Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Completely minor snmp doc conflict.

Signed-off-by: David S. Miller <davem@davemloft.net>

.clang-format

@@ -72,6 +72,10 @@ ForEachMacros:
   - 'apei_estatus_for_each_section'
   - 'ata_for_each_dev'
   - 'ata_for_each_link'
+  - '__ata_qc_for_each'
+  - 'ata_qc_for_each'
+  - 'ata_qc_for_each_raw'
+  - 'ata_qc_for_each_with_internal'
   - 'ax25_for_each'
   - 'ax25_uid_for_each'
   - 'bio_for_each_integrity_vec'
@@ -85,6 +89,7 @@ ForEachMacros:
   - 'blk_queue_for_each_rl'
   - 'bond_for_each_slave'
   - 'bond_for_each_slave_rcu'
+  - 'bpf_for_each_spilled_reg'
   - 'btree_for_each_safe128'
   - 'btree_for_each_safe32'
   - 'btree_for_each_safe64'
@@ -103,6 +108,8 @@ ForEachMacros:
   - 'drm_atomic_crtc_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane_state'
+  - 'drm_atomic_for_each_plane_damage'
+  - 'drm_connector_for_each_possible_encoder'
   - 'drm_for_each_connector_iter'
   - 'drm_for_each_crtc'
   - 'drm_for_each_encoder'
@@ -121,11 +128,21 @@ ForEachMacros:
   - 'for_each_bio'
   - 'for_each_board_func_rsrc'
   - 'for_each_bvec'
+  - 'for_each_card_components'
+  - 'for_each_card_links'
+  - 'for_each_card_links_safe'
+  - 'for_each_card_prelinks'
+  - 'for_each_card_rtds'
+  - 'for_each_card_rtds_safe'
+  - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
   - 'for_each_clear_bit_from'
   - 'for_each_cmsghdr'
   - 'for_each_compatible_node'
+  - 'for_each_component_dais'
+  - 'for_each_component_dais_safe'
+  - 'for_each_comp_order'
   - 'for_each_console'
   - 'for_each_cpu'
   - 'for_each_cpu_and'
@@ -133,6 +150,10 @@ ForEachMacros:
   - 'for_each_cpu_wrap'
   - 'for_each_dev_addr'
   - 'for_each_dma_cap_mask'
+  - 'for_each_dpcm_be'
+  - 'for_each_dpcm_be_rollback'
+  - 'for_each_dpcm_be_safe'
+  - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
   - 'for_each_efi_memory_desc'
@@ -149,6 +170,7 @@ ForEachMacros:
   - 'for_each_iommu'
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
+  - 'for_each_link_codecs'
   - 'for_each_lru'
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
@@ -160,6 +182,7 @@ ForEachMacros:
   - 'for_each_mem_range_rev'
   - 'for_each_migratetype_order'
   - 'for_each_msi_entry'
+  - 'for_each_msi_entry_safe'
   - 'for_each_net'
   - 'for_each_netdev'
   - 'for_each_netdev_continue'
@@ -183,12 +206,14 @@ ForEachMacros:
   - 'for_each_node_with_property'
   - 'for_each_of_allnodes'
   - 'for_each_of_allnodes_from'
+  - 'for_each_of_cpu_node'
   - 'for_each_of_pci_range'
   - 'for_each_old_connector_in_state'
   - 'for_each_old_crtc_in_state'
   - 'for_each_oldnew_connector_in_state'
   - 'for_each_oldnew_crtc_in_state'
   - 'for_each_oldnew_plane_in_state'
+  - 'for_each_oldnew_plane_in_state_reverse'
   - 'for_each_oldnew_private_obj_in_state'
   - 'for_each_old_plane_in_state'
   - 'for_each_old_private_obj_in_state'
@@ -206,14 +231,17 @@ ForEachMacros:
   - 'for_each_process'
   - 'for_each_process_thread'
   - 'for_each_property_of_node'
+  - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_resv_unavail_range'
+  - 'for_each_rtd_codec_dai'
+  - 'for_each_rtd_codec_dai_rollback'
   - 'for_each_rtdcom'
   - 'for_each_rtdcom_safe'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_sg'
   - 'for_each_sg_page'
+  - 'for_each_sibling_event'
   - '__for_each_thread'
   - 'for_each_thread'
   - 'for_each_zone'
@@ -251,6 +279,8 @@ ForEachMacros:
   - 'hlist_nulls_for_each_entry_from'
   - 'hlist_nulls_for_each_entry_rcu'
   - 'hlist_nulls_for_each_entry_safe'
+  - 'i3c_bus_for_each_i2cdev'
+  - 'i3c_bus_for_each_i3cdev'
   - 'ide_host_for_each_port'
   - 'ide_port_for_each_dev'
   - 'ide_port_for_each_present_dev'
@@ -267,11 +297,14 @@ ForEachMacros:
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
+  - 'list_for_each_codec'
+  - 'list_for_each_codec_safe'
   - 'list_for_each_entry'
   - 'list_for_each_entry_continue'
   - 'list_for_each_entry_continue_rcu'
   - 'list_for_each_entry_continue_reverse'
   - 'list_for_each_entry_from'
+  - 'list_for_each_entry_from_rcu'
   - 'list_for_each_entry_from_reverse'
   - 'list_for_each_entry_lockless'
   - 'list_for_each_entry_rcu'
@@ -291,6 +324,7 @@ ForEachMacros:
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
+  - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
   - 'netdev_for_each_lower_private_rcu'
@@ -357,12 +391,14 @@ ForEachMacros:
   - 'sk_nulls_for_each'
   - 'sk_nulls_for_each_from'
   - 'sk_nulls_for_each_rcu'
+  - 'snd_array_for_each'
   - 'snd_pcm_group_for_each_entry'
   - 'snd_soc_dapm_widget_for_each_path'
   - 'snd_soc_dapm_widget_for_each_path_safe'
   - 'snd_soc_dapm_widget_for_each_sink_path'
   - 'snd_soc_dapm_widget_for_each_source_path'
   - 'tb_property_for_each'
+  - 'tcf_exts_for_each_action'
   - 'udp_portaddr_for_each_entry'
   - 'udp_portaddr_for_each_entry_rcu'
   - 'usb_hub_for_each_child'
@@ -371,6 +407,11 @@ ForEachMacros:
   - 'v4l2_m2m_for_each_dst_buf_safe'
   - 'v4l2_m2m_for_each_src_buf'
   - 'v4l2_m2m_for_each_src_buf_safe'
+  - 'virtio_device_for_each_vq'
+  - 'xa_for_each'
+  - 'xas_for_each'
+  - 'xas_for_each_conflict'
+  - 'xas_for_each_marked'
   - 'zorro_for_each_dev'
 
 #IncludeBlocks: Preserve # Unknown to clang-format-5.0

Documentation/devicetree/bindings/arm/cpu-capacity.txt

@@ -235,4 +235,4 @@ cpus {
 ===========================================
 
 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml

Documentation/devicetree/bindings/arm/idle-states.txt

@@ -684,7 +684,7 @@ cpus {
 ===========================================
 
 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml
 
 [2] ARM Linux Kernel documentation - PSCI bindings
     Documentation/devicetree/bindings/arm/psci.txt

Documentation/devicetree/bindings/arm/sp810.txt

@@ -4,7 +4,7 @@ SP810 System Controller
 Required properties:
 
 - compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.txt
+		see Documentation/devicetree/bindings/arm/primecell.yaml
 		for more details
 		should be: "arm,sp810", "arm,primecell"
 

Documentation/devicetree/bindings/arm/topology.txt

@@ -472,4 +472,4 @@ cpus {
 
 ===============================================================================
 [1] ARM Linux kernel documentation
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml

Documentation/devicetree/bindings/clock/marvell,mmp2.txt

@@ -18,4 +18,4 @@ Required Properties:
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.
 
-All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
+All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.

Documentation/devicetree/bindings/display/arm,pl11x.txt

@@ -1,6 +1,6 @@
 * ARM PrimeCell Color LCD Controller PL110/PL111
 
-See also Documentation/devicetree/bindings/arm/primecell.txt
+See also Documentation/devicetree/bindings/arm/primecell.yaml
 
 Required properties:
 

Documentation/devicetree/bindings/gpio/gpio-mvebu.txt

@@ -14,8 +14,6 @@ Required properties:
 
     "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
     SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
-    and
     Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
     for specific details about the offset property.
 

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -78,7 +78,7 @@ Sub-nodes:
 PPI affinity can be expressed as a single "ppi-partitions" node,
 containing a set of sub-nodes, each with the following property:
 - affinity: Should be a list of phandles to CPU nodes (as described in
-Documentation/devicetree/bindings/arm/cpus.txt).
+  Documentation/devicetree/bindings/arm/cpus.yaml).
 
 GICv3 has one or more Interrupt Translation Services (ITS) that are
 used to route Message Signalled Interrupts (MSI) to the CPUs.

Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt

@@ -55,7 +55,7 @@ of these nodes are defined by the individual bindings for the specific function
 = EXAMPLE
 The following example represents the GLINK RPM node on a MSM8996 device, with
 the function for the "rpm_request" channel defined, which is used for
-regualtors and root clocks.
+regulators and root clocks.
 
 	apcs_glb: mailbox@9820000 {
 		compatible = "qcom,msm8996-apcs-hmss-global";

Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt

@@ -41,12 +41,12 @@ processor ID) and a string identifier.
 - qcom,local-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the local endpoint of this edge
+	Definition: specifies the identifier of the local endpoint of this edge
 
 - qcom,remote-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the remote endpoint of this edge
+	Definition: specifies the identifier of the remote endpoint of this edge
 
 = SUBNODES
 Each SMP2P pair contain a set of inbound and outbound entries, these are

Documentation/fb/fbcon.txt

@@ -163,6 +163,14 @@ C. Boot options
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
+7. fbcon=logo-pos:<location>
+
+	The only possible 'location' is 'center' (without quotes), and when
+	given, the bootup logo is moved from the default top-left corner
+	location to the center of the framebuffer. If more than one logo is
+	displayed due to multiple CPUs, the collected line of logos is moved
+	as a whole.
+
 C. Attaching, Detaching and Unloading
 
 Before going on to how to attach, detach and unload the framebuffer console, an

Documentation/networking/index.rst

@@ -11,19 +11,19 @@ Contents:
    batman-adv
    can
    can_ucan_protocol
-   dpaa2/index
+   device_drivers/freescale/dpaa2/index
-   e100
+   device_drivers/intel/e100
-   e1000
+   device_drivers/intel/e1000
-   e1000e
+   device_drivers/intel/e1000e
-   fm10k
+   device_drivers/intel/fm10k
-   igb
+   device_drivers/intel/igb
-   igbvf
+   device_drivers/intel/igbvf
-   ixgb
+   device_drivers/intel/ixgb
-   ixgbe
+   device_drivers/intel/ixgbe
-   ixgbevf
+   device_drivers/intel/ixgbevf
-   i40e
+   device_drivers/intel/i40e
-   iavf
+   device_drivers/intel/iavf
-   ice
+   device_drivers/intel/ice
    kapi
    z8530book
    msg_zerocopy

Documentation/networking/rxrpc.txt

@@ -1000,51 +1000,6 @@ The kernel interface functions are as follows:
      size should be set when the call is begun.  tx_total_len may not be less
      than zero.
 
- (*) Check to see the completion state of a call so that the caller can assess
-     whether it needs to be retried.
-
-	enum rxrpc_call_completion {
-		RXRPC_CALL_SUCCEEDED,
-		RXRPC_CALL_REMOTELY_ABORTED,
-		RXRPC_CALL_LOCALLY_ABORTED,
-		RXRPC_CALL_LOCAL_ERROR,
-		RXRPC_CALL_NETWORK_ERROR,
-	};
-
-	int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call,
-				    enum rxrpc_call_completion *_compl,
-				    u32 *_abort_code);
-
-     On return, -EINPROGRESS will be returned if the call is still ongoing; if
-     it is finished, *_compl will be set to indicate the manner of completion,
-     *_abort_code will be set to any abort code that occurred.  0 will be
-     returned on a successful completion, -ECONNABORTED will be returned if the
-     client failed due to a remote abort and anything else will return an
-     appropriate error code.
-
-     The caller should look at this information to decide if it's worth
-     retrying the call.
-
- (*) Retry a client call.
-
-	int rxrpc_kernel_retry_call(struct socket *sock,
-				    struct rxrpc_call *call,
-				    struct sockaddr_rxrpc *srx,
-				    struct key *key);
-
-     This attempts to partially reinitialise a call and submit it again while
-     reusing the original call's Tx queue to avoid the need to repackage and
-     re-encrypt the data to be sent.  call indicates the call to retry, srx the
-     new address to send it to and key the encryption key to use for signing or
-     encrypting the packets.
-
-     For this to work, the first Tx data packet must still be in the transmit
-     queue, and currently this is only permitted for local and network errors
-     and the call must not have been aborted.  Any partially constructed Tx
-     packet is left as is and can continue being filled afterwards.
-
-     It returns 0 if the call was requeued and an error otherwise.
-
  (*) Get call RTT.
 
 	u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call);

Documentation/networking/snmp_counter.rst

@@ -366,6 +366,27 @@ to the accept queue.
 
