diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 93378d507962..3b3b59314125 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -4782,6 +4782,30 @@ static bool mlxsw_sp_bridge_has_multiple_vxlans(struct net_device *br_dev)
 	return num_vxlans > 1;
 }
 
+static bool mlxsw_sp_bridge_vxlan_vlan_is_valid(struct net_device *br_dev)
+{
+	DECLARE_BITMAP(vlans, VLAN_N_VID) = {0};
+	struct net_device *dev;
+	struct list_head *iter;
+
+	netdev_for_each_lower_dev(br_dev, dev, iter) {
+		u16 pvid;
+		int err;
+
+		if (!netif_is_vxlan(dev))
+			continue;
+
+		err = mlxsw_sp_vxlan_mapped_vid(dev, &pvid);
+		if (err || !pvid)
+			continue;
+
+		if (test_and_set_bit(pvid, vlans))
+			return false;
+	}
+
+	return true;
+}
+
 static bool mlxsw_sp_bridge_vxlan_is_valid(struct net_device *br_dev,
 					   struct netlink_ext_ack *extack)
 {
@@ -4790,13 +4814,15 @@ static bool mlxsw_sp_bridge_vxlan_is_valid(struct net_device *br_dev,
 		return false;
 	}
 
-	if (br_vlan_enabled(br_dev)) {
-		NL_SET_ERR_MSG_MOD(extack, "VLAN filtering can not be enabled on a bridge with a VxLAN device");
+	if (!br_vlan_enabled(br_dev) &&
+	    mlxsw_sp_bridge_has_multiple_vxlans(br_dev)) {
+		NL_SET_ERR_MSG_MOD(extack, "Multiple VxLAN devices are not supported in a VLAN-unaware bridge");
 		return false;
 	}
 
-	if (mlxsw_sp_bridge_has_multiple_vxlans(br_dev)) {
-		NL_SET_ERR_MSG_MOD(extack, "Multiple VxLAN devices are not supported in a VLAN-unaware bridge");
+	if (br_vlan_enabled(br_dev) &&
+	    !mlxsw_sp_bridge_vxlan_vlan_is_valid(br_dev)) {
+		NL_SET_ERR_MSG_MOD(extack, "Multiple VxLAN devices cannot have the same VLAN as PVID and egress untagged");
 		return false;
 	}
 
@@ -5171,10 +5197,21 @@ static int mlxsw_sp_netdevice_vxlan_event(struct mlxsw_sp *mlxsw_sp,
 		if (cu_info->linking) {
 			if (!netif_running(dev))
 				return 0;
+			/* When the bridge is VLAN-aware, the VNI of the VxLAN
+			 * device needs to be mapped to a VLAN, but at this
+			 * point no VLANs are configured on the VxLAN device
+			 */
+			if (br_vlan_enabled(upper_dev))
+				return 0;
 			return mlxsw_sp_bridge_vxlan_join(mlxsw_sp, upper_dev,
-							  dev, extack);
+							  dev, 0, extack);
 		} else {
-			mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, upper_dev, dev);
+			/* VLANs were already flushed, which triggered the
+			 * necessary cleanup
+			 */
+			if (br_vlan_enabled(upper_dev))
+				return 0;
+			mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, dev);
 		}
 		break;
 	case NETDEV_PRE_UP:
@@ -5185,7 +5222,7 @@ static int mlxsw_sp_netdevice_vxlan_event(struct mlxsw_sp *mlxsw_sp,
 			return 0;
 		if (!mlxsw_sp_lower_get(upper_dev))
 			return 0;
-		return mlxsw_sp_bridge_vxlan_join(mlxsw_sp, upper_dev, dev,
+		return mlxsw_sp_bridge_vxlan_join(mlxsw_sp, upper_dev, dev, 0,
 						  extack);
 	case NETDEV_DOWN:
 		upper_dev = netdev_master_upper_dev_get(dev);
@@ -5195,7 +5232,7 @@ static int mlxsw_sp_netdevice_vxlan_event(struct mlxsw_sp *mlxsw_sp,
 			return 0;
 		if (!mlxsw_sp_lower_get(upper_dev))
 			return 0;
-		mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, upper_dev, dev);
+		mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, dev);
 		break;
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
index 244972bf8b0a..a3e564e0da39 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h
@@ -8,6 +8,7 @@
 #include <linux/netdevice.h>
 #include <linux/rhashtable.h>
 #include <linux/bitops.h>
+#include <linux/if_bridge.h>
 #include <linux/if_vlan.h>
 #include <linux/list.h>
 #include <linux/dcbnl.h>
@@ -261,6 +262,26 @@ static inline bool mlxsw_sp_bridge_has_vxlan(struct net_device *br_dev)
 	return !!mlxsw_sp_bridge_vxlan_dev_find(br_dev);
 }
 
+static inline int
+mlxsw_sp_vxlan_mapped_vid(const struct net_device *vxlan_dev, u16 *p_vid)
+{
+	struct bridge_vlan_info vinfo;
+	u16 vid = 0;
+	int err;
+
+	err = br_vlan_get_pvid(vxlan_dev, &vid);
+	if (err || !vid)
+		goto out;
+
+	err = br_vlan_get_info(vxlan_dev, vid, &vinfo);
+	if (err || !(vinfo.flags & BRIDGE_VLAN_INFO_UNTAGGED))
+		vid = 0;
+
+out:
+	*p_vid = vid;
+	return err;
+}
+
 static inline bool
 mlxsw_sp_port_is_pause_en(const struct mlxsw_sp_port *mlxsw_sp_port)
 {
@@ -358,10 +379,9 @@ bool mlxsw_sp_bridge_device_is_offloaded(const struct mlxsw_sp *mlxsw_sp,
 					 const struct net_device *br_dev);
 int mlxsw_sp_bridge_vxlan_join(struct mlxsw_sp *mlxsw_sp,
 			       const struct net_device *br_dev,
-			       const struct net_device *vxlan_dev,
+			       const struct net_device *vxlan_dev, u16 vid,
 			       struct netlink_ext_ack *extack);
 void mlxsw_sp_bridge_vxlan_leave(struct mlxsw_sp *mlxsw_sp,
-				 const struct net_device *br_dev,
 				 const struct net_device *vxlan_dev);
 
