-dsi-cm's ddata->pin_config is always NULL, so this
callback is never called. Instead the DSI encoder gets the pin
configuration directly from DT.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-3-tomi.valkeinen@ti.com
This reverts commit e086558ae9 ("drm/omap: dss: Remove unused
omap_dss_device operations")
This is still needed by DSI. E.g. unloading modules without this will
cause a crash.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-2-tomi.valkeinen@ti.com
Adds support for COLOR_ENCODING and COLOR_RANGE properties to
omap_plane.c and dispc.c. The supported encodings and ranges are
presets are:
For COLOR_ENCODING:
- YCbCr BT.601 (default)
- YCbCr BT.709
For COLOR_RANGE:
- YCbCr limited range
- YCbCr full range (default)
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-6-tomi.valkeinen@ti.com
Implement CTM color management property for OMAP CRTC using DSS
overlay manager's Color Phase Rotation matrix. The CPR matrix does not
exactly match the CTM property documentation. On DSS the CPR matrix is
applied after gamma table look up. However, it seems stupid to add a
custom property just for that.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-4-tomi.valkeinen@ti.com
omapdrm supports gamma via GAMMA_LUT property. However, the HW we have
is:
gamma -> ctm -> out
instead of what the model DRM framework uses:
ctm -> gamma -> out
As the following patches add CTM support for omapdrm, lets first fix the
gamma.
This patch changes the property from GAMMA_LUT to DEGAMMA_LUT, and thus
we will have:
degamma -> ctm -> out
and the legacy ioctl will continue working as before.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-3-tomi.valkeinen@ti.com
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support
-----BEGIN PGP SIGNATURE-----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=c9rl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
Mapping the imported pages of a DMA-buf into an userspace process
doesn't work as expected.
But we have reoccurring requests on this approach, so split the
functions for this and document that dma_buf_mmap() needs to be used
instead.
v2: split it into two functions
v3: rebased on latest changes
v4: update commit message a bit
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403838/
When the SDI output was converted to DRM bridge, the atomic versions of
enable and disable funcs were used. This was not intended, as that would
require implementing other atomic funcs too. This leads to:
WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268
and display not working.
Fix this by using the legacy enable/disable funcs.
Fixes: 8bef8a6d5d ("drm/omap: sdi: Register a drm_bridge")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20201127085241.848461-1-tomi.valkeinen@ti.com
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
v5: move vma_set_file to mm/util.c
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399360/
pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of its
direct wrappers in omapdrm assume that PM usage counter will
not change on error. Thus a pairing decrement is needed on
the error handling path for these wrappers to keep the counter
balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200822065743.13671-1-dinghao.liu@zju.edu.cn
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713122859.34135-1-grandmaster@al2klimov.de
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’:
drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’:
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable]
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org
The API has been updated, but the header was not.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-5-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob@ti.com>
Cc: Andy Gross <andy.gross@ti.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-10-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-9-lee.jones@linaro.org
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
The kernel test robot is not happy with that.
This reverts commit 2b5b95b1ff.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/394773/
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/394773/
Now that atomic_check takes the global atomic state as a parameter, we
don't need to go through the pointer in the CRTC state.
This was done using the following coccinelle script:
@ crtc_atomic_func @
identifier helpers;
identifier func;
@@
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
identifier crtc_atomic_func.func;
identifier crtc, state;
@@
func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
...
- struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
... when != crtc_state
- crtc_state->state
+ state
...
}
@@
struct drm_crtc_state *crtc_state;
identifier crtc_atomic_func.func;
identifier crtc, state;
@@
func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
...
- crtc_state->state
+ state
...
