forked from Minki/linux
bnxt_en: Refactor and simplify coalescing code.
The mapping of the ethtool coalescing parameters to hardware parameters is now done in bnxt_hwrm_set_coal_params(). The same function can handle both RX and TX settings. The code is now more clear. Some adjustments have been made to get better hardware settings. The coal_frames setting is now accurately set in hardware. The max_timer is set to coal_ticks value. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
18775aa8a9
commit
f8503969d2
@ -4537,19 +4537,42 @@ static int bnxt_hwrm_check_tx_rings(struct bnxt *bp, int tx_rings)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void bnxt_hwrm_set_coal_params(struct bnxt *bp, u32 max_bufs,
|
||||
u32 buf_tmrs, u16 flags,
|
||||
static void bnxt_hwrm_set_coal_params(struct bnxt_coal *hw_coal,
|
||||
struct hwrm_ring_cmpl_ring_cfg_aggint_params_input *req)
|
||||
{
|
||||
u16 val, tmr, max, flags;
|
||||
|
||||
max = hw_coal->bufs_per_record * 128;
|
||||
if (hw_coal->budget)
|
||||
max = hw_coal->bufs_per_record * hw_coal->budget;
|
||||
|
||||
val = clamp_t(u16, hw_coal->coal_bufs, 1, max);
|
||||
req->num_cmpl_aggr_int = cpu_to_le16(val);
|
||||
req->num_cmpl_dma_aggr = cpu_to_le16(val);
|
||||
|
||||
val = clamp_t(u16, hw_coal->coal_bufs_irq, 1, max);
|
||||
req->num_cmpl_dma_aggr_during_int = cpu_to_le16(val);
|
||||
|
||||
tmr = BNXT_USEC_TO_COAL_TIMER(hw_coal->coal_ticks);
|
||||
tmr = max_t(u16, tmr, 1);
|
||||
req->int_lat_tmr_max = cpu_to_le16(tmr);
|
||||
|
||||
/* min timer set to 1/2 of interrupt timer */
|
||||
val = tmr / 2;
|
||||
req->int_lat_tmr_min = cpu_to_le16(val);
|
||||
|
||||
/* buf timer set to 1/4 of interrupt timer */
|
||||
val = max_t(u16, tmr / 4, 1);
|
||||
req->cmpl_aggr_dma_tmr = cpu_to_le16(val);
|
||||
|
||||
tmr = BNXT_USEC_TO_COAL_TIMER(hw_coal->coal_ticks_irq);
|
||||
tmr = max_t(u16, tmr, 1);
|
||||
req->cmpl_aggr_dma_tmr_during_int = cpu_to_le16(tmr);
|
||||
|
||||
flags = RING_CMPL_RING_CFG_AGGINT_PARAMS_REQ_FLAGS_TIMER_RESET;
|
||||
if (hw_coal->idle_thresh && hw_coal->coal_ticks < hw_coal->idle_thresh)
|
||||
flags |= RING_CMPL_RING_CFG_AGGINT_PARAMS_REQ_FLAGS_RING_IDLE;
|
||||
req->flags = cpu_to_le16(flags);
|
||||
req->num_cmpl_dma_aggr = cpu_to_le16((u16)max_bufs);
|
||||
req->num_cmpl_dma_aggr_during_int = cpu_to_le16(max_bufs >> 16);
|
||||
req->cmpl_aggr_dma_tmr = cpu_to_le16((u16)buf_tmrs);
|
||||
req->cmpl_aggr_dma_tmr_during_int = cpu_to_le16(buf_tmrs >> 16);
|
||||
/* Minimum time between 2 interrupts set to buf_tmr x 2 */
|
||||
req->int_lat_tmr_min = cpu_to_le16((u16)buf_tmrs * 2);
|
||||
req->int_lat_tmr_max = cpu_to_le16((u16)buf_tmrs * 4);
|
||||
req->num_cmpl_aggr_int = cpu_to_le16((u16)max_bufs * 4);
|
||||
}
|
||||
|
||||
int bnxt_hwrm_set_coal(struct bnxt *bp)
|
||||
@ -4557,48 +4580,14 @@ int bnxt_hwrm_set_coal(struct bnxt *bp)
|
||||
int i, rc = 0;
|
||||
struct hwrm_ring_cmpl_ring_cfg_aggint_params_input req_rx = {0},
|
||||
req_tx = {0}, *req;
|
||||
u16 max_buf, max_buf_irq;
|
||||
u16 buf_tmr, buf_tmr_irq;
|
||||
u32 flags;
|
||||
|
||||
bnxt_hwrm_cmd_hdr_init(bp, &req_rx,
|
||||
HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS, -1, -1);
|
||||
bnxt_hwrm_cmd_hdr_init(bp, &req_tx,
|
||||
HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS, -1, -1);
|
||||
|
||||
/* Each rx completion (2 records) should be DMAed immediately.