 /* spectrum.c */
@@ -753,6 +773,8 @@ u16 mlxsw_sp_fid_8021q_vid(const struct mlxsw_sp_fid *fid);
 struct mlxsw_sp_fid *mlxsw_sp_fid_8021q_get(struct mlxsw_sp *mlxsw_sp, u16 vid);
 struct mlxsw_sp_fid *mlxsw_sp_fid_8021d_get(struct mlxsw_sp *mlxsw_sp,
 					    int br_ifindex);
+struct mlxsw_sp_fid *mlxsw_sp_fid_8021q_lookup(struct mlxsw_sp *mlxsw_sp,
+					       u16 vid);
 struct mlxsw_sp_fid *mlxsw_sp_fid_8021d_lookup(struct mlxsw_sp *mlxsw_sp,
 					       int br_ifindex);
 struct mlxsw_sp_fid *mlxsw_sp_fid_rfid_get(struct mlxsw_sp *mlxsw_sp,
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c
index 6830e79aed93..f9af68230455 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c
@@ -1068,6 +1068,12 @@ struct mlxsw_sp_fid *mlxsw_sp_fid_8021d_get(struct mlxsw_sp *mlxsw_sp,
 	return mlxsw_sp_fid_get(mlxsw_sp, MLXSW_SP_FID_TYPE_8021D, &br_ifindex);
 }
 
+struct mlxsw_sp_fid *mlxsw_sp_fid_8021q_lookup(struct mlxsw_sp *mlxsw_sp,
+					       u16 vid)
+{
+	return mlxsw_sp_fid_lookup(mlxsw_sp, MLXSW_SP_FID_TYPE_8021Q, &vid);
+}
+
 struct mlxsw_sp_fid *mlxsw_sp_fid_8021d_lookup(struct mlxsw_sp *mlxsw_sp,
 					       int br_ifindex)
 {
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 3c2428404b2e..7c38231bbd89 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -85,10 +85,8 @@ struct mlxsw_sp_bridge_ops {
 			   struct mlxsw_sp_bridge_port *bridge_port,
 			   struct mlxsw_sp_port *mlxsw_sp_port);
 	int (*vxlan_join)(struct mlxsw_sp_bridge_device *bridge_device,
-			  const struct net_device *vxlan_dev,
+			  const struct net_device *vxlan_dev, u16 vid,
 			  struct netlink_ext_ack *extack);
-	void (*vxlan_leave)(struct mlxsw_sp_bridge_device *bridge_device,
-			    const struct net_device *vxlan_dev);
 	struct mlxsw_sp_fid *
 		(*fid_get)(struct mlxsw_sp_bridge_device *bridge_device,
 			   u16 vid);
@@ -2005,17 +2003,79 @@ mlxsw_sp_bridge_8021q_port_leave(struct mlxsw_sp_bridge_device *bridge_device,
 
 static int
 mlxsw_sp_bridge_8021q_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
-				 const struct net_device *vxlan_dev,
+				 const struct net_device *vxlan_dev, u16 vid,
 				 struct netlink_ext_ack *extack)
 {
-	WARN_ON(1);
-	return -EINVAL;
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_device->dev);
+	struct vxlan_dev *vxlan = netdev_priv(vxlan_dev);
+	struct mlxsw_sp_nve_params params = {
+		.type = MLXSW_SP_NVE_TYPE_VXLAN,
+		.vni = vxlan->cfg.vni,
+		.dev = vxlan_dev,
+	};
+	struct mlxsw_sp_fid *fid;
+	int err;
+
+	/* If the VLAN is 0, we need to find the VLAN that is configured as
+	 * PVID and egress untagged on the bridge port of the VxLAN device.
+	 * It is possible no such VLAN exists
+	 */
+	if (!vid) {
+		err = mlxsw_sp_vxlan_mapped_vid(vxlan_dev, &vid);
+		if (err || !vid)
+			return err;
+	}
+
+	/* If no other port is member in the VLAN, then the FID does not exist.
+	 * NVE will be enabled on the FID once a port joins the VLAN
+	 */
+	fid = mlxsw_sp_fid_8021q_lookup(mlxsw_sp, vid);
+	if (!fid)
+		return 0;
+
+	if (mlxsw_sp_fid_vni_is_set(fid)) {
+		err = -EINVAL;
+		goto err_vni_exists;
+	}
+
+	err = mlxsw_sp_nve_fid_enable(mlxsw_sp, fid, &params, extack);
+	if (err)
+		goto err_nve_fid_enable;
+
+	/* The tunnel port does not hold a reference on the FID. Only
+	 * local ports and the router port
+	 */
+	mlxsw_sp_fid_put(fid);
+
+	return 0;
+
+err_nve_fid_enable:
+err_vni_exists:
+	mlxsw_sp_fid_put(fid);
+	return err;
 }
 
