Merge tag 'drm-misc-next-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.19:

UAPI Changes:
- Add writeback connector (Brian Starkey/Liviu Dudau)
- Add "content type" property to HDMI connectors (Stanislav Lisovskiy)

Cross-subsystem Changes:
- some devicetree Docs update
- fix compile breakage on ION due to the dma-buf cleanups (Christian König)

Core Changes:
- Reject over-sized allocation requests early (Chris Wilson)
- gem-fb-helper: Always do implicit sync (Daniel Vetter)
- dma-buf cleanups (Christian König)

Driver Changes:
- Fixes for the otm8009a panel driver (Philippe Cornu)
- Add Innolux TV123WAM panel driver support (Sandeep Panda)
- Move GEM BO to drm_framebuffer in few drivers (Daniel Stone)
- i915 pinning improvements (Chris Wilson)
- Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä)

Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma

include/uapi/drm/drm.h

@@ -687,6 +687,15 @@ struct drm_get_cap {
  */
 #define DRM_CLIENT_CAP_ASPECT_RATIO    4
 