forked from Minki/linux
master
193 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Kefeng Wang
|
639118d157 |
mm: kill is_memblock_offlined()
Directly check state of struct memory_block, no need a single function. Link: https://lkml.kernel.org/r/20220827112043.187028-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
zhenwei pi
|
67f22ba775 |
mm/memory-failure: disable unpoison once hw error happens
Currently unpoison_memory(unsigned long pfn) is designed for soft poison(hwpoison-inject) only. Since |
||
Christophe JAILLET
|
f47f758cff |
drivers/base/memory: fix an unlikely reference counting issue in __add_memory_block()
__add_memory_block() calls both put_device() and device_unregister() when
storing the memory block into the xarray. This is incorrect because
xarray doesn't take an additional reference and device_unregister()
already calls put_device().
Triggering the issue looks really unlikely and its only effect should be
to log a spurious warning about a ref counted issue.
Link: https://lkml.kernel.org/r/d44c63d78affe844f020dc02ad6af29abc448fc4.1650611702.git.christophe.jaillet@wanadoo.fr
Fixes:
|
||
David Hildenbrand
|
2aa065f7af |
drivers/base/memory: clarify adding and removing of memory blocks
Let's make it clearer at which places we actually add and remove memory blocks -- streamlining the terminology -- and highlight which memory block start out online and which start out as offline. * rename add_memory_block -> add_boot_memory_block * rename init_memory_block -> add_memory_block * rename unregister_memory -> remove_memory_block * rename register_memory -> __add_memory_block * add add_hotplug_memory_block * mark add_boot_memory_block with __init (suggested by Oscar) __add_memory_block() is a pure helper for add_memory_block(), remove the somewhat obvious comment. Link: https://lkml.kernel.org/r/20220221154531.11382-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
395f6081ba |
drivers/base/memory: determine and store zone for single-zone memory blocks
test_pages_in_a_zone() is just another nasty PFN walker that can easily stumble over ZONE_DEVICE memory ranges falling into the same memory block as ordinary system RAM: the memmap of parts of these ranges might possibly be uninitialized. In fact, we observed (on an older kernel) with UBSAN: UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50 index 7 is out of range for type 'zone [5]' CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...] Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019 Call Trace: dump_stack+0x9a/0xf0 ubsan_epilogue+0x9/0x7a __ubsan_handle_out_of_bounds+0x13a/0x181 test_pages_in_a_zone+0x3c4/0x500 show_valid_zones+0x1fa/0x380 dev_attr_show+0x43/0xb0 sysfs_kf_seq_show+0x1c5/0x440 seq_read+0x49d/0x1190 vfs_read+0xff/0x300 ksys_read+0xb8/0x170 do_syscall_64+0xa5/0x4b0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf RIP: 0033:0x7f01f4439b52 We seem to stumble over a memmap that contains a garbage zone id. While we could try inserting pfn_to_online_page() calls, it will just make memory offlining slower, because we use test_pages_in_a_zone() to make sure we're offlining pages that all belong to the same zone. Let's just get rid of this PFN walker and determine the single zone of a memory block -- if any -- for early memory blocks during boot. For memory onlining, we know the single zone already. Let's avoid any additional memmap scanning and just rely on the zone information available during boot. For memory hot(un)plug, we only really care about memory blocks that: * span a single zone (and, thereby, a single node) * are completely System RAM (IOW, no holes, no ZONE_DEVICE) If one of these conditions is not met, we reject memory offlining. Hotplugged memory blocks (starting out offline), always meet both conditions. There are three scenarios to handle: (1) Memory hot(un)plug A memory block with zone == NULL cannot be offlined, corresponding to our previous test_pages_in_a_zone() check. After successful memory onlining/offlining, we simply set the zone accordingly. * Memory onlining: set the zone we just used for onlining * Memory offlining: set zone = NULL So a hotplugged memory block starts with zone = NULL. Once memory onlining is done, we set the proper zone. (2) Boot memory with !CONFIG_NUMA We know that there is just a single pgdat, so we simply scan all zones of that pgdat for an intersection with our memory block PFN range when adding the memory block. If more than one zone intersects (e.g., DMA and DMA32 on x86 for the first memory block) we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. (3) Boot memory with CONFIG_NUMA At the point in time we create the memory block devices during boot, we don't know yet which nodes *actually* span a memory block. While we could scan all zones of all nodes for intersections, overlapping nodes complicate the situation and scanning all nodes is possibly expensive. But that problem has already been solved by the code that sets the node of a memory block and creates the link in the sysfs -- do_register_memory_block_under_node(). So, we hook into the code that sets the node id for a memory block. If we already have a different node id set for the memory block, we know that multiple nodes *actually* have PFNs falling into our memory block: we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. If there is no node id set, we do the same as (2) for the given node. Note that the call order in driver_init() is: -> memory_dev_init(): create memory block devices -> node_dev_init(): link memory block devices to the node and set the node id So in summary, we detect if there is a single zone responsible for this memory block and we consequently store the zone in that case in the memory block, updating it during memory onlining/offlining. Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Rafael Parra <rparrazo@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rafael Parra <rparrazo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
7ea0d2d79d |
drivers/base/memory: add memory block to memory group after registration succeeded
If register_memory() fails, we freed the memory block but already added
the memory block to the group list, not good. Let's defer adding the
block to the memory group to after registering the memory block device.
We do handle it properly during unregister_memory(), but that's not
called when the registration fails.
