forked from Minki/linux
mmc: davinci: add support for SDIO irq handling
This patch adds support for handling SDIO interrupt on DaVinci MMC/SD controller. The patch has been tested on DM355 and DA850 EVMs with Marvell Libertas based SDIO wireless LAN card. Signed-off-by: Alagu Sankar <alagusankar@embwise.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
parent
e9b86841b3
commit
f9db92cb80
@ -66,8 +66,8 @@
|
||||
#define DAVINCI_MMCBLNC 0x60
|
||||
#define DAVINCI_SDIOCTL 0x64
|
||||
#define DAVINCI_SDIOST0 0x68
|
||||
#define DAVINCI_SDIOEN 0x6C
|
||||
#define DAVINCI_SDIOST 0x70
|
||||
#define DAVINCI_SDIOIEN 0x6C
|
||||
#define DAVINCI_SDIOIST 0x70
|
||||
#define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */
|
||||
|
||||
/* DAVINCI_MMCCTL definitions */
|
||||
@ -131,6 +131,14 @@
|
||||
#define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */
|
||||
#define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */
|
||||
|
||||
/* DAVINCI_SDIOST0 definitions */
|
||||
#define SDIOST0_DAT1_HI BIT(0)
|
||||
|
||||
/* DAVINCI_SDIOIEN definitions */
|
||||
#define SDIOIEN_IOINTEN BIT(0)
|
||||
|
||||
/* DAVINCI_SDIOIST definitions */
|
||||
#define SDIOIST_IOINT BIT(0)
|
||||
|
||||
/* MMCSD Init clock in Hz in opendrain mode */
|
||||
#define MMCSD_INIT_CLOCK 200000
|
||||
@ -164,7 +172,7 @@ struct mmc_davinci_host {
|
||||
unsigned int mmc_input_clk;
|
||||
void __iomem *base;
|
||||
struct resource *mem_res;
|
||||
int irq;
|
||||
int mmc_irq, sdio_irq;
|
||||
unsigned char bus_mode;
|
||||
|
||||
#define DAVINCI_MMC_DATADIR_NONE 0
|
||||
@ -184,6 +192,7 @@ struct mmc_davinci_host {
|
||||
u32 rxdma, txdma;
|
||||
bool use_dma;
|
||||
bool do_dma;
|
||||
bool sdio_int;
|
||||
|
||||
/* Scatterlist DMA uses one or more parameter RAM entries:
|
||||
* the main one (associated with rxdma or txdma) plus zero or
|
||||
@ -866,6 +875,19 @@ mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data)
|
||||
{
|
||||
host->data = NULL;
|
||||
|
||||
if (host->mmc->caps & MMC_CAP_SDIO_IRQ) {
|
||||
/*
|
||||
* SDIO Interrupt Detection work-around as suggested by
|
||||
* Davinci Errata (TMS320DM355 Silicon Revision 1.1 Errata
|
||||
* 2.1.6): Signal SDIO interrupt only if it is enabled by core
|
||||
*/
|
||||
if (host->sdio_int && !(readl(host->base + DAVINCI_SDIOST0) &
|
||||
SDIOST0_DAT1_HI)) {
|
||||
writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST);
|
||||
mmc_signal_sdio_irq(host->mmc);
|
||||
}
|
||||
}
|
||||
|
||||
if (host->do_dma) {
|
||||
davinci_abort_dma(host);
|
||||
|
||||
@ -932,6 +954,21 @@ davinci_abort_data(struct mmc_davinci_host *host, struct mmc_data *data)
|
||||
mmc_davinci_reset_ctrl(host, 0);
|
||||
}
|
||||
|
||||
static irqreturn_t mmc_davinci_sdio_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct mmc_davinci_host *host = dev_id;
|
||||
unsigned int status;
|
||||
|
||||
status = readl(host->base + DAVINCI_SDIOIST);
|
||||
if (status & SDIOIST_IOINT) {
|
||||
dev_dbg(mmc_dev(host->mmc),
|
||||
"SDIO interrupt status %x\n", status);
|
||||
writel(status | SDIOIST_IOINT, host->base + DAVINCI_SDIOIST);
|
||||
mmc_signal_sdio_irq(host->mmc);
|
||||
}
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t mmc_davinci_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct mmc_davinci_host *host = (struct mmc_davinci_host *)dev_id;
|
||||
@ -1076,11 +1113,32 @@ static int mmc_davinci_get_ro(struct mmc_host *mmc)
|
||||
return config->get_ro(pdev->id);
|
||||
}
|
||||
|
||||
static void mmc_davinci_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
||||
{
|
||||
struct mmc_davinci_host *host = mmc_priv(mmc);
|
||||
|
||||
if (enable) {
|
||||
if (!(readl(host->base + DAVINCI_SDIOST0) & SDIOST0_DAT1_HI)) {
|
||||
writel(SDIOIST_IOINT, host->base + DAVINCI_SDIOIST);
|
||||
mmc_signal_sdio_irq(host->mmc);
|
||||
} else {
|
||||
host->sdio_int = true;
|
||||
writel(readl(host->base + DAVINCI_SDIOIEN) |
|
||||
SDIOIEN_IOINTEN, host->base + DAVINCI_SDIOIEN);
|
||||
}
|
||||
} else {
|
||||
host->sdio_int = false;
|
||||
writel(readl(host->base + DAVINCI_SDIOIEN) & ~SDIOIEN_IOINTEN,
|
||||
host->base + DAVINCI_SDIOIEN);
|
||||
}
|
||||
}
|
||||
|
||||
static struct mmc_host_ops mmc_davinci_ops = {
|
||||
.request = mmc_davinci_request,
|
||||
.set_ios = mmc_davinci_set_ios,
|
||||
.get_cd = mmc_davinci_get_cd,
|
||||
.get_ro = mmc_davinci_get_ro,
|
||||
.enable_sdio_irq = mmc_davinci_enable_sdio_irq,
|
||||
};
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
@ -1209,7 +1267,8 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
|
||||
host->nr_sg = MAX_NR_SG;
|
||||
|
||||
host->use_dma = use_dma;
|
||||
host->irq = irq;
|
||||
host->mmc_irq = irq;
|
||||
host->sdio_irq = platform_get_irq(pdev, 1);
|
||||
|
||||
if (host->use_dma && davinci_acquire_dma_channels(host) != 0)
|
||||
host->use_dma = 0;
|
||||
@ -1270,6 +1329,13 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
if (host->sdio_irq >= 0) {
|
||||
ret = request_irq(host->sdio_irq, mmc_davinci_sdio_irq, 0,
|
||||
mmc_hostname(mmc), host);
|
||||
if (!ret)
|
||||
mmc->caps |= MMC_CAP_SDIO_IRQ;
|
||||
}
|
||||
|
||||
rename_region(mem, mmc_hostname(mmc));
|
||||
|
||||
dev_info(mmc_dev(host->mmc), "Using %s, %d-bit mode\n",
|
||||
@ -1313,7 +1379,9 @@ static int __exit davinci_mmcsd_remove(struct platform_device *pdev)
|
||||
mmc_davinci_cpufreq_deregister(host);
|
||||
|
||||
mmc_remove_host(host->mmc);
|
||||
free_irq(host->irq, host);
|
||||
free_irq(host->mmc_irq, host);
|
||||
if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
|
||||
free_irq(host->sdio_irq, host);
|
||||
|
||||
davinci_release_dma_channels(host);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user