iwlwifi: pcie: move the ICT / non-ICT handling functions

The purpose of this is to be able to call these functions
from the interrupt handler and not from the primary
interrupt handler.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This commit is contained in:
Emmanuel Grumbach 2013-12-09 14:27:44 +02:00
parent 85bf9da193
commit fc84472b8d

View File

@ -807,6 +807,168 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
wake_up(&trans_pcie->wait_command_queue);
}
/* legacy (non-ICT) ISR. Assumes that trans_pcie->irq_lock is held */
static irqreturn_t iwl_pcie_isr_non_ict(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u32 inta;
lockdep_assert_held(&trans_pcie->irq_lock);
trace_iwlwifi_dev_irq(trans->dev);
/* Discover which interrupts are active/pending */
inta = iwl_read32(trans, CSR_INT);
if (inta & (~trans_pcie->inta_mask)) {
IWL_DEBUG_ISR(trans,
"We got a masked interrupt (0x%08x)...Ack and ignore\n",
inta & (~trans_pcie->inta_mask));
iwl_write32(trans, CSR_INT, inta & (~trans_pcie->inta_mask));
inta &= trans_pcie->inta_mask;
}
/* Ignore interrupt if there's nothing in NIC to service.
* This may be due to IRQ shared with another device,
* or due to sporadic interrupts thrown from our NIC. */
if (!inta) {
IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
/*
* Re-enable interrupts here since we don't have anything to
* service, but only in case the handler won't run. Note that
* the handler can be scheduled because of a previous
* interrupt.
*/
if (test_bit(STATUS_INT_ENABLED, &trans->status) &&
!trans_pcie->inta)
iwl_enable_interrupts(trans);
return IRQ_NONE;
}
if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
/* Hardware disappeared. It might have already raised
* an interrupt */
IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
return IRQ_HANDLED;
}
if (iwl_have_debug_level(IWL_DL_ISR))
IWL_DEBUG_ISR(trans,
"ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, trans_pcie->inta_mask,
iwl_read32(trans, CSR_FH_INT_STATUS));
trans_pcie->inta |= inta;
/* the thread will service interrupts and re-enable them */
return IRQ_WAKE_THREAD;
}
/* a device (PCI-E) page is 4096 bytes long */
#define ICT_SHIFT 12
#define ICT_SIZE (1 << ICT_SHIFT)
#define ICT_COUNT (ICT_SIZE / sizeof(u32))
/* interrupt handler using ict table, with this interrupt driver will
* stop using INTA register to get device's interrupt, reading this register
* is expensive, device will write interrupts in ICT dram table, increment
* index then will fire interrupt to driver, driver will OR all ICT table
* entries from current index up to table entry with 0 value. the result is
* the interrupt we need to service, driver will set the entries back to 0 and
* set index.
*/
static irqreturn_t iwl_pcie_isr_ict(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
unsigned long flags;
irqreturn_t ret;
u32 inta;
u32 val = 0;
u32 read;
spin_lock_irqsave(&trans_pcie->irq_lock, flags);
/* dram interrupt table not set yet,
* use legacy interrupt.
*/
if (unlikely(!trans_pcie->use_ict)) {
ret = iwl_pcie_isr_non_ict(trans);
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
return ret;
}
trace_iwlwifi_dev_irq(trans->dev);
/* Ignore interrupt if there's nothing in NIC to service.
* This may be due to IRQ shared with another device,
* or due to sporadic interrupts thrown from our NIC. */
read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read);
if (!read) {
IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
goto none;
}
/*
* Collect all entries up to the first 0, starting from ict_index;
* note we already read at ict_index.
*/
do {
val |= read;
IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n",
trans_pcie->ict_index, read);
trans_pcie->ict_tbl[trans_pcie->ict_index] = 0;
trans_pcie->ict_index =
iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT);
read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index,
read);
} while (read);
/* We should not get this value, just ignore it. */
if (val == 0xffffffff)
val = 0;
/*
* this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
* (bit 15 before shifting it to 31) to clear when using interrupt
* coalescing. fortunately, bits 18 and 19 stay set when this happens
* so we use them to decide on the real state of the Rx bit.
* In order words, bit 15 is set if bit 18 or bit 19 are set.
*/
if (val & 0xC0000)
val |= 0x8000;
inta = (0xff & val) | ((0xff00 & val) << 16);
IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n",
inta, trans_pcie->inta_mask, val);
if (iwl_have_debug_level(IWL_DL_ISR))
IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n",
iwl_read32(trans, CSR_INT_MASK));
inta &= trans_pcie->inta_mask;
trans_pcie->inta |= inta;
/* iwl_pcie_tasklet() will service interrupts and re-enable them */
if (likely(inta)) {
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
return IRQ_WAKE_THREAD;
}
ret = IRQ_HANDLED;
none:
/* re-enable interrupts here since we don't have anything to service.
* only Re-enable if disabled by irq.
*/
if (test_bit(STATUS_INT_ENABLED, &trans->status) &&
!trans_pcie->inta)
iwl_enable_interrupts(trans);
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
return ret;
}
irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
{
struct iwl_trans *trans = dev_id;
@ -1019,11 +1181,6 @@ out:
*
******************************************************************************/
/* a device (PCI-E) page is 4096 bytes long */
#define ICT_SHIFT 12
#define ICT_SIZE (1 << ICT_SHIFT)
#define ICT_COUNT (ICT_SIZE / sizeof(u32))
/* Free dram table */
void iwl_pcie_free_ict(struct iwl_trans *trans)
{
@ -1110,163 +1267,6 @@ void iwl_pcie_disable_ict(struct iwl_trans *trans)
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
}
/* legacy (non-ICT) ISR. Assumes that trans_pcie->irq_lock is held */
static irqreturn_t iwl_pcie_isr_non_ict(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u32 inta;
lockdep_assert_held(&trans_pcie->irq_lock);
trace_iwlwifi_dev_irq(trans->dev);
/* Discover which interrupts are active/pending */
inta = iwl_read32(trans, CSR_INT);
if (inta & (~trans_pcie->inta_mask)) {
IWL_DEBUG_ISR(trans,
"We got a masked interrupt (0x%08x)...Ack and ignore\n",
inta & (~trans_pcie->inta_mask));
iwl_write32(trans, CSR_INT, inta & (~trans_pcie->inta_mask));
inta &= trans_pcie->inta_mask;
}
/* Ignore interrupt if there's nothing in NIC to service.
* This may be due to IRQ shared with another device,
* or due to sporadic interrupts thrown from our NIC. */
if (!inta) {
IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
/*
* Re-enable interrupts here since we don't have anything to
* service, but only in case the handler won't run. Note that
* the handler can be scheduled because of a previous
* interrupt.
*/
if (test_bit(STATUS_INT_ENABLED, &trans->status) &&
!trans_pcie->inta)
iwl_enable_interrupts(trans);
return IRQ_NONE;
}
if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
/* Hardware disappeared. It might have already raised
* an interrupt */
IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
return IRQ_HANDLED;
}
if (iwl_have_debug_level(IWL_DL_ISR))
IWL_DEBUG_ISR(trans,
"ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, trans_pcie->inta_mask,
iwl_read32(trans, CSR_FH_INT_STATUS));
trans_pcie->inta |= inta;
/* the thread will service interrupts and re-enable them */
return IRQ_WAKE_THREAD;
}
/* interrupt handler using ict table, with this interrupt driver will
* stop using INTA register to get device's interrupt, reading this register
* is expensive, device will write interrupts in ICT dram table, increment
* index then will fire interrupt to driver, driver will OR all ICT table
* entries from current index up to table entry with 0 value. the result is
* the interrupt we need to service, driver will set the entries back to 0 and
* set index.
*/
static irqreturn_t iwl_pcie_isr_ict(struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
unsigned long flags;
irqreturn_t ret;
u32 inta;
u32 val = 0;
u32 read;
spin_lock_irqsave(&trans_pcie->irq_lock, flags);
/* dram interrupt table not set yet,
* use legacy interrupt.
*/
if (unlikely(!trans_pcie->use_ict)) {
ret = iwl_pcie_isr_non_ict(trans);
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
return ret;
}
trace_iwlwifi_dev_irq(trans->dev);
/* Ignore interrupt if there's nothing in NIC to service.
* This may be due to IRQ shared with another device,
* or due to sporadic interrupts thrown from our NIC. */
read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read);
if (!read) {
IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
goto none;
}
/*
* Collect all entries up to the first 0, starting from ict_index;
* note we already read at ict_index.
*/
do {
val |= read;
IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n",
trans_pcie->ict_index, read);
trans_pcie->ict_tbl[trans_pcie->ict_index] = 0;
trans_pcie->ict_index =
iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT);
read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index,
read);
} while (read);
/* We should not get this value, just ignore it. */
if (val == 0xffffffff)
val = 0;
/*
* this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
* (bit 15 before shifting it to 31) to clear when using interrupt
* coalescing. fortunately, bits 18 and 19 stay set when this happens
* so we use them to decide on the real state of the Rx bit.
* In order words, bit 15 is set if bit 18 or bit 19 are set.
*/
if (val & 0xC0000)
val |= 0x8000;
inta = (0xff & val) | ((0xff00 & val) << 16);
IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n",
inta, trans_pcie->inta_mask, val);
if (iwl_have_debug_level(IWL_DL_ISR))
IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n",
iwl_read32(trans, CSR_INT_MASK));
inta &= trans_pcie->inta_mask;
trans_pcie->inta |= inta;
/* iwl_pcie_tasklet() will service interrupts and re-enable them */
if (likely(inta)) {
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
return IRQ_WAKE_THREAD;
}
ret = IRQ_HANDLED;
none:
/* re-enable interrupts here since we don't have anything to service.
* only Re-enable if disabled by irq.
*/
if (test_bit(STATUS_INT_ENABLED, &trans->status) &&
!trans_pcie->inta)
iwl_enable_interrupts(trans);
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
return ret;
}
irqreturn_t iwl_pcie_isr(int irq, void *data)
{
struct iwl_trans *trans = data;