On AMD Fam19h Zen3, the branch sampling (BRS) feature must be disabled before
entering low power and re-enabled (if was active) when returning from low
power. Otherwise, the NMI interrupt may be held up for too long and cause
problems. Stopping BRS will cause the NMI to be delivered if it was held up.
Define a perf_amd_brs_lopwr_cb() callback to stop/restart BRS. The callback
is protected by a jump label which is enabled only when AMD BRS is detected.
In all other cases, the callback is never called.
Signed-off-by: Stephane Eranian <eranian@google.com>
[peterz: static_call() and build fixes]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322221517.2510440-10-eranian@google.com
The AMD Branch Sampling features does not provide hardware filtering by
privilege level. The associated PMU counter does but not the branch sampling
by itself. Given how BRS operates there is a possibility that BRS captures
kernel level branches even though the event is programmed to count only at
the user level.
Implement a workaround in software by removing the branches which belong to
the wrong privilege level. The privilege level is evaluated on the target of
the branch and not the source so as to be compatible with other architectures.
As a consequence of this patch, the number of entries in the
PERF_RECORD_BRANCH_STACK buffer may be less than the maximum (16). It could
even be zero. Another consequence is that consecutive entries in the branch
stack may not reflect actual code path and may have discontinuities, in case
kernel branches were suppressed. But this is no different than what happens
on other architectures.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322221517.2510440-6-eranian@google.com
Add support for the AMD Fam19h 16-deep branch sampling feature as
described in the AMD PPR Fam19h Model 01h Revision B1. This is a model
specific extension. It is not an architected AMD feature.
The Branch Sampling (BRS) operates with a 16-deep saturating buffer in MSR
registers. There is no branch type filtering. All control flow changes are
captured. BRS relies on specific programming of the core PMU of Fam19h. In
particular, the following requirements must be met:
- the sampling period be greater than 16 (BRS depth)
- the sampling period must use a fixed and not frequency mode
BRS interacts with the NMI interrupt as well. Because enabling BRS is
expensive, it is only activated after P event occurrences, where P is the
desired sampling period. At P occurrences of the event, the counter
overflows, the CPU catches the interrupt, activates BRS for 16 branches until
it saturates, and then delivers the NMI to the kernel. Between the overflow
and the time BRS activates more branches may be executed skewing the period.
All along, the sampling event keeps counting. The skid may be attenuated by
reducing the sampling period by 16 (subsequent patch).
BRS is integrated into perf_events seamlessly via the same
PERF_RECORD_BRANCH_STACK sample format. BRS generates perf_branch_entry
records in the sampling buffer. No prediction information is supported. The
branches are stored in reverse order of execution. The most recent branch is
the first entry in each record.
No modification to the perf tool is necessary.
BRS can be used with any sampling event. However, it is recommended to use
the RETIRED_BRANCH_INSTRUCTIONS event because it matches what the BRS
captures.
$ perf record -b -c 1000037 -e cpu/event=0xc2,name=ret_br_instructions/ test
$ perf report -D
56531696056126 0x193c000 [0x1a8]: PERF_RECORD_SAMPLE(IP, 0x2): 18122/18230: 0x401d24 period: 1000037 addr: 0
... branch stack: nr:16
..... 0: 0000000000401d24 -> 0000000000401d5a 0 cycles 0
..... 1: 0000000000401d5c -> 0000000000401d24 0 cycles 0
..... 2: 0000000000401d22 -> 0000000000401d5c 0 cycles 0
..... 3: 0000000000401d5e -> 0000000000401d22 0 cycles 0
..... 4: 0000000000401d20 -> 0000000000401d5e 0 cycles 0
..... 5: 0000000000401d3e -> 0000000000401d20 0 cycles 0
..... 6: 0000000000401d42 -> 0000000000401d3e 0 cycles 0
..... 7: 0000000000401d3c -> 0000000000401d42 0 cycles 0
..... 8: 0000000000401d44 -> 0000000000401d3c 0 cycles 0
..... 9: 0000000000401d3a -> 0000000000401d44 0 cycles 0
..... 10: 0000000000401d46 -> 0000000000401d3a 0 cycles 0
..... 11: 0000000000401d38 -> 0000000000401d46 0 cycles 0
..... 12: 0000000000401d48 -> 0000000000401d38 0 cycles 0
..... 13: 0000000000401d36 -> 0000000000401d48 0 cycles 0
..... 14: 0000000000401d4a -> 0000000000401d36 0 cycles 0
..... 15: 0000000000401d34 -> 0000000000401d4a 0 cycles 0
... thread: test:18230
...... dso: test
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322221517.2510440-4-eranian@google.com
