forked from Minki/linux
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
Convert the regulators of Samsung S5M8767 PMIC to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Message-Id: <20211008113931.134847-3-krzysztof.kozlowski@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Krzysztof Kozlowski
Mark Brown
parent
a52afb0f54
commit
fab58debc1
@ -1,140 +0,0 @@
|
||||
Binding for Samsung S5M8767 regulator block
|
||||
===========================================
|
||||
|
||||
This is a part of device tree bindings for S5M family multi-function devices.
|
||||
More information can be found in bindings/mfd/sec-core.txt file.
|
||||
|
||||
The S5M8767 device provide buck and LDO regulators.
|
||||
|
||||
To register these with regulator framework instantiate under main device node
|
||||
a sub-node named "regulators" with more sub-nodes for each regulator using the
|
||||
common regulator binding documented in:
|
||||
- Documentation/devicetree/bindings/regulator/regulator.txt
|
||||
|
||||
|
||||
Required properties of the main device node (the parent!):
|
||||
- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
|
||||
for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
|
||||
|
||||
[1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
||||
property is specified, then all the eight voltage values for the
|
||||
's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
|
||||
|
||||
Optional properties of the main device node (the parent!):
|
||||
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck3 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
|
||||
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
|
||||
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
|
||||
|
||||
Additional properties required if either of the optional properties are used:
|
||||
|
||||
- s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
|
||||
the possible 8 options selectable by the dvs gpios. The value of this
|
||||
property should be between 0 and 7. If not specified or if out of range, the
|
||||
default value of this property is set to 0.
|
||||
|
||||
- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
|
||||
for dvs. The format of the gpio specifier depends in the gpio controller.
|
||||
|
||||
|
||||
Names of regulators supported by S5M8767 device:
|
||||
- LDOn
|
||||
- valid values for n are 1 to 28
|
||||
- Example: LDO1, LDO2, LDO28
|
||||
- BUCKn
|
||||
- valid values for n are 1 to 9.
|
||||
- Example: BUCK1, BUCK2, BUCK9
|
||||
Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
||||
as per the datasheet of device.
|
||||
|
||||
|
||||
Optional properties of the nodes under "regulators" sub-node:
|
||||
- op_mode: describes the different operating modes of the LDO's with
|
||||
power mode change in SOC. The different possible values are,
|
||||
0 - always off mode
|
||||
1 - on in normal mode
|
||||
2 - low power mode
|
||||
3 - suspend mode
|
||||
- s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
|
||||
GPIO controlling this regulator
|
||||
(enable/disable); This is valid only
|
||||
for buck9.
|
||||
|
||||
Example:
|
||||
|
||||
s5m8767_pmic@66 {
|
||||
compatible = "samsung,s5m8767-pmic";
|
||||
reg = <0x66>;
|
||||
|
||||
s5m8767,pmic-buck2-uses-gpio-dvs;
|
||||
s5m8767,pmic-buck3-uses-gpio-dvs;
|
||||
s5m8767,pmic-buck4-uses-gpio-dvs;
|
||||
|
||||
s5m8767,pmic-buck-default-dvs-idx = <0>;
|
||||
|
||||
s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
|
||||
<&gpx0 1 0>, /* DVS2 */
|
||||
<&gpx0 2 0>; /* DVS3 */
|
||||
|
||||
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
|
||||
<&gpx2 4 0>, /* SET2 */
|
||||
<&gpx2 5 0>; /* SET3 */
|
||||
|
||||
s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
|
||||
<1250000>, <1200000>,
|
||||
<1150000>, <1100000>,
|
||||
<1000000>, <950000>;
|
||||
|
||||
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
||||
<1100000>, <1100000>,
|
||||
<1000000>, <1000000>,
|
||||
<1000000>, <1000000>;
|
||||
|
||||
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>;
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ABB_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VDD_ALIVE_1.1V";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "VDD_MIF_1.2V";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vemmc_reg: BUCK9 {
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
op_mode = <3>; /* Standby Mode */
|
||||
s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,74 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung S5M8767 Power Management IC regulators
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
description: |
|
||||
This is a part of device tree bindings for S2M and S5M family of Power
|
||||
Management IC (PMIC).
|
||||
|
||||
The S5M8767 provides buck and LDO regulators.
|
||||
|
||||
See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
|
||||
additional information and example.
|
||||
|
||||
patternProperties:
|
||||
# 28 LDOs
|
||||
"^LDO([1-9]|1[0-9]|2[0-8])$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
Properties for single LDO regulator.
|
||||
|
||||
properties:
|
||||
op_mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 1
|
||||
description: |
|
||||
Describes the different operating modes of the LDO's with power mode
|
||||
change in SOC. The different possible values are:
|
||||
0 - always off mode
|
||||
1 - on in normal mode
|
||||
2 - low power mode
|
||||
3 - suspend mode
|
||||
|
||||
required:
|
||||
- regulator-name
|
||||
|
||||
# 8 bucks
|
||||
"^BUCK[1-8]$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
Properties for single BUCK regulator.
|
||||
|
||||
required:
|
||||
- regulator-name
|
||||
|
||||
# 9 buck
|
||||
"^BUCK9$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
Properties for single BUCK regulator.
|
||||
|
||||
properties:
|
||||
s5m8767,pmic-ext-control-gpios:
|
||||
maxItems: 1
|
||||
description: |
|
||||
GPIO specifier for one GPIO controlling this regulator on/off.
|
||||
|
||||
required:
|
||||
- regulator-name
|
||||
|
||||
additionalProperties: false
|
||||
@ -16333,7 +16333,7 @@ S: Supported
|
||||
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
|
||||
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
|
||||
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
|
||||
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
|
||||
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
|
||||
F: drivers/clk/clk-s2mps11.c
|
||||
F: drivers/mfd/sec*.c
|
||||
F: drivers/regulator/s2m*.c
|
||||
|
||||
Loading…
Reference in New Issue
Block a user