Link: https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com
Fixes:
|
||
luofei
|
d1fe111fb6 |
mm/hwpoison: avoid the impact of hwpoison_filter() return value on mce handler
When the hwpoison page meets the filter conditions, it should not be regarded as successful memory_failure() processing for mce handler, but should return a distinct value, otherwise mce handler regards the error page has been identified and isolated, which may lead to calling set_mce_nospec() to change page attribute, etc. Here memory_failure() return -EOPNOTSUPP to indicate that the error event is filtered, mce handler should not take any action for this situation and hwpoison injector should treat as correct. Link: https://lkml.kernel.org/r/20220223082135.2769649-1-luofei@unicloud.com Signed-off-by: luofei <luofei@unicloud.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
2d338201d5 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"147 patches, based on
|
||
|
David Hildenbrand
|
3fcebf9020 |
mm/memory_hotplug: improved dynamic memory group aware "auto-movable" online policy
Currently, the "auto-movable" online policy does not allow for hotplugged KERNEL (ZONE_NORMAL) memory to increase the amount of MOVABLE memory we can have, primarily, because there is no coordiantion across memory devices and we don't want to create zone-imbalances accidentially when unplugging memory. However, within a single memory device it's different. Let's allow for KERNEL memory within a dynamic memory group to allow for more MOVABLE within the same memory group. The only thing we have to take care of is that the managing driver avoids zone imbalances by unplugging MOVABLE memory first, otherwise there can be corner cases where unplug of memory could result in (accidential) zone imbalances. virtio-mem is the only user of dynamic memory groups and recently added support for prioritizing unplug of ZONE_MOVABLE over ZONE_NORMAL, so we don't need a new toggle to enable it for dynamic memory groups. We limit this handling to dynamic memory groups, because: * We want to keep the runtime overhead for collecting stats when onlining a single memory block small. We tend to have only a handful of dynamic memory groups, but we can have quite some static memory groups (e.g., 256 DIMMs). * It doesn't make too much sense for static memory groups, as we try onlining all applicable memory blocks either completely to ZONE_MOVABLE or not. In ordinary operation, we won't have a mixture of zones within a static memory group. When adding memory to a dynamic memory group, we'll first online memory to ZONE_MOVABLE as long as early KERNEL memory allows for it. Then, we'll online the next unit(s) to ZONE_NORMAL, until we can online the next unit(s) to ZONE_MOVABLE. For a simple virtio-mem device with a MOVABLE:KERNEL ratio of 3:1, it will result in a layout like: [M][M][M][M][M][M][M][M][N][M][M][M][N][M][M][M]... ^ movable memory due to early kernel memory ^ allows for more movable memory ... ^-----^ ... here ^ allows for more movable memory ... ^-----^ ... here While the created layout is sub-optimal when it comes to contiguous zones, it gives us the maximum flexibility when dynamically growing/shrinking a device; we can grow small VMs really big in small steps, and still shrink reliably to e.g., 1/4 of the maximum VM size in this example, removing full memory blocks along with meta data more reliably. Mark dynamic memory groups in the xarray such that we can efficiently iterate over them when collecting stats. In usual setups, we have one virtio-mem device per NUMA node, and usually only a small number of NUMA nodes. Note: for now, there seems to be no compelling reason to make this behavior configurable. Link: https://lkml.kernel.org/r/20210806124715.17090-10-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hui Zhu <teawater@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Marek Kedzierski <mkedzier@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
445fcf7c72 |
mm/memory_hotplug: memory group aware "auto-movable" online policy
Use memory groups to improve our "auto-movable" onlining policy: 1. For static memory groups (e.g., a DIMM), online a memory block MOVABLE only if all other memory blocks in the group are either MOVABLE or could be onlined MOVABLE. A DIMM will either be MOVABLE or not, not a mixture. 2. For dynamic memory groups (e.g., a virtio-mem device), online a memory block MOVABLE only if all other memory blocks inside the current unit are either MOVABLE or could be onlined MOVABLE. For a virtio-mem device with a device block size with 512 MiB, all 128 MiB memory blocks wihin a 512 MiB unit will either be MOVABLE or not, not a mixture. We have to pass the memory group to zone_for_pfn_range() to take the memory group into account. Note: for now, there seems to be no compelling reason to make this behavior configurable. Link: https://lkml.kernel.org/r/20210806124715.17090-9-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hui Zhu <teawater@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Marek Kedzierski <mkedzier@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
836809ec75 |
mm/memory_hotplug: track present pages in memory groups
Let's track all present pages in each memory group. Especially, track memory present in ZONE_MOVABLE and memory present in one of the kernel zones (which really only is ZONE_NORMAL right now as memory groups only apply to hotplugged memory) separately within a memory group, to prepare for making smart auto-online decision for individual memory blocks within a memory group based on group statistics. Link: https://lkml.kernel.org/r/20210806124715.17090-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hui Zhu <teawater@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Marek Kedzierski <mkedzier@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
028fc57a1c |
drivers/base/memory: introduce "memory groups" to logically group memory blocks
In our "auto-movable" memory onlining policy, we want to make decisions across memory blocks of a single memory device. Examples of memory devices include ACPI memory devices (in the simplest case a single DIMM) and virtio-mem. For now, we don't have a connection between a single memory block device and the real memory device. Each memory device consists of 1..X memory block devices. Let's logically group memory blocks belonging to the same memory device in "memory groups". Memory groups can span multiple physical ranges and a memory group itself does not contain any information regarding physical ranges, only properties (e.g., "max_pages") necessary for improved memory onlining. Introduce two memory group types: 1) Static memory group: E.g., a single ACPI memory device, consisting of 1..X memory resources. A memory group consists of 1..Y memory blocks. The whole group is added/removed in one go. If any part cannot get offlined, the whole group cannot be removed. 2) Dynamic memory group: E.g., a single virtio-mem device. Memory is dynamically added/removed in a fixed granularity, called a "unit", consisting of 1..X memory blocks. A unit is added/removed in one go. If any part of a unit cannot get offlined, the whole unit cannot be removed. In case of 1) we usually want either all memory managed by ZONE_MOVABLE or none. In case of 2) we usually want to have as many units as possible managed by ZONE_MOVABLE. We want a single unit to be of the same type. For now, memory groups are an internal concept that is not exposed to user space; we might want to change that in the future, though. add_memory() users can specify a mgid instead of a nid when passing the MHP_NID_IS_MGID flag. Link: https://lkml.kernel.org/r/20210806124715.17090-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hui Zhu <teawater@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Marek Kedzierski <mkedzier@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
4b09700244 |
mm: track present early pages per zone
Patch series "mm/memory_hotplug: "auto-movable" online policy and memory groups", v3.
I. Goal
The goal of this series is improving in-kernel auto-online support. It
tackles the fundamental problems that:
1) We can create zone imbalances when onlining all memory blindly to
ZONE_MOVABLE, in the worst case crashing the system. We have to know
upfront how much memory we are going to hotplug such that we can
safely enable auto-onlining of all hotplugged memory to ZONE_MOVABLE
via "online_movable". This is far from practical and only applicable in
limited setups -- like inside VMs under the RHV/oVirt hypervisor which
will never hotplug more than 3 times the boot memory (and the
limitation is only in place due to the Linux limitation).
2) We see more setups that implement dynamic VM resizing, hot(un)plugging
memory to resize VM memory. In these setups, we might hotplug a lot of
memory, but it might happen in various small steps in both directions
(e.g., 2 GiB -> 8 GiB -> 4 GiB -> 16 GiB ...). virtio-mem is the
primary driver of this upstream right now, performing such dynamic
resizing NUMA-aware via multiple virtio-mem devices.
