staging: add Fieldbus Device subsystem.

Fieldbus device (client) adapters allow data exchange with a PLC aka.
"Fieldbus Controller" over a fieldbus (Profinet, FLNet, etc.)

They are typically used when a Linux device wants to expose itself
as an actuator, motor, console light, switch, etc. over the fieldbus.

This framework is designed to provide a generic interface to Fieldbus
Devices from both the Linux Kernel and the userspace.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Kconfig

@@ -120,4 +120,6 @@ source "drivers/staging/axis-fifo/Kconfig"
 
 source "drivers/staging/erofs/Kconfig"
 
+source "drivers/staging/fieldbus/Kconfig"
+
 endif # STAGING

drivers/staging/Makefile

@@ -50,3 +50,4 @@ obj-$(CONFIG_SOC_MT7621)	+= mt7621-dts/
 obj-$(CONFIG_STAGING_GASKET_FRAMEWORK)	+= gasket/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_EROFS_FS)		+= erofs/
+obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/

drivers/staging/fieldbus/Documentation/ABI/fieldbus-dev-cdev

@@ -0,0 +1,31 @@
+What:		/dev/fieldbus_devX
+Date:		December 2018
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		The cdev interface to drivers for Fieldbus Device Memory
+			(aka. Process Memory).
+
+		The following file operations are supported:
+
+		open(2)
+		Create an I/O context associated with the file descriptor.
+
+		read(2)
+		Read from Process Memory's "read area".
+		Clears POLLERR | POLLPRI from the file descriptor.
+
+		write(2)
+		Write to Process Memory's "write area".
+
+		poll(2), select(2), epoll_wait(2) etc.
+		When a "Process Memory Read Area Changed" event occurs,
+		POLLERR | POLLPRI will be set on the file descriptor.
+		Note that POLLIN | POLLOUT events are always set, because the
+		process memory area is always readable and writable.
+
+		close(2)
+		Free up the I/O context that was associated
+		with the file descriptor.
+
+Users:		TBD

drivers/staging/fieldbus/Documentation/ABI/sysfs-class-fieldbus-dev

@@ -0,0 +1,62 @@
+What:		/sys/class/fieldbus_dev/fieldbus_devX/card_name
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		Human-readable name of the Fieldbus Device.
+
+What:		/sys/class/fieldbus_dev/fieldbus_devX/fieldbus_type
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		The type of fieldbus implemented by this device.
+		Possible values:
+			'unknown'
+			'profinet'
+
+What:		/sys/class/fieldbus_dev/fieldbus_devX/fieldbus_id
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		The unique fieldbus id associated with this device.
+		The exact format of this id is fieldbus type dependent, e.g.
+		a mac address for profinet.
+
+What:		/sys/class/fieldbus_dev/fieldbus_devX/read_area_size
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		The size, in bytes, of the Process Memory read area.
+		Note: this area is accessible by reading from the associated
+			character device (/dev/fieldbus_devX).
+
+What:		/sys/class/fieldbus_dev/fieldbus_devX/write_area_size
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		The size, in bytes, of the Process Memory write area.
+		Note: this area is accessible by writing to the associated
+			character device (/dev/fieldbus_devX)
+
+What:		/sys/class/fieldbus_dev/fieldbus_devX/online
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		Whether the fieldbus is online or offline.
+		Possible values:
+			'1' meaning 'online'
+			'0' meaning 'offline'
+		Note: an uevent is generated when this property changes.
+
+What:		/sys/class/fieldbus_dev/fieldbus_devX/enabled
+KernelVersion:	5.1 (staging)
+Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
+Description:
+		Whether the device is enabled (power on) or
+			disabled (power off).
+		Possible values:
+			'1' meaning enabled
+			'0' meaning disabled
+		Normally a r/o property, but optionally r/w:
+		Writing '1' enables the device (power on) with default
+			settings.
+		Writing '0' disables the card (power off).