}
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102133834.1176740-3-maxime@cerno.tech
GEM object functions deprecate several similar callback interfaces in
struct drm_driver. This patch replaces the per-driver callbacks with
per-instance callbacks in omapdrm.
v2:
* make omap_gem_free_object() static (Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-12-tzimmermann@suse.de
Please pull a set of fixes for various DRM drivers that finally resolve
incorrect usage of the scatterlists (struct sg_table nents and orig_nents
entries), what causes issues when IOMMU is used.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910080505.24456-1-m.szyprowski@samsung.com
Use common helper for converting a sg_table object into struct
page pointer array.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into drm-next
Backmerge 5.9-rc4 as there is a nasty qxl conflict
that needs to be resolved.
Signed-off-by: Dave Airlie <airlied@redhat.com>
core:
- Take modeset bkl for legacy drivers.
dp_mst:
- Allow null crtc in dp_mst.
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning.
omap:
- locking state fix.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJfSGXpAAoJEAx081l5xIa+bs4QAJ6dQb0Llv9TyUBZL/FTTbc2
iv8PDzA55aoBn7qI00mkUN9M9elfAV75dfLcn9h1fJg/EN3UZXkPCxFAcsscN+gm
0TXTU9SmgqeDDK2RFxyvSGbuJbfuoOiXMbERdd+sYupUh7FowckDFVrOvbRcEe//
PX3klUuQRSRxsgShrruJjaLdpqA+saZ12fhoE3eagsvlaFFAuVz8GY2zj533yaw9
zjgDTkOWiO4Lw2/X10dmjEoxa5Nn26ECF4y+iFih7Uw2e+tu+ZVaL+/PcVPlJk5a
NdlDAgU1gS8U9c0lSbrLNGGwBRXj1899FIRMS55uLwIBSmdZlOkh/wEOmnC+c1uK
kbrUfYlU6dXLjzUOTd2d8GQx3F9OTFxOXoZjshMYlryf2RsVl4kImBlpdAC3TT7p
B/Qk4xbU3uOuDzMgF76b1wT5XiFoHKcPrxNcf5L1tkqULdmYioB78hs4uQij5Bh0
p6ynfR8rb19J4m+ctI84HqfG6ZbloBgGDZLzIe37lHsvG6xKG7/VjcclBV9BHBXs
mgG0h+CeogY14a9JWeZ2dQFH8wT77QT5G0/ODQo1r9+OXM1i10DGCZyihrNJf2Nl
//4uIDlgq695Lxd+h7FMuupWLpvAvnooDaUvnnNfVGsQVFsEhagl3R+TCGaFULHJ
hi1vfCSZEBV+tCeiKSRU
=ZmIT
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
one msm patch was from the merge window, but had dependencies and we
dropped it until the other tree had landed. Otherwise it's a couple of
fixes for core, and etnaviv, and single i915, exynos, omap fixes.
I'm still tracking the Sandybridge gpu relocations issue, if we don't
see much movement I might just queue up the reverts. I'll talk to
Daniel next week once he's back from holidays.
core:
- Take modeset bkl for legacy drivers
dp_mst:
- Allow null crtc in dp_mst
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning
omap:
- locking state fix"
* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
drm/amdgpu: disable runtime pm for navy_flounder
drm/amd/display: Retry AUX write when fail occurs
drm/amdgpu: Fix buffer overflow in INFO ioctl
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
drm/amdgpu: use MODE1 reset for navy_flounder by default
drm/amd/pm: correct the thermal alert temperature limit settings
drm/amdgpu: add asd fw check before loading asd
drm/amd/display: Keep current gain when ABM disable immediately
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
drm/amd/display: Revert HDCP disable sequence change
drm/amd/display: Send DISPLAY_OFF after power down on boot
drm/amdgpu/gfx10: refine mgcg setting
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
drm/amd/pm: set VCN pg per instances
drm/amd/pm: enable run_btc callback for sienna_cichlid
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
drm/amd/display: Reject overlay plane configurations in multi-display scenarios
...
After commit 92cc68e358 ("drm/vblank: Use
spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken:
WARNING: inconsistent lock state
5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm]
{HARDIRQ-ON-W} state was registered at:
trace_hardirqs_on+0x9c/0x1ec
_raw_spin_unlock_irq+0x20/0x58
omap_crtc_atomic_enable+0x54/0xa0 [omapdrm]
drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper]
omap_atomic_commit_tail+0x48/0xc4 [omapdrm]
commit_tail+0x9c/0x190 [drm_kms_helper]
drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper]
drm_client_modeset_commit_atomic+0x228/0x268 [drm]
drm_client_modeset_commit_locked+0x60/0x1d0 [drm]
drm_client_modeset_commit+0x24/0x40 [drm]
drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper]
drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper]
drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper]
drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper]
output_poll_execute+0x1a8/0x1c0 [drm_kms_helper]
process_one_work+0x268/0x800
worker_thread+0x30/0x4e0
kthread+0x164/0x190
ret_from_fork+0x14/0x20
The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().
It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The OMAP DRM driver includes <linux/gpio.h> into the two
hdmi4.c and hdmi5.c files but does not use any symbols from
these files. Drop the includes.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl8pWYUACgkQaA3BHVML
eiNGkAf+Lw+DXDm1C9cpSm2oj9XFiwUBI25G+4aDn6+3o5YAdkWGkVSSqb8wXzaL
XTE8iMmCfsz/LXGIHGa3lOhhwj/zXMOH+Eg9xt+vXvYFuaoOUxeCSz8WiRg7bNwx
gfaQvsX+2lVBkfcyn8s8NEJOBvKSzRl3JQcUrY3QWnvUZcM37E4NueZOkeygAqFl
Jjcq6DdQOskUOzkQb+6lxDtiBJQZ6jTZWIcIW9Ec8Xc6VqsxuKLM3iv17Lo+5qbj
1Enj1YBnOwK8Rs3AvhvB8vRJ/y1MBImnc3bheLxTGZ5NAsxwLarg0jRqzSsxuDOS
t9xz3voeyYUVHN91uaIRENIyqfvtkg==
=gN9V
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-08-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
* backmerge from drm-fixes at v5.8-rc7
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804125510.GA29670@linux-uq9g
These functions are now empty and no longer
useful so remove the functions and their uses.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bernard Zhao <bernard@vivo.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Icenowy Zheng <icenowy@aosc.io>,
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: dri-devel@lists.freedesktop.org,
Cc: linux-kernel@vger.kernel.org
Cc: opensource.kernel@vivo.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings
Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM
suspend and resume.
We use suspend late version so that omapdrm's system suspend callback is
called first, as that will disable all the display outputs after which
it's safe to force DSS into suspend.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Fixes: cef7663003 ("drm/omap: Prepare DSS for probing without legacy platform data")
Cc: stable@vger.kernel.org # v5.7+
Tested-by: Tony Lindgren <tony@atomide.com>
The first member of drm_display_mode is no longer a structure, but
the code is still using {{0}} to zero initialize it. Make that just
{} so it works regardless of what lies inside.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 42acb06b01 ("drm: pahole struct drm_display_mode")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200724190718.23567-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch.ch>
Only when vblanks are supported ofc.
Some drivers do this already, but most unfortunately missed it. This
opens up bugs after driver load, before the crtc is enabled for the
first time. syzbot spotted this when loading vkms as a secondary
output. Given how many drivers are buggy it's best to solve this once
and for all in shared helper code.
Aside from moving the few existing calls to drm_crtc_vblank_reset into
helpers (i915 doesn't use helpers, so keeps its own) I think the
regression risk is minimal: atomic helpers already rely on drivers
calling drm_crtc_vblank_on/off correctly in their hooks when they
support vblanks. And driver that's failing to handle vblanks after
this is missing those calls already, and vblanks could only work by
accident when enabling a CRTC for the first time right after boot.
Big thanks to Tetsuo for helping track down what's going wrong here.