Onlining all hotplugged memory to ZONE_NORMAL means we basically have
no hotunplug guarantees. Onlining all to ZONE_MOVABLE means we can
easily run into zone imbalances when growing a VM. We want a mixture,
and we want as much memory as reasonable/configured in ZONE_MOVABLE.
Details regarding zone imbalances can be found at [1].
3) Memory devices consist of 1..X memory block devices, however, the
kernel doesn't really track the relationship. Consequently, also user
space has no idea. We want to make per-device decisions.
As one example, for memory hotunplug it doesn't make sense to use a
mixture of zones within a single DIMM: we want all MOVABLE if
possible, otherwise all !MOVABLE, because any !MOVABLE part will easily
block the whole DIMM from getting hotunplugged.
As another example, virtio-mem operates on individual units that span
1..X memory blocks. Similar to a DIMM, we want a unit to either be all
MOVABLE or !MOVABLE. A "unit" can be thought of like a DIMM, however,
all units of a virtio-mem device logically belong together and are
managed (added/removed) by a single driver. We want as much memory of
a virtio-mem device to be MOVABLE as possible.
4) We want memory onlining to be done right from the kernel while adding
memory, not triggered by user space via udev rules; for example, this
is reqired for fast memory hotplug for drivers that add individual
memory blocks, like virito-mem. We want a way to configure a policy in
the kernel and avoid implementing advanced policies in user space.
The auto-onlining support we have in the kernel is not sufficient. All we
have is a) online everything MOVABLE (online_movable) b) online everything
!MOVABLE (online_kernel) c) keep zones contiguous (online). This series
allows configuring c) to mean instead "online movable if possible
according to the coniguration, driven by a maximum MOVABLE:KERNEL ratio"
-- a new onlining policy.
II. Approach
This series does 3 things:
1) Introduces the "auto-movable" online policy that initially operates on
individual memory blocks only. It uses a maximum MOVABLE:KERNEL ratio
to make a decision whether a memory block will be onlined to
ZONE_MOVABLE or not. However, in the basic form, hotplugged KERNEL
memory does not allow for more MOVABLE memory (details in the
patches). CMA memory is treated like MOVABLE memory.
2) Introduces static (e.g., DIMM) and dynamic (e.g., virtio-mem) memory
groups and uses group information to make decisions in the
"auto-movable" online policy across memory blocks of a single memory
device (modeled as memory group). More details can be found in patch
#3 or in the DIMM example below.
3) Maximizes ZONE_MOVABLE memory within dynamic memory groups, by
allowing ZONE_NORMAL memory within a dynamic memory group to allow for
more ZONE_MOVABLE memory within the same memory group. The target use
case is dynamic VM resizing using virtio-mem. See the virtio-mem
example below.
I remember that the basic idea of using a ratio to implement a policy in
the kernel was once mentioned by Vitaly Kuznetsov, but I might be wrong (I
lost the pointer to that discussion).
For me, the main use case is using it along with virtio-mem (and DIMMs /
ppc64 dlpar where necessary) for dynamic resizing of VMs, increasing the
amount of memory we can hotunplug reliably again if we might eventually
hotplug a lot of memory to a VM.
III. Target Usage
The target usage will be:
1) Linux boots with "mhp_default_online_type=offline"
2) User space (e.g., systemd unit) configures memory onlining (according
to a config file and system properties), for example:
* Setting memory_hotplug.online_policy=auto-movable
* Setting memory_hotplug.auto_movable_ratio=301
* Setting memory_hotplug.auto_movable_numa_aware=true
3) User space enabled auto onlining via "echo online >
/sys/devices/system/memory/auto_online_blocks"
4) User space triggers manual onlining of all already-offline memory
blocks (go over offline memory blocks and set them to "online")
IV. Example
For DIMMs, hotplugging 4 GiB DIMMs to a 4 GiB VM with a configured ratio of
301% results in the following layout:
Memory block 0-15: DMA32 (early)
Memory block 32-47: Normal (early)
Memory block 48-79: Movable (DIMM 0)
Memory block 80-111: Movable (DIMM 1)
Memory block 112-143: Movable (DIMM 2)
Memory block 144-275: Normal (DIMM 3)
Memory block 176-207: Normal (DIMM 4)
... all Normal
(-> hotplugged Normal memory does not allow for more Movable memory)
For virtio-mem, using a simple, single virtio-mem device with a 4 GiB VM
will result in the following layout:
Memory block 0-15: DMA32 (early)
Memory block 32-47: Normal (early)
Memory block 48-143: Movable (virtio-mem, first 12 GiB)
Memory block 144: Normal (virtio-mem, next 128 MiB)
Memory block 145-147: Movable (virtio-mem, next 384 MiB)
Memory block 148: Normal (virtio-mem, next 128 MiB)
Memory block 149-151: Movable (virtio-mem, next 384 MiB)
... Normal/Movable mixture as above
(-> hotplugged Normal memory allows for more Movable memory within
the same device)
Which gives us maximum flexibility when dynamically growing/shrinking a
VM in smaller steps.
V. Doc Update
I'll update the memory-hotplug.rst documentation, once the overhaul [1] is
usptream. Until then, details can be found in patch #2.
VI. Future Work
1) Use memory groups for ppc64 dlpar
2) Being able to specify a portion of (early) kernel memory that will be
excluded from the ratio. Like "128 MiB globally/per node" are excluded.
This might be helpful when starting VMs with extremely small memory
footprint (e.g., 128 MiB) and hotplugging memory later -- not wanting
the first hotplugged units getting onlined to ZONE_MOVABLE. One
alternative would be a trigger to not consider ZONE_DMA memory
in the ratio. We'll have to see if this is really rrequired.
3) Indicate to user space that MOVABLE might be a bad idea -- especially
relevant when memory ballooning without support for balloon compaction
is active.
This patch (of 9):
For implementing a new memory onlining policy, which determines when to
online memory blocks to ZONE_MOVABLE semi-automatically, we need the
number of present early (boot) pages -- present pages excluding hotplugged
pages. Let's track these pages per zone.
Pass a page instead of the zone to adjust_present_page_count(), similar as
adjust_managed_page_count() and derive the zone from the page.
It's worth noting that a memory block to be offlined/onlined is either
completely "early" or "not early". add_memory() and friends can only add
complete memory blocks and we only online/offline complete (individual)
memory blocks.