 TCP Fast Open
 =============
+* TcpEstabResets
+Defined in `RFC1213 tcpEstabResets`_.
+
+.. _RFC1213 tcpEstabResets: https://tools.ietf.org/html/rfc1213#page-48
+
+* TcpAttemptFails
+Defined in `RFC1213 tcpAttemptFails`_.
+
+.. _RFC1213 tcpAttemptFails: https://tools.ietf.org/html/rfc1213#page-48
+
+* TcpOutRsts
+Defined in `RFC1213 tcpOutRsts`_. The RFC says this counter indicates
+the 'segments sent containing the RST flag', but in linux kernel, this
+couner indicates the segments kerenl tried to send. The sending
+process might be failed due to some errors (e.g. memory alloc failed).
+
+.. _RFC1213 tcpOutRsts: https://tools.ietf.org/html/rfc1213#page-52
+
+
+TCP Fast Path
+============
 When kernel receives a TCP packet, it has two paths to handler the
 packet, one is fast path, another is slow path. The comment in kernel
 code provides a good explanation of them, I pasted them below::
@@ -413,7 +434,6 @@ increase 1.
 
 TCP abort
 =========
-
 * TcpExtTCPAbortOnData
 
 It means TCP layer has data in flight, but need to close the
@@ -589,7 +609,6 @@ packet yet, the sender would know packet 4 is out of order. The TCP
 stack of kernel will increase TcpExtTCPSACKReorder for both of the
 above scenarios.
 
-
 DSACK
 =====
 The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report
@@ -612,8 +631,7 @@ The TCP stack receives an out of order duplicate packet, so it sends a
 DSACK to the sender.
 
 * TcpExtTCPDSACKRecv
-
+The TCP stack receives a DSACK, which indicates an acknowledged
-The TCP stack receives a DSACK, which indicate an acknowledged
 duplicate packet is received.
 
 * TcpExtTCPDSACKOfoRecv
@@ -621,6 +639,56 @@ duplicate packet is received.
 The TCP stack receives a DSACK, which indicate an out of order
 duplicate packet is received.
 
+invalid SACK and DSACK
+====================
+When a SACK (or DSACK) block is invalid, a corresponding counter would
+be updated. The validation method is base on the start/end sequence
+number of the SACK block. For more details, please refer the comment
+of the function tcp_is_sackblock_valid in the kernel source code. A
+SACK option could have up to 4 blocks, they are checked
+individually. E.g., if 3 blocks of a SACk is invalid, the
+corresponding counter would be updated 3 times. The comment of the
+`Add counters for discarded SACK blocks`_ patch has additional
+explaination:
+
+.. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32
+
+* TcpExtTCPSACKDiscard
+This counter indicates how many SACK blocks are invalid. If the invalid
+SACK block is caused by ACK recording, the TCP stack will only ignore
+it and won't update this counter.
+
+* TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo
+When a DSACK block is invalid, one of these two counters would be
+updated. Which counter will be updated depends on the undo_marker flag
+of the TCP socket. If the undo_marker is not set, the TCP stack isn't
+likely to re-transmit any packets, and we still receive an invalid
+DSACK block, the reason might be that the packet is duplicated in the
+middle of the network. In such scenario, TcpExtTCPDSACKIgnoredNoUndo
+will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld
+will be updated. As implied in its name, it might be an old packet.
+
+SACK shift
+=========
+The linux networking stack stores data in sk_buff struct (skb for
+short). If a SACK block acrosses multiple skb, the TCP stack will try
+to re-arrange data in these skb. E.g. if a SACK block acknowledges seq
+10 to 15, skb1 has seq 10 to 13, skb2 has seq 14 to 20. The seq 14 and
+15 in skb2 would be moved to skb1. This operation is 'shift'. If a
+SACK block acknowledges seq 10 to 20, skb1 has seq 10 to 13, skb2 has
+seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be
+discard, this operation is 'merge'.
+
+* TcpExtTCPSackShifted
+A skb is shifted
+
+* TcpExtTCPSackMerged
+A skb is merged
+
+* TcpExtTCPSackShiftFallback
+A skb should be shifted or merged, but the TCP stack doesn't do it for
+some reasons.
+
 TCP out of order
 ================
 * TcpExtTCPOFOQueue
@@ -721,6 +789,60 @@ unacknowledged number (more strict than `RFC 5961 section 5.2`_).
 .. _RFC 5961 section 4.2: https://tools.ietf.org/html/rfc5961#page-9
 .. _RFC 5961 section 5.2: https://tools.ietf.org/html/rfc5961#page-11
 
+TCP receive window
+=================
+* TcpExtTCPWantZeroWindowAdv
+Depending on current memory usage, the TCP stack tries to set receive
+window to zero. But the receive window might still be a no-zero
+value. For example, if the previous window size is 10, and the TCP
+stack receives 3 bytes, the current window size would be 7 even if the
+window size calculated by the memory usage is zero.
+
+* TcpExtTCPToZeroWindowAdv
+The TCP receive window is set to zero from a no-zero value.
+
+* TcpExtTCPFromZeroWindowAdv
+The TCP receive window is set to no-zero value from zero.
+
+
+Delayed ACK
+==========
+The TCP Delayed ACK is a technique which is used for reducing the
+packet count in the network. For more details, please refer the
+`Delayed ACK wiki`_
+
+.. _Delayed ACK wiki: https://en.wikipedia.org/wiki/TCP_delayed_acknowledgment
+
+* TcpExtDelayedACKs
+A delayed ACK timer expires. The TCP stack will send a pure ACK packet
+and exit the delayed ACK mode.
+
+* TcpExtDelayedACKLocked
+A delayed ACK timer expires, but the TCP stack can't send an ACK
+immediately due to the socket is locked by a userspace program. The
+TCP stack will send a pure ACK later (after the userspace program
+unlock the socket). When the TCP stack sends the pure ACK later, the
+TCP stack will also update TcpExtDelayedACKs and exit the delayed ACK
+mode.
+
+* TcpExtDelayedACKLost
+It will be updated when the TCP stack receives a packet which has been
+ACKed. A Delayed ACK loss might cause this issue, but it would also be
+triggered by other reasons, such as a packet is duplicated in the
+network.
+
+Tail Loss Probe (TLP)
+===================
+TLP is an algorithm which is used to detect TCP packet loss. For more
+details, please refer the `TLP paper`_.
+
+.. _TLP paper: https://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01
+
+* TcpExtTCPLossProbes
+A TLP probe packet is sent.
+
+* TcpExtTCPLossProbeRecovery
+A packet loss is detected and recovered by TLP.
 
 examples
 ========

Documentation/networking/timestamping.txt

@@ -417,7 +417,7 @@ is again deprecated and ts[2] holds a hardware timestamp if set.
 
 Hardware time stamping must also be initialized for each device driver
 that is expected to do hardware time stamping. The parameter is defined in
-/include/linux/net_tstamp.h as:
+include/uapi/linux/net_tstamp.h as:
 
 struct hwtstamp_config {
 	int flags;	/* no flags defined right now, must be zero */
@@ -487,7 +487,7 @@ enum {
 	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
 
 	/* for the complete list of values, please check
-	 * the include file /include/linux/net_tstamp.h
+	 * the include file include/uapi/linux/net_tstamp.h
 	 */
 };
 

MAINTAINERS

@@ -3471,10 +3471,9 @@ F:	drivers/i2c/busses/i2c-octeon*
 F:	drivers/i2c/busses/i2c-thunderx*
 
 CAVIUM LIQUIDIO NETWORK DRIVER
-M:	Derek Chickles <derek.chickles@caviumnetworks.com>
+M:	Derek Chickles <dchickles@marvell.com>
-M:	Satanand Burla <satananda.burla@caviumnetworks.com>
+M:	Satanand Burla <sburla@marvell.com>
-M:	Felix Manlunas <felix.manlunas@caviumnetworks.com>
+M:	Felix Manlunas <fmanlunas@marvell.com>
-M:	Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
 L:	netdev@vger.kernel.org
 W:	http://www.cavium.com
 S:	Supported

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Shy Crocodile
 
 # *DOCUMENTATION*
@@ -955,6 +955,7 @@ ifdef CONFIG_STACK_VALIDATION
   endif
 endif
 
+PHONY += prepare0
 
 ifeq ($(KBUILD_EXTMOD),)
 core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
@@ -1061,8 +1062,7 @@ scripts: scripts_basic scripts_dtc
 # archprepare is used in arch Makefiles and when processed asm symlink,
 # version.h and scripts_basic is processed / created.
 
-# Listed in dependency order
+PHONY += prepare archprepare prepare1 prepare2 prepare3
-PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 
 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
@@ -1360,11 +1360,11 @@ mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,scripts)
 
-PHONY += $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
-mrproper: clean archmrproper $(mrproper-dirs)
+mrproper: clean $(mrproper-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 

arch/arm64/include/asm/cache.h

@@ -60,8 +60,6 @@
 
 #ifdef CONFIG_KASAN_SW_TAGS
 #define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
-#else
-#define ARCH_SLAB_MINALIGN	__alignof__(unsigned long long)
 #endif
 
 #ifndef __ASSEMBLY__

arch/arm64/include/asm/mmu.h

@@ -60,8 +60,11 @@ static inline bool arm64_kernel_use_ng_mappings(void)
 	 * later determine that kpti is required, then
 	 * kpti_install_ng_mappings() will make them non-global.
 	 */
+	if (arm64_kernel_unmapped_at_el0())
+		return true;
+
 	if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
-		return arm64_kernel_unmapped_at_el0();
+		return false;
 
 	/*
 	 * KASLR is enabled so we're going to be enabling kpti on non-broken

arch/arm64/kernel/kaslr.c

@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 
+#include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 #include <asm/kernel-pgtable.h>
 #include <asm/memory.h>
@@ -43,7 +44,7 @@ static __init u64 get_kaslr_seed(void *fdt)
 	return ret;
 }
 
-static __init const u8 *get_cmdline(void *fdt)
+static __init const u8 *kaslr_get_cmdline(void *fdt)
 {
 	static __initconst const u8 default_cmdline[] = CONFIG_CMDLINE;
 
@@ -109,7 +110,7 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	 * Check if 'nokaslr' appears on the command line, and
 	 * return 0 if that is the case.
 	 */
-	cmdline = get_cmdline(fdt);
+	cmdline = kaslr_get_cmdline(fdt);
 	str = strstr(cmdline, "nokaslr");
 	if (str == cmdline || (str > cmdline && *(str - 1) == ' '))
 		return 0;
@@ -169,5 +170,8 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
 	module_alloc_base &= PAGE_MASK;
 
+	__flush_dcache_area(&module_alloc_base, sizeof(module_alloc_base));
+	__flush_dcache_area(&memstart_offset_seed, sizeof(memstart_offset_seed));
+
 	return offset;
 }

arch/h8300/Makefile

@@ -37,8 +37,6 @@ libs-y	+= arch/$(ARCH)/lib/
 
 boot := arch/h8300/boot
 
-archmrproper:
-
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 

arch/ia64/Makefile

@@ -16,8 +16,6 @@ KBUILD_DEFCONFIG := generic_defconfig
 NM := $(CROSS_COMPILE)nm -B
 READELF := $(CROSS_COMPILE)readelf
 
-export AWK
-
 CHECKFLAGS	+= -D__ia64=1 -D__ia64__=1 -D_LP64 -D__LP64__
 
 OBJCOPYFLAGS	:= --strip-all

arch/mips/Kconfig

@@ -3155,6 +3155,7 @@ config MIPS32_O32
 config MIPS32_N32
 	bool "Kernel support for n32 binaries"
 	depends on 64BIT
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select COMPAT
 	select MIPS32_COMPAT
 	select SYSVIPC_COMPAT if SYSVIPC

arch/mips/bcm47xx/setup.c

@@ -173,6 +173,31 @@ void __init plat_mem_setup(void)
 	pm_power_off = bcm47xx_machine_halt;
 }
 