drivers/staging/fieldbus/Documentation/fieldbus_dev.txt

@@ -0,0 +1,66 @@
+                       Fieldbus-Device Subsystem
+               ============================================
+
+Part 0 - What is a Fieldbus Device ?
+------------------------------------
+
+Fieldbus is the name of a family of industrial computer network protocols used
+for real-time distributed control, standardized as IEC 61158.
+
+A complex automated industrial system -- such as manufacturing assembly line --
+usually needs a distributed control system -- an organized hierarchy of
+controller systems -- to function. In this hierarchy, there is usually a
+Human Machine Interface (HMI) at the top, where an operator can monitor or
+operate the system. This is typically linked to a middle layer of programmable
+logic controllers (PLC) via a non-time-critical communications system
+(e.g. Ethernet). At the bottom of the control chain is the fieldbus that links
+the PLCs to the components that actually do the work, such as sensors,
+actuators, electric motors, console lights, switches, valves and contactors.
+
+(Source: Wikipedia)
+
+A "Fieldbus Device" is such an actuator, motor, console light, switch, ...
+controlled via the Fieldbus by a PLC aka "Fieldbus Controller".
+
+Communication between PLC and device typically happens via process data memory,
+separated into input and output areas. The Fieldbus then cyclically transfers
+the PLC's output area to the device's input area, and vice versa.
+
+Part I - Why do we need this subsystem?
+---------------------------------------
+
+Fieldbus device (client) adapters are commercially available. They allow data
+exchange with a PLC aka "Fieldbus Controller" via process data memory.
+
+They are typically used when a Linux device wants to expose itself as an
+actuator, motor, console light, switch, etc. over the fieldbus.
+
+The purpose of this subsystem is:
+a) present a general, standardized, extensible API/ABI to userspace; and
+b) present a convenient interface to drivers.
+
+Part II - How can drivers use the subsystem?
+--------------------------------------------
+
+Any driver that wants to register as a Fieldbus Device should allocate and
+populate a 'struct fieldbus_dev' (from include/linux/fieldbus_dev.h).
+Registration then happens by calling fieldbus_dev_register().
+
+Part III - How can userspace use the subsystem?
+-----------------------------------------------
+
+Fieldbus protocols and adapters are diverse and varied. However, they share
+a limited few common behaviours and properties. This allows us to define
+a simple interface consisting of a character device and a set of sysfs files:
+
+See:
+Documentation/ABI/testing/sysfs-class-fieldbus-dev
+Documentation/ABI/testing/fieldbus-dev-cdev
+
+Note that this simple interface does not provide a way to modify adapter
+configuration settings. It is therefore useful only for adapters that get their
+configuration settings some other way, e.g. non-volatile memory on the adapter,
+through the network, ...
+
+At a later phase, this simple interface can easily co-exist with a future
+(netlink-based ?) configuration settings interface.

drivers/staging/fieldbus/Kconfig

@@ -0,0 +1,19 @@
+menuconfig FIELDBUS_DEV
+	tristate "Fieldbus Device Support"
+	help
+	  Support for Fieldbus Device Adapters.
+
+	  Fieldbus device (client) adapters allow data exchange with a PLC aka.
+	  "Fieldbus Controller" over a fieldbus (Profinet, FLNet, etc.)
+
+	  They are typically used when a Linux device wants to expose itself
+	  as an actuator, motor, console light, switch, etc. over the fieldbus.
+
+	  This framework is designed to provide a generic interface to Fieldbus
+	  Devices from both the Linux Kernel and the userspace.
+
+	  If unsure, say no.
+
+if FIELDBUS_DEV
+
+endif

drivers/staging/fieldbus/Makefile

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for fieldbus_dev drivers.
+#
+
+obj-$(CONFIG_FIELDBUS_DEV)	+= fieldbus_dev.o
+fieldbus_dev-y			:= dev_core.o
+
+# Devices