Link: https://lkml.kernel.org/r/20210806124715.17090-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210806124715.17090-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Ohhoon Kwon
|
fc1f5e980a |
mm: sparse: pass section_nr to find_memory_block
With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts mem_section to section_nr could be costly since it iterates all section roots to check if the given mem_section is in its range. On the other hand, __nr_to_section() which converts section_nr to mem_section can be done in O(1). Let's pass section_nr instead of mem_section ptr to find_memory_block() in order to reduce needless iterations. Link: https://lkml.kernel.org/r/20210707150212.855-3-ohoono.kwon@samsung.com Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Greg Kroah-Hartman
|
68afbd8459 |
Linux 5.13-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS /EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1 b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY /8KfjeE= =JfJm -----END PGP SIGNATURE----- Merge tag 'v5.13-rc6' into driver-core-next We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
David Hildenbrand
|
928130532e |
drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64
offline_pages() properly checks for memory holes and bails out.
However, we do a page_zone(pfn_to_page(start_pfn)) before calling
offline_pages() when offlining a memory block.
We should not unconditionally call page_zone(pfn_to_page(start_pfn)) on
aarch64 in offlining code, otherwise we can trigger a BUG when hitting a
memory hole:
kernel BUG at include/linux/mm.h:1383!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in: loop processor efivarfs ip_tables x_tables ext4 mbcache jbd2 dm_mod igb nvme i2c_algo_bit mlx5_core i2c_core nvme_core firmware_class
CPU: 13 PID: 1694 Comm: ranbug Not tainted 5.12.0-next-20210524+ #4
Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 1.6 06/28/2020
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : memory_subsys_offline+0x1f8/0x250
lr : memory_subsys_offline+0x1f8/0x250
Call trace:
memory_subsys_offline+0x1f8/0x250
device_offline+0x154/0x1d8
online_store+0xa4/0x118
dev_attr_store+0x44/0x78
sysfs_kf_write+0xe8/0x138
kernfs_fop_write_iter+0x26c/0x3d0
new_sync_write+0x2bc/0x4f8
vfs_write+0x718/0xc88
ksys_write+0xf8/0x1e0
__arm64_sys_write+0x74/0xa8
invoke_syscall.constprop.0+0x78/0x1e8
do_el0_svc+0xe4/0x298
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb8
el0_sync+0x178/0x180
Kernel panic - not syncing: Oops - BUG: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x00000251,20000846
Memory Limit: none
If nr_vmemmap_pages is set, we know that we are dealing with hotplugged
memory that doesn't have any holes. So call
page_zone(pfn_to_page(start_pfn)) only when really necessary -- when
nr_vmemmap_pages is set and we actually adjust the present pages.
Link: https://lkml.kernel.org/r/20210526075226.5572-1-david@redhat.com
Fixes:
|
||
Rikard Falkeborn
|
5a576764e4 |
drivers/base: Constify static attribute_group structs
These are only used by putting their address in an array of pointers to const struct attribute_group (either directly or via the __ATTRIBUTE_GROUP macro). Make them const to allow the compiler to place them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210528213408.20067-1-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Oscar Salvador
|
a08a2ae346 |
mm,memory_hotplug: allocate memmap from the added memory range
Physical memory hotadd has to allocate a memmap (struct page array) for
the newly added memory section. Currently, alloc_pages_node() is used
for those allocations.
This has some disadvantages:
a) an existing memory is consumed for that purpose
(eg: ~2MB per 128MB memory section on x86_64)
This can even lead to extreme cases where system goes OOM because
the physically hotplugged memory depletes the available memory before
it is onlined.
b) if the whole node is movable then we have off-node struct pages
which has performance drawbacks.
c) It might be there are no PMD_ALIGNED chunks so memmap array gets
populated with base pages.
This can be improved when CONFIG_SPARSEMEM_VMEMMAP is enabled.
Vmemap page tables can map arbitrary memory. That means that we can
reserve a part of the physically hotadded memory to back vmemmap page
tables. This implementation uses the beginning of the hotplugged memory
for that purpose.
There are some non-obviously things to consider though.
Vmemmap pages are allocated/freed during the memory hotplug events
(add_memory_resource(), try_remove_memory()) when the memory is
added/removed. This means that the reserved physical range is not
online although it is used. The most obvious side effect is that
pfn_to_online_page() returns NULL for those pfns. The current design
expects that this should be OK as the hotplugged memory is considered a
garbage until it is onlined. For example hibernation wouldn't save the
content of those vmmemmaps into the image so it wouldn't be restored on
resume but this should be OK as there no real content to recover anyway
while metadata is reachable from other data structures (e.g. vmemmap
page tables).
The reserved space is therefore (de)initialized during the {on,off}line
events (mhp_{de}init_memmap_on_memory). That is done by extracting page
allocator independent initialization from the regular onlining path.
The primary reason to handle the reserved space outside of
{on,off}line_pages is to make each initialization specific to the
purpose rather than special case them in a single function.
As per above, the functions that are introduced are:
- mhp_init_memmap_on_memory:
Initializes vmemmap pages by calling move_pfn_range_to_zone(), calls
kasan_add_zero_shadow(), and onlines as many sections as vmemmap pages
fully span.
- mhp_deinit_memmap_on_memory:
Offlines as many sections as vmemmap pages fully span, removes the
range from zhe zone by remove_pfn_range_from_zone(), and calls
kasan_remove_zero_shadow() for the range.
The new function memory_block_online() calls mhp_init_memmap_on_memory()
before doing the actual online_pages(). Should online_pages() fail, we
clean up by calling mhp_deinit_memmap_on_memory(). Adjusting of
present_pages is done at the end once we know that online_pages()
succedeed.
On offline, memory_block_offline() needs to unaccount vmemmap pages from
present_pages() before calling offline_pages(). This is necessary because
offline_pages() tears down some structures based on the fact whether the
node or the zone become empty. If offline_pages() fails, we account back
vmemmap pages. If it succeeds, we call mhp_deinit_memmap_on_memory().
Hot-remove:
We need to be careful when removing memory, as adding and
removing memory needs to be done with the same granularity.
To check that this assumption is not violated, we check the
memory range we want to remove and if a) any memory block has
vmemmap pages and b) the range spans more than a single memory
block, we scream out loud and refuse to proceed.
If all is good and the range was using memmap on memory (aka vmemmap pages),
we construct an altmap structure so free_hugepage_table does the right
thing and calls vmem_altmap_free instead of free_pagetable.
Link: https://lkml.kernel.org/r/20210421102701.25051-5-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Oscar Salvador
|
8736cc2d00 |
drivers/base/memory: introduce memory_block_{online,offline}
Patch series "Allocate memmap from hotadded memory (per device)", v10.
