Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 into next/cleanup

* 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6:
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file

(update to v3.3-rc7)

Conflicts:
	arch/arm/mach-s3c2440/common.h

Documentation/devicetree/bindings/gpio/led.txt

@@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
-  low LEDs should be indicated using flags in the GPIO specifier.
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -30,6 +30,7 @@ national	National Semiconductor
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International

Documentation/hwmon/jc42

@@ -7,21 +7,29 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
+  * Atmel AT30TS00
-    Prefix: 'tse2002b3', 'ts3000b3'
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
+	http://www.atmel.com/Images/doc8585.pdf
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@ Supported chips:
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f

Documentation/input/alps.txt

@@ -13,7 +13,8 @@ Detection
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -962,7 +962,7 @@ F:	drivers/tty/serial/msm_serial.c
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1310,7 +1310,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1318,7 +1318,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/Kconfig

@@ -1283,7 +1283,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer

arch/arm/boot/.gitignore

@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb

arch/arm/include/asm/pmu.h

@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,

arch/arm/kernel/Makefile

@@ -62,9 +62,6 @@ obj-$(CONFIG_SWP_EMULATE)	+= swp_emulate.o
 CFLAGS_swp_emulate.o		:= -Wa,-march=armv7-a
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 
-obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
-AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
-
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o

arch/arm/kernel/ecard.c

@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

arch/arm/kernel/perf_event.c

@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");

arch/arm/kernel/perf_event_v6.c

@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_v7.c

@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_xscale.c

@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+#if defined(CONFIG_OF)
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+	struct device_node *of_node =
-	platform_device_register(&at_hdmac_device);
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else

arch/arm/mach-ep93xx/Makefile

@@ -8,6 +8,9 @@ obj-			:=
 
 obj-$(CONFIG_EP93XX_DMA)	+= dma.o
 
+obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
+AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
+
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o

arch/arm/mach-ep93xx/adssphere.c

@@ -20,6 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
 
 static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,

arch/arm/mach-ep93xx/clock.c

@@ -25,6 +25,7 @@
 
 #include <asm/div64.h>
 
+#include "soc.h"
 
 struct clk {
 	struct clk	*parent;

arch/arm/mach-ep93xx/core.c

@@ -46,6 +46,7 @@
 
 #include <asm/hardware/vic.h>
 
+#include "soc.h"
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
@@ -204,7 +205,6 @@ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
 
 	spin_unlock_irqrestore(&syscon_swlock, flags);
 }
-EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
 
 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 {
@@ -221,7 +221,6 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 
 	spin_unlock_irqrestore(&syscon_swlock, flags);
 }
-EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
 
 /**
  * ep93xx_chip_revision() - returns the EP93xx chip revision
@@ -648,9 +647,19 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+/* The backlight use a single register in the framebuffer's register space */
+#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
+
+static struct resource ep93xx_bl_resources[] = {
+	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
+		       EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
+};
+
 static struct platform_device ep93xx_bl_device = {
 	.name		= "ep93xx-bl",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_bl_resources),
+	.resource	= ep93xx_bl_resources,
 };
 
 /**
@@ -783,23 +792,12 @@ void __init ep93xx_register_i2s(void)
 #define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
 					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
 
-int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+int ep93xx_i2s_acquire(void)
 {
 	unsigned val;
 
-	/* Sanity check */
+	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
-	if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
+			EP93XX_SYSCON_DEVCFG_I2S_MASK);
-		return -EINVAL;
-	if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
-		return -EINVAL;
-
-	/* Must have only one of I2SONSSP/I2SONAC97 set */
-	if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
-	    (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
-		return -EINVAL;
-
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-	ep93xx_devcfg_set_bits(i2s_pins);
 
 	/*
 	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
@@ -809,7 +807,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
 	 */
 	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
 	val &= ~EP93XX_I2SCLKDIV_MASK;
-	val |= i2s_config;
+	val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
 	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
 
 	return 0;
@@ -856,11 +854,32 @@ void __init ep93xx_register_ac97(void)
 	platform_device_register(&ep93xx_pcm_device);
 }
 