|
||||
* DMA 1/4 of the completion buffers at a time.
|
||||
*/
|
||||
max_buf = min_t(u16, bp->rx_coal.coal_bufs / 4, 2);
|
||||
/* max_buf must not be zero */
|
||||
max_buf = clamp_t(u16, max_buf, 1, 63);
|
||||
max_buf_irq = clamp_t(u16, bp->rx_coal.coal_bufs_irq, 1, 63);
|
||||
buf_tmr = BNXT_USEC_TO_COAL_TIMER(bp->rx_coal.coal_ticks);
|
||||
/* buf timer set to 1/4 of interrupt timer */
|
||||
buf_tmr = max_t(u16, buf_tmr / 4, 1);
|
||||
buf_tmr_irq = BNXT_USEC_TO_COAL_TIMER(bp->rx_coal.coal_ticks_irq);
|
||||
buf_tmr_irq = max_t(u16, buf_tmr_irq, 1);
|
||||
|
||||
flags = RING_CMPL_RING_CFG_AGGINT_PARAMS_REQ_FLAGS_TIMER_RESET;
|
||||
|
||||
if (bp->rx_coal.coal_ticks < bp->rx_coal.idle_thresh)
|
||||
flags |= RING_CMPL_RING_CFG_AGGINT_PARAMS_REQ_FLAGS_RING_IDLE;
|
||||
|
||||
bnxt_hwrm_set_coal_params(bp, max_buf_irq << 16 | max_buf,
|
||||
buf_tmr_irq << 16 | buf_tmr, flags, &req_rx);
|
||||
|
||||
/* max_buf must not be zero */
|
||||
max_buf = clamp_t(u16, bp->tx_coal.coal_bufs, 1, 63);
|
||||
max_buf_irq = clamp_t(u16, bp->tx_coal.coal_bufs_irq, 1, 63);
|
||||
buf_tmr = BNXT_USEC_TO_COAL_TIMER(bp->tx_coal.coal_ticks);
|
||||
/* buf timer set to 1/4 of interrupt timer */
|
||||
buf_tmr = max_t(u16, buf_tmr / 4, 1);
|
||||
buf_tmr_irq = BNXT_USEC_TO_COAL_TIMER(bp->tx_coal.coal_ticks_irq);
|
||||
buf_tmr_irq = max_t(u16, buf_tmr_irq, 1);
|
||||
|
||||
flags = RING_CMPL_RING_CFG_AGGINT_PARAMS_REQ_FLAGS_TIMER_RESET;
|
||||
bnxt_hwrm_set_coal_params(bp, max_buf_irq << 16 | max_buf,
|
||||
buf_tmr_irq << 16 | buf_tmr, flags, &req_tx);
|
||||
bnxt_hwrm_set_coal_params(&bp->rx_coal, &req_rx);
|
||||
bnxt_hwrm_set_coal_params(&bp->tx_coal, &req_tx);
|
||||
|
||||
mutex_lock(&bp->hwrm_cmd_lock);
|
||||
for (i = 0; i < bp->cp_nr_rings; i++) {
|
||||
|
Loading…
Reference in New Issue
Block a user