The primary goal of this patchset is to reduce memory overhead of the
hot-added memory (at least for SPARSEMEM_VMEMMAP memory model). The
current way we use to populate memmap (struct page array) has two main
drawbacks:
a) it consumes an additional memory until the hotadded memory itself is
onlined and
b) memmap might end up on a different numa node which is especially
true for movable_node configuration.
c) due to fragmentation we might end up populating memmap with base
pages
One way to mitigate all these issues is to simply allocate memmap array
(which is the largest memory footprint of the physical memory hotplug)
from the hot-added memory itself. SPARSEMEM_VMEMMAP memory model allows
us to map any pfn range so the memory doesn't need to be online to be
usable for the array. See patch 4 for more details. This feature is
only usable when CONFIG_SPARSEMEM_VMEMMAP is set.
[Overall design]:
Implementation wise we reuse vmem_altmap infrastructure to override the
default allocator used by vmemap_populate. memory_block structure gains a
new field called nr_vmemmap_pages, which accounts for the number of
vmemmap pages used by that memory_block. E.g: On x86_64, that is 512
vmemmap pages on small memory bloks and 4096 on large memory blocks (1GB)
We also introduce new two functions: memory_block_{online,offline}. These
functions take care of initializing/unitializing vmemmap pages prior to
calling {online,offline}_pages, so the latter functions can remain totally
untouched.
More details can be found in the respective changelogs.
This patch (of 8):
This is a preparatory patch that introduces two new functions:
memory_block_online() and memory_block_offline().
For now, these functions will only call online_pages() and offline_pages()
respectively, but they will be later in charge of preparing the vmemmap
pages, carrying out the initialization and proper accounting of such
pages.
Since memory_block struct contains all the information, pass this struct
down the chain till the end functions.
Link: https://lkml.kernel.org/r/20210421102701.25051-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20210421102701.25051-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
David Hildenbrand
|
e9a2e48e87 |
drivers/base/memory: don't store phys_device in memory blocks
No need to store the value for each and every memory block, as we can easily query the value at runtime. Reshuffle the members to optimize the memory layout. Also, let's clarify what the interface once was used for and why it's legacy nowadays. "phys_device" was used on s390x in older versions of lsmem[2]/chmem[3], back when they were still part of s390x-tools. They were later replaced by the variants in linux-utils. For example, RHEL6 and RHEL7 contain lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux on s390x [4]. "phys_device" was added with sysfs support for memory hotplug in commit |
||
Anshuman Khandual
|
1adf8b468f |
mm/memory_hotplug: rename all existing 'memhp' into 'mhp'
This renames all 'memhp' instances to 'mhp' except for memhp_default_state for being a kernel command line option. This is just a clean up and should not cause a functional change. Let's make it consistent rater than mixing the two prefixes. In preparation for more users of the 'mhp' terminology. Link: https://lkml.kernel.org/r/1611554093-27316-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
b611719978 |
mm/memory_hotplug: prepare passing flags to add_memory() and friends
We soon want to pass flags, e.g., to mark added System RAM resources. mergeable. Prepare for that. This patch is based on a similar patch by Oscar Salvador: https://lkml.kernel.org/r/20190625075227.15193-3-osalvador@suse.de Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Juergen Gross <jgross@suse.com> # Xen related part Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Libor Pechacek <lpechacek@suse.cz> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Leonardo Bras <leobras.c@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julien Grall <julien@xen.org> Cc: Kees Cook <keescook@chromium.org> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richardw.yang@linux.intel.com> Link: https://lkml.kernel.org/r/20200911103459.10306-5-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joe Perches
|
948b3edba8 |
drivers core: Miscellaneous changes for sysfs_emit
Change additional instances that could use sysfs_emit and sysfs_emit_at that the coccinelle script could not convert. o macros creating show functions with ## concatenation o unbound sprintf uses with buf+len for start of output to sysfs_emit_at o returns with ?: tests and sprintf to sysfs_emit o sysfs output with struct class * not struct device * arguments Miscellanea: o remove unnecessary initializations around these changes o consistently use int len for return length of show functions o use octal permissions and not S_<FOO> o rename a few show function names so DEVICE_ATTR_<FOO> can be used o use DEVICE_ATTR_ADMIN_RO where appropriate o consistently use const char *output for strings o checkpatch/style neatening Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8bc24444fe2049a9b2de6127389b57edfdfe324d.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joe Perches
|
973c39115c |
drivers core: Remove strcat uses around sysfs_emit and neaten
strcat is no longer necessary for sysfs_emit and sysfs_emit_at uses. Convert the strcat uses to sysfs_emit calls and neaten other block uses of direct returns to use an intermediate const char *. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/5d606519698ce4c8f1203a2b35797d8254c6050a.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joe Perches
|
aa838896d8 |
drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
Convert the various sprintf fmaily calls in sysfs device show functions
to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety.
Done with:
$ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 .
And cocci script:
$ cat sysfs_emit_dev.cocci
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- strcpy(buf, chr);
+ sysfs_emit(buf, chr);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
- len += scnprintf(buf + len, PAGE_SIZE - len,
+ len += sysfs_emit_at(buf, len,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
...