+/*************************************************************************
+ * EP93xx Watchdog
+ *************************************************************************/
+static struct resource ep93xx_wdt_resources[] = {
+	DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
+};
+
+static struct platform_device ep93xx_wdt_device = {
+	.name		= "ep93xx-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_wdt_resources),
+	.resource	= ep93xx_wdt_resources,
+};
+
 void __init ep93xx_init_devices(void)
 {
 	/* Disallow access to MaverickCrunch initially */
 	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
+	/* Default all ports to GPIO */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+			       EP93XX_SYSCON_DEVCFG_GONK |
+			       EP93XX_SYSCON_DEVCFG_EONIDE |
+			       EP93XX_SYSCON_DEVCFG_GONIDE |
+			       EP93XX_SYSCON_DEVCFG_HONIDE);
+
 	/* Get the GPIO working early, other devices need it */
 	platform_device_register(&ep93xx_gpio_device);
 
@@ -871,6 +890,7 @@ void __init ep93xx_init_devices(void)
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
 	platform_device_register(&ep93xx_leds);
+	platform_device_register(&ep93xx_wdt_device);
 }
 
 void ep93xx_restart(char mode, const char *cmd)

arch/arm/mach-ep93xx/crunch.c

@@ -16,9 +16,11 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/ep93xx-regs.h>
+
 #include <asm/thread_notify.h>
 
+#include "soc.h"
+
 struct crunch_state *crunch_owner;
 
 void crunch_task_release(struct thread_info *thread)

arch/arm/mach-ep93xx/dma.c

@@ -28,6 +28,8 @@
 #include <mach/dma.h>
 #include <mach/hardware.h>
 
+#include "soc.h"
+
 #define DMA_CHANNEL(_name, _base, _irq) \
 	{ .name = (_name), .base = (_base), .irq = (_irq) }
 

arch/arm/mach-ep93xx/edb93xx.c

@@ -43,6 +43,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
 
 static void __init edb93xx_register_flash(void)
 {

arch/arm/mach-ep93xx/gesbc9312.c

@@ -20,6 +20,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
 
 static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -5,40 +5,6 @@
 #ifndef __ASM_ARCH_EP93XX_REGS_H
 #define __ASM_ARCH_EP93XX_REGS_H
 
-/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected.  When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information.  This document can be found at:
- *
- *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE		0x10000000
-#define EP93XX_CS2_PHYS_BASE		0x20000000
-#define EP93XX_CS3_PHYS_BASE		0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
-#define EP93XX_CS6_PHYS_BASE		0x60000000
-#define EP93XX_CS7_PHYS_BASE		0x70000000
-#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
-
 /*
  * EP93xx linux memory map:
  *
@@ -62,58 +28,7 @@
 #define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
-
+/* APB UARTs */
-/* AHB peripherals */
-#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
-
-#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
-#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
-
-#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
-#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
-
-#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
-#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
-
-#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
-
-#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
-
-#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
-
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
-
-#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
-#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
-
-#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
-
-#define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
-#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
-#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
-#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
-
-#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
-#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
-
-#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
-#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
-
-#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
-
 #define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
@@ -123,108 +38,4 @@
 #define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
-#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
-#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
-
-#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
-
-#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
-#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
-
-#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
-#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
-
-#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
-#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
-#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
-#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLKSET1_NBYP1	(1<<23)
-#define EP93XX_SYSCON_CLKSET2		EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_CLKSET2_NBYP2	(1<<19)
-#define EP93XX_SYSCON_CLKSET2_PLL2_EN	(1<<18)
-#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
-#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
-#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
-#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
-#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
-#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
-#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
-#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
-#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
-#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
-#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
-#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
-#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
-#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
-#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
-#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
-#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
-#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
-#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
-#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
-#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
-#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
-#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
-#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
-#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
-#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
-#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
-#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
-#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
-#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
-#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
-#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
-#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
-#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
-#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
-#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV128 	(2 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV_MASK 	(3 << 17)
-#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
-#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
-#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
-#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
-#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
-#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
-#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
-#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
-#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
-#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
-#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
-#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
-#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
-
-#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-
-
 #endif

arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h

@@ -3,6 +3,16 @@
 #ifndef __GPIO_EP93XX_H
 #define __GPIO_EP93XX_H
 
+#include <mach/ep93xx-regs.h>
+
+#define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
+#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
+#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
+
 /* GPIO port A.  */
 #define EP93XX_GPIO_LINE_A(x)		((x) + 0)
 #define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)

arch/arm/mach-ep93xx/include/mach/hardware.h

@@ -5,7 +5,6 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <mach/ep93xx-regs.h>
 #include <mach/platform.h>
 
 /*

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -21,20 +21,6 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 
-/* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
-
-static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(bits, 0x00);
-}
-
-static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(0x00, bits);
-}
-
 #define EP93XX_CHIP_REV_D0	3
 #define EP93XX_CHIP_REV_D1	4
 #define EP93XX_CHIP_REV_E0	5
@@ -59,7 +45,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
 void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_register_i2s(void);
-int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
+int ep93xx_i2s_acquire(void);
 void ep93xx_i2s_release(void);
 void ep93xx_register_ac97(void);
 

arch/arm/mach-ep93xx/micro9.c

@@ -22,6 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
 
 /*************************************************************************
  * Micro9 NOR Flash

arch/arm/mach-ep93xx/simone.c

@@ -29,6 +29,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
+
 static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };

arch/arm/mach-ep93xx/snappercl15.c

@@ -35,6 +35,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
+
 #define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
 
 #define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */

arch/arm/mach-ep93xx/soc.h

@@ -0,0 +1,213 @@
+/*
+ * arch/arm/mach-ep93xx/soc.h
+ *
+ * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
+ * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _EP93XX_SOC_H
+#define _EP93XX_SOC_H
+
+#include <mach/ep93xx-regs.h>
+
+/*
+ * EP93xx Physical Memory Map:
+ *
+ * The ASDO pin is sampled at system reset to select a synchronous or
+ * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
+ * the synchronous boot mode is selected.  When ASDO is "0" (i.e
+ * pulled-down) the asynchronous boot mode is selected.
+ *
+ * In synchronous boot mode nSDCE3 is decoded starting at physical address
+ * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
+ * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
+ * decoded at 0xf0000000.
+ *
+ * There is known errata for the EP93xx dealing with External Memory
+ * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
+ * Guidelines" for more information.  This document can be found at:
+ *
+ *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+
+#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
+#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
+#define EP93XX_CS1_PHYS_BASE		0x10000000
+#define EP93XX_CS2_PHYS_BASE		0x20000000
+#define EP93XX_CS3_PHYS_BASE		0x30000000
+#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
+#define EP93XX_CS6_PHYS_BASE		0x60000000
+#define EP93XX_CS7_PHYS_BASE		0x70000000
+#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
+#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
+#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
+#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
+#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
+
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
+#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
+
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
+#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
+
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
+#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
+
+#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
+
+#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
+
+#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
+
+#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
+#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
+
+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
+
+#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
+#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
+
+#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
+#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
+
+#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
+
+#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
+
+#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
+
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
+#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
+
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
+#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
+
+#define EP93XX_WATCHDOG_PHYS_BASE	EP93XX_APB_PHYS(0x00140000)
+#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
+
+/* System controller */
+#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
+#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
+#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1	(1<<23)
+#define EP93XX_SYSCON_CLKSET2		EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2	(1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
+#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
+#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
+#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
+#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
+#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
+#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
+#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
+#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
+#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV128	(2 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV_MASK	(3 << 17)
+#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
+#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(0x00, bits);
+}
+
+#endif /* _EP93XX_SOC_H */