+#ifdef CONFIG_BCM47XX_BCMA
+static struct device * __init bcm47xx_setup_device(void)
+{
+	struct device *dev;
+	int err;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	err = dev_set_name(dev, "bcm47xx_soc");
+	if (err) {
+		pr_err("Failed to set SoC device name: %d\n", err);
+		kfree(dev);
+		return NULL;
+	}
+
+	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (err)
+		pr_err("Failed to set SoC DMA mask: %d\n", err);
+
+	return dev;
+}
+#endif
+
 /*
  * This finishes bus initialization doing things that were not possible without
  * kmalloc. Make sure to call it late enough (after mm_init).
@@ -183,6 +208,10 @@ void __init bcm47xx_bus_setup(void)
 	if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
 		int err;
 
+		bcm47xx_bus.bcma.dev = bcm47xx_setup_device();
+		if (!bcm47xx_bus.bcma.dev)
+			panic("Failed to setup SoC device\n");
+
 		err = bcma_host_soc_init(&bcm47xx_bus.bcma);
 		if (err)
 			panic("Failed to initialize BCMA bus (err %d)", err);
@@ -235,6 +264,8 @@ static int __init bcm47xx_register_bus_complete(void)
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
+		if (device_register(bcm47xx_bus.bcma.dev))
+			pr_err("Failed to register SoC device\n");
 		bcma_bus_register(&bcm47xx_bus.bcma.bus);
 		break;
 #endif

arch/mips/cavium-octeon/setup.c

@@ -98,7 +98,7 @@ static void octeon_kexec_smp_down(void *ignored)
 	"	sync						\n"
 	"	synci	($0)					\n");
 
-	relocated_kexec_smp_wait(NULL);
+	kexec_reboot();
 }
 #endif
 

arch/mips/configs/ath79_defconfig

@@ -66,6 +66,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AR933X=y
 CONFIG_SERIAL_AR933X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set

arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h

@@ -18,8 +18,6 @@
 #define INT_NUM_EXTRA_START		(INT_NUM_IM4_IRL0 + 32)
 #define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
 
-#define MIPS_CPU_TIMER_IRQ			7
-
 #define MAX_IM			5
 
 #endif /* _FALCON_IRQ__ */

arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h

@@ -19,8 +19,6 @@
 
 #define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
 
-#define MIPS_CPU_TIMER_IRQ	7
-
 #define MAX_IM			5
 
 #endif

arch/mips/jazz/jazzdma.c

@@ -74,14 +74,15 @@ static int __init vdma_init(void)
 						    get_order(VDMA_PGTBL_SIZE));
 	BUG_ON(!pgtbl);
 	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
-	pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
 
 	/*
 	 * Clear the R4030 translation table
 	 */
 	vdma_pgtbl_init();
 
-	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
 

arch/mips/lantiq/irq.c

@@ -224,9 +224,11 @@ static struct irq_chip ltq_eiu_type = {
 	.irq_set_type = ltq_eiu_settype,
 };
 
-static void ltq_hw_irqdispatch(int module)
+static void ltq_hw_irq_handler(struct irq_desc *desc)
 {
+	int module = irq_desc_get_irq(desc) - 2;
 	u32 irq;
+	int hwirq;
 
 	irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR);
 	if (irq == 0)
@@ -237,7 +239,8 @@ static void ltq_hw_irqdispatch(int module)
 	 * other bits might be bogus
 	 */
 	irq = __fls(irq);
-	do_IRQ((int)irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module));
+	hwirq = irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module);
+	generic_handle_irq(irq_linear_revmap(ltq_domain, hwirq));
 
 	/* if this is a EBU irq, we need to ack it or get a deadlock */
 	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
@@ -245,49 +248,6 @@ static void ltq_hw_irqdispatch(int module)
 			LTQ_EBU_PCC_ISTAT);
 }
 
-#define DEFINE_HWx_IRQDISPATCH(x)					\
-	static void ltq_hw ## x ## _irqdispatch(void)			\
-	{								\
-		ltq_hw_irqdispatch(x);					\
-	}
-DEFINE_HWx_IRQDISPATCH(0)
-DEFINE_HWx_IRQDISPATCH(1)
-DEFINE_HWx_IRQDISPATCH(2)
-DEFINE_HWx_IRQDISPATCH(3)
-DEFINE_HWx_IRQDISPATCH(4)
-
-#if MIPS_CPU_TIMER_IRQ == 7
-static void ltq_hw5_irqdispatch(void)
-{
-	do_IRQ(MIPS_CPU_TIMER_IRQ);
-}
-#else
-DEFINE_HWx_IRQDISPATCH(5)
-#endif
-
-static void ltq_hw_irq_handler(struct irq_desc *desc)
-{
-	ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-	int irq;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
 static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	struct irq_chip *chip = &ltq_irq_type;
@@ -343,38 +303,13 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	for (i = 0; i < MAX_IM; i++)
 		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
 
-	if (cpu_has_vint) {
-		pr_info("Setting up vectored interrupts\n");
-		set_vi_handler(2, ltq_hw0_irqdispatch);
-		set_vi_handler(3, ltq_hw1_irqdispatch);
-		set_vi_handler(4, ltq_hw2_irqdispatch);
-		set_vi_handler(5, ltq_hw3_irqdispatch);
-		set_vi_handler(6, ltq_hw4_irqdispatch);
-		set_vi_handler(7, ltq_hw5_irqdispatch);
-	}
-
 	ltq_domain = irq_domain_add_linear(node,
 		(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
 		&irq_domain_ops, 0);
 
-#ifndef CONFIG_MIPS_MT_SMP
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
-		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#else
-	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
-		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#endif
-
 	/* tell oprofile which irq to use */
 	ltq_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
 
-	/*
-	 * if the timer irq is not one of the mips irqs we need to
-	 * create a mapping
-	 */
-	if (MIPS_CPU_TIMER_IRQ != 7)
-		irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
-
 	/* the external interrupts are optional and xway only */
 	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
 	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
@@ -411,7 +346,7 @@ EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
 
 unsigned int get_c0_compare_int(void)
 {
-	return MIPS_CPU_TIMER_IRQ;
+	return CP0_LEGACY_COMPARE_IRQ;
 }
 
 static struct of_device_id __initdata of_irq_ids[] = {

arch/mips/pci/msi-octeon.c

@@ -369,7 +369,9 @@ int __init octeon_msi_initialize(void)
 	int irq;
 	struct irq_chip *msi;
 
-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_INVALID) {
+		return 0;
+	} else if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
 		msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0;
 		msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1;
 		msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2;

arch/nds32/Makefile

@@ -3,9 +3,6 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment -S
 
 KBUILD_DEFCONFIG := defconfig
 
-comma = ,
-
-
 ifdef CONFIG_FUNCTION_TRACER
 arch-y += -malways-save-lp -mno-relax
 endif
@@ -54,8 +51,6 @@ endif
 boot := arch/nds32/boot
 core-y += $(boot)/dts/
 
-.PHONY: FORCE
-
 Image: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
@@ -68,9 +63,6 @@ prepare: vdso_prepare
 vdso_prepare: prepare0
 	$(Q)$(MAKE) $(build)=arch/nds32/kernel/vdso include/generated/vdso-offsets.h
 
-CLEAN_FILES += include/asm-nds32/constants.h*
-
-# We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 

arch/openrisc/Makefile

@@ -20,7 +20,6 @@
 KBUILD_DEFCONFIG := or1ksim_defconfig
 
 OBJCOPYFLAGS    := -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux :=
 LIBGCC 		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
 KBUILD_CFLAGS	+= -pipe -ffixed-r10 -D__linux__
@@ -50,5 +49,3 @@ else
 BUILTIN_DTB := n
 endif
 core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/
-
-all: vmlinux

arch/powerpc/include/uapi/asm/perf_regs.h

@@ -47,6 +47,7 @@ enum perf_event_powerpc_regs {
 	PERF_REG_POWERPC_DAR,
 	PERF_REG_POWERPC_DSISR,
 	PERF_REG_POWERPC_SIER,
+	PERF_REG_POWERPC_MMCRA,
 	PERF_REG_POWERPC_MAX,
 };
 #endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */

arch/powerpc/kernel/head_8xx.S

@@ -852,11 +852,12 @@ start_here:
 
 	/* set up the PTE pointers for the Abatron bdiGDB.
 	*/
-	tovirt(r6,r6)
 	lis	r5, abatron_pteptrs@h
 	ori	r5, r5, abatron_pteptrs@l
 	stw	r5, 0xf0(0)	/* Must match your Abatron config file */
 	tophys(r5,r5)
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
 	stw	r6, 0(r5)
 
 /* Now turn on the MMU for real! */

arch/powerpc/kernel/signal_64.c

@@ -755,11 +755,12 @@ SYSCALL_DEFINE0(rt_sigreturn)
 		if (restore_tm_sigcontexts(current, &uc->uc_mcontext,
 					   &uc_transact->uc_mcontext))
 			goto badframe;
-	}
+	} else
 #endif
-	/* Fall through, for non-TM restore */
+	{
-	if (!MSR_TM_ACTIVE(msr)) {
 		/*
+		 * Fall through, for non-TM restore
+		 *
 		 * Unset MSR[TS] on the thread regs since MSR from user
 		 * context does not have MSR active, and recheckpoint was
 		 * not called since restore_tm_sigcontexts() was not called

arch/powerpc/kernel/trace/ftrace.c

@@ -967,13 +967,6 @@ out:
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
-#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64)
-unsigned long __init arch_syscall_addr(int nr)
-{
-	return sys_call_table[nr*2];
-}
-#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 */
-
 #ifdef PPC64_ELF_ABI_v1
 char *arch_ftrace_match_adjust(char *str, const char *search)
 {

arch/powerpc/perf/perf_regs.c

@@ -70,6 +70,7 @@ static unsigned int pt_regs_offset[PERF_REG_POWERPC_MAX] = {
 	PT_REGS_OFFSET(PERF_REG_POWERPC_DAR, dar),
 	PT_REGS_OFFSET(PERF_REG_POWERPC_DSISR, dsisr),
 	PT_REGS_OFFSET(PERF_REG_POWERPC_SIER, dar),
+	PT_REGS_OFFSET(PERF_REG_POWERPC_MMCRA, dsisr),
 };
 
 u64 perf_reg_value(struct pt_regs *regs, int idx)
@@ -83,6 +84,11 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
 	    !is_sier_available()))
 		return 0;
 
+	if (idx == PERF_REG_POWERPC_MMCRA &&
+	   (IS_ENABLED(CONFIG_FSL_EMB_PERF_EVENT) ||
+	    IS_ENABLED(CONFIG_PPC32)))
+		return 0;
+
 	return regs_get_register(regs, pt_regs_offset[idx]);
 }
 

arch/powerpc/platforms/4xx/ocm.c

@@ -237,12 +237,12 @@ static int ocm_debugfs_show(struct seq_file *m, void *v)
 			continue;
 
 		seq_printf(m, "PPC4XX OCM   : %d\n", ocm->index);
-		seq_printf(m, "PhysAddr     : %pa[p]\n", &(ocm->phys));
+		seq_printf(m, "PhysAddr     : %pa\n", &(ocm->phys));
 		seq_printf(m, "MemTotal     : %d Bytes\n", ocm->memtotal);
 		seq_printf(m, "MemTotal(NC) : %d Bytes\n", ocm->nc.memtotal);
 		seq_printf(m, "MemTotal(C)  : %d Bytes\n\n", ocm->c.memtotal);
 
-		seq_printf(m, "NC.PhysAddr  : %pa[p]\n", &(ocm->nc.phys));
+		seq_printf(m, "NC.PhysAddr  : %pa\n", &(ocm->nc.phys));
 		seq_printf(m, "NC.VirtAddr  : 0x%p\n", ocm->nc.virt);
 		seq_printf(m, "NC.MemTotal  : %d Bytes\n", ocm->nc.memtotal);
 		seq_printf(m, "NC.MemFree   : %d Bytes\n", ocm->nc.memfree);
@@ -252,7 +252,7 @@ static int ocm_debugfs_show(struct seq_file *m, void *v)
 							blk->size, blk->owner);
 		}
 