drivers/staging/fieldbus/dev_core.c

@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fieldbus Device Driver Core
+ *
+ */
+
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/idr.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+
+/* move to <linux/fieldbus_dev.h> when taking this out of staging */
+#include "fieldbus_dev.h"
+
+/* Maximum number of fieldbus devices */
+#define MAX_FIELDBUSES		32
+
+/* the dev_t structure to store the dynamically allocated fieldbus devices */
+static dev_t fieldbus_devt;
+static DEFINE_IDA(fieldbus_ida);
+static DEFINE_MUTEX(fieldbus_mtx);
+
+static const char ctrl_enabled[] = "enabled";
+static const char ctrl_disabled[] = "disabled";
+
+static ssize_t online_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", !!fb->online);
+}
+static DEVICE_ATTR_RO(online);
+
+static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+
+	if (!fb->enable_get)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", !!fb->enable_get(fb));
+}
+
+static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t n)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+	bool value;
+	int ret;
+
+	if (!fb->simple_enable_set)
+		return -ENOTSUPP;
+	ret = kstrtobool(buf, &value);
+	if (ret)
+		return ret;
+	ret = fb->simple_enable_set(fb, value);
+	if (ret < 0)
+		return ret;
+	return n;
+}
+static DEVICE_ATTR_RW(enabled);
+
+static ssize_t card_name_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+
+	/*
+	 * card_name was provided by child driver, could potentially be long.
+	 * protect against buffer overrun.
+	 */
+	return snprintf(buf, PAGE_SIZE, "%s\n", fb->card_name);
+}
+static DEVICE_ATTR_RO(card_name);
+
+static ssize_t read_area_size_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%zu\n", fb->read_area_sz);
+}
+static DEVICE_ATTR_RO(read_area_size);
+
+static ssize_t write_area_size_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%zu\n", fb->write_area_sz);
+}
+static DEVICE_ATTR_RO(write_area_size);
+
+static ssize_t fieldbus_id_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+
+	return fb->fieldbus_id_get(fb, buf, PAGE_SIZE);
+}
+static DEVICE_ATTR_RO(fieldbus_id);
+
+static ssize_t fieldbus_type_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+	const char *t;
+
+	switch (fb->fieldbus_type) {
+	case FIELDBUS_DEV_TYPE_PROFINET:
+		t = "profinet";
+		break;
+	default:
+		t = "unknown";
+		break;
+	}
+
+	return sprintf(buf, "%s\n", t);
+}
+static DEVICE_ATTR_RO(fieldbus_type);
+
+static struct attribute *fieldbus_attrs[] = {
+	&dev_attr_enabled.attr,
+	&dev_attr_card_name.attr,
+	&dev_attr_fieldbus_id.attr,
+	&dev_attr_read_area_size.attr,
+	&dev_attr_write_area_size.attr,
+	&dev_attr_online.attr,
+	&dev_attr_fieldbus_type.attr,
+	NULL,
+};
+
+static umode_t fieldbus_is_visible(struct kobject *kobj, struct attribute *attr,
+				   int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct fieldbus_dev *fb = dev_get_drvdata(dev);
+	umode_t mode = attr->mode;
+
+	if (attr == &dev_attr_enabled.attr) {
+		mode = 0;
+		if (fb->enable_get)
+			mode |= 0444;
+		if (fb->simple_enable_set)
+			mode |= 0200;
+	}
+
+	return mode;
+}
+
+static const struct attribute_group fieldbus_group = {
+	.attrs = fieldbus_attrs,
+	.is_visible = fieldbus_is_visible,
+};
+__ATTRIBUTE_GROUPS(fieldbus);
+
+static struct class fieldbus_class = {
+	.name =		"fieldbus_dev",
+	.owner =	THIS_MODULE,
+	.dev_groups =	fieldbus_groups,
+};
+
+struct fb_open_file {
+	struct fieldbus_dev *fbdev;
+	int dc_event;
+};
+
+static int fieldbus_open(struct inode *inode, struct file *filp)
+{
+	struct fb_open_file *of;
+	struct fieldbus_dev *fbdev = container_of(inode->i_cdev,
+						struct fieldbus_dev,
+						cdev);
+
+	of = kzalloc(sizeof(*of), GFP_KERNEL);
+	if (!of)
+		return -ENOMEM;
+	of->fbdev = fbdev;
+	filp->private_data = of;
+	return 0;
+}
+
+static int fieldbus_release(struct inode *node, struct file *filp)
+{
+	struct fb_open_file *of = filp->private_data;
+
+	kfree(of);
+	return 0;
+}
+
+static ssize_t fieldbus_read(struct file *filp, char __user *buf, size_t size,
+			     loff_t *offset)
+{
+	struct fb_open_file *of = filp->private_data;
+	struct fieldbus_dev *fbdev = of->fbdev;
+
+	of->dc_event = fbdev->dc_event;
+	return fbdev->read_area(fbdev, buf, size, offset);
+}
+
+static ssize_t fieldbus_write(struct file *filp, const char __user *buf,
+			      size_t size, loff_t *offset)
+{
+	struct fb_open_file *of = filp->private_data;
+	struct fieldbus_dev *fbdev = of->fbdev;
+
+	return fbdev->write_area(fbdev, buf, size, offset);
+}
+
+static unsigned int fieldbus_poll(struct file *filp, poll_table *wait)
+{
+	struct fb_open_file *of = filp->private_data;
+	struct fieldbus_dev *fbdev = of->fbdev;
+	unsigned int mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM;
+
+	poll_wait(filp, &fbdev->dc_wq, wait);
+	/* data changed ? */
+	if (fbdev->dc_event != of->dc_event)
+		mask |= POLLPRI | POLLERR;
+	return mask;
+}
+
+static const struct file_operations fieldbus_fops = {
+	.open		= fieldbus_open,
+	.release	= fieldbus_release,
+	.read		= fieldbus_read,
+	.write		= fieldbus_write,
+	.poll		= fieldbus_poll,
+	.llseek		= generic_file_llseek,
+	.owner		= THIS_MODULE,
+};
+
+void fieldbus_dev_area_updated(struct fieldbus_dev *fb)
+{
+	fb->dc_event++;
+	wake_up_all(&fb->dc_wq);
+}
+EXPORT_SYMBOL_GPL(fieldbus_dev_area_updated);
+
+void fieldbus_dev_online_changed(struct fieldbus_dev *fb, bool online)
+{
+	fb->online = online;
+	kobject_uevent(&fb->dev->kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(fieldbus_dev_online_changed);
+
+static void __fieldbus_dev_unregister(struct fieldbus_dev *fb)
+{
+	if (!fb)
+		return;
+	device_destroy(&fieldbus_class, fb->cdev.dev);
+	cdev_del(&fb->cdev);
+	ida_simple_remove(&fieldbus_ida, fb->id);
+}
+
+void fieldbus_dev_unregister(struct fieldbus_dev *fb)
+{
+	mutex_lock(&fieldbus_mtx);
+	__fieldbus_dev_unregister(fb);
+	mutex_unlock(&fieldbus_mtx);
+}
+EXPORT_SYMBOL_GPL(fieldbus_dev_unregister);
+
+static int __fieldbus_dev_register(struct fieldbus_dev *fb)
+{
+	dev_t devno;
+	int err;
+
+	if (!fb)
+		return -EINVAL;
+	if (!fb->read_area || !fb->write_area || !fb->fieldbus_id_get)
+		return -EINVAL;
+	fb->id = ida_simple_get(&fieldbus_ida, 0, MAX_FIELDBUSES, GFP_KERNEL);
+	if (fb->id < 0)
+		return fb->id;
+	devno = MKDEV(MAJOR(fieldbus_devt), fb->id);
+	init_waitqueue_head(&fb->dc_wq);
+	cdev_init(&fb->cdev, &fieldbus_fops);
+	err = cdev_add(&fb->cdev, devno, 1);
+	if (err) {
+		pr_err("fieldbus_dev%d unable to add device %d:%d\n",
+		       fb->id, MAJOR(fieldbus_devt), fb->id);
+		goto err_cdev;
+	}
+	fb->dev = device_create(&fieldbus_class, fb->parent, devno, fb,
+				"fieldbus_dev%d", fb->id);
+	if (IS_ERR(fb->dev)) {
+		err = PTR_ERR(fb->dev);
+		goto err_dev_create;
+	}
+	return 0;
+
+err_dev_create:
+	cdev_del(&fb->cdev);
+err_cdev:
+	ida_simple_remove(&fieldbus_ida, fb->id);
+	return err;
+}
+
+int fieldbus_dev_register(struct fieldbus_dev *fb)
+{
+	int err;
+
+	mutex_lock(&fieldbus_mtx);
+	err = __fieldbus_dev_register(fb);
+	mutex_unlock(&fieldbus_mtx);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(fieldbus_dev_register);
+
+static int __init fieldbus_init(void)
+{
+	int err;
+
+	err = class_register(&fieldbus_class);
+	if (err < 0) {
+		pr_err("fieldbus_dev: could not register class\n");
+		return err;
+	}
+	err = alloc_chrdev_region(&fieldbus_devt, 0,
+				  MAX_FIELDBUSES, "fieldbus_dev");
+	if (err < 0) {
+		pr_err("fieldbus_dev: unable to allocate char dev region\n");
+		goto err_alloc;
+	}
+	return 0;
+
+err_alloc:
+	class_unregister(&fieldbus_class);
+	return err;
+}
+
+static void __exit fieldbus_exit(void)
+{
+	unregister_chrdev_region(fieldbus_devt, MAX_FIELDBUSES);
+	class_unregister(&fieldbus_class);
+	ida_destroy(&fieldbus_ida);
+}
+
+subsys_initcall(fieldbus_init);
+module_exit(fieldbus_exit);
+
+MODULE_AUTHOR("Sven Van Asbroeck <TheSven73@gmail.com>");
+MODULE_AUTHOR("Jonathan Stiles <jonathans@arcx.com>");
+MODULE_DESCRIPTION("Fieldbus Device Driver Core");
+MODULE_LICENSE("GPL v2");

drivers/staging/fieldbus/fieldbus_dev.h

@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Fieldbus Device Driver Core
+ *
+ */
+
+#ifndef __FIELDBUS_DEV_H
+#define __FIELDBUS_DEV_H
+
+#include <linux/cdev.h>
+#include <linux/wait.h>
+
+enum fieldbus_dev_type {
+	FIELDBUS_DEV_TYPE_UNKNOWN = 0,
+	FIELDBUS_DEV_TYPE_PROFINET,
+};
+
+/**
+ * struct fieldbus_dev - Fieldbus device
+ * @read_area:		[DRIVER] function to read the process data area of the
+ *				 device. same parameters/return values as
+ *				 the read function in struct file_operations
+ * @write_area:		[DRIVER] function to write to the process data area of
+ *				 the device. same parameters/return values as
+ *				 the write function in struct file_operations
+ * @write_area_sz	[DRIVER] size of the writable process data area
+ * @read_area_sz	[DRIVER] size of the readable process data area
+ * @card_name		[DRIVER] name of the card, e.g. "ACME Inc. profinet"
+ * @fieldbus_type	[DRIVER] fieldbus type of this device, e.g.
+ *					FIELDBUS_DEV_TYPE_PROFINET
+ * @enable_get		[DRIVER] function which returns true if the card
+ *				 is enabled, false otherwise
+ * @fieldbus_id_get	[DRIVER] function to retrieve the unique fieldbus id
+ *				 by which this device can be identified;
+ *				 return value follows the snprintf convention
+ * @simple_enable_set	[DRIVER] (optional) function to enable the device
+ *				 according to its default settings
+ * @parent		[DRIVER] (optional) the device's parent device
+ */
+struct fieldbus_dev {
+	ssize_t (*read_area)(struct fieldbus_dev *fbdev, char __user *buf,
+			     size_t size, loff_t *offset);
+	ssize_t (*write_area)(struct fieldbus_dev *fbdev,
+			      const char __user *buf, size_t size,
+			      loff_t *offset);
+	size_t write_area_sz, read_area_sz;
+	const char *card_name;
+	enum fieldbus_dev_type fieldbus_type;
+	bool (*enable_get)(struct fieldbus_dev *fbdev);
+	int (*fieldbus_id_get)(struct fieldbus_dev *fbdev, char *buf,
+			       size_t max_size);
+	int (*simple_enable_set)(struct fieldbus_dev *fbdev, bool enable);
+	struct device *parent;
+
+	/* private data */
+	int id;
+	struct cdev cdev;
+	struct device *dev;
+	int dc_event;
+	wait_queue_head_t dc_wq;
+	bool online;
+};
+
+#if IS_ENABLED(CONFIG_FIELDBUS_DEV)
+
+/**
+ * fieldbus_dev_unregister()
+ *	- unregister a previously registered fieldbus device
+ * @fb:		Device structure previously registered
+ **/
+void fieldbus_dev_unregister(struct fieldbus_dev *fb);
+
+/**
+ * fieldbus_dev_register()
+ *	- register a device with the fieldbus device subsystem
+ * @fb:		Device structure filled by the device driver
+ **/
+int __must_check fieldbus_dev_register(struct fieldbus_dev *fb);
+
+/**
+ * fieldbus_dev_area_updated()
+ *	- notify the subsystem that an external fieldbus controller updated
+ *			the process data area
+ * @fb:		Device structure
+ **/
+void fieldbus_dev_area_updated(struct fieldbus_dev *fb);
+
+/**
+ * fieldbus_dev_online_changed()
+ *	- notify the subsystem that the fieldbus online status changed
+ * @fb:		Device structure
+ **/
+void fieldbus_dev_online_changed(struct fieldbus_dev *fb, bool online);
+
+#else /* IS_ENABLED(CONFIG_FIELDBUS_DEV) */
+
+static inline void fieldbus_dev_unregister(struct fieldbus_dev *fb) {}
+static inline int __must_check fieldbus_dev_register(struct fieldbus_dev *fb)
+{
+	return -ENOTSUPP;
+}
+
+static inline void fieldbus_dev_area_updated(struct fieldbus_dev *fb) {}
+static inline void fieldbus_dev_online_changed(struct fieldbus_dev *fb,
+					       bool online) {}
+
+#endif /* IS_ENABLED(CONFIG_FIELDBUS_DEV) */
+#endif /* __FIELDBUS_DEV_H */