There's only a few drivers which already had the necessary call and
needed some updating:
- komeda, atmel and tidss also needed to be changed to call
__drm_atomic_helper_crtc_reset() intead of open coding it
- tegra and msm even had it in the same place already, just code
motion, and malidp already uses __drm_atomic_helper_crtc_reset().
- Laurent noticed that rcar-du and omap open-code their crtc reset and
hence would actually be broken by this patch now. So fix them up by
reusing the helpers, which brings the drm_crtc_vblank_reset() back.
Only call left is in i915, which doesn't use drm_mode_config_reset,
but has its own fastboot infrastructure. So that's the only case where
we actually want this in the driver still.
I've also reviewed all other drivers which set up vblank support with
drm_vblank_init. After the previous patch fixing mxsfb all atomic
drivers do call drm_crtc_vblank_on/off as they should, the remaining
drivers are either legacy kms or legacy dri1 drivers, so not affected
by this change to atomic helpers.
v2: Use the drm_dev_has_vblank() helper.
v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off
instead of drm_crtc_vblank_reset. Adjust them too.
v4: Laurent noticed that rcar-du and omap open-code their crtc reset
and hence would actually be broken by this patch now. So fix them up
by reusing the helpers, which brings the drm_crtc_vblank_reset() back.
v5: also mention rcar-du and ompadrm in the proper commit message
above (Laurent).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cb
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tegra@vger.kernel.org
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-1-daniel.vetter@ffwll.ch
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
-----BEGIN PGP SIGNATURE-----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=ZmKI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
When validating a mode, bridges may need to do so in the context of a
display, as specified by drm_display_info. An example is the meson
dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to
perform clock calculations.
Bridges that need the display info currently retrieve it from the
drm_connector created by the bridge. This gets in the way of moving
connector creation out of bridge drivers. To make this possible, pass
the drm_display_info to drm_bridge_funcs .mode_valid().
Changes to the bridge drivers have been performed with the following
coccinelle semantic patch and have been compile-tested.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.mode_valid = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
identifier mode;
@@
enum drm_mode_status fn(
struct drm_bridge *bridge,
+ const struct drm_display_info *info,
const struct drm_display_mode *mode
)
{
...
}
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part:
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Spelling out _unlocked for each and every driver is a annoying.
Especially if we consider how many drivers, do not know (or need to)
about the horror stories involving struct_mutex.
Just drop the suffix. It makes the API cleaner.
Done via the following script:
__from=drm_gem_object_put_unlocked
__to=drm_gem_object_put
for __file in $(git grep --name-only $__from); do
sed -i "s/$__from/$__to/g" $__file;
done
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-27-emil.l.velikov@gmail.com
Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Zheng Bin <zhengbin13@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Enrico Weigelt <info@metux.net>
Cc: Allison Randal <allison@lohutok.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514191001.457441-2-sam@ravnborg.org
If the given videomode does not specify DISPLAY_FLAG_* for the specific
signal property, the driver used a default value. These defaults were
never thought through, as the expectation was that all the DISPLAY_FLAGS
are always set explicitly.
With DRM bridge and panel drivers this is not the case, and while that
issue should be resolved in the future, it's still good to have sane
signal defaults.
This patch changes the defaults to what the hardware has as reset
defaults. Also, based on my experience, I think they make sense and are
more likely correct than the defaults without this patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114151.25843-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
drivers/gpu/drm/omapdrm/dss/venc.c:211:33:
warning: 'venc_config_pal_bdghi' defined but not used [-Wunused-const-variable=]
static const struct venc_config venc_config_pal_bdghi = {
^~~~~~~~~~~~~~~~~~~~~
It is never used, remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415132105.43636-1-yuehaibing@huawei.com
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
As a result of commit 987d65d013 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.
This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.
v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com
Since 987d65d013 (drm: debugfs: make
drm_debugfs_create_files() never fail), there is no need to ever check
the return value for drm_debugfs_create_files(). Therefore remove the
checks for the return value and subsequent error handling in
omap_debugfs_init().