-		seq_printf(m, "\nC.PhysAddr   : %pa[p]\n", &(ocm->c.phys));
+		seq_printf(m, "\nC.PhysAddr   : %pa\n", &(ocm->c.phys));
 		seq_printf(m, "C.VirtAddr   : 0x%p\n", ocm->c.virt);
 		seq_printf(m, "C.MemTotal   : %d Bytes\n", ocm->c.memtotal);
 		seq_printf(m, "C.MemFree    : %d Bytes\n", ocm->c.memfree);

arch/powerpc/platforms/chrp/setup.c

@@ -538,8 +538,7 @@ static void __init chrp_init_IRQ(void)
 	/* see if there is a keyboard in the device tree
 	   with a parent of type "adb" */
 	for_each_node_by_name(kbd, "keyboard")
-		if (kbd->parent && kbd->parent->type
+		if (of_node_is_type(kbd->parent, "adb"))
-		    && strcmp(kbd->parent->type, "adb") == 0)
 			break;
 	of_node_put(kbd);
 	if (kbd)

arch/powerpc/platforms/powernv/npu-dma.c

@@ -564,7 +564,7 @@ struct iommu_table_group *pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
 		}
 	} else {
 		/* Create a group for 1 GPU and attached NPUs for POWER8 */
-		pe->npucomp = kzalloc(sizeof(pe->npucomp), GFP_KERNEL);
+		pe->npucomp = kzalloc(sizeof(*pe->npucomp), GFP_KERNEL);
 		table_group = &pe->npucomp->table_group;
 		table_group->ops = &pnv_npu_peers_ops;
 		iommu_register_group(table_group, hose->global_number,

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -2681,7 +2681,8 @@ static void pnv_pci_ioda_setup_iommu_api(void)
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
 
-		if (phb->type == PNV_PHB_NPU_NVLINK)
+		if (phb->type == PNV_PHB_NPU_NVLINK ||
+		    phb->type == PNV_PHB_NPU_OCAPI)
 			continue;
 
 		list_for_each_entry(pe, &phb->ioda.pe_list, list) {

arch/powerpc/platforms/pseries/pci.c

@@ -264,7 +264,9 @@ void __init pSeries_final_fixup(void)
 			if (!of_device_is_compatible(nvdn->parent,
 						"ibm,power9-npu"))
 				continue;
+#ifdef CONFIG_PPC_POWERNV
 			WARN_ON_ONCE(pnv_npu2_init(hose));
+#endif
 			break;
 		}
 	}

arch/x86/Kconfig

@@ -617,7 +617,7 @@ config X86_INTEL_QUARK
 
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
-	depends on X86 && ACPI
+	depends on X86 && ACPI && PCI
 	select COMMON_CLK
 	select PINCTRL
 	select IOSF_MBI

arch/x86/include/asm/uaccess.h

@@ -711,7 +711,7 @@ static __must_check inline bool user_access_begin(const void __user *ptr, size_t
 {
 	if (unlikely(!access_ok(ptr,len)))
 		return 0;
-	__uaccess_begin();
+	__uaccess_begin_nospec();
 	return 1;
 }
 #define user_access_begin(a,b)	user_access_begin(a,b)

arch/x86/xen/enlighten_pv.c

@@ -898,10 +898,7 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err)
 	val = native_read_msr_safe(msr, err);
 	switch (msr) {
 	case MSR_IA32_APICBASE:
-#ifdef CONFIG_X86_X2APIC
+		val &= ~X2APIC_ENABLE;
-		if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31))))
-#endif
-			val &= ~X2APIC_ENABLE;
 		break;
 	}
 	return val;

arch/x86/xen/time.c

@@ -361,8 +361,6 @@ void xen_timer_resume(void)
 {
 	int cpu;
 
-	pvclock_resume();
-
 	if (xen_clockevent != &xen_vcpuop_clockevent)
 		return;
 
@@ -379,12 +377,15 @@ static const struct pv_time_ops xen_time_ops __initconst = {
 };
 
 static struct pvclock_vsyscall_time_info *xen_clock __read_mostly;
+static u64 xen_clock_value_saved;
 
 void xen_save_time_memory_area(void)
 {
 	struct vcpu_register_time_memory_area t;
 	int ret;
 
+	xen_clock_value_saved = xen_clocksource_read() - xen_sched_clock_offset;
+
 	if (!xen_clock)
 		return;
 
@@ -404,7 +405,7 @@ void xen_restore_time_memory_area(void)
 	int ret;
 
 	if (!xen_clock)
-		return;
+		goto out;
 
 	t.addr.v = &xen_clock->pvti;
 
@@ -421,6 +422,11 @@ void xen_restore_time_memory_area(void)
 	if (ret != 0)
 		pr_notice("Cannot restore secondary vcpu_time_info (err %d)",
 			  ret);
+
+out:
+	/* Need pvclock_resume() before using xen_clocksource_read(). */
+	pvclock_resume();
+	xen_sched_clock_offset = xen_clocksource_read() - xen_clock_value_saved;
 }
 
 static void xen_setup_vsyscall_time_info(void)

block/bfq-wf2q.c

@@ -1154,15 +1154,14 @@ static void bfq_activate_requeue_entity(struct bfq_entity *entity,
 }
 
 /**
- * __bfq_deactivate_entity - deactivate an entity from its service tree.
+ * __bfq_deactivate_entity - update sched_data and service trees for
- * @entity: the entity to deactivate.
+ * entity, so as to represent entity as inactive
+ * @entity: the entity being deactivated.
  * @ins_into_idle_tree: if false, the entity will not be put into the
  *			idle tree.
  *
- * Deactivates an entity, independently of its previous state.  Must
+ * If necessary and allowed, puts entity into the idle tree. NOTE:
- * be invoked only if entity is on a service tree. Extracts the entity
+ * entity may be on no tree if in service.
- * from that tree, and if necessary and allowed, puts it into the idle
- * tree.
  */
 bool __bfq_deactivate_entity(struct bfq_entity *entity, bool ins_into_idle_tree)
 {

block/blk-mq-debugfs-zoned.c

@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017 Western Digital Corporation or its affiliates.
- *
- * This file is released under the GPL.
  */
 
 #include <linux/blkdev.h>

block/blk-mq.c

@@ -1906,7 +1906,7 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 {
 	const int is_sync = op_is_sync(bio->bi_opf);
 	const int is_flush_fua = op_is_flush(bio->bi_opf);
-	struct blk_mq_alloc_data data = { .flags = 0, .cmd_flags = bio->bi_opf };
+	struct blk_mq_alloc_data data = { .flags = 0};
 	struct request *rq;
 	struct blk_plug *plug;
 	struct request *same_queue_rq = NULL;
@@ -1928,6 +1928,7 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 
 	rq_qos_throttle(q, bio);
 
+	data.cmd_flags = bio->bi_opf;
 	rq = blk_mq_get_request(q, bio, &data);
 	if (unlikely(!rq)) {
 		rq_qos_cleanup(q, bio);

crypto/adiantum.c

@@ -539,6 +539,8 @@ static int adiantum_create(struct crypto_template *tmpl, struct rtattr **tb)
 	ictx = skcipher_instance_ctx(inst);
 
 	/* Stream cipher, e.g. "xchacha12" */
+	crypto_set_skcipher_spawn(&ictx->streamcipher_spawn,
+				  skcipher_crypto_instance(inst));
 	err = crypto_grab_skcipher(&ictx->streamcipher_spawn, streamcipher_name,
 				   0, crypto_requires_sync(algt->type,
 							   algt->mask));
@@ -547,6 +549,8 @@ static int adiantum_create(struct crypto_template *tmpl, struct rtattr **tb)
 	streamcipher_alg = crypto_spawn_skcipher_alg(&ictx->streamcipher_spawn);
 
 	/* Block cipher, e.g. "aes" */
+	crypto_set_spawn(&ictx->blockcipher_spawn,
+			 skcipher_crypto_instance(inst));
 	err = crypto_grab_spawn(&ictx->blockcipher_spawn, blockcipher_name,
 				CRYPTO_ALG_TYPE_CIPHER, CRYPTO_ALG_TYPE_MASK);
 	if (err)

crypto/authenc.c

@@ -58,14 +58,22 @@ int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
 		return -EINVAL;
 	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
 		return -EINVAL;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
+
+	/*
+	 * RTA_OK() didn't align the rtattr's payload when validating that it
+	 * fits in the buffer.  Yet, the keys should start on the next 4-byte
+	 * aligned boundary.  To avoid confusion, require that the rtattr
+	 * payload be exactly the param struct, which has a 4-byte aligned size.
+	 */
+	if (RTA_PAYLOAD(rta) != sizeof(*param))
 		return -EINVAL;
+	BUILD_BUG_ON(sizeof(*param) % RTA_ALIGNTO);
 
 	param = RTA_DATA(rta);
 	keys->enckeylen = be32_to_cpu(param->enckeylen);
 
-	key += RTA_ALIGN(rta->rta_len);
+	key += rta->rta_len;
-	keylen -= RTA_ALIGN(rta->rta_len);
+	keylen -= rta->rta_len;
 
 	if (keylen < keys->enckeylen)
 		return -EINVAL;

crypto/authencesn.c

@@ -279,7 +279,7 @@ static void authenc_esn_verify_ahash_done(struct crypto_async_request *areq,
 	struct aead_request *req = areq->data;
 
 	err = err ?: crypto_authenc_esn_decrypt_tail(req, 0);
-	aead_request_complete(req, err);
+	authenc_esn_request_complete(req, err);
 }
 
 static int crypto_authenc_esn_decrypt(struct aead_request *req)

crypto/sm3_generic.c

@@ -100,7 +100,7 @@ static void sm3_compress(u32 *w, u32 *wt, u32 *m)
 
 	for (i = 0; i <= 63; i++) {
 
-		ss1 = rol32((rol32(a, 12) + e + rol32(t(i), i)), 7);
+		ss1 = rol32((rol32(a, 12) + e + rol32(t(i), i & 31)), 7);
 
 		ss2 = ss1 ^ rol32(a, 12);
 

drivers/acpi/Makefile

@@ -41,7 +41,8 @@ acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-$(CONFIG_PCI)		+= pci_root.o pci_link.o pci_irq.o
 obj-$(CONFIG_ACPI_MCFG)		+= pci_mcfg.o
-acpi-y				+= acpi_lpss.o acpi_apd.o
+acpi-$(CONFIG_PCI)		+= acpi_lpss.o
+acpi-y				+= acpi_apd.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= acpi_pnp.o
 acpi-$(CONFIG_ARM_AMBA)	+= acpi_amba.o

drivers/acpi/bus.c

@@ -1054,18 +1054,6 @@ void __init acpi_early_init(void)
 		goto error0;
 	}
 
-	/*
-	 * ACPI 2.0 requires the EC driver to be loaded and work before
-	 * the EC device is found in the namespace (i.e. before
-	 * acpi_load_tables() is called).
-	 *
-	 * This is accomplished by looking for the ECDT table, and getting
-	 * the EC parameters out of that.
-	 *
-	 * Ignore the result. Not having an ECDT is not fatal.
-	 */
-	status = acpi_ec_ecdt_probe();
-
 #ifdef CONFIG_X86
 	if (!acpi_ioapic) {
 		/* compatible (0) means level (3) */
@@ -1142,6 +1130,18 @@ static int __init acpi_bus_init(void)
 		goto error1;
 	}
 
+	/*
+	 * ACPI 2.0 requires the EC driver to be loaded and work before the EC
+	 * device is found in the namespace.
+	 *
+	 * This is accomplished by looking for the ECDT table and getting the EC
+	 * parameters out of that.
+	 *
+	 * Do that before calling acpi_initialize_objects() which may trigger EC
+	 * address space accesses.
+	 */
+	acpi_ec_ecdt_probe();
+
 	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX

drivers/acpi/internal.h

@@ -81,7 +81,11 @@ void acpi_debugfs_init(void);
 #else
 static inline void acpi_debugfs_init(void) { return; }
 #endif
+#ifdef CONFIG_PCI
 void acpi_lpss_init(void);
+#else
+static inline void acpi_lpss_init(void) {}
+#endif
 
 void acpi_apd_init(void);
 

drivers/acpi/nfit/core.c

@@ -26,7 +26,6 @@
 #include <acpi/nfit.h>
 #include "intel.h"
 #include "nfit.h"
-#include "intel.h"
 
 /*
  * For readq() and writeq() on 32-bit builds, the hi-lo, lo-hi order is
@@ -78,12 +77,6 @@ const guid_t *to_nfit_uuid(enum nfit_uuids id)
 }
 EXPORT_SYMBOL(to_nfit_uuid);
 