arch/arm/mach-ep93xx/ts72xx.c

@@ -28,6 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -34,10 +34,13 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
+#include "soc.h"
+
 /*************************************************************************
  * Static I/O mappings for the FPGA
  *************************************************************************/
@@ -361,6 +364,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {

arch/arm/mach-omap2/id.c

@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/mailbox.c

@@ -420,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-/* must be ready before omap3isp is probed */
+module_init(omap2_mbox_init);
-subsys_initcall(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");

arch/arm/mach-omap2/omap-iommu.c

@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

arch/arm/mach-omap2/omap4-common.c

@@ -31,6 +31,7 @@
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)

arch/arm/mach-omap2/twl-common.c

@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE

arch/arm/mach-pxa/generic.h

@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration

arch/arm/mach-pxa/pxa25x.c

@@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -367,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,

arch/arm/mach-pxa/pxa27x.c

@@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -455,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa3xx.c

@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa95x.c

@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-s3c24xx/common.h

@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C2410 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
-#define __ARCH_ARM_MACH_S3C2410_COMMON_H
-
-#ifdef CONFIG_CPU_S3C2410
-void s3c2410_restart(char mode, const char *cmd);
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-void s3c2440_restart(char mode, const char *cmd);
-#endif
-
-#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -488,5 +488,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c24xx/s3c2440.c

@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}

arch/arm/mach-s3c24xx/s3c244x.c

@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}

arch/arm/mach-ux500/Kconfig

@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 

arch/arm/mach-vexpress/Kconfig

@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 

arch/arm/mm/proc-v7.S

@@ -230,9 +230,7 @@ __v7_setup:
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
+	teq	r5, #0x00200000			@ only present in r2p*
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register

arch/arm/plat-omap/include/plat/irqs.h

@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 

arch/arm/plat-s3c24xx/dma.c

@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 

arch/arm/plat-samsung/devs.c

@@ -1398,7 +1398,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 

arch/arm/plat-spear/time.c

@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 

arch/c6x/include/asm/processor.h

@@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
 
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)	(task_pt_regs(task)->pc)
+#define KSTK_EIP(task)	(task_pt_regs(task)->pc)
-#define	KSTK_ESP(tsk)	(task_pt_regs(task)->sp)
+#define KSTK_ESP(task)	(task_pt_regs(task)->sp)
 
 #define cpu_relax()		do { } while (0)
 

arch/mips/alchemy/common/time.c

@@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);	/* ~0.28ms */
 	clockevents_register_device(cd);
 	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 

arch/mips/ath79/dev-wmac.c

@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
-	if (soc_is_ar933x())
+	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
 	else
 		BUG();

arch/mips/configs/nlm_xlp_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_SECCOMP is not set
 CONFIG_USE_OF=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_CGROUPS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_LZMA=y

arch/mips/configs/nlm_xlr_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_KEXEC=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y

arch/mips/configs/powertv_defconfig

@@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=16

arch/mips/include/asm/mach-au1x00/gpio-au1300.h

@@ -11,6 +11,9 @@
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
+struct gpio;
+struct gpio_chip;
+
 /* with the current GPIC design, up to 128 GPIOs are possible.
  * The only implementation so far is in the Au1300, which has 75 externally
  * available GPIOs.
@@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
 	return 0;
 }
 
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
 {
 }
 

arch/mips/include/asm/page.h

@@ -39,9 +39,6 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-#  define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
 #define HPAGE_SHIFT	({BUILD_BUG(); 0; })
 #define HPAGE_SIZE	({BUILD_BUG(); 0; })
 #define HPAGE_MASK	({BUILD_BUG(); 0; })

arch/mips/kernel/smp-bmips.c

@@ -8,7 +8,6 @@
  * SMP support for BMIPS
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/mips/kernel/traps.c