- strcpy(buf, chr);
- return strlen(buf);
+ return sysfs_emit(buf, chr);
}
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Wei Yang
|
178bdbed3e |
drivers/base/memory: rename base_memory_block_id to memory_block_id
memory_block may have a larger granularity than section, this is why we have base_section_nr. But base_memory_block_id seems a little misleading, since there is no larger granularity concept which groups several memory_block. What we need here is the exact memory_block_id to a section_nr. Let's rename it to make it more precise. Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Link: https://lore.kernel.org/r/20200623025701.2016-2-richard.weiyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Wei Yang
|
40ba2cde77 |
drivers/base/memory: init_memory_block() first parameter is not necessary
The first parameter of init_memory_block() is intended to retrieve the memory_block initiated. But now, we never use it. Drop it for now. Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Link: https://lore.kernel.org/r/20200623025701.2016-1-richard.weiyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Scott Cheloha
|
4fb6eabf10 |
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
Searching for a particular memory block by id is an O(n) operation because each memory block's underlying device is kept in an unsorted linked list on the subsystem bus. We can cut the lookup cost to O(log n) if we cache each memory block in an xarray. This time complexity improvement is significant on systems with many memory blocks. For example: 1. A 128GB POWER9 VM with 256MB memblocks has 512 blocks. With this change memory_dev_init() completes ~12ms faster and walk_memory_blocks() completes ~12ms faster. Before: [ 0.005042] memory_dev_init: adding memory blocks [ 0.021591] memory_dev_init: added memory blocks [ 0.022699] walk_memory_blocks: walking memory blocks [ 0.038730] walk_memory_blocks: walked memory blocks 0-511 After: [ 0.005057] memory_dev_init: adding memory blocks [ 0.009415] memory_dev_init: added memory blocks [ 0.010519] walk_memory_blocks: walking memory blocks [ 0.014135] walk_memory_blocks: walked memory blocks 0-511 2. A 256GB POWER9 LPAR with 256MB memblocks has 1024 blocks. With this change memory_dev_init() completes ~88ms faster and walk_memory_blocks() completes ~87ms faster. Before: [ 0.252246] memory_dev_init: adding memory blocks [ 0.395469] memory_dev_init: added memory blocks [ 0.409413] walk_memory_blocks: walking memory blocks [ 0.433028] walk_memory_blocks: walked memory blocks 0-511 [ 0.433094] walk_memory_blocks: walking memory blocks [ 0.500244] walk_memory_blocks: walked memory blocks 131072-131583 After: [ 0.245063] memory_dev_init: adding memory blocks [ 0.299539] memory_dev_init: added memory blocks [ 0.313609] walk_memory_blocks: walking memory blocks [ 0.315287] walk_memory_blocks: walked memory blocks 0-511 [ 0.315349] walk_memory_blocks: walking memory blocks [ 0.316988] walk_memory_blocks: walked memory blocks 131072-131583 3. A 32TB POWER9 LPAR with 256MB memblocks has 131072 blocks. With this change we complete memory_dev_init() ~37 minutes faster and walk_memory_blocks() at least ~30 minutes faster. The exact timing for walk_memory_blocks() is missing, though I observed that the soft lockups in walk_memory_blocks() disappeared with the change, suggesting that lower bound. Before: [ 13.703907] memory_dev_init: adding blocks [ 2287.406099] memory_dev_init: added all blocks [ 2347.494986] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 2527.625378] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 2707.761977] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 2887.899975] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3068.028318] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3248.158764] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3428.287296] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3608.425357] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3788.554572] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3968.695071] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 4148.823970] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 After: [ 13.696898] memory_dev_init: adding blocks [ 15.660035] memory_dev_init: added all blocks (the walk_memory_blocks traces disappear) There should be no significant negative impact for machines with few memory blocks. A sparse xarray has a small footprint and an O(log n) lookup is negligibly slower than an O(n) lookup for only the smallest number of memory blocks. 1. A 16GB x86 machine with 128MB memblocks has 132 blocks. With this change memory_dev_init() completes ~300us faster and walk_memory_blocks() completes no faster or slower. The improvement is pretty close to noise. Before: [ 0.224752] memory_dev_init: adding memory blocks [ 0.227116] memory_dev_init: added memory blocks [ 0.227183] walk_memory_blocks: walking memory blocks [ 0.227183] walk_memory_blocks: walked memory blocks 0-131 After: [ 0.224911] memory_dev_init: adding memory blocks [ 0.226935] memory_dev_init: added memory blocks [ 0.227089] walk_memory_blocks: walking memory blocks [ 0.227089] walk_memory_blocks: walked memory blocks 0-131 [david@redhat.com: document the locking] Link: http://lkml.kernel.org/r/bc21eec6-7251-4c91-2f57-9a0671f8d414@redhat.com Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Nathan Lynch <nathanl@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rick Lindsley <ricklind@linux.vnet.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Link: http://lkml.kernel.org/r/20200121231028.13699-1-cheloha@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
5f47adf762 |
mm/memory_hotplug: allow to specify a default online_type
For now, distributions implement advanced udev rules to essentially - Don't online any hotplugged memory (s390x) - Online all memory to ZONE_NORMAL (e.g., most virt environments like hyperv) - Online all memory to ZONE_MOVABLE in case the zone imbalance is taken care of (e.g., bare metal, special virt environments) In summary: All memory is usually onlined the same way, however, the kernel always has to ask user space to come up with the same answer. E.g., Hyper-V always waits for a memory block to get onlined before continuing, otherwise it might end up adding memory faster than onlining it, which can result in strange OOM situations. This waiting slows down adding of a bigger amount of memory. Let's allow to specify a default online_type, not just "online" and "offline". This allows distributions to configure the default online_type when booting up and be done with it. We can now specify "offline", "online", "online_movable" and "online_kernel" via - "memhp_default_state=" on the kernel cmdline - /sys/devices/system/memory/auto_online_blocks just like we are able to specify for a single memory block via /sys/devices/system/memory/memoryX/state Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Yumei Huang <yuhuang@redhat.com> Link: http://lkml.kernel.org/r/20200317104942.11178-9-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
862919e568 |
mm/memory_hotplug: convert memhp_auto_online to store an online_type
... and rename it to memhp_default_online_type. This is a preparation for more detailed default online behavior. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Yumei Huang <yuhuang@redhat.com> Link: http://lkml.kernel.org/r/20200317104942.11178-8-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
4dc8207bfd |
drivers/base/memory: store mapping between MMOP_* and string in an array
Let's use a simple array which we can reuse soon. While at it, move the string->mmop conversion out of the device hotplug lock. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Yumei Huang <yuhuang@redhat.com> Link: http://lkml.kernel.org/r/20200317104942.11178-4-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
efc978ad0e |
drivers/base/memory: map MMOP_OFFLINE to 0
Historically, we used the value -1. Just treat 0 as the special case now. Clarify a comment (which was wrong, when we come via device_online() the first time, the online_type would have been 0 / MEM_ONLINE). The default is now always MMOP_OFFLINE. This removes the last user of the manual "-1", which didn't use the enum value. This is a preparation to use the online_type as an array index. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Yumei Huang <yuhuang@redhat.com> Link: http://lkml.kernel.org/r/20200317104942.11178-3-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
956f8b4450 |
drivers/base/memory: rename MMOP_ONLINE_KEEP to MMOP_ONLINE
Patch series "mm/memory_hotplug: allow to specify a default online_type", v3.
Distributions nowadays use udev rules ([1] [2]) to specify if and how to
online hotplugged memory. The rules seem to get more complex with many
special cases. Due to the various special cases,
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE cannot be used. All memory hotplug
is handled via udev rules.
Every time we hotplug memory, the udev rule will come to the same
conclusion. Especially Hyper-V (but also soon virtio-mem) add a lot of
memory in separate memory blocks and wait for memory to get onlined by
user space before continuing to add more memory blocks (to not add memory
faster than it is getting onlined). This of course slows down the whole
memory hotplug process.