-static void
-mlxsw_sp_bridge_8021q_vxlan_leave(struct mlxsw_sp_bridge_device *bridge_device,
-				  const struct net_device *vxlan_dev)
+static struct net_device *
+mlxsw_sp_bridge_8021q_vxlan_dev_find(struct net_device *br_dev, u16 vid)
 {
+	struct net_device *dev;
+	struct list_head *iter;
+
+	netdev_for_each_lower_dev(br_dev, dev, iter) {
+		u16 pvid;
+		int err;
+
+		if (!netif_is_vxlan(dev))
+			continue;
+
+		err = mlxsw_sp_vxlan_mapped_vid(dev, &pvid);
+		if (err || pvid != vid)
+			continue;
+
+		return dev;
+	}
+
+	return NULL;
 }
 
 static struct mlxsw_sp_fid *
@@ -2023,16 +2083,47 @@ mlxsw_sp_bridge_8021q_fid_get(struct mlxsw_sp_bridge_device *bridge_device,
 			      u16 vid)
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_device->dev);
+	struct net_device *vxlan_dev;
+	struct mlxsw_sp_fid *fid;
+	int err;
 
-	return mlxsw_sp_fid_8021q_get(mlxsw_sp, vid);
+	fid = mlxsw_sp_fid_8021q_get(mlxsw_sp, vid);
+	if (IS_ERR(fid))
+		return fid;
+
+	if (mlxsw_sp_fid_vni_is_set(fid))
+		return fid;
+
+	/* Find the VxLAN device that has the specified VLAN configured as
+	 * PVID and egress untagged. There can be at most one such device
+	 */
+	vxlan_dev = mlxsw_sp_bridge_8021q_vxlan_dev_find(bridge_device->dev,
+							 vid);
+	if (!vxlan_dev)
+		return fid;
+
+	if (!netif_running(vxlan_dev))
+		return fid;
+
+	err = mlxsw_sp_bridge_8021q_vxlan_join(bridge_device, vxlan_dev, vid,
+					       NULL);
+	if (err)
+		goto err_vxlan_join;
+
+	return fid;
+
+err_vxlan_join:
+	mlxsw_sp_fid_put(fid);
+	return ERR_PTR(err);
 }
 
 static struct mlxsw_sp_fid *
 mlxsw_sp_bridge_8021q_fid_lookup(struct mlxsw_sp_bridge_device *bridge_device,
 				 u16 vid)
 {
-	WARN_ON(1);
-	return NULL;
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_device->dev);
+
+	return mlxsw_sp_fid_8021q_lookup(mlxsw_sp, vid);
 }
 
 static u16
@@ -2046,7 +2137,6 @@ static const struct mlxsw_sp_bridge_ops mlxsw_sp_bridge_8021q_ops = {
 	.port_join	= mlxsw_sp_bridge_8021q_port_join,
 	.port_leave	= mlxsw_sp_bridge_8021q_port_leave,
 	.vxlan_join	= mlxsw_sp_bridge_8021q_vxlan_join,
-	.vxlan_leave	= mlxsw_sp_bridge_8021q_vxlan_leave,
 	.fid_get	= mlxsw_sp_bridge_8021q_fid_get,
 	.fid_lookup	= mlxsw_sp_bridge_8021q_fid_lookup,
 	.fid_vid	= mlxsw_sp_bridge_8021q_fid_vid,
@@ -2115,7 +2205,7 @@ mlxsw_sp_bridge_8021d_port_leave(struct mlxsw_sp_bridge_device *bridge_device,
 
 static int
 mlxsw_sp_bridge_8021d_vxlan_join(struct mlxsw_sp_bridge_device *bridge_device,
-				 const struct net_device *vxlan_dev,
+				 const struct net_device *vxlan_dev, u16 vid,
 				 struct netlink_ext_ack *extack)
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_device->dev);
@@ -2151,26 +2241,6 @@ err_nve_fid_enable:
 	return err;
 }
 
-static void
-mlxsw_sp_bridge_8021d_vxlan_leave(struct mlxsw_sp_bridge_device *bridge_device,
-				  const struct net_device *vxlan_dev)
-{
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_device->dev);
-	struct mlxsw_sp_fid *fid;
-
-	fid = mlxsw_sp_fid_8021d_lookup(mlxsw_sp, bridge_device->dev->ifindex);
-	if (WARN_ON(!fid))
-		return;
-
-	/* If the VxLAN device is down, then the FID does not have a VNI */
-	if (!mlxsw_sp_fid_vni_is_set(fid))
-		goto out;
-
-	mlxsw_sp_nve_fid_disable(mlxsw_sp, fid);
-out:
-	mlxsw_sp_fid_put(fid);
-}
-
 static struct mlxsw_sp_fid *
 mlxsw_sp_bridge_8021d_fid_get(struct mlxsw_sp_bridge_device *bridge_device,
 			      u16 vid)
@@ -2194,7 +2264,8 @@ mlxsw_sp_bridge_8021d_fid_get(struct mlxsw_sp_bridge_device *bridge_device,
 	if (!netif_running(vxlan_dev))
 		return fid;
 
-	err = mlxsw_sp_bridge_8021d_vxlan_join(bridge_device, vxlan_dev, NULL);
+	err = mlxsw_sp_bridge_8021d_vxlan_join(bridge_device, vxlan_dev, 0,
+					       NULL);
 	if (err)
 		goto err_vxlan_join;
 