@@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
 		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
 		break;
 	default:
 		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",

arch/mips/kernel/vmlinux.lds.S

@@ -69,7 +69,6 @@ SECTIONS
 	RODATA
 
 	/* writeable */
-	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 

arch/mips/mm/fault.c

@@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+						 (write ? FAULT_FLAG_WRITE : 0);
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,7 +147,11 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -153,12 +160,27 @@ good_area:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
+		if (fault & VM_FAULT_MAJOR) {
-		tsk->maj_flt++;
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
-	} else {
+						  regs, address);
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+			tsk->maj_flt++;
-		tsk->min_flt++;
+		} else {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+						  regs, address);
+			tsk->min_flt++;
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 
 	up_read(&mm->mmap_sem);

arch/mips/pci/pci.c

@@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
-	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
 	if (pci_probe_only && dev &&
@@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 		pcibios_fixup_device_resources(dev, bus);
 	}
 
-	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+	list_for_each_entry(dev, &bus->devices, bus_list) {
-		dev = pci_dev_b(ln);
-
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}

arch/mips/pmc-sierra/yosemite/ht-irq.c

@@ -35,16 +35,6 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-	}
-
 	/*
 	 * PLX and SPKT related changes go here
 	 */

arch/mips/txx9/generic/7segled.c

@@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
 			break;
 		}
 		dev->id = i;
-		dev->dev = &tx_7segled_subsys;
+		dev->bus = &tx_7segled_subsys;
 		error = device_register(dev);
 		if (!error) {
 			device_create_file(dev, &dev_attr_ascii);

arch/x86/ia32/ia32_aout.c

@@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 
@@ -410,13 +417,6 @@ beyond_if:
 
 	set_brk(current->mm->start_brk, current->mm->brk);
 
-	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) {
-		/* Someone check-me: is this error path enough? */
-		send_sig(SIGKILL, current, 0);
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
 	/* start thread */

arch/x86/lib/delay.c

@@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops)
 }
 
 /* TSC based delay: */
-static void delay_tsc(unsigned long loops)
+static void delay_tsc(unsigned long __loops)
 {
-	unsigned long bclock, now;
+	u32 bclock, now, loops = __loops;
 	int cpu;
 
 	preempt_disable();

arch/x86/mm/hugetlbpage.c

@@ -333,13 +333,15 @@ try_again:
 		 * Lookup failure means no vma is above this address,
 		 * i.e. return with success:
 		 */
-		if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
+		vma = find_vma(mm, addr);
+		if (!vma)
 			return addr;
 
 		/*
 		 * new region fits between prev_vma->vm_end and
 		 * vma->vm_start, use it:
 		 */
+		prev_vma = vma->vm_prev;
 		if (addr + len <= vma->vm_start &&
 		            (!prev_vma || (addr >= prev_vma->vm_end))) {
 			/* remember the address as a hint for next time */

arch/x86/pci/acpi.c

@@ -60,6 +60,16 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+	{
+		.callback = set_use_crs,
+		.ident = "MSI MS-7253",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 
@@ -282,9 +292,6 @@ static void add_resources(struct pci_root_info *info)
 	int i;
 	struct resource *res, *root, *conflict;
 
-	if (!pci_use_crs)
-		return;
-
 	coalesce_windows(info, IORESOURCE_MEM);
 	coalesce_windows(info, IORESOURCE_IO);
 
@@ -336,8 +343,13 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
-	add_resources(&info);
+	if (pci_use_crs) {
-	return;
+		add_resources(&info);
+
+		return;
+	}
+
+	kfree(info.name);
 
 name_alloc_fail:
 	kfree(info.res);

drivers/block/floppy.c

@@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev)
 	bio.bi_size = size;
 	bio.bi_bdev = bdev;
 	bio.bi_sector = 0;
-	bio.bi_flags = BIO_QUIET;
+	bio.bi_flags = (1 << BIO_QUIET);
 	init_completion(&complete);
 	bio.bi_private = &complete;
 	bio.bi_end_io = floppy_rb0_complete;

drivers/gpio/gpio-ep93xx.c

@@ -378,13 +378,6 @@ static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
 	}
 	ep93xx_gpio->mmio_base = mmio;
 
-	/* Default all ports to GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK |
-			       EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-
 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
 		struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
 		struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];

drivers/gpu/drm/gma500/cdv_device.c

@@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev)
 	cdv_get_core_freq(dev);
 	gma_intel_opregion_init(dev);
 	psb_intel_init_bios(dev);
+	REG_WRITE(PORT_HOTPLUG_EN, 0);
+	REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
 	return 0;
 }
 

drivers/gpu/drm/gma500/framebuffer.c

@@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = {
 	.fb_imageblit = cfb_imageblit,
 	.fb_pan_display = psbfb_pan,
 	.fb_mmap = psbfb_mmap,
-	.fb_sync = psbfb_sync,
 	.fb_ioctl = psbfb_ioctl,
 };
 

drivers/gpu/drm/gma500/gtt.c

@@ -446,10 +446,9 @@ int psb_gtt_init(struct drm_device *dev, int resume)
 	pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
 	gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
 								>> PAGE_SHIFT;
-	/* Some CDV firmware doesn't report this currently. In which case the
+	/* CDV doesn't report this. In which case the system has 64 gtt pages */
-	   system has 64 gtt pages */
 	if (pg->gtt_start == 0 || gtt_pages == 0) {
-		dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n");
 		gtt_pages = 64;
 		pg->gtt_start = dev_priv->pge_ctl;
 	}
@@ -461,10 +460,10 @@ int psb_gtt_init(struct drm_device *dev, int resume)
 
 	if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
 		static struct resource fudge;	/* Preferably peppermint */
-		/* This can occur on CDV SDV systems. Fudge it in this case.
+		/* This can occur on CDV systems. Fudge it in this case.
 		   We really don't care what imaginary space is being allocated
 		   at this point */
-		dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n");
 		pg->gatt_start = 0x40000000;
 		pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
 		/* This is a little confusing but in fact the GTT is providing

drivers/gpu/drm/radeon/r600.c

@@ -2362,6 +2362,9 @@ void r600_semaphore_ring_emit(struct radeon_device *rdev,
 	uint64_t addr = semaphore->gpu_addr;
 	unsigned sel = emit_wait ? PACKET3_SEM_SEL_WAIT : PACKET3_SEM_SEL_SIGNAL;
 
+	if (rdev->family < CHIP_CAYMAN)
+		sel |= PACKET3_SEM_WAIT_ON_SIGNAL;
+
 	radeon_ring_write(ring, PACKET3(PACKET3_MEM_SEMAPHORE, 1));
 	radeon_ring_write(ring, addr & 0xffffffff);
 	radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);

drivers/gpu/drm/radeon/r600_blit_shaders.c

@@ -313,6 +313,10 @@ const u32 r6xx_default_state[] =
 	0x00000000, /* VGT_REUSE_OFF */
 	0x00000000, /* VGT_VTX_CNT_EN */
 
+	0xc0016900,
+	0x000000d4,
+	0x00000000, /* SX_MISC */
+
 	0xc0016900,
 	0x000002c8,
 	0x00000000, /* VGT_STRMOUT_BUFFER_EN */
@@ -625,6 +629,10 @@ const u32 r7xx_default_state[] =
 	0x00000000, /* VGT_REUSE_OFF */
 	0x00000000, /* VGT_VTX_CNT_EN */
 
+	0xc0016900,
+	0x000000d4,
+	0x00000000, /* SX_MISC */
+
 	0xc0016900,
 	0x000002c8,
 	0x00000000, /* VGT_STRMOUT_BUFFER_EN */

drivers/gpu/drm/radeon/r600d.h

@@ -831,6 +831,7 @@
 #define	PACKET3_STRMOUT_BUFFER_UPDATE			0x34
 #define	PACKET3_INDIRECT_BUFFER_MP			0x38
 #define	PACKET3_MEM_SEMAPHORE				0x39
+#              define PACKET3_SEM_WAIT_ON_SIGNAL    (0x1 << 12)
 #              define PACKET3_SEM_SEL_SIGNAL	    (0x6 << 29)
 #              define PACKET3_SEM_SEL_WAIT	    (0x7 << 29)
 #define	PACKET3_MPEG_INDEX				0x3A

drivers/gpu/drm/radeon/radeon_connectors.c

@@ -1057,7 +1057,7 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector,
 		    (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
 			return MODE_OK;
 		else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) {
-			if (ASIC_IS_DCE3(rdev)) {
+			if (0) {
 				/* HDMI 1.3+ supports max clock of 340 Mhz */
 				if (mode->clock > 340000)
 					return MODE_CLOCK_HIGH;

drivers/gpu/drm/radeon/radeon_display.c

@@ -1078,15 +1078,21 @@ static const struct drm_framebuffer_funcs radeon_fb_funcs = {
 	.create_handle = radeon_user_framebuffer_create_handle,
 };
 
-void
+int
 radeon_framebuffer_init(struct drm_device *dev,
 			struct radeon_framebuffer *rfb,
 			struct drm_mode_fb_cmd2 *mode_cmd,
 			struct drm_gem_object *obj)
 {
+	int ret;
 	rfb->obj = obj;
-	drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+	ret = drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+	if (ret) {
+		rfb->obj = NULL;
+		return ret;
+	}
 	drm_helper_mode_fill_fb_struct(&rfb->base, mode_cmd);
+	return 0;
 }
 
 static struct drm_framebuffer *
@@ -1096,6 +1102,7 @@ radeon_user_framebuffer_create(struct drm_device *dev,
 {
 	struct drm_gem_object *obj;
 	struct radeon_framebuffer *radeon_fb;
+	int ret;
 
 	obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]);
 	if (obj ==  NULL) {
@@ -1108,7 +1115,12 @@ radeon_user_framebuffer_create(struct drm_device *dev,
 	if (radeon_fb == NULL)
 		return ERR_PTR(-ENOMEM);
 
-	radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+	ret = radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+	if (ret) {
+		kfree(radeon_fb);
+		drm_gem_object_unreference_unlocked(obj);
+		return NULL;
+	}
 
 	return &radeon_fb->base;
 }

drivers/gpu/drm/radeon/radeon_encoders.c

@@ -307,8 +307,6 @@ void radeon_panel_mode_fixup(struct drm_encoder *encoder,
 bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 				    u32 pixel_clock)
 {
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *dig_connector;
@@ -326,7 +324,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 	case DRM_MODE_CONNECTOR_HDMIB:
 		if (radeon_connector->use_digital) {
 			/* HDMI 1.3 supports up to 340 Mhz over single link */
-			if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
 				if (pixel_clock > 340000)
 					return true;
 				else
@@ -348,7 +346,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 			return false;
 		else {
 			/* HDMI 1.3 supports up to 340 Mhz over single link */
-			if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
 				if (pixel_clock > 340000)
 					return true;
 				else

drivers/gpu/drm/radeon/radeon_fb.c

@@ -209,6 +209,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
 							  sizes->surface_depth);
 
 	ret = radeonfb_create_pinned_object(rfbdev, &mode_cmd, &gobj);
+	if (ret) {
+		DRM_ERROR("failed to create fbcon object %d\n", ret);
+		return ret;
+	}
+
 	rbo = gem_to_radeon_bo(gobj);
 
 	/* okay we have an object now allocate the framebuffer */
@@ -220,7 +225,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
 
 	info->par = rfbdev;
 
-	radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+	ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+	if (ret) {
+		DRM_ERROR("failed to initalise framebuffer %d\n", ret);
+		goto out_unref;
+	}
 
 	fb = &rfbdev->rfb.base;