To make the job of distributions easier and to avoid udev rules that get
more and more complicated, let's extend the mechanism provided by
- /sys/devices/system/memory/auto_online_blocks
- "memhp_default_state=" on the kernel cmdline
to be able to specify also "online_movable" as well as "online_kernel"
=== Example /usr/libexec/config-memhotplug ===
#!/bin/bash
VIRT=`systemd-detect-virt --vm`
ARCH=`uname -p`
sense_virtio_mem() {
if [ -d "/sys/bus/virtio/drivers/virtio_mem/" ]; then
DEVICES=`find /sys/bus/virtio/drivers/virtio_mem/ -maxdepth 1 -type l | wc -l`
if [ $DEVICES != "0" ]; then
return 0
fi
fi
return 1
}
if [ ! -e "/sys/devices/system/memory/auto_online_blocks" ]; then
echo "Memory hotplug configuration support missing in the kernel"
exit 1
fi
if grep "memhp_default_state=" /proc/cmdline > /dev/null; then
echo "Memory hotplug configuration overridden in kernel cmdline (memhp_default_state=)"
exit 1
fi
if [ $VIRT == "microsoft" ]; then
echo "Detected Hyper-V on $ARCH"
# Hyper-V wants all memory in ZONE_NORMAL
ONLINE_TYPE="online_kernel"
elif sense_virtio_mem; then
echo "Detected virtio-mem on $ARCH"
# virtio-mem wants all memory in ZONE_NORMAL
ONLINE_TYPE="online_kernel"
elif [ $ARCH == "s390x" ] || [ $ARCH == "s390" ]; then
echo "Detected $ARCH"
# standby memory should not be onlined automatically
ONLINE_TYPE="offline"
elif [ $ARCH == "ppc64" ] || [ $ARCH == "ppc64le" ]; then
echo "Detected" $ARCH
# PPC64 onlines all hotplugged memory right from the kernel
ONLINE_TYPE="offline"
elif [ $VIRT == "none" ]; then
echo "Detected bare-metal on $ARCH"
# Bare metal users expect hotplugged memory to be unpluggable. We assume
# that ZONE imbalances on such enterpise servers cannot happen and is
# properly documented
ONLINE_TYPE="online_movable"
else
# TODO: Hypervisors that want to unplug DIMMs and can guarantee that ZONE
# imbalances won't happen
echo "Detected $VIRT on $ARCH"
# Usually, ballooning is used in virtual environments, so memory should go to
# ZONE_NORMAL. However, sometimes "movable_node" is relevant.
ONLINE_TYPE="online"
fi
echo "Selected online_type:" $ONLINE_TYPE
# Configure what to do with memory that will be hotplugged in the future
echo $ONLINE_TYPE 2>/dev/null > /sys/devices/system/memory/auto_online_blocks
if [ $? != "0" ]; then
echo "Memory hotplug cannot be configured (e.g., old kernel or missing permissions)"
# A backup udev rule should handle old kernels if necessary
exit 1
fi
# Process all already pluggedd blocks (e.g., DIMMs, but also Hyper-V or virtio-mem)
if [ $ONLINE_TYPE != "offline" ]; then
for MEMORY in /sys/devices/system/memory/memory*; do
STATE=`cat $MEMORY/state`
if [ $STATE == "offline" ]; then
echo $ONLINE_TYPE > $MEMORY/state
fi
done
fi
=== Example /usr/lib/systemd/system/config-memhotplug.service ===
[Unit]
Description=Configure memory hotplug behavior
DefaultDependencies=no
Conflicts=shutdown.target
Before=sysinit.target shutdown.target
After=systemd-modules-load.service
ConditionPathExists=|/sys/devices/system/memory/auto_online_blocks
[Service]
ExecStart=/usr/libexec/config-memhotplug
Type=oneshot
TimeoutSec=0
RemainAfterExit=yes
[Install]
WantedBy=sysinit.target
=== Example modification to the 40-redhat.rules [2] ===
: diff --git a/40-redhat.rules b/40-redhat.rules-new
: index 2c690e5..168fd03 100644
: --- a/40-redhat.rules
: +++ b/40-redhat.rules-new
: @@ -6,6 +6,9 @@ SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}
: # Memory hotadd request
: SUBSYSTEM!="memory", GOTO="memory_hotplug_end"
: ACTION!="add", GOTO="memory_hotplug_end"
: +# memory hotplug behavior configured
: +PROGRAM=="grep online /sys/devices/system/memory/auto_online_blocks", GOTO="memory_hotplug_end"
: +
: PROGRAM="/bin/uname -p", RESULT=="s390*", GOTO="memory_hotplug_end"
:
: ENV{.state}="online"
===
[1] https://github.com/lnykryn/systemd-rhel/pull/281
[2] https://github.com/lnykryn/systemd-rhel/blob/staging/rules/40-redhat.rules
This patch (of 8):
The name is misleading and it's not really clear what is "kept". Let's
just name it like the online_type name we expose to user space ("online").
Add some documentation to the types.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Yumei Huang <yuhuang@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Link: http://lkml.kernel.org/r/20200319131221.14044-1-david@redhat.com
Link: http://lkml.kernel.org/r/20200317104942.11178-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
David Hildenbrand
|
fada9ae3ed |
drivers/base/memory.c: drop pages_correctly_probed()
pages_correctly_probed() is a leftover from ancient times. It dates back to commit |
||
|
David Hildenbrand
|
68c3a6ac65 |
drivers/base/memory.c: drop section_count
Patch series "mm: drop superfluous section checks when onlining/offlining". Let's drop some superfluous section checks on the onlining/offlining path. This patch (of 3): Since commit |
||
|
David Hildenbrand
|
53cdc1cb29 |
drivers/base/memory.c: indicate all memory blocks as removable
We see multiple issues with the implementation/interface to compute
whether a memory block can be offlined (exposed via
/sys/devices/system/memory/memoryX/removable) and would like to simplify
it (remove the implementation).
1. It runs basically lockless. While this might be good for performance,
we see possible races with memory offlining that will require at
least some sort of locking to fix.
2. Nowadays, more false positives are possible. No arch-specific checks
are performed that validate if memory offlining will not be denied
right away (and such check will require locking). For example, arm64
won't allow to offline any memory block that was added during boot -
which will imply a very high error rate. Other archs have other
constraints.
3. The interface is inherently racy. E.g., if a memory block is detected
to be removable (and was not a false positive at that time), there is
still no guarantee that offlining will actually succeed. So any
caller already has to deal with false positives.