-static struct acpi_nfit_desc *to_acpi_nfit_desc(
-		struct nvdimm_bus_descriptor *nd_desc)
-{
-	return container_of(nd_desc, struct acpi_nfit_desc, nd_desc);
-}
-
 static struct acpi_device *to_acpi_dev(struct acpi_nfit_desc *acpi_desc)
 {
 	struct nvdimm_bus_descriptor *nd_desc = &acpi_desc->nd_desc;
@@ -419,7 +412,7 @@ static bool payload_dumpable(struct nvdimm *nvdimm, unsigned int func)
 int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
 		unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
 {
-	struct acpi_nfit_desc *acpi_desc = to_acpi_nfit_desc(nd_desc);
+	struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc);
 	struct nfit_mem *nfit_mem = nvdimm_provider_data(nvdimm);
 	union acpi_object in_obj, in_buf, *out_obj;
 	const struct nd_cmd_desc *desc = NULL;
@@ -721,6 +714,7 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)
 	struct acpi_nfit_memory_map *memdev;
 	struct acpi_nfit_desc *acpi_desc;
 	struct nfit_mem *nfit_mem;
+	u16 physical_id;
 
 	mutex_lock(&acpi_desc_lock);
 	list_for_each_entry(acpi_desc, &acpi_descs, list) {
@@ -728,10 +722,11 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)
 		list_for_each_entry(nfit_mem, &acpi_desc->dimms, list) {
 			memdev = __to_nfit_memdev(nfit_mem);
 			if (memdev->device_handle == device_handle) {
+				*flags = memdev->flags;
+				physical_id = memdev->physical_id;
 				mutex_unlock(&acpi_desc->init_mutex);
 				mutex_unlock(&acpi_desc_lock);
-				*flags = memdev->flags;
+				return physical_id;
-				return memdev->physical_id;
 			}
 		}
 		mutex_unlock(&acpi_desc->init_mutex);
@@ -2231,7 +2226,6 @@ static int acpi_nfit_init_interleave_set(struct acpi_nfit_desc *acpi_desc,
 	nd_set = devm_kzalloc(dev, sizeof(*nd_set), GFP_KERNEL);
 	if (!nd_set)
 		return -ENOMEM;
-	ndr_desc->nd_set = nd_set;
 	guid_copy(&nd_set->type_guid, (guid_t *) spa->range_guid);
 
 	info = devm_kzalloc(dev, sizeof_nfit_set_info(nr), GFP_KERNEL);
@@ -3367,7 +3361,7 @@ EXPORT_SYMBOL_GPL(acpi_nfit_init);
 
 static int acpi_nfit_flush_probe(struct nvdimm_bus_descriptor *nd_desc)
 {
-	struct acpi_nfit_desc *acpi_desc = to_acpi_nfit_desc(nd_desc);
+	struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc);
 	struct device *dev = acpi_desc->dev;
 
 	/* Bounce the device lock to flush acpi_nfit_add / acpi_nfit_notify */
@@ -3384,7 +3378,7 @@ static int acpi_nfit_flush_probe(struct nvdimm_bus_descriptor *nd_desc)
 static int __acpi_nfit_clear_to_send(struct nvdimm_bus_descriptor *nd_desc,
 		struct nvdimm *nvdimm, unsigned int cmd)
 {
-	struct acpi_nfit_desc *acpi_desc = to_acpi_nfit_desc(nd_desc);
+	struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc);
 
 	if (nvdimm)
 		return 0;

drivers/acpi/nfit/intel.c

@@ -146,7 +146,7 @@ static int intel_security_change_key(struct nvdimm *nvdimm,
 
 static void nvdimm_invalidate_cache(void);
 
-static int intel_security_unlock(struct nvdimm *nvdimm,
+static int __maybe_unused intel_security_unlock(struct nvdimm *nvdimm,
 		const struct nvdimm_key_data *key_data)
 {
 	struct nfit_mem *nfit_mem = nvdimm_provider_data(nvdimm);
@@ -227,7 +227,7 @@ static int intel_security_disable(struct nvdimm *nvdimm,
 	return 0;
 }
 
-static int intel_security_erase(struct nvdimm *nvdimm,
+static int __maybe_unused intel_security_erase(struct nvdimm *nvdimm,
 		const struct nvdimm_key_data *key,
 		enum nvdimm_passphrase_type ptype)
 {
@@ -276,7 +276,7 @@ static int intel_security_erase(struct nvdimm *nvdimm,
 	return 0;
 }
 
-static int intel_security_query_overwrite(struct nvdimm *nvdimm)
+static int __maybe_unused intel_security_query_overwrite(struct nvdimm *nvdimm)
 {
 	int rc;
 	struct nfit_mem *nfit_mem = nvdimm_provider_data(nvdimm);
@@ -313,7 +313,7 @@ static int intel_security_query_overwrite(struct nvdimm *nvdimm)
 	return 0;
 }
 
-static int intel_security_overwrite(struct nvdimm *nvdimm,
+static int __maybe_unused intel_security_overwrite(struct nvdimm *nvdimm,
 		const struct nvdimm_key_data *nkey)
 {
 	int rc;

drivers/ata/Kconfig

@@ -1091,7 +1091,7 @@ comment "Generic fallback / legacy drivers"
 
 config PATA_ACPI
 	tristate "ACPI firmware driver for PATA"
-	depends on ATA_ACPI && ATA_BMDMA
+	depends on ATA_ACPI && ATA_BMDMA && PCI
 	help
 	  This option enables an ACPI method driver which drives
 	  motherboard PATA controller interfaces through the ACPI

drivers/atm/he.c

@@ -718,7 +718,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev)
 			instead of '/ 512', use '>> 9' to prevent a call
 			to divdu3 on x86 platforms
 		*/
-		rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
+		rate_cps = (unsigned long long) (1UL << exp) * (man + 512) >> 9;
 
 		if (rate_cps < 10)
 			rate_cps = 10;	/* 2.2.1 minimum payload rate is 10 cps */

drivers/base/regmap/regmap-irq.c

@@ -108,6 +108,9 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 	 * suppress pointless writes.
 	 */
 	for (i = 0; i < d->chip->num_regs; i++) {
+		if (!d->chip->mask_base)
+			continue;
+
 		reg = d->chip->mask_base +
 			(i * map->reg_stride * d->irq_reg_stride);
 		if (d->chip->mask_invert) {
@@ -258,7 +261,7 @@ static int regmap_irq_set_type(struct irq_data *data, unsigned int type)
 	const struct regmap_irq_type *t = &irq_data->type;
 
 	if ((t->types_supported & type) != type)
-		return -ENOTSUPP;
+		return 0;
 
 	reg = t->type_reg_offset / map->reg_stride;
 
@@ -588,6 +591,9 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	/* Mask all the interrupts by default */
 	for (i = 0; i < chip->num_regs; i++) {
 		d->mask_buf[i] = d->mask_buf_def[i];
+		if (!chip->mask_base)
+			continue;
+
 		reg = chip->mask_base +
 			(i * map->reg_stride * d->irq_reg_stride);
 		if (chip->mask_invert)

drivers/block/nbd.c

@@ -288,9 +288,10 @@ static void nbd_size_update(struct nbd_device *nbd)
 	blk_queue_physical_block_size(nbd->disk->queue, config->blksize);
 	set_capacity(nbd->disk, config->bytesize >> 9);
 	if (bdev) {
-		if (bdev->bd_disk)
+		if (bdev->bd_disk) {
 			bd_set_size(bdev, config->bytesize);
-		else
+			set_blocksize(bdev, config->blksize);
+		} else
 			bdev->bd_invalidated = 1;
 		bdput(bdev);
 	}

drivers/crypto/Kconfig

@@ -692,6 +692,7 @@ config CRYPTO_DEV_BCM_SPU
 	depends on ARCH_BCM_IPROC
 	depends on MAILBOX
 	default m
+	select CRYPTO_AUTHENC
 	select CRYPTO_DES
 	select CRYPTO_MD5
 	select CRYPTO_SHA1

drivers/crypto/bcm/cipher.c

@@ -2845,44 +2845,28 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 	struct spu_hw *spu = &iproc_priv.spu;
 	struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
 	struct crypto_tfm *tfm = crypto_aead_tfm(cipher);
-	struct rtattr *rta = (void *)key;
+	struct crypto_authenc_keys keys;
-	struct crypto_authenc_key_param *param;
+	int ret;
-	const u8 *origkey = key;
-	const unsigned int origkeylen = keylen;
-
-	int ret = 0;
 
 	flow_log("%s() aead:%p key:%p keylen:%u\n", __func__, cipher, key,
 		 keylen);
 	flow_dump("  key: ", key, keylen);
 
-	if (!RTA_OK(rta, keylen))
+	ret = crypto_authenc_extractkeys(&keys, key, keylen);
-		goto badkey;
+	if (ret)
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
 		goto badkey;
 
-	param = RTA_DATA(rta);
+	if (keys.enckeylen > MAX_KEY_SIZE ||
-	ctx->enckeylen = be32_to_cpu(param->enckeylen);
+	    keys.authkeylen > MAX_KEY_SIZE)
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < ctx->enckeylen)
-		goto badkey;
-	if (ctx->enckeylen > MAX_KEY_SIZE)
 		goto badkey;
 
-	ctx->authkeylen = keylen - ctx->enckeylen;
+	ctx->enckeylen = keys.enckeylen;
+	ctx->authkeylen = keys.authkeylen;
 
-	if (ctx->authkeylen > MAX_KEY_SIZE)
+	memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
-		goto badkey;
-
-	memcpy(ctx->enckey, key + ctx->authkeylen, ctx->enckeylen);
 	/* May end up padding auth key. So make sure it's zeroed. */
 	memset(ctx->authkey, 0, sizeof(ctx->authkey));
-	memcpy(ctx->authkey, key, ctx->authkeylen);
+	memcpy(ctx->authkey, keys.authkey, keys.authkeylen);
 
 	switch (ctx->alg->cipher_info.alg) {
 	case CIPHER_ALG_DES:
@@ -2890,7 +2874,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 			u32 tmp[DES_EXPKEY_WORDS];
 			u32 flags = CRYPTO_TFM_RES_WEAK_KEY;
 
-			if (des_ekey(tmp, key) == 0) {
+			if (des_ekey(tmp, keys.enckey) == 0) {
 				if (crypto_aead_get_flags(cipher) &
 				    CRYPTO_TFM_REQ_WEAK_KEY) {
 					crypto_aead_set_flags(cipher, flags);
@@ -2905,7 +2889,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 		break;
 	case CIPHER_ALG_3DES:
 		if (ctx->enckeylen == (DES_KEY_SIZE * 3)) {
-			const u32 *K = (const u32 *)key;
+			const u32 *K = (const u32 *)keys.enckey;
 			u32 flags = CRYPTO_TFM_RES_BAD_KEY_SCHED;
 
 			if (!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
@@ -2956,9 +2940,7 @@ static int aead_authenc_setkey(struct crypto_aead *cipher,
 		ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
 		ctx->fallback_cipher->base.crt_flags |=
 		    tfm->crt_flags & CRYPTO_TFM_REQ_MASK;
-		ret =
+		ret = crypto_aead_setkey(ctx->fallback_cipher, key, keylen);
-		    crypto_aead_setkey(ctx->fallback_cipher, origkey,
-				       origkeylen);
 		if (ret) {
 			flow_log("  fallback setkey() returned:%d\n", ret);
 			tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;

drivers/crypto/caam/caamalg.c

@@ -3476,7 +3476,7 @@ static int __init caam_algapi_init(void)
 		 * Skip algorithms requiring message digests
 		 * if MD or MD size is not supported by device.
 		 */
-		if ((c2_alg_sel & ~OP_ALG_ALGSEL_SUBMASK) == 0x40 &&
+		if (is_mdha(c2_alg_sel) &&
 		    (!md_inst || t_alg->aead.maxauthsize > md_limit))
 			continue;
 

drivers/crypto/caam/caamhash.c

@@ -1072,13 +1072,16 @@ static int ahash_final_no_ctx(struct ahash_request *req)
 
 	desc = edesc->hw_desc;
 
-	state->buf_dma = dma_map_single(jrdev, buf, buflen, DMA_TO_DEVICE);
+	if (buflen) {
-	if (dma_mapping_error(jrdev, state->buf_dma)) {
+		state->buf_dma = dma_map_single(jrdev, buf, buflen,
-		dev_err(jrdev, "unable to map src\n");
+						DMA_TO_DEVICE);
-		goto unmap;
+		if (dma_mapping_error(jrdev, state->buf_dma)) {
-	}
+			dev_err(jrdev, "unable to map src\n");
+			goto unmap;
+		}
 
-	append_seq_in_ptr(desc, state->buf_dma, buflen, 0);
+		append_seq_in_ptr(desc, state->buf_dma, buflen, 0);
+	}
 
 	edesc->dst_dma = map_seq_out_ptr_result(desc, jrdev, req->result,
 						digestsize);

drivers/crypto/caam/desc.h

@@ -1155,6 +1155,7 @@
 #define OP_ALG_ALGSEL_DES	(0x20 << OP_ALG_ALGSEL_SHIFT)
 #define OP_ALG_ALGSEL_3DES	(0x21 << OP_ALG_ALGSEL_SHIFT)
 #define OP_ALG_ALGSEL_ARC4	(0x30 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_CHA_MDHA		(0x40 << OP_ALG_ALGSEL_SHIFT)
 #define OP_ALG_ALGSEL_MD5	(0x40 << OP_ALG_ALGSEL_SHIFT)
 #define OP_ALG_ALGSEL_SHA1	(0x41 << OP_ALG_ALGSEL_SHIFT)
 #define OP_ALG_ALGSEL_SHA224	(0x42 << OP_ALG_ALGSEL_SHIFT)

drivers/crypto/caam/error.h

@@ -7,6 +7,9 @@
 
 #ifndef CAAM_ERROR_H
 #define CAAM_ERROR_H
+
+#include "desc.h"
+
 #define CAAM_ERROR_STR_MAX 302
 
 void caam_strstatus(struct device *dev, u32 status, bool qi_v2);
@@ -17,4 +20,10 @@ void caam_strstatus(struct device *dev, u32 status, bool qi_v2);
 void caam_dump_sg(const char *level, const char *prefix_str, int prefix_type,
 		  int rowsize, int groupsize, struct scatterlist *sg,
 		  size_t tlen, bool ascii);
+
+static inline bool is_mdha(u32 algtype)
+{
+	return (algtype & OP_ALG_ALGSEL_MASK & ~OP_ALG_ALGSEL_SUBMASK) ==
+	       OP_ALG_CHA_MDHA;
+}
 #endif /* CAAM_ERROR_H */

drivers/crypto/cavium/nitrox/nitrox_reqmgr.c

@@ -567,10 +567,10 @@ static void process_response_list(struct nitrox_cmdq *cmdq)
 
 		/* ORH error code */
 		err = READ_ONCE(*sr->resp.orh) & 0xff;
-		softreq_destroy(sr);
 
 		if (sr->callback)
 			sr->callback(sr->cb_arg, err);
+		softreq_destroy(sr);
 
 		req_completed++;
 	}

drivers/crypto/ccree/cc_aead.c

@@ -549,13 +549,12 @@ static int cc_aead_setkey(struct crypto_aead *tfm, const u8 *key,
 			  unsigned int keylen)
 {
 	struct cc_aead_ctx *ctx = crypto_aead_ctx(tfm);
-	struct rtattr *rta = (struct rtattr *)key;
 	struct cc_crypto_req cc_req = {};
-	struct crypto_authenc_key_param *param;
 	struct cc_hw_desc desc[MAX_AEAD_SETKEY_SEQ];
-	int rc = -EINVAL;
 	unsigned int seq_len = 0;
 	struct device *dev = drvdata_to_dev(ctx->drvdata);
+	const u8 *enckey, *authkey;
+	int rc;
 
 	dev_dbg(dev, "Setting key in context @%p for %s. key=%p keylen=%u\n",
 		ctx, crypto_tfm_alg_name(crypto_aead_tfm(tfm)), key, keylen);
@@ -563,35 +562,33 @@ static int cc_aead_setkey(struct crypto_aead *tfm, const u8 *key,
 	/* STAT_PHASE_0: Init and sanity checks */
 
 	if (ctx->auth_mode != DRV_HASH_NULL) { /* authenc() alg. */
-		if (!RTA_OK(rta, keylen))
+		struct crypto_authenc_keys keys;
+
+		rc = crypto_authenc_extractkeys(&keys, key, keylen);
+		if (rc)
 			goto badkey;
-		if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+		enckey = keys.enckey;
-			goto badkey;
+		authkey = keys.authkey;
-		if (RTA_PAYLOAD(rta) < sizeof(*param))
+		ctx->enc_keylen = keys.enckeylen;
-			goto badkey;
+		ctx->auth_keylen = keys.authkeylen;
-		param = RTA_DATA(rta);
-		ctx->enc_keylen = be32_to_cpu(param->enckeylen);
-		key += RTA_ALIGN(rta->rta_len);
-		keylen -= RTA_ALIGN(rta->rta_len);
-		if (keylen < ctx->enc_keylen)
-			goto badkey;
-		ctx->auth_keylen = keylen - ctx->enc_keylen;
 
 		if (ctx->cipher_mode == DRV_CIPHER_CTR) {
 			/* the nonce is stored in bytes at end of key */
+			rc = -EINVAL;
 			if (ctx->enc_keylen <
 			    (AES_MIN_KEY_SIZE + CTR_RFC3686_NONCE_SIZE))
 				goto badkey;
 			/* Copy nonce from last 4 bytes in CTR key to
 			 *  first 4 bytes in CTR IV
 			 */
-			memcpy(ctx->ctr_nonce, key + ctx->auth_keylen +
+			memcpy(ctx->ctr_nonce, enckey + ctx->enc_keylen -
-			       ctx->enc_keylen - CTR_RFC3686_NONCE_SIZE,
+			       CTR_RFC3686_NONCE_SIZE, CTR_RFC3686_NONCE_SIZE);
-			       CTR_RFC3686_NONCE_SIZE);
 			/* Set CTR key size */
 			ctx->enc_keylen -= CTR_RFC3686_NONCE_SIZE;
 		}
 	} else { /* non-authenc - has just one key */
+		enckey = key;
+		authkey = NULL;
 		ctx->enc_keylen = keylen;
 		ctx->auth_keylen = 0;
 	}
@@ -603,13 +600,14 @@ static int cc_aead_setkey(struct crypto_aead *tfm, const u8 *key,
 	/* STAT_PHASE_1: Copy key to ctx */
 
 	/* Get key material */
-	memcpy(ctx->enckey, key + ctx->auth_keylen, ctx->enc_keylen);
+	memcpy(ctx->enckey, enckey, ctx->enc_keylen);
 	if (ctx->enc_keylen == 24)
 		memset(ctx->enckey + 24, 0, CC_AES_KEY_SIZE_MAX - 24);
 	if (ctx->auth_mode == DRV_HASH_XCBC_MAC) {
-		memcpy(ctx->auth_state.xcbc.xcbc_keys, key, ctx->auth_keylen);
+		memcpy(ctx->auth_state.xcbc.xcbc_keys, authkey,
+		       ctx->auth_keylen);
 	} else if (ctx->auth_mode != DRV_HASH_NULL) { /* HMAC */
-		rc = cc_get_plain_hmac_key(tfm, key, ctx->auth_keylen);
+		rc = cc_get_plain_hmac_key(tfm, authkey, ctx->auth_keylen);
 		if (rc)
 			goto badkey;
 	}

drivers/crypto/talitos.c

@@ -1361,23 +1361,18 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	bool is_sec1 = has_ftr_sec1(priv);
 	int max_len = is_sec1 ? TALITOS1_MAX_DATA_LEN : TALITOS2_MAX_DATA_LEN;
-	void *err;
 
 	if (cryptlen + authsize > max_len) {
 		dev_err(dev, "length exceeds h/w max limit\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (ivsize)
-		iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE);
-
 	if (!dst || dst == src) {
 		src_len = assoclen + cryptlen + authsize;
 		src_nents = sg_nents_for_len(src, src_len);
 		if (src_nents < 0) {
 			dev_err(dev, "Invalid number of src SG.\n");
-			err = ERR_PTR(-EINVAL);
+			return ERR_PTR(-EINVAL);
-			goto error_sg;
 		}
 		src_nents = (src_nents == 1) ? 0 : src_nents;
 		dst_nents = dst ? src_nents : 0;
@@ -1387,16 +1382,14 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 		src_nents = sg_nents_for_len(src, src_len);
 		if (src_nents < 0) {
 			dev_err(dev, "Invalid number of src SG.\n");
-			err = ERR_PTR(-EINVAL);
+			return ERR_PTR(-EINVAL);
-			goto error_sg;
 		}
 		src_nents = (src_nents == 1) ? 0 : src_nents;
 		dst_len = assoclen + cryptlen + (encrypt ? authsize : 0);
 		dst_nents = sg_nents_for_len(dst, dst_len);
 		if (dst_nents < 0) {
 			dev_err(dev, "Invalid number of dst SG.\n");
-			err = ERR_PTR(-EINVAL);
+			return ERR_PTR(-EINVAL);
-			goto error_sg;
 		}
 		dst_nents = (dst_nents == 1) ? 0 : dst_nents;
 	}
@@ -1423,11 +1416,14 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 	/* if its a ahash, add space for a second desc next to the first one */
 	if (is_sec1 && !dst)
 		alloc_len += sizeof(struct talitos_desc);
+	alloc_len += ivsize;
 
 	edesc = kmalloc(alloc_len, GFP_DMA | flags);
-	if (!edesc) {
+	if (!edesc)
-		err = ERR_PTR(-ENOMEM);
+		return ERR_PTR(-ENOMEM);
-		goto error_sg;
+	if (ivsize) {
+		iv = memcpy(((u8 *)edesc) + alloc_len - ivsize, iv, ivsize);
+		iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE);
 	}
 	memset(&edesc->desc, 0, sizeof(edesc->desc));
 
@@ -1445,10 +1441,6 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 						     DMA_BIDIRECTIONAL);
 	}
 	return edesc;
-error_sg:
-	if (iv_dma)
-		dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE);
-	return err;
 }
 
 static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv,

drivers/gpu/drm/amd/amdgpu/amdgpu_display.c

@@ -531,17 +531,6 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
 	struct drm_gem_object *obj;
 	struct amdgpu_framebuffer *amdgpu_fb;
 	int ret;
-	int height;
-	struct amdgpu_device *adev = dev->dev_private;
-	int cpp = drm_format_plane_cpp(mode_cmd->pixel_format, 0);
-	int pitch = mode_cmd->pitches[0] / cpp;
-
-	pitch = amdgpu_align_pitch(adev, pitch, cpp, false);
-	if (mode_cmd->pitches[0] != pitch) {
-		DRM_DEBUG_KMS("Invalid pitch: expecting %d but got %d\n",
-			      pitch, mode_cmd->pitches[0]);
-		return ERR_PTR(-EINVAL);
-	}
 
 	obj = drm_gem_object_lookup(file_priv, mode_cmd->handles[0]);
 	if (obj ==  NULL) {
@@ -556,13 +545,6 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev,
 		return ERR_PTR(-EINVAL);
 	}
 
-	height = ALIGN(mode_cmd->height, 8);
-	if (obj->size < pitch * height) {
-		DRM_DEBUG_KMS("Invalid GEM size: expecting >= %d but got %zu\n",
-			      pitch * height, obj->size);
-		return ERR_PTR(-EINVAL);
-	}
-
 	amdgpu_fb = kzalloc(sizeof(*amdgpu_fb), GFP_KERNEL);
 	if (amdgpu_fb == NULL) {
 		drm_gem_object_put_unlocked(obj);

drivers/gpu/drm/amd/amdkfd/Kconfig

@@ -4,8 +4,8 @@
 
 config HSA_AMD
 	bool "HSA kernel driver for AMD GPU devices"
-	depends on DRM_AMDGPU && X86_64
+	depends on DRM_AMDGPU && (X86_64 || ARM64)
-	imply AMD_IOMMU_V2
+	imply AMD_IOMMU_V2 if X86_64
 	select MMU_NOTIFIER
 	help
 	  Enable this if you want to use HSA features on AMD GPU devices.

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

@@ -863,6 +863,7 @@ static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
 	return 0;
 }
 
+#if CONFIG_X86_64
 static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
 				uint32_t *num_entries,
 				struct crat_subtype_iolink *sub_type_hdr)
@@ -905,6 +906,7 @@ static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
 
 	return 0;
 }
+#endif
 
 /* kfd_create_vcrat_image_cpu - Create Virtual CRAT for CPU
  *
@@ -920,7 +922,9 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
 	struct crat_subtype_generic *sub_type_hdr;
 	int avail_size = *size;
 	int numa_node_id;
+#ifdef CONFIG_X86_64
 	uint32_t entries = 0;
+#endif
 	int ret = 0;
 
 	if (!pcrat_image || avail_size < VCRAT_SIZE_FOR_CPU)
@@ -982,6 +986,7 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
 			sub_type_hdr->length);
 
 		/* Fill in Subtype: IO Link */
+#ifdef CONFIG_X86_64
 		ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size,
 				&entries,
 				(struct crat_subtype_iolink *)sub_type_hdr);
@@ -992,6 +997,9 @@ static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
 
 		sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
 				sub_type_hdr->length * entries);
+#else
+		pr_info("IO link not available for non x86 platforms\n");
+#endif
 
 		crat_table->num_domains++;
 	}

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

@@ -1093,8 +1093,6 @@ static uint32_t kfd_generate_gpu_id(struct kfd_dev *gpu)
  *		the GPU device is not already present in the topology device
  *		list then return NULL. This means a new topology device has to
  *		be created for this GPU.
- * TODO: Rather than assiging @gpu to first topology device withtout
- *		gpu attached, it will better to have more stringent check.
  */
 static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)
 {
@@ -1102,12 +1100,20 @@ static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)
 	struct kfd_topology_device *out_dev = NULL;
 
 	down_write(&topology_lock);
-	list_for_each_entry(dev, &topology_device_list, list)
+	list_for_each_entry(dev, &topology_device_list, list) {
+		/* Discrete GPUs need their own topology device list
+		 * entries. Don't assign them to CPU/APU nodes.
+		 */
+		if (!gpu->device_info->needs_iommu_device &&
+		    dev->node_props.cpu_cores_count)
+			continue;
+
 		if (!dev->gpu && (dev->node_props.simd_count > 0)) {
 			dev->gpu = gpu;
 			out_dev = dev;
 			break;
 		}
+	}
 	up_write(&topology_lock);
 	return out_dev;
 }
@@ -1392,7 +1398,6 @@ int kfd_topology_enum_kfd_devices(uint8_t idx, struct kfd_dev **kdev)
 
 static int kfd_cpumask_to_apic_id(const struct cpumask *cpumask)
 {
-	const struct cpuinfo_x86 *cpuinfo;
 	int first_cpu_of_numa_node;
 
 	if (!cpumask || cpumask == cpu_none_mask)
@@ -1400,9 +1405,11 @@ static int kfd_cpumask_to_apic_id(const struct cpumask *cpumask)
 	first_cpu_of_numa_node = cpumask_first(cpumask);
 	if (first_cpu_of_numa_node >= nr_cpu_ids)
 		return -1;
-	cpuinfo = &cpu_data(first_cpu_of_numa_node);
+#ifdef CONFIG_X86_64
-
+	return cpu_data(first_cpu_of_numa_node).apicid;
-	return cpuinfo->apicid;
+#else
+	return first_cpu_of_numa_node;
+#endif
 }
 
 /* kfd_numa_node_to_apic_id - Returns the APIC ID of the first logical processor

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -1772,7 +1772,7 @@ static int amdgpu_dm_backlight_update_status(struct backlight_device *bd)
 		+ caps.min_input_signal * 0x101;
 
 	if (dc_link_set_backlight_level(dm->backlight_link,
-			brightness, 0, 0))
+			brightness, 0))
 		return 0;
 	else
 		return 1;
@@ -5933,7 +5933,7 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
 		if (!drm_atomic_crtc_needs_modeset(new_crtc_state) &&
 		    !new_crtc_state->color_mgmt_changed &&
-		    !new_crtc_state->vrr_enabled)
+		    old_crtc_state->vrr_enabled == new_crtc_state->vrr_enabled)
 			continue;
 
 		if (!new_crtc_state->enable)

drivers/gpu/drm/amd/display/dc/core/dc_link.c

@@ -2190,8 +2190,7 @@ int dc_link_get_backlight_level(const struct dc_link *link)
 
 bool dc_link_set_backlight_level(const struct dc_link *link,
 		uint32_t backlight_pwm_u16_16,
-		uint32_t frame_ramp,
+		uint32_t frame_ramp)
-		const struct dc_stream_state *stream)
 {
 	struct dc  *core_dc = link->ctx->dc;
 	struct abm *abm = core_dc->res_pool->abm;
@@ -2206,10 +2205,6 @@ bool dc_link_set_backlight_level(const struct dc_link *link,
 		(abm->funcs->set_backlight_level_pwm == NULL))
 		return false;
 
-	if (stream)
-		((struct dc_stream_state *)stream)->bl_pwm_level =
-				backlight_pwm_u16_16;
-
 	use_smooth_brightness = dmcu->funcs->is_dmcu_initialized(dmcu);
 
 	DC_LOG_BACKLIGHT("New Backlight level: %d (0x%X)\n",
@@ -2637,11 +2632,6 @@ void core_link_enable_stream(
 
 		if (dc_is_dp_signal(pipe_ctx->stream->signal))
 			enable_stream_features(pipe_ctx);
-
-		dc_link_set_backlight_level(pipe_ctx->stream->sink->link,
-				pipe_ctx->stream->bl_pwm_level,
-				0,
-				pipe_ctx->stream);
 	}
 
 }

drivers/gpu/drm/amd/display/dc/dc_link.h

@@ -146,8 +146,7 @@ static inline struct dc_link *dc_get_link_at_index(struct dc *dc, uint32_t link_
  */
 bool dc_link_set_backlight_level(const struct dc_link *dc_link,
 		uint32_t backlight_pwm_u16_16,
-		uint32_t frame_ramp,
+		uint32_t frame_ramp);
-		const struct dc_stream_state *stream);
 
 int dc_link_get_backlight_level(const struct dc_link *dc_link);
 

drivers/gpu/drm/amd/display/dc/dc_stream.h

@@ -91,7 +91,6 @@ struct dc_stream_state {
 
 	/* DMCU info */
 	unsigned int abm_level;
-	unsigned int bl_pwm_level;
 
 	/* from core_stream struct */
 	struct dc_context *ctx;

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -1000,7 +1000,7 @@ void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx)
 
 		pipe_ctx->stream_res.audio->funcs->az_enable(pipe_ctx->stream_res.audio);
 
-		if (num_audio == 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
+		if (num_audio >= 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
 			/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
 			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
 		/* un-mute audio */
@@ -1017,6 +1017,8 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
 	pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control(
 			pipe_ctx->stream_res.stream_enc, true);
 	if (pipe_ctx->stream_res.audio) {
+		struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu;
+
 		if (option != KEEP_ACQUIRED_RESOURCE ||
 				!dc->debug.az_endpoint_mute_only) {
 			/*only disalbe az_endpoint if power down or free*/
@@ -1036,6 +1038,9 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
 			update_audio_usage(&dc->current_state->res_ctx, dc->res_pool, pipe_ctx->stream_res.audio, false);
 			pipe_ctx->stream_res.audio = NULL;
 		}
+		if (pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
+			/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
+			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
 
 		/* TODO: notify audio driver for if audio modes list changed
 		 * add audio mode list change flag */

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c

@@ -463,7 +463,7 @@ void dpp1_set_cursor_position(
 	if (src_y_offset >= (int)param->viewport.height)
 		cur_en = 0;  /* not visible beyond bottom edge*/
 
-	if (src_y_offset < 0)
+	if (src_y_offset + (int)height <= 0)
 		cur_en = 0;  /* not visible beyond top edge*/
 
 	REG_UPDATE(CURSOR0_CONTROL,

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c

@@ -1140,7 +1140,7 @@ void hubp1_cursor_set_position(
 	if (src_y_offset >= (int)param->viewport.height)
 		cur_en = 0;  /* not visible beyond bottom edge*/
 
-	if (src_y_offset < 0) //+ (int)hubp->curs_attr.height
+	if (src_y_offset + (int)hubp->curs_attr.height <= 0)
 		cur_en = 0;  /* not visible beyond top edge*/
 
 	if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0)

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -2355,30 +2355,23 @@ static void dcn10_apply_ctx_for_surface(
 			top_pipe_to_program->plane_state->update_flags.bits.full_update)
 		for (i = 0; i < dc->res_pool->pipe_count; i++) {
 			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
-
+			tg = pipe_ctx->stream_res.tg;
 			/* Skip inactive pipes and ones already updated */
 			if (!pipe_ctx->stream || pipe_ctx->stream == stream
-					|| !pipe_ctx->plane_state)
+					|| !pipe_ctx->plane_state
+					|| !tg->funcs->is_tg_enabled(tg))
 				continue;
 
-			pipe_ctx->stream_res.tg->funcs->lock(pipe_ctx->stream_res.tg);
+			tg->funcs->lock(tg);
 
 			pipe_ctx->plane_res.hubp->funcs->hubp_setup_interdependent(
 				pipe_ctx->plane_res.hubp,
 				&pipe_ctx->dlg_regs,
 				&pipe_ctx->ttu_regs);
+
+			tg->funcs->unlock(tg);
 		}
 
-	for (i = 0; i < dc->res_pool->pipe_count; i++) {
-		struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
-
-		if (!pipe_ctx->stream || pipe_ctx->stream == stream
-				|| !pipe_ctx->plane_state)
-			continue;
-
-		dcn10_pipe_control_lock(dc, pipe_ctx, false);
-	}
-
 	if (num_planes == 0)
 		false_optc_underflow_wa(dc, stream, tg);
 

drivers/gpu/drm/amd/display/modules/power/power_helpers.c

@@ -57,6 +57,7 @@ static const unsigned char abm_config[abm_defines_max_config][abm_defines_max_le
 #define NUM_POWER_FN_SEGS 8
 #define NUM_BL_CURVE_SEGS 16
 
+#pragma pack(push, 1)
 /* NOTE: iRAM is 256B in size */
 struct iram_table_v_2 {
 	/* flags                      */
@@ -100,6 +101,7 @@ struct iram_table_v_2 {
 	uint8_t dummy8;							/* 0xfe       */
 	uint8_t dummy9;							/* 0xff       */
 };
+#pragma pack(pop)
 
 static uint16_t backlight_8_to_16(unsigned int backlight_8bit)
 {

drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c

@@ -753,6 +753,22 @@ static int vega12_init_smc_table(struct pp_hwmgr *hwmgr)
 	return 0;
 }
 
+static int vega12_run_acg_btc(struct pp_hwmgr *hwmgr)
+{
+	uint32_t result;
+
+	PP_ASSERT_WITH_CODE(
+		smum_send_msg_to_smc(hwmgr, PPSMC_MSG_RunAcgBtc) == 0,
+		"[Run_ACG_BTC] Attempt to run ACG BTC failed!",
+		return -EINVAL);
+
+	result = smum_get_argument(hwmgr);
+	PP_ASSERT_WITH_CODE(result == 1,
+			"Failed to run ACG BTC!", return -EINVAL);
+
+	return 0;
+}
+
 static int vega12_set_allowed_featuresmask(struct pp_hwmgr *hwmgr)
 {
 	struct vega12_hwmgr *data =
@@ -931,6 +947,11 @@ static int vega12_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
 			"Failed to initialize SMC table!",
 			result = tmp_result);
 
+	tmp_result = vega12_run_acg_btc(hwmgr);
+	PP_ASSERT_WITH_CODE(!tmp_result,
+			"Failed to run ACG BTC!",
+			result = tmp_result);
+
 	result = vega12_enable_all_smu_features(hwmgr);
 	PP_ASSERT_WITH_CODE(!result,
 			"Failed to enable all smu features!",

drivers/gpu/drm/i915/gvt/handlers.c

@@ -2799,6 +2799,7 @@ static int init_broadwell_mmio_info(struct intel_gvt *gvt)
 	MMIO_DFH(_MMIO(0xe2a0), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
 	MMIO_DFH(_MMIO(0xe2b0), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
 	MMIO_DFH(_MMIO(0xe2c0), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
+	MMIO_DFH(_MMIO(0x21f0), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL);
 	return 0;
 }
 

drivers/gpu/drm/i915/gvt/hypercall.h

@@ -41,7 +41,7 @@ struct intel_gvt_mpt {
 	int (*host_init)(struct device *dev, void *gvt, const void *ops);
 	void (*host_exit)(struct device *dev, void *gvt);
 	int (*attach_vgpu)(void *vgpu, unsigned long *handle);
-	void (*detach_vgpu)(unsigned long handle);
+	void (*detach_vgpu)(void *vgpu);
 	int (*inject_msi)(unsigned long handle, u32 addr, u16 data);
 	unsigned long (*from_virt_to_mfn)(void *p);
 	int (*enable_page_track)(unsigned long handle, u64 gfn);

drivers/gpu/drm/i915/gvt/kvmgt.c

@@ -996,7 +996,7 @@ static int intel_vgpu_mmap(struct mdev_device *mdev, struct vm_area_struct *vma)
 {
 	unsigned int index;
 	u64 virtaddr;
-	unsigned long req_size, pgoff = 0;
+	unsigned long req_size, pgoff, req_start;
 	pgprot_t pg_prot;
 	struct intel_vgpu *vgpu = mdev_get_drvdata(mdev);
 