@@ -2229,7 +2300,6 @@ static const struct mlxsw_sp_bridge_ops mlxsw_sp_bridge_8021d_ops = {
 	.port_join	= mlxsw_sp_bridge_8021d_port_join,
 	.port_leave	= mlxsw_sp_bridge_8021d_port_leave,
 	.vxlan_join	= mlxsw_sp_bridge_8021d_vxlan_join,
-	.vxlan_leave	= mlxsw_sp_bridge_8021d_vxlan_leave,
 	.fid_get	= mlxsw_sp_bridge_8021d_fid_get,
 	.fid_lookup	= mlxsw_sp_bridge_8021d_fid_lookup,
 	.fid_vid	= mlxsw_sp_bridge_8021d_fid_vid,
@@ -2284,7 +2354,7 @@ void mlxsw_sp_port_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_port,
 
 int mlxsw_sp_bridge_vxlan_join(struct mlxsw_sp *mlxsw_sp,
 			       const struct net_device *br_dev,
-			       const struct net_device *vxlan_dev,
+			       const struct net_device *vxlan_dev, u16 vid,
 			       struct netlink_ext_ack *extack)
 {
 	struct mlxsw_sp_bridge_device *bridge_device;
@@ -2293,20 +2363,23 @@ int mlxsw_sp_bridge_vxlan_join(struct mlxsw_sp *mlxsw_sp,
 	if (WARN_ON(!bridge_device))
 		return -EINVAL;
 
-	return bridge_device->ops->vxlan_join(bridge_device, vxlan_dev, extack);
+	return bridge_device->ops->vxlan_join(bridge_device, vxlan_dev, vid,
+					      extack);
 }
 
 void mlxsw_sp_bridge_vxlan_leave(struct mlxsw_sp *mlxsw_sp,
-				 const struct net_device *br_dev,
 				 const struct net_device *vxlan_dev)
 {
-	struct mlxsw_sp_bridge_device *bridge_device;
+	struct vxlan_dev *vxlan = netdev_priv(vxlan_dev);
+	struct mlxsw_sp_fid *fid;
 
-	bridge_device = mlxsw_sp_bridge_device_find(mlxsw_sp->bridge, br_dev);
-	if (WARN_ON(!bridge_device))
+	/* If the VxLAN device is down, then the FID does not have a VNI */
+	fid = mlxsw_sp_fid_lookup_by_vni(mlxsw_sp, vxlan->cfg.vni);
+	if (!fid)
 		return;
 
-	bridge_device->ops->vxlan_leave(bridge_device, vxlan_dev);
+	mlxsw_sp_nve_fid_disable(mlxsw_sp, fid);
+	mlxsw_sp_fid_put(fid);
 }
 
 static void
@@ -3117,22 +3190,256 @@ static struct notifier_block mlxsw_sp_switchdev_notifier = {
 	.notifier_call = mlxsw_sp_switchdev_event,
 };
 
+static int
+mlxsw_sp_switchdev_vxlan_vlan_add(struct mlxsw_sp *mlxsw_sp,
+				  struct mlxsw_sp_bridge_device *bridge_device,
+				  const struct net_device *vxlan_dev, u16 vid,
+				  bool flag_untagged, bool flag_pvid,
+				  struct switchdev_trans *trans)
+{
+	struct vxlan_dev *vxlan = netdev_priv(vxlan_dev);
+	__be32 vni = vxlan->cfg.vni;
+	struct mlxsw_sp_fid *fid;
+	u16 old_vid;
+	int err;
+
+	/* We cannot have the same VLAN as PVID and egress untagged on multiple
+	 * VxLAN devices. Note that we get this notification before the VLAN is
+	 * actually added to the bridge's database, so it is not possible for
+	 * the lookup function to return 'vxlan_dev'
+	 */
+	if (flag_untagged && flag_pvid &&
+	    mlxsw_sp_bridge_8021q_vxlan_dev_find(bridge_device->dev, vid))
+		return -EINVAL;
+
+	if (switchdev_trans_ph_prepare(trans))
+		return 0;
+
+	if (!netif_running(vxlan_dev))
+		return 0;
+
+	/* First case: FID is not associated with this VNI, but the new VLAN
+	 * is both PVID and egress untagged. Need to enable NVE on the FID, if
+	 * it exists
+	 */
+	fid = mlxsw_sp_fid_lookup_by_vni(mlxsw_sp, vni);
+	if (!fid) {
+		if (!flag_untagged || !flag_pvid)
+			return 0;
+		return mlxsw_sp_bridge_8021q_vxlan_join(bridge_device,
+							vxlan_dev, vid, NULL);
+	}
+
+	/* Second case: FID is associated with the VNI and the VLAN associated
+	 * with the FID is the same as the notified VLAN. This means the flags
+	 * (PVID / egress untagged) were toggled and that NVE should be
+	 * disabled on the FID
+	 */
+	old_vid = mlxsw_sp_fid_8021q_vid(fid);
+	if (vid == old_vid) {
+		if (WARN_ON(flag_untagged && flag_pvid)) {
+			mlxsw_sp_fid_put(fid);
+			return -EINVAL;
+		}
+		mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, vxlan_dev);
+		mlxsw_sp_fid_put(fid);
+		return 0;
+	}
+
+	/* Third case: A new VLAN was configured on the VxLAN device, but this
+	 * VLAN is not PVID, so there is nothing to do.
+	 */
+	if (!flag_pvid) {
+		mlxsw_sp_fid_put(fid);
+		return 0;
+	}
+
+	/* Fourth case: Thew new VLAN is PVID, which means the VLAN currently
+	 * mapped to the VNI should be unmapped
+	 */
+	mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, vxlan_dev);
+	mlxsw_sp_fid_put(fid);
+
+	/* Fifth case: The new VLAN is also egress untagged, which means the
+	 * VLAN needs to be mapped to the VNI
+	 */
+	if (!flag_untagged)
+		return 0;
+
+	err = mlxsw_sp_bridge_8021q_vxlan_join(bridge_device, vxlan_dev, vid,
+					       NULL);
+	if (err)
+		goto err_vxlan_join;
+
+	return 0;
+
+err_vxlan_join:
+	mlxsw_sp_bridge_8021q_vxlan_join(bridge_device, vxlan_dev, old_vid,
+					 NULL);
+	return err;
+}
+
+static void
+mlxsw_sp_switchdev_vxlan_vlan_del(struct mlxsw_sp *mlxsw_sp,
+				  struct mlxsw_sp_bridge_device *bridge_device,
+				  const struct net_device *vxlan_dev, u16 vid)
+{
+	struct vxlan_dev *vxlan = netdev_priv(vxlan_dev);
+	__be32 vni = vxlan->cfg.vni;
+	struct mlxsw_sp_fid *fid;
+
+	if (!netif_running(vxlan_dev))
+		return;
+
+	fid = mlxsw_sp_fid_lookup_by_vni(mlxsw_sp, vni);
+	if (!fid)
+		return;
+
+	/* A different VLAN than the one mapped to the VNI is deleted */
+	if (mlxsw_sp_fid_8021q_vid(fid) != vid)
+		goto out;
+
+	mlxsw_sp_bridge_vxlan_leave(mlxsw_sp, vxlan_dev);
+
+out:
+	mlxsw_sp_fid_put(fid);
+}
+
+static int
+mlxsw_sp_switchdev_vxlan_vlans_add(struct net_device *vxlan_dev,
+				   struct switchdev_notifier_port_obj_info *
+				   port_obj_info)
+{
+	struct switchdev_obj_port_vlan *vlan =
+		SWITCHDEV_OBJ_PORT_VLAN(port_obj_info->obj);
+	bool flag_untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	bool flag_pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+	struct switchdev_trans *trans = port_obj_info->trans;
+	struct mlxsw_sp_bridge_device *bridge_device;
+	struct mlxsw_sp *mlxsw_sp;
+	struct net_device *br_dev;
+	u16 vid;
+
+	br_dev = netdev_master_upper_dev_get(vxlan_dev);
+	if (!br_dev)
+		return 0;
+
+	mlxsw_sp = mlxsw_sp_lower_get(br_dev);
+	if (!mlxsw_sp)
+		return 0;
+
+	port_obj_info->handled = true;
+
+	bridge_device = mlxsw_sp_bridge_device_find(mlxsw_sp->bridge, br_dev);
+	if (!bridge_device)
+		return -EINVAL;
+
+	if (!bridge_device->vlan_enabled)
+		return 0;
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+		int err;
+
+		err = mlxsw_sp_switchdev_vxlan_vlan_add(mlxsw_sp, bridge_device,
+							vxlan_dev, vid,
+							flag_untagged,
+							flag_pvid, trans);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static void
+mlxsw_sp_switchdev_vxlan_vlans_del(struct net_device *vxlan_dev,
+				   struct switchdev_notifier_port_obj_info *
+				   port_obj_info)
+{
+	struct switchdev_obj_port_vlan *vlan =
+		SWITCHDEV_OBJ_PORT_VLAN(port_obj_info->obj);
+	struct mlxsw_sp_bridge_device *bridge_device;
+	struct mlxsw_sp *mlxsw_sp;
+	struct net_device *br_dev;
+	u16 vid;
+
+	br_dev = netdev_master_upper_dev_get(vxlan_dev);
+	if (!br_dev)
+		return;
+
+	mlxsw_sp = mlxsw_sp_lower_get(br_dev);
+	if (!mlxsw_sp)
+		return;
+
+	port_obj_info->handled = true;
+
+	bridge_device = mlxsw_sp_bridge_device_find(mlxsw_sp->bridge, br_dev);
+	if (!bridge_device)
+		return;
+
+	if (!bridge_device->vlan_enabled)
+		return;
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++)
+		mlxsw_sp_switchdev_vxlan_vlan_del(mlxsw_sp, bridge_device,
+						  vxlan_dev, vid);
+}
+
+static int
+mlxsw_sp_switchdev_handle_vxlan_obj_add(struct net_device *vxlan_dev,
+					struct switchdev_notifier_port_obj_info *
+					port_obj_info)
+{
+	int err = 0;
+
+	switch (port_obj_info->obj->id) {
+	case SWITCHDEV_OBJ_ID_PORT_VLAN:
+		err = mlxsw_sp_switchdev_vxlan_vlans_add(vxlan_dev,
+							 port_obj_info);
+		break;
+	default:
+		break;
+	}
+
+	return err;
+}
+
+static void
+mlxsw_sp_switchdev_handle_vxlan_obj_del(struct net_device *vxlan_dev,
+					struct switchdev_notifier_port_obj_info *
+					port_obj_info)
+{
+	switch (port_obj_info->obj->id) {
+	case SWITCHDEV_OBJ_ID_PORT_VLAN:
+		mlxsw_sp_switchdev_vxlan_vlans_del(vxlan_dev, port_obj_info);
+		break;
+	default:
+		break;
+	}
+}
+
 static int mlxsw_sp_switchdev_blocking_event(struct notifier_block *unused,
 					     unsigned long event, void *ptr)
 {
 	struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
-	int err;
+	int err = 0;
 
 	switch (event) {
 	case SWITCHDEV_PORT_OBJ_ADD:
-		err = switchdev_handle_port_obj_add(dev, ptr,
-						    mlxsw_sp_port_dev_check,
-						    mlxsw_sp_port_obj_add);
+		if (netif_is_vxlan(dev))
+			err = mlxsw_sp_switchdev_handle_vxlan_obj_add(dev, ptr);
+		else
+			err = switchdev_handle_port_obj_add(dev, ptr,
+							mlxsw_sp_port_dev_check,
+							mlxsw_sp_port_obj_add);
 		return notifier_from_errno(err);
 	case SWITCHDEV_PORT_OBJ_DEL:
-		err = switchdev_handle_port_obj_del(dev, ptr,
-						    mlxsw_sp_port_dev_check,
-						    mlxsw_sp_port_obj_del);
+		if (netif_is_vxlan(dev))
+			mlxsw_sp_switchdev_handle_vxlan_obj_del(dev, ptr);
+		else
+			err = switchdev_handle_port_obj_del(dev, ptr,
+							mlxsw_sp_port_dev_check,
+							mlxsw_sp_port_obj_del);
 		return notifier_from_errno(err);
 	}
 
diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
index b21838b51220..48f50d7ac624 100644
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -1217,9 +1217,13 @@ void br_vlan_get_stats(const struct net_bridge_vlan *v,
 int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid)
 {
 	struct net_bridge_vlan_group *vg;
+	struct net_bridge_port *p;
 
 	ASSERT_RTNL();
-	if (netif_is_bridge_master(dev))
+	p = br_port_get_check_rtnl(dev);
+	if (p)
+		vg = nbp_vlan_group(p);
+	else if (netif_is_bridge_master(dev))
 		vg = br_vlan_group(netdev_priv(dev));
 	else
 		return -EINVAL;
diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
index ffa79b738f2a..90b4998a3b70 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
@@ -6,7 +6,8 @@
 
 lib_dir=$(dirname $0)/../../../net/forwarding
 
-ALL_TESTS="sanitization_test offload_indication_test"
+ALL_TESTS="sanitization_test offload_indication_test \
+	sanitization_vlan_aware_test offload_indication_vlan_aware_test"
 NUM_NETIFS=2
 source $lib_dir/lib.sh
 
@@ -81,7 +82,7 @@ sanitization_single_dev_vlan_aware_test()
 	ip link add name vxlan0 up type vxlan id 10 nolearning noudpcsum \
 		ttl 20 tos inherit local 198.51.100.1 dstport 4789
 
-	sanitization_single_dev_test_fail
+	sanitization_single_dev_test_pass
 
 	ip link del dev vxlan0
 	ip link del dev br0
@@ -654,6 +655,207 @@ offload_indication_test()
 	offload_indication_setup_destroy
 }
 
+sanitization_vlan_aware_test()
+{
+	RET=0
+
+	ip link add dev br0 type bridge mcast_snooping 0 vlan_filtering 1
+
+	ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+
+	ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+
+	# Test that when each VNI is mapped to a different VLAN we can enslave
+	# a port to the bridge
+	bridge vlan add vid 10 dev vxlan10 pvid untagged
+	bridge vlan add vid 20 dev vxlan20 pvid untagged
+
+	ip link set dev $swp1 master br0
+	check_err $?
+
+	log_test "vlan-aware - enslavement to vlan-aware bridge"
+
+	# Try to map both VNIs to the same VLAN and make sure configuration
+	# fails
+	RET=0
+
+	bridge vlan add vid 10 dev vxlan20 pvid untagged &> /dev/null
+	check_fail $?
+
+	log_test "vlan-aware - two vnis mapped to the same vlan"
+
+	# Test that enslavement of a port to a bridge fails when two VNIs
+	# are mapped to the same VLAN
+	RET=0
+
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vxlan20 pvid untagged
+	bridge vlan add vid 10 dev vxlan20 pvid untagged
+
+	ip link set dev $swp1 master br0 &> /dev/null
+	check_fail $?
+
+	log_test "vlan-aware - failed enslavement to vlan-aware bridge"
+
+	ip link del dev vxlan20
+	ip link del dev vxlan10
+	ip link del dev br0
+}
+
+offload_indication_vlan_aware_setup_create()
+{
+	# Create a simple setup with two VxLAN devices and a single VLAN-aware
+	# bridge
+	ip link add name br0 up type bridge mcast_snooping 0 vlan_filtering 1 \
+		vlan_default_pvid 0
+
+	ip link set dev $swp1 master br0
+
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip address add 198.51.100.1/32 dev lo
+
+	ip link add name vxlan10 up master br0 type vxlan id 10 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+	ip link add name vxlan20 up master br0 type vxlan id 20 nolearning \
+		noudpcsum ttl 20 tos inherit local 198.51.100.1 dstport 4789
+
+	bridge vlan add vid 10 dev vxlan10 pvid untagged
+	bridge vlan add vid 20 dev vxlan20 pvid untagged
+}
+
+offload_indication_vlan_aware_setup_destroy()
+{
+	bridge vlan del vid 20 dev vxlan20
+	bridge vlan del vid 10 dev vxlan10
+
+	ip link del dev vxlan20
+	ip link del dev vxlan10
+
+	ip address del 198.51.100.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br0
+}
+
+offload_indication_vlan_aware_fdb_test()
+{
+	RET=0
+
+	log_info "vxlan entry offload indication - vlan-aware"
+
+	bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self master static \
+		dst 198.51.100.2 vlan 10
+
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_err $?
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_err $?
+
+	log_test "vxlan entry offload indication - initial state"
+
+	# Remove FDB entry from the bridge driver and check that corresponding
+	# entry in the VxLAN driver is not marked as offloaded
+	RET=0
+
+	bridge fdb del de:ad:be:ef:13:37 dev vxlan10 master vlan 10
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_fail $?
+
+	log_test "vxlan entry offload indication - after removal from bridge"
+
+	# Add the FDB entry back to the bridge driver and make sure it is
+	# marked as offloaded in both drivers
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev vxlan10 master static vlan 10
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_err $?
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_err $?
+
+	log_test "vxlan entry offload indication - after re-add to bridge"
+
+	# Remove FDB entry from the VxLAN driver and check that corresponding
+	# entry in the bridge driver is not marked as offloaded
+	RET=0
+
+	bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_fail $?
+
+	log_test "vxlan entry offload indication - after removal from vxlan"
+
+	# Add the FDB entry back to the VxLAN driver and make sure it is
+	# marked as offloaded in both drivers
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev vxlan10 self dst 198.51.100.2
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep self \
+		| grep -q offload
+	check_err $?
+	bridge fdb show brport vxlan10 | grep de:ad:be:ef:13:37 | grep -v self \
+		| grep -q offload
+	check_err $?
+
+	log_test "vxlan entry offload indication - after re-add to vxlan"
+
+	bridge fdb del de:ad:be:ef:13:37 dev vxlan10 self master vlan 10
+}
+
+offload_indication_vlan_aware_decap_route_test()
+{
+	RET=0
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_err $?
+
+	# Toggle PVID flag on one VxLAN device and make sure route is still
+	# marked as offloaded
+	bridge vlan add vid 10 dev vxlan10 untagged
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_err $?
+
+	# Toggle PVID flag on second VxLAN device and make sure route is no
+	# longer marked as offloaded
+	bridge vlan add vid 20 dev vxlan20 untagged
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_fail $?
+
+	# Toggle PVID flag back and make sure route is marked as offloaded
+	bridge vlan add vid 10 dev vxlan10 pvid untagged
+	bridge vlan add vid 20 dev vxlan20 pvid untagged
+
+	ip route show table local | grep 198.51.100.1 | grep -q offload
+	check_err $?
+
+	log_test "vxlan decap route - vni map/unmap"
+}
+
+offload_indication_vlan_aware_test()
+{
+	offload_indication_vlan_aware_setup_create
+	offload_indication_vlan_aware_fdb_test
+	offload_indication_vlan_aware_decap_route_test
+	offload_indication_vlan_aware_setup_destroy
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh
new file mode 100755
index 000000000000..bac2e568d22c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh
@@ -0,0 +1,790 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |  + $h1.10             |                          |  + $h2.10              |
+# |  | 192.0.2.1/28       |                          |  | 192.0.2.2/28        |
+# |  |                    |                          |  |                     |
+# |  | + $h1.20           |                          |  | + $h2.20            |
+# |  \ | 198.51.100.1/24  |                          |  \ | 198.51.100.2/24   |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | |  + vx10 (vxlan)                        + vx20 (vxlan)                 | |
+# | |    local 192.0.2.17                      local 192.0.2.17             | |
+# | |    remote 192.0.2.34 192.0.2.50          remote 192.0.2.34 192.0.2.50 | |
+# | |    id 1000 dstport $VXPORT               id 2000 dstport $VXPORT      | |
+# | |    vid 10 pvid untagged                  vid 20 pvid untagged         | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                  BR2 (802.1q) | |   | |                  BR2 (802.1q) | |
+# | |  + vx10 (vxlan)               | |   | |  + vx10 (vxlan)               | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |    vid 10 pvid untagged       | |   | |    vid 10 pvid untagged       | |
+# | |                               | |   | |                               | |
+# | |  + vx20 (vxlan)               | |   | |  + vx20 (vxlan)               | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 2000 dstport $VXPORT    | |   | |    id 2000 dstport $VXPORT    | |
+# | |    vid 20 pvid untagged       | |   | |    vid 20 pvid untagged       | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 10                     | |   | |  | vid 10                     | |
+# | |  | vid 20                     | |   | |  | vid 20                     | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  + w2 (veth)        VW2 (vrf) | |   | |  + w2 (veth)        VW2 (vrf) | |
+# | |  |\                           | |   | |  |\                           | |
+# | |  | + w2.10                    | |   | |  | + w2.10                    | |
+# | |  |   192.0.2.3/28             | |   | |  |   192.0.2.4/28             | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.20                      | |   | |  + w2.20                      | |
+# | |    198.51.100.3/24            | |   | |    198.51.100.4/24            | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	test_flood
+	test_unicast
+	reapply_config
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_learning
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+	vlan_create $h1 20 v$h1 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx10 type vxlan id 1000	\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000	\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge vlan del vid 20 dev $swp2
+	bridge vlan del vid 10 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1=$1; shift
+	local host_addr2=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	bridge vlan add vid 10 dev w1
+	bridge vlan add vid 20 dev w1
+
+	ip link add name vx10 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx10 up
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx10 master br2
+	tc qdisc add dev vx10 clsact
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx20 up
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx20 master br2
+	tc qdisc add dev vx20 clsact
+
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1/28
+        vlan_create w2 20 vw2 $host_addr2/24
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3 \
+	      198.51.100.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4 \
+	      198.51.100.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx10 and vx20 were the first devices to get
+# attached to the bridge, and that at the point that the local IP is already
+# configured. Try the other scenario of attaching these devices to a bridge
+# that already has local ports members, and only then assign the local IP.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx20 nomaster
+	ip link set dev vx10 nomaster
+
+	rp1_unset_addr
+	sleep 5
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	rp1_set_addr
+	sleep 5
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 192.0.2.2 ": local->local vid 10"
+	ping_test $h1.20 198.51.100.2 ": local->local vid 20"
+	ping_test $h1.10 192.0.2.3 ": local->remote 1 vid 10"
+	ping_test $h1.10 192.0.2.4 ": local->remote 2 vid 10"
+	ping_test $h1.20 198.51.100.3 ": local->remote 1 vid 20"
+	ping_test $h1.20 198.51.100.4 ": local->remote 2 vid 20"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_sw 2>/dev/null || \
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_hw
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
+	local counter
+	local key
+
+	# Packets reach the local host tagged whereas they reach the VxLAN
+	# devices untagged. In order to be able to use the same filter for
+	# all counters, make sure the packets also reach the local host
+	# untagged
+	bridge vlan add vid $vid dev $swp2 untagged
+	for counter in "${counters[@]}"; do
+		flood_counter_install $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $counter
+	done
+	bridge vlan add vid $vid dev $swp2
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+	local -a expects=("${@}")
+
+	RET=0
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 192.0.2.100 10 "flood vlan 10" \
+		10 10 0 10 0
+	__test_flood ca:fe:be:ef:13:37 198.51.100.100 20 "flood vlan 20" \
+		10 0 10 0 10
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local vid=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static vlan $vid 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx10 192.0.2.34"
+			  "$r2_mac vx10 192.0.2.50")
+	local target
+
+	log_info "unicast vlan 10"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 10 $target
+	done
+
+	__test_unicast $h2_mac 192.0.2.2 0 10 "local MAC unicast"
+	__test_unicast $r1_mac 192.0.2.3 1 10 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 192.0.2.4 3 10 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 10 $target
+	done
+
+	log_info "unicast vlan 20"
+
+	targets=("$h2_mac $h2" "$r1_mac vx20 192.0.2.34" \
+		 "$r2_mac vx20 192.0.2.50")
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 20 $target
+	done
+
+	__test_unicast $h2_mac 198.51.100.2 0 20 "local MAC unicast"
+	__test_unicast $r1_mac 198.51.100.3 2 20 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 198.51.100.4 4 20 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 20 $target
+	done
+}
+
+vxlan_ping_test()
+{
+	local ping_dev=$1; shift
+	local ping_dip=$1; shift
+	local ping_args=$1; shift
+	local capture_dev=$1; shift
+	local capture_dir=$1; shift
+	local capture_pref=$1; shift
+	local expect=$1; shift
+
+	local t0=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	ping_do $ping_dev $ping_dip "$ping_args"
+	local t1=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "$capture_dev: Expected to capture $expect packets, got $delta."
+}
+
+__test_learning()
+{
+	local -a expects=(0 0 0 0 0)
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local idx1=$1; shift
+	local idx2=$1; shift
+	local vx=vx$vid
+
+	# Check that flooding works
+	RET=0
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood before learning"
+
+	# Send a packet with source mac set to $mac from host w2 and check that
+	# a corresponding entry is created in the VxLAN device
+	RET=0
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: show learned FDB entry"
+
+	# Repeat first test and check that packets only reach host w2 in ns1
+	RET=0
+
+	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: learned FDB entry"
+
+	# Delete the learned FDB entry from the VxLAN and bridge devices and
+	# check that packets are flooded
+	RET=0
+
+	bridge fdb del dev $vx $mac master self vlan $vid
+	sleep 1
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: deletion of learned FDB entry"
+
+	# Re-learn the first FDB entry and check that it is correctly aged-out
+	RET=0
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	sleep 20
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_fail $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_fail $?
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: Ageing of learned FDB entry"
+
+	# Toggle learning on the bridge port and check that the bridge's FDB
+	# is populated only when it should
+	RET=0
+
+	ip link set dev $vx type bridge_slave learning off
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_fail $?
+
+	ip link set dev $vx type bridge_slave learning on
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: learning toggling on bridge port"
+}
+
+test_learning()
+{
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+	local vid=10
+
+	# Enable learning on the VxLAN devices and set ageing time to 10 seconds
+	ip link set dev br1 type bridge ageing_time 1000
+	ip link set dev vx10 type vxlan ageing 10
+	ip link set dev vx10 type vxlan learning
+	ip link set dev vx20 type vxlan ageing 10
+	ip link set dev vx20 type vxlan learning
+	reapply_config
+
+	log_info "learning vlan 10"
+
+	__test_learning $mac $dst $vid 1 3
+
+	log_info "learning vlan 20"
+
+	mac=ca:fe:be:ef:13:37
+	dst=198.51.100.100
+	vid=20
+
+	__test_learning $mac $dst $vid 2 4
+
+	# Restore previous settings
+	ip link set dev vx20 type vxlan nolearning
+	ip link set dev vx20 type vxlan ageing 300
+	ip link set dev vx10 type vxlan nolearning
+	ip link set dev vx10 type vxlan ageing 300
+	ip link set dev br1 type bridge ageing_time 30000
+	reapply_config
+}
+
+test_all()
+{
+	log_info "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh
new file mode 100755
index 000000000000..b1b2d1a3164f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+"
+source vxlan_bridge_1q.sh