4. It is unclear which performance benefit this interface actually
provides. The introducing commit
|
||
|
David Hildenbrand
|
9291799884 |
mm/memory_hotplug: drop valid_start/valid_end from test_pages_in_a_zone()
The callers are only interested in the actual zone, they don't care about boundaries. Return the zone instead to simplify. Link: http://lkml.kernel.org/r/20200110183308.11849-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
bd5c2344f9 |
mm/memory_hotplug: pass in nid to online_pages()
Patch series "mm/memory_hotplug: pass in nid to online_pages()". Simplify onlining code and get rid of find_memory_block(). Pass in the nid from the memory block we are trying to online directly, instead of manually looking it up. This patch (of 2): No need to lookup the memory block, we can directly pass in the nid. Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
3f9903b9ca |
mm: remove the memory isolate notifier
Luckily, we have no users left, so we can get rid of it. Cleanup set_migratetype_isolate() a little bit. Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
848e19ad3c |
drivers/base/memory.c: drop the mem_sysfs_mutex
The mem_sysfs_mutex isn't really helpful. Also, it's not really clear what the mutex protects at all. The device lists of the memory subsystem are protected separately. We don't need that mutex when looking up. creating, or removing independent devices. find_memory_block_by_id() will perform locking on its own and grab a reference of the returned device. At the time memory_dev_init() is called, we cannot have concurrent hot(un)plug operations yet - we're still fairly early during boot. We don't need any locking. The creation/removal of memory block devices should be protected on a higher level - especially using the device hotplug lock to avoid documented issues (see Documentation/core-api/memory-hotplug.rst) - or if that is reworked, using similar locking. Protecting in the context of these functions only doesn't really make sense. Especially, if we would have a situation where the same memory blocks are created/deleted at the same time, there is something horribly going wrong (imagining adding/removing a DIMM at the same time from two call paths) - after the functions succeeded something else in the callers would blow up (e.g., create_memory_block_devices() succeeded but there are no memory block devices anymore). All relevant call paths (except when adding memory early during boot via ACPI, which is now documented) hold the device hotplug lock when adding memory, and when removing memory. Let's document that instead. Add a simple safety net to create_memory_block_devices() in case we would actually remove memory blocks while adding them, so we'll never dereference a NULL pointer. Simplify memory_dev_init() now that the lock is gone. Link: http://lkml.kernel.org/r/20190925082621.4927-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Naoya Horiguchi
|
feec24a613 |
mm, soft-offline: convert parameter to pfn
Currently soft_offline_page() receives struct page, and its sibling memory_failure() receives pfn. This discrepancy looks weird and makes precheck on pfn validity tricky. So let's align them. Link: http://lkml.kernel.org/r/20191016234706.GA5493@www9186uo.sakura.ne.jp Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
2c91f8fc6c |
mm/memory_hotplug: fix try_offline_node()
try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit |
||
|
David Hildenbrand
|
641fe2e938 |
drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()
Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. Right now, when trying to soft-offline a PFN that resides on a memory block that was never onlined, one gets a misleading error with CONFIG_PAGE_POISONING: :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page [ 23.097167] soft offline: 0x150000 page already poisoned But the actual result depends on the garbage in the memmap. soft_offline_page() can only work with online pages, it returns -EIO in case of ZONE_DEVICE. Make sure to only forward pages that are online (iow, managed by the buddy) and, therefore, have an initialized memmap. Add a check against pfn_to_online_page() and similarly return -EIO. Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com Fixes: |
||
|
David Hildenbrand
|
b6c88d3b9d |
drivers/base/memory.c: don't store end_section_nr in memory blocks
Each memory block spans the same amount of sections/pages/bytes. The size is determined before the first memory block is created. No need to store what we can easily calculate - and the calculations even look simpler now. Michal brought up the idea of variable-sized memory blocks. However, if we ever implement something like this, we will need an API compatibility switch and reworks at various places (most code assumes a fixed memory block size). So let's cleanup what we have right now. While at it, fix the variable naming in register_mem_sect_under_node() - we no longer talk about a single section. Link: http://lkml.kernel.org/r/20190809110200.2746-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
902ce63b33 |
driver/base/memory.c: validate memory block size early
Let's validate the memory block size early, when initializing the memory device infrastructure. Fail hard in case the value is not suitable. As nobody checks the return value of memory_dev_init(), turn it into a void function and fail with a panic in all scenarios instead. Otherwise, we'll crash later during boot when core/drivers expect that the memory device infrastructure (including memory_block_size_bytes()) works as expected. I think long term, we should move the whole memory block size configuration (set_memory_block_size_order() and memory_block_size_bytes()) into drivers/base/memory.c. Link: http://lkml.kernel.org/r/20190806090142.22709-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
f915fb7fb2 |
drivers/base/memory.c: fixup documentation of removable/phys_index/block_size_bytes
Let's rephrase to memory block terminology and add some further clarifications. Link: http://lkml.kernel.org/r/20190806080826.5963-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
d84f2f5a75 |
drivers/base/node.c: simplify unregister_memory_block_under_nodes()
We don't allow to offline memory block devices that belong to multiple numa nodes. Therefore, such devices can never get removed. It is sufficient to process a single node when removing the memory block. No need to iterate over each and every PFN. We already have the nid stored for each memory block. Make sure that the nid always has a sane value. Please note that checking for node_online(nid) is not required. If we would have a memory block belonging to a node that is no longer offline, then we would have a BUG in the node offlining code. Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
dd62528591 |
drivers/base/memory.c: get rid of find_memory_block_hinted()
No longer needed, let's remove it. Also, drop the "hint" parameter completely from "find_memory_block_by_id", as nobody needs it anymore. [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20190620183139.4352-7-david@redhat.com [david@redhat.com: handle zero-length walks] Link: http://lkml.kernel.org/r/1c2edc22-afd7-2211-c4c7-40e54e5007e8@redhat.com Link: http://lkml.kernel.org/r/20190614100114.311-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qian Cai <cai@lca.pw> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
ea8846411a |
mm/memory_hotplug: move and simplify walk_memory_blocks()
Let's move walk_memory_blocks() to the place where memory block logic resides and simplify it. While at it, add a type for the callback function. Link: http://lkml.kernel.org/r/20190614100114.311-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
90ec010fe0 |
drivers/base/memory: use "unsigned long" for block ids
Block ids are just shifted section numbers, so let's also use "unsigned long" for them, too. Link: http://lkml.kernel.org/r/20190614100114.311-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |