This patch implements features provisioning for vdpa_sim_net.
1) validating the provisioned features to be a subset of the parent
features.
2) clearing the features that is not wanted by the userspace
For example:
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
1) provision vDPA device with all features that are supported by the
net simulator
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
2) provision vDPA device with a subset of the features
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Expose VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_WRITE_ZEROES features
to the drivers and handle VIRTIO_BLK_T_DISCARD and
VIRTIO_BLK_T_WRITE_ZEROES requests checking ranges and flags.
The simulator behaves like a ramdisk, so for VIRTIO_BLK_F_DISCARD
does nothing, while for VIRTIO_BLK_T_WRITE_ZEROES sets to 0 the
specified region.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-5-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The simulator behaves like a ramdisk, so we don't have to do
anything when a VIRTIO_BLK_T_FLUSH request is received, but it
could be useful to test driver behavior.
Let's expose the VIRTIO_BLK_F_FLUSH feature to inform the driver
that we support the flush command.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add handling of other requests, where will be
useful to reuse vdpasim_blk_check_range().
So let's make it more generic by adding the `max_sectors` parameter,
since different requests allow different numbers of maximum sectors.
Let's also print the messages directly in vdpasim_blk_check_range()
to avoid duplicate prints.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO spec states: "The sector number indicates the offset
(multiplied by 512) where the read or write is to occur. This field is
unused and set to 0 for commands other than read or write."
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement suspend operation for vdpa_sim devices, so vhost-vdpa will
offer that backend feature and userspace can effectively suspend the
device.
This is a must before get virtqueue indexes (base) for live migration,
since the device could modify them after userland gets them. There are
individual ways to perform that action for some devices
(VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no
way to perform it for any vhost device (and, in particular, vhost-vdpa).
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-5-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit bda324fd03 ("vdpasim: control virtqueue support") changed
the allocation of iotlbs calling vhost_iotlb_init() for each address
space, instead of vhost_iotlb_alloc().
With this change we forgot to use the limit we had introduced with
the `max_iotlb_entries` module parameter.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220621151208.189959-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Commit bda324fd03 ("vdpasim: control virtqueue support") added two
new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to
initialize them for vdpa_sim_blk.
When creating a new vdpa_sim_blk device this causes the kernel
to panic in this way:
$ vdpa dev add mgmtdev vdpasim_blk name blk0
BUG: kernel NULL pointer dereference, address: 0000000000000030
...
RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb]
...
Call Trace:
<TASK>
vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb]
vdpasim_map_range+0x91/0xd0 [vdpa_sim]
vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim]
...
This happens because vdpasim->iommu[0] is not initialized when
dev_attr.nas is 0.
Let's fix this issue by initializing both (nas, ngroups) to 1 for
vdpa_sim_blk.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220621151323.190431-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Call vringh_complete_iotlb() even when we encounter a serious error
that prevents us from writing the status in the "in" header
(e.g. the header length is incorrect, etc.).
The guest is misbehaving, so maybe the ring is in a bad state, but
let's avoid making things worse.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Limit the number of requests (4 per queue as for vdpa_sim_net) handled
in a batch to prevent the worker from using the CPU for too long.
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Use dev_dbg() instead of dev_err()/dev_warn() to avoid flooding the
host with prints, when the guest driver is misbehaving.
In this way, prints can be dynamically enabled when the vDPA block
simulator is used to validate a driver.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The > comparison needs to be >= to prevent an out of bounds access
of the vdpasim->iommu[] array. The vdpasim->iommu[] is allocated in
vdpasim_create() and it has vdpasim->dev_attr.nas elements.
Fixes: 87e5afeac247 ("vdpasim: control virtqueue support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <YotGQU1q224RKZR8@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Code must be resilient to enable a queue many times.
At the moment the queue is resetting so it's definitely not the expected
behavior.
v2: set vq->ready = 0 at disable.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Cc: stable@vger.kernel.org
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220519145919.772896-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces the control virtqueue support for vDPA
simulator. This is a requirement for supporting advanced features like
multiqueue.
A requirement for control virtqueue is to isolate its memory access
from the rx/tx virtqueues. This is because when using vDPA device
for VM, the control virqueue is not directly assigned to VM. Userspace
(Qemu) will present a shadow control virtqueue to control for
recording the device states.
The isolation is done via the virtqueue groups and ASID support in
vDPA through vhost-vdpa. The simulator is extended to have:
1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue)
2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1
contains CVQ
3) two address spaces and the simulator simply implements the address
spaces by mapping it 1:1 to IOTLB.
For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1
to group 1. So we have:
1) The IOTLB for virtqueue group 0 contains the mappings of guest, so
RX and TX can be assigned to guest directly.
2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which
is the buffers that allocated and managed by VMM only. So CVQ of
vhost-vdpa is visible to VMM only. And Guest can not access the CVQ
of vhost-vdpa.
For the other use cases, since AS 0 is associated to all virtqueue
groups by default. All virtqueues share the same mapping by default.
To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is
implemented in the simulator for the driver to set mac address.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-20-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements a simple unicast filter for vDPA simulator.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-19-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wrap up common buffer completion logic in to vdpasim_net_complete
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-18-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We've already reported maximum mtu via config space, so let's
advertise the feature.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-17-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Configure max supported virtqueues features on the management device.
This info can be retrieved using:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 2
dev_features MAC ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-15-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Configure max supported virtqueues on the management device.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-13-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together.
Cc: stable@vger.kernel.org
Fixes: 4080fc1067 ("vdpa_sim: use iova module to allocate IOVA addresses")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable user to set the mac address and mtu so that each vdpa device
can have its own user specified mac address and mtu.
Now that user is enabled to set the mac address, remove the module
parameter for same.
And example of setting mac addr and mtu and view the configuration:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add an opaque pointer for DMA mapping.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The size passed to alloc_iova() should be the size of page frames.
Now we use byte granularity for the iova domain, so it's safe to
pass the size in bytes to alloc_iova(). But it would be better to use
iova_shift() for the size to avoid future bugs if we change granularity.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210809100923.38-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The vdpa_alloc_device() returns an error pointer upon
failure, not NULL. To handle the failure correctly, this
replaces NULL check with IS_ERR() check and propagate the
error upwards.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
In commit 7d189f617f ("vdpa_sim_blk: implement ramdisk behaviour")
linux/blkdev.h was included here causing the duplicate include.
Remove the later duplicate include.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210510024307.7143-1-wanjiabing@vivo.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable the user to create vDPA block simulator devices using the
vdpa management tool:
# Show vDPA supported devices
$ vdpa mgmtdev show
vdpasim_blk:
supported_classes block
# Create a vDPA block device named as 'blk0' from the management
# device vdpasim:
$ vdpa dev add mgmtdev vdpasim_blk name blk0
# Show the info of the 'blk0' device just created
$ vdpa dev show blk0 -jp
{
"dev": {
"blk0": {
"type": "block",
"mgmtdev": "vdpasim_blk",
"vendor_id": 0,
"max_vqs": 1,
"max_vq_size": 256
}
}
}
# Delete the vDPA device after its use
$ vdpa dev del blk0
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-15-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Handle VIRTIO_BLK_T_GET_ID request, always answering the
"vdpa_blk_sim" string.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-14-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous implementation wrote only the status of each request.
This patch implements a more accurate block device simulator,
providing a ramdisk-like behavior and adding input validation.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-13-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will allow running vDPA for virtio block protocol.
It's a preliminary implementation with a simple request handling:
for each request, only the status (last byte) is set.
It's always set to VIRTIO_BLK_S_OK.
Also input validation is missing and will be added in the next commits.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-12-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new callback is used to get the size of the configuration space
of vDPA devices.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-9-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vringh_getdesc_iotlb() allocates memory to store the kvec, that
is freed with vringh_kiov_cleanup().
vringh_getdesc_iotlb() is able to reuse a kvec previously allocated,
so in order to avoid to allocate the kvec for each request, we are
not calling vringh_kiov_cleanup() when we finished to handle a
request, but we should call it when we free the entire device.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-8-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Usually iotlb accesses are synchronized with a spinlock.
Let's request it as a new parameter in vringh_set_iotlb() and
hold it when we navigate the iotlb in iotlb_translate() to avoid
race conditions with any new additions/deletions of ranges from
the ioltb.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The identical mapping used until now created issues when mapping
different virtual pages with the same physical address.
To solve this issue, we can use the iova module, to handle the IOVA
allocation.
For simplicity we use an IOVA allocator with byte granularity.
We add two new functions, vdpasim_map_range() and vdpasim_unmap_range(),
to handle the IOVA allocation and the registration into the IOMMU/IOTLB.
These functions are used by dma_map_ops callbacks.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210315163450.254396-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch delay the queue number setting to vDPA device
registering. This allows us to probe the virtqueue numbers between
device allocation and registering.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210223061905.422659-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable user to create vdpasim net simulate devices.
Show vdpa management device that supports creating, deleting vdpa devices.
$ vdpa mgmtdev show
vdpasim_net:
supported_classes
net
$ vdpa mgmtdev show -jp
{
"show": {
"vdpasim_net": {
"supported_classes": {
"net"
}
}
}
Create a vdpa device of type networking named as "foo2" from
the management device vdpasim:
$ vdpa dev add mgmtdev vdpasim_net name foo2
Show the newly created vdpa device by its name:
$ vdpa dev show foo2
foo2: type network mgmtdev vdpasim_net vendor_id 0 max_vqs 2 max_vq_size 256
$ vdpa dev show foo2 -jp
{
"dev": {
"foo2": {
"type": "network",
"mgmtdev": "vdpasim_net",
"vendor_id": 0,
"max_vqs": 2,
"max_vq_size": 256
}
}
}
Delete the vdpa device after its use:
$ vdpa dev del foo2
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-7-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In a subsequent patch, when user initiated command creates a vdpa device,
the user chooses the name of the vdpa device.
To support it, extend the device allocation API to consider this name
specified by the caller driver.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MAC address array is used only in vdpa_sim_net.c.
Hence, keep it static.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210105103203.82508-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a
preparation for adding a vdpa simulator module for block devices.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-19-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vringh_getdesc_iotlb() manages 2 iovs for writable and readable
descriptors. This is very useful for the block device, where for
each request we have both types of descriptor.
Let's split the vdpasim_virtqueue's iov field in out_iov and
in_iov to use them with vringh_getdesc_iotlb().
We are using VIRTIO terminology for "out" (readable by the device)
and "in" (writable by the device) descriptors.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-18-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow each device to specify the size of the buffer allocated
in vdpa_sim.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-17-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patch will make the buffer size configurable from each
device.
Since the buffer could be larger than a page, we use kvmalloc()
instead of kmalloc().
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-16-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of calling the vq callback directly, we can leverage the
vringh_notify() function, adding vdpasim_vq_notify() and setting it
in the vringh notify callback.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-15-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