These changes also enables the changing of omap_debugfs_init() to return
0 directly.
v2: convert omap_debugfs_init() to return 0 instead of void to avoid
introduction of build issues and enable individual driver compilation.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-14-wambui.karugax@gmail.com
drm_fb_helper_{add,remove}_one_connector() and
drm_fb_helper_single_add_all_connectors() are dummy functions now
and serve no purpose. Hence remove their calls.
This is the preparatory step for removing the
drm_fb_helper_{add,remove}_one_connector() functions from
drm_fb_helper.h
This removal is done using below sementic patch and unused variable
compilation warnings are fixed manually.
@@
@@
- drm_fb_helper_single_add_all_connectors(...);
@@
expression e1;
statement S;
@@
- e1 = drm_fb_helper_single_add_all_connectors(...);
- S
@@
@@
- drm_fb_helper_add_one_connector(...);
@@
@@
- drm_fb_helper_remove_one_connector(...);
Changes since v1:
* Squashed warning fixes into the patch that introduced the
warnings (into 5/7) (Laurent, Emil, Lyude)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
The max connector argument for drm_fb_helper_init() isn't used anymore
hence remove it.
All the drm_fb_helper_init() calls are modified with below sementic
patch.
@@
expression E1, E2, E3;
@@
- drm_fb_helper_init(E1,E2, E3)
+ drm_fb_helper_init(E1,E2)
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-2-pankaj.laxminarayan.bharadiya@intel.com
In order to probe display subsystem (DSS) components with ti-sysc
interconnect target module without legacy platform data and using
devicetree, we need to update dss probing a bit.
In the device tree, we will be defining the data also for the interconnect
target modules as DSS really is a private interconnect. There is some
information about that in 4460 TRM in "Figure 10-3. DSS Integration" for
example where it mentions "32-bit interconnect (SLX)".
The changes we need to make are:
1. Parse also device tree subnodes for the compatible property fixup
2. Update the component code to consider device tree subnodes
Cc: dri-devel@lists.freedesktop.org
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap_dss_device .pre_enable(), .post_disable() and .set_timings()
are not used anymore. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-55-laurent.pinchart@ideasonboard.com
The omapdss_of_find_connected_device() function isn't used anymore,
remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-54-laurent.pinchart@ideasonboard.com
Inline the omapdss_display_get() in its only caller to simplify the
code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-53-laurent.pinchart@ideasonboard.com
The omap_connector implementation is now used for DSI only. Hardcode its
type and drop unused code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-52-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal SDI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-51-laurent.pinchart@ideasonboard.com
This makes it easier to quickly locate duplicate includes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-50-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal DPI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-49-laurent.pinchart@ideasonboard.com
The dpi_set_pll_clk() and dpi_set_dispc_clk() return various information
through pointer arguments that are never used by the callers. Remove
them to simplify the clock setting API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-48-laurent.pinchart@ideasonboard.com
Group functions based on their purpose and split them in sections to
make the source code easier to navigate.
No functional change is included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-47-laurent.pinchart@ideasonboard.com
This makes it easier to quickly locate duplicate includes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-46-laurent.pinchart@ideasonboard.com
Now that the omap_dss_device EDID read operation has been removed,
simplify the bridge-based EDID access by merging multiple functions
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-45-laurent.pinchart@ideasonboard.com
Now that the omap_dss_device EDID read operation has been removed,
simplify the bridge-based EDID access by merging multiple functions
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-44-laurent.pinchart@ideasonboard.com
Now that the VENC output is driven fully through the drm_bridge API its
omap_dss_device operations are not used anymore. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-43-laurent.pinchart@ideasonboard.com
Now that the HDMI outputs are driven fully through the drm_bridge API
their omap_dss_device operations are not used anymore. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-42-laurent.pinchart@ideasonboard.com
Due to the removal of several omapdrm display drivers, the omapdss HPD,
detected and EDID operations are not used anymore. Remove them and all
related code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-41-laurent.pinchart@ideasonboard.com
The TPD12S015, OPA362 and analog and HDMI connectors are now supported
by DRM bridge drivers, and the omapdrm HDMI and VENC outputs can be
handled through the drm_bridge API. Switch the outputs to drm_bridge by
making the next bridge mandatory and removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-40-laurent.pinchart@ideasonboard.com
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-39-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal VENC
encoder has to expose the mode valid, fixup and set, the enable and
disable and the get modes operations through the drm_bridge API.
Register a bridge at initialisation time to do so.
Most of those operations are removed from the omap_dss_device as they
are now called through the drm_bridge API by the DRM atomic helpers. The
only exception is the .get_modes() operation that is still invoked
through the omap_dss_device-based pipeline.
For the time being make the next bridge in the chain optional as the
VENC output is still based on omap_dss_device. The create_connector
argument to the bridge attach function is also ignored for the same
reason. This will be changed later when removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-38-laurent.pinchart@ideasonboard.com
The omapdss_hdmi_ops .set_hdmi_mode() and .set_infoframe() operations
operations are not used anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-37-laurent.pinchart@ideasonboard.com
The HDMI4 encoder is transitioning to the drm_bridge API, implement the
last missing operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-36-laurent.pinchart@ideasonboard.com
Move the omap_dss_device .set_timings(), .enable() and .disable()
operations to the drm_bridge functions. As the drm_bridge for the HDMI
encoder is unconditionally registered and attached, those operations
will be called at the appropriate time.
The omapdss device .set_infoframe() and .set_hdmi_mode() operations have
no equivalent in drm_bridge. Thir content is thus moved to the bridge
.enable() operation as the data they store is not needed before the HDMI
encoder gets enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-35-laurent.pinchart@ideasonboard.com
Move the omap_dss_device .set_timings(), .enable() and .disable()
operations to the drm_bridge functions. As the drm_bridge for the HDMI
encoder is unconditionally registered and attached, those operations
will be called at the appropriate time.
The omapdss device .set_infoframe() and .set_hdmi_mode() operations have
no equivalent in drm_bridge. Thir content is thus moved to the bridge
.enable() operation as the data they store is not needed before the HDMI
encoder gets enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-34-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal HDMI5
encoder has to expose the EDID read operation through the drm_bridge
API. Register a bridge at initialisation time to do so.
For the time being make the next bridge in the chain optional as the
HDMI output is still based on omap_dss_device. The create_connector
argument to the bridge attach function is also ignored for the same
reason. This will be changed later when removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-33-laurent.pinchart@ideasonboard.com
In order to integrate with a chain of drm_bridge, the internal HDMI4
encoder has to expose the EDID read operation through the drm_bridge
API. Register a bridge at initialisation time to do so.
For the time being make the next bridge in the chain optional as the
HDMI output is still based on omap_dss_device. The create_connector
argument to the bridge attach function is also ignored for the same
reason. This will be changed later when removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-32-laurent.pinchart@ideasonboard.com
In preparation of adding DRM bridge support to the hdmi5 encoder code,
rework the EDID read to isolate data read.
The hdmi_read_edid() function is the main entry point. It performs all
initialisation steps required prior to reading the EDID (such as
ensuring the device is powered on), as well as corresponding cleanup
steps afterwards. EDID read itself is handled by hdmi_read_edid_data()
that calls the hdmi5_core_ddc_read() function to read individual blocks.
This new code architecture will allow reusing hdmi_read_edid() and
hdmi5_core_ddc_read() for the drm_bridge EDID read implementation, while
swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-31-laurent.pinchart@ideasonboard.com
In preparation of adding DRM bridge support to the hdmi4 encoder code,
rework the EDID read to isolate data read.
The hdmi_read_edid() function is the main entry point. It performs all
initialisation steps required prior to reading the EDID (such as
ensuring the device is powered on), as well as corresponding cleanup
steps afterwards. EDID read itself is handled by hdmi_read_edid_data()
that calls the hdmi4_core_ddc_read() function to read individual blocks.
This new code architecture will allow reusing hdmi_read_edid() and
hdmi4_core_ddc_read() for the drm_bridge EDID read implementation, while
swapping out hdmi_read_edid_data() for the DRM drm_do_get_edid()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-30-laurent.pinchart@ideasonboard.com
Bring the omapdss-specific .read_edid() operation in sync with the
drm_bridge .get_edid() operation to ease code reuse.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-29-laurent.pinchart@ideasonboard.com
As part of the move to drm_bridge ops, the dssdev ops will become empty
for some of the internal encoders. Make them optional in the driver to
allow them to be removed completely, easing the transition.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-28-laurent.pinchart@ideasonboard.com
In order to support drm_bridge-based pipeline, the internal HDMI
encoders will need to expose the EDID read operation through the
drm_bridge API, and thus to expose a drm_bridge instance corresponding
to the encoder. The HDMI encoders are however handled as omap_dss_device
instances, which conflicts with this requirement.
In order to move forward with the drm_bridge transition, add support for
creating drm_bridge instances local to DSS outputs. If a local bridge is
passed to the omapdss_device_init_output() function, it is used as the
first bridge in the chain, and the omap_dss_device.next_bridge field is
set to the next bridge for the use of the internal encoders' bridges.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-27-laurent.pinchart@ideasonboard.com
The DSS core looks up the next device connected to an output by
traversing the OF graph. It currently hardcodes the local port number to
0, which breaks any output with a different port number (SDI on OMAP3
and any DPI output but the first one). Fix this by repurposing the
currently unused of_ports bitmask in omap_dss_device with an of_port
output port number, and use it to traverse the OF graph.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-26-laurent.pinchart@ideasonboard.com
Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-25-laurent.pinchart@ideasonboard.com
Move the code that computes the DRM connector type for the
omapdss_device display type to a new omapdss_device_connector_type()
function for later reuse.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-24-laurent.pinchart@ideasonboard.com
Remove the omap_connector_get_hdmi_mode() function as the HDMI mode can
be accessed directly from the connector's display info.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-23-laurent.pinchart@ideasonboard.com
When the DSS initialises its output DPI and SDI ports, failures don't
clean up previous successfully initialised ports. This can lead to
resource leak or memory corruption. Fix it.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-22-laurent.pinchart@ideasonboard.com
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.
The change is based on the following semantic patch, with manual review
and edits.
@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};
@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}
@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}
@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
The call to of_find_matching_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn
Instead of dma_dev->device_prep_dma_memcpy() use the existing macro to
prepare the memcpy.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731094233.13890-2-peter.ujfalusi@ti.com
Fixes coccicheck warning:
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c:681:1-15: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c:732:1-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579763123-62749-1-git-send-email-zhengbin13@huawei.com
Since the if statement only checks for the value of the `id` variable,
it can be replaced by the more concise BUG_ON() macro for error
reporting.
Issue found using coccinelle.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102095515.7106-1-wambui.karugax@gmail.com
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
And use it in drivers accessing the bridge->next field directly.
This is part of our attempt to make the bridge chain a double-linked list
based on the generic list helpers.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-3-boris.brezillon@collabora.com
cec4fa7511 ("drm/omap: use refcount API to
track the number of users of dma_addr") changed omap_gem.c to use
refcounting API to track dma_addr uses. However, the driver only tracks
the refcounts for non-contiguous buffers, and the patch didn't fully
take this in account.
After the patch, the driver always decreased refcount in omap_gem_unpin,
instead of decreasing the refcount only for non-contiguous buffers. This
leads to refcounting mismatch.