@@ -1014,7 +1014,17 @@ static int intel_vgpu_mmap(struct mdev_device *mdev, struct vm_area_struct *vma)
 	pg_prot = vma->vm_page_prot;
 	virtaddr = vma->vm_start;
 	req_size = vma->vm_end - vma->vm_start;
-	pgoff = vgpu_aperture_pa_base(vgpu) >> PAGE_SHIFT;
+	pgoff = vma->vm_pgoff &
+		((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
+	req_start = pgoff << PAGE_SHIFT;
+
+	if (!intel_vgpu_in_aperture(vgpu, req_start))
+		return -EINVAL;
+	if (req_start + req_size >
+	    vgpu_aperture_offset(vgpu) + vgpu_aperture_sz(vgpu))
+		return -EINVAL;
+
+	pgoff = (gvt_aperture_pa_base(vgpu->gvt) >> PAGE_SHIFT) + pgoff;
 
 	return remap_pfn_range(vma, virtaddr, pgoff, req_size, pg_prot);
 }
@@ -1662,9 +1672,21 @@ static int kvmgt_attach_vgpu(void *vgpu, unsigned long *handle)
 	return 0;
 }
 
-static void kvmgt_detach_vgpu(unsigned long handle)
+static void kvmgt_detach_vgpu(void *p_vgpu)
 {
-	/* nothing to do here */
+	int i;
+	struct intel_vgpu *vgpu = (struct intel_vgpu *)p_vgpu;
+
+	if (!vgpu->vdev.region)
+		return;
+
+	for (i = 0; i < vgpu->vdev.num_regions; i++)
+		if (vgpu->vdev.region[i].ops->release)
+			vgpu->vdev.region[i].ops->release(vgpu,
+					&vgpu->vdev.region[i]);
+	vgpu->vdev.num_regions = 0;
+	kfree(vgpu->vdev.region);
+	vgpu->vdev.region = NULL;
 }
 
 static int kvmgt_inject_msi(unsigned long handle, u32 addr, u16 data)

drivers/gpu/drm/i915/gvt/mpt.h

@@ -101,7 +101,7 @@ static inline void intel_gvt_hypervisor_detach_vgpu(struct intel_vgpu *vgpu)
 	if (!intel_gvt_host.mpt->detach_vgpu)
 		return;
 
-	intel_gvt_host.mpt->detach_vgpu(vgpu->handle);
+	intel_gvt_host.mpt->detach_vgpu(vgpu);
 }
 
 #define MSI_CAP_CONTROL(offset) (offset + 2)

drivers/gpu/drm/meson/meson_crtc.c

@@ -46,7 +46,6 @@ struct meson_crtc {
 	struct drm_crtc base;
 	struct drm_pending_vblank_event *event;
 	struct meson_drm *priv;
-	bool enabled;
 };
 #define to_meson_crtc(x) container_of(x, struct meson_crtc, base)
 
@@ -82,7 +81,8 @@ static const struct drm_crtc_funcs meson_crtc_funcs = {
 
 };
 
-static void meson_crtc_enable(struct drm_crtc *crtc)
+static void meson_crtc_atomic_enable(struct drm_crtc *crtc,
+				     struct drm_crtc_state *old_state)
 {
 	struct meson_crtc *meson_crtc = to_meson_crtc(crtc);
 	struct drm_crtc_state *crtc_state = crtc->state;
@@ -108,20 +108,6 @@ static void meson_crtc_enable(struct drm_crtc *crtc)
 
 	drm_crtc_vblank_on(crtc);
 
-	meson_crtc->enabled = true;
-}
-
-static void meson_crtc_atomic_enable(struct drm_crtc *crtc,
-				     struct drm_crtc_state *old_state)
-{
-	struct meson_crtc *meson_crtc = to_meson_crtc(crtc);
-	struct meson_drm *priv = meson_crtc->priv;
-
-	DRM_DEBUG_DRIVER("\n");
-
-	if (!meson_crtc->enabled)
-		meson_crtc_enable(crtc);
-
 	priv->viu.osd1_enabled = true;
 }
 
@@ -153,8 +139,6 @@ static void meson_crtc_atomic_disable(struct drm_crtc *crtc,
 
 		crtc->state->event = NULL;
 	}
-
-	meson_crtc->enabled = false;
 }
 
 static void meson_crtc_atomic_begin(struct drm_crtc *crtc,
@@ -163,9 +147,6 @@ static void meson_crtc_atomic_begin(struct drm_crtc *crtc,
 	struct meson_crtc *meson_crtc = to_meson_crtc(crtc);
 	unsigned long flags;
 
-	if (crtc->state->enable && !meson_crtc->enabled)
-		meson_crtc_enable(crtc);
-
 	if (crtc->state->event) {
 		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
 

drivers/gpu/drm/meson/meson_drv.c

@@ -75,6 +75,10 @@ static const struct drm_mode_config_funcs meson_mode_config_funcs = {
 	.fb_create           = drm_gem_fb_create,
 };
 
+static const struct drm_mode_config_helper_funcs meson_mode_config_helpers = {
+	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
 static irqreturn_t meson_irq(int irq, void *arg)
 {
 	struct drm_device *dev = arg;
@@ -266,6 +270,7 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
 	drm->mode_config.max_width = 3840;
 	drm->mode_config.max_height = 2160;
 	drm->mode_config.funcs = &meson_mode_config_funcs;
+	drm->mode_config.helper_private	= &meson_mode_config_helpers;
 
 	/* Hardware Initialization */
 
@@ -388,8 +393,10 @@ static int meson_probe_remote(struct platform_device *pdev,
 		remote_node = of_graph_get_remote_port_parent(ep);
 		if (!remote_node ||
 		    remote_node == parent || /* Ignore parent endpoint */
-		    !of_device_is_available(remote_node))
+		    !of_device_is_available(remote_node)) {
+			of_node_put(remote_node);
 			continue;
+		}
 
 		count += meson_probe_remote(pdev, match, remote, remote_node);
 
@@ -408,10 +415,13 @@ static int meson_drv_probe(struct platform_device *pdev)
 
 	for_each_endpoint_of_node(np, ep) {
 		remote = of_graph_get_remote_port_parent(ep);
-		if (!remote || !of_device_is_available(remote))
+		if (!remote || !of_device_is_available(remote)) {
+			of_node_put(remote);
 			continue;
+		}
 
 		count += meson_probe_remote(pdev, &match, np, remote);
+		of_node_put(remote);
 	}
 
 	if (count && !match)

drivers/gpu/drm/nouveau/nvkm/engine/device/base.c

@@ -2434,6 +2434,38 @@ nv140_chipset = {
 	.sec2 = gp102_sec2_new,
 };
 
+static const struct nvkm_device_chip
+nv162_chipset = {
+	.name = "TU102",
+	.bar = tu104_bar_new,
+	.bios = nvkm_bios_new,
+	.bus = gf100_bus_new,
+	.devinit = tu104_devinit_new,
+	.fault = tu104_fault_new,
+	.fb = gv100_fb_new,
+	.fuse = gm107_fuse_new,
+	.gpio = gk104_gpio_new,
+	.i2c = gm200_i2c_new,
+	.ibus = gm200_ibus_new,
+	.imem = nv50_instmem_new,
+	.ltc = gp102_ltc_new,
+	.mc = tu104_mc_new,
+	.mmu = tu104_mmu_new,
+	.pci = gp100_pci_new,
+	.pmu = gp102_pmu_new,
+	.therm = gp100_therm_new,
+	.timer = gk20a_timer_new,
+	.top = gk104_top_new,
+	.ce[0] = tu104_ce_new,
+	.ce[1] = tu104_ce_new,
+	.ce[2] = tu104_ce_new,
+	.ce[3] = tu104_ce_new,
+	.ce[4] = tu104_ce_new,
+	.disp = tu104_disp_new,
+	.dma = gv100_dma_new,
+	.fifo = tu104_fifo_new,
+};
+
 static const struct nvkm_device_chip
 nv164_chipset = {
 	.name = "TU104",
@@ -2950,6 +2982,7 @@ nvkm_device_ctor(const struct nvkm_device_func *func,
 		case 0x138: device->chip = &nv138_chipset; break;
 		case 0x13b: device->chip = &nv13b_chipset; break;
 		case 0x140: device->chip = &nv140_chipset; break;
+		case 0x162: device->chip = &nv162_chipset; break;
 		case 0x164: device->chip = &nv164_chipset; break;
 		case 0x166: device->chip = &nv166_chipset; break;
 		default:

drivers/gpu/drm/qxl/qxl_drv.c

@@ -250,14 +250,10 @@ static struct drm_driver qxl_driver = {
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = qxl_debugfs_init,
 #endif
-	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
-	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
 	.gem_prime_export = drm_gem_prime_export,
 	.gem_prime_import = drm_gem_prime_import,
 	.gem_prime_pin = qxl_gem_prime_pin,
 	.gem_prime_unpin = qxl_gem_prime_unpin,
-	.gem_prime_get_sg_table = qxl_gem_prime_get_sg_table,
-	.gem_prime_import_sg_table = qxl_gem_prime_import_sg_table,
 	.gem_prime_vmap = qxl_gem_prime_vmap,
 	.gem_prime_vunmap = qxl_gem_prime_vunmap,
 	.gem_prime_mmap = qxl_gem_prime_mmap,

drivers/gpu/drm/qxl/qxl_prime.c

@@ -38,20 +38,6 @@ void qxl_gem_prime_unpin(struct drm_gem_object *obj)
 	WARN_ONCE(1, "not implemented");
 }
 
-struct sg_table *qxl_gem_prime_get_sg_table(struct drm_gem_object *obj)
-{
-	WARN_ONCE(1, "not implemented");
-	return ERR_PTR(-ENOSYS);
-}
-
-struct drm_gem_object *qxl_gem_prime_import_sg_table(
-	struct drm_device *dev, struct dma_buf_attachment *attach,
-	struct sg_table *table)
-{
-	WARN_ONCE(1, "not implemented");
-	return ERR_PTR(-ENOSYS);
-}
-
 void *qxl_gem_prime_vmap(struct drm_gem_object *obj)
 {
 	WARN_ONCE(1, "not implemented");

drivers/gpu/drm/rockchip/rockchip_rgb.c

@@ -113,8 +113,10 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
 		child_count++;
 		ret = drm_of_find_panel_or_bridge(dev->of_node, 0, endpoint_id,
 						  &panel, &bridge);
-		if (!ret)
+		if (!ret) {
+			of_node_put(endpoint);
 			break;
+		}
 	}
 
 	of_node_put(port);

drivers/gpu/drm/sun4i/sun4i_backend.c

@@ -786,17 +786,18 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
 		remote = of_graph_get_remote_port_parent(ep);
 		if (!remote)
 			continue;
+		of_node_put(remote);
 
 		/* does this node match any registered engines? */
 		list_for_each_entry(frontend, &drv->frontend_list, list) {
 			if (remote == frontend->node) {
-				of_node_put(remote);
 				of_node_put(port);
+				of_node_put(ep);
 				return frontend;
 			}
 		}
 	}
-
+	of_node_put(port);
 	return ERR_PTR(-EINVAL);
 }
 

drivers/gpu/drm/virtio/virtgpu_drv.c

@@ -127,14 +127,10 @@ static struct drm_driver driver = {
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = virtio_gpu_debugfs_init,
 #endif
-	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
-	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
 	.gem_prime_export = drm_gem_prime_export,
 	.gem_prime_import = drm_gem_prime_import,
 	.gem_prime_pin = virtgpu_gem_prime_pin,
 	.gem_prime_unpin = virtgpu_gem_prime_unpin,
-	.gem_prime_get_sg_table = virtgpu_gem_prime_get_sg_table,
-	.gem_prime_import_sg_table = virtgpu_gem_prime_import_sg_table,
 	.gem_prime_vmap = virtgpu_gem_prime_vmap,
 	.gem_prime_vunmap = virtgpu_gem_prime_vunmap,
 	.gem_prime_mmap = virtgpu_gem_prime_mmap,

drivers/gpu/drm/virtio/virtgpu_drv.h

@@ -372,10 +372,6 @@ int virtio_gpu_object_wait(struct virtio_gpu_object *bo, bool no_wait);
 /* virtgpu_prime.c */
 int virtgpu_gem_prime_pin(struct drm_gem_object *obj);
 void virtgpu_gem_prime_unpin(struct drm_gem_object *obj);
-struct sg_table *virtgpu_gem_prime_get_sg_table(struct drm_gem_object *obj);
-struct drm_gem_object *virtgpu_gem_prime_import_sg_table(
-	struct drm_device *dev, struct dma_buf_attachment *attach,
-	struct sg_table *sgt);
 void *virtgpu_gem_prime_vmap(struct drm_gem_object *obj);
 void virtgpu_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr);
 int virtgpu_gem_prime_mmap(struct drm_gem_object *obj,