As for the contiguous cases the refcount is never increased, fix this
issue by returning from omap_gem_unpin if the buffer being unpinned is
contiguous.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114080343.30704-1-tomi.valkeinen@ti.com
Fixes: cec4fa7511 ("drm/omap: use refcount API to track the number of users of dma_addr")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
No in-tree users left.
Note that this is one of the few (if only) implementations of dma-buf
that provided a kmap, but not a vmap implemenation. Given that the
only real user (in-tree at least) of kmap was tegra, and it's
impossible to buy a chip with tegra host1x and ompadrm on the same
SoC, there's no problem here.
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-8-daniel.vetter@ffwll.ch
Parroting Daniel's backmerge justification from
2e79e22e09:
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/dss/hdmi4_core.c: In function hdmi4_audio_config:
drivers/gpu/drm/omapdrm/dss/hdmi4_core.c:689:6: warning: variable err set but not used [-Wunused-but-set-variable]
It is not used since commit f5bab22291 ("OMAPDSS:
HDMI: Add OMAP5 HDMI support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1570518949-47574-5-git-send-email-zhengbin13@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/dss/hdmi5_core.c: In function hdmi5_audio_config:
drivers/gpu/drm/omapdrm/dss/hdmi5_core.c:812:6: warning: variable err set but not used [-Wunused-but-set-variable]
It is not used since commit f5bab22291 ("OMAPDSS:
HDMI: Add OMAP5 HDMI support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1570518949-47574-4-git-send-email-zhengbin13@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/dss/dsi.c: In function dsi_proto_timings:
drivers/gpu/drm/omapdrm/dss/dsi.c:3562:46: warning: variable tclk_trail set but not used [-Wunused-but-set-variable]
It is not used since commit 9960aa7cb5 ("drm/omap:
move omapdss & displays under omapdrm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1570518949-47574-3-git-send-email-zhengbin13@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/omapdrm/omap_fb.c: In function omap_framebuffer_update_scanout:
drivers/gpu/drm/omapdrm/omap_fb.c:130:16: warning: variable plane set but not used [-Wunused-but-set-variable]
It is not used since commit 2ecceeb53b ("drm/omap:
Move buffer pitch/offset to drm_framebuffer")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1570518949-47574-2-git-send-email-zhengbin13@huawei.com
On SoCs with DMM/TILER, we have two ways to allocate buffers: normal
dma_alloc or via DMM (which basically functions as an IOMMU). DMM can
map 128MB at a time, and we only map the DMM buffers when they are used
(i.e. not at alloc time). If DMM is present, omapdrm always uses DMM.
There are use cases that require lots of big buffers that are being used
at the same time by different IPs. At the moment the userspace has a
hard maximum of 128MB.
This patch adds three new flags that can be used by the userspace to
solve the situation:
OMAP_BO_MEM_CONTIG: The driver will use dma_alloc to get the memory.
This can be used to avoid DMM if the userspace knows it needs more than
128M of memory at the same time.
OMAP_BO_MEM_DMM: The driver will use DMM to get the memory. There's not
much use for this flag at the moment, as on platforms with DMM it is
used by default, but it's here for completeness.
OMAP_BO_MEM_PIN: The driver will pin the memory at alloc time, and keep
it pinned. This can be used to 1) get an error at alloc time if DMM
space is full, and 2) get rid of the constant pin/unpin operations which
may have some effect on performance.
If none of the flags are given, the behavior is the same as currently.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-9-jjhiblot@ti.com
Add a helper function omap_gem_validate_flags() which validates the
omap_bo flags passed from the userspace.
Also drop the dev_err() message, as the userspace can cause that at
will.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-8-jjhiblot@ti.com
omap_gem_new() has a comment about OMAP_BO_SCANOUT which does not make
sense. Also, for the TILER case, we drop OMAP_BO_SCANOUT flag for some
reason.
It's not clear what the original purpose of OMAP_BO_SCANOUT is, but
presuming it means "scanout buffer, something that can be consumed by
DSS", this patch cleans up the above issues.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-7-jjhiblot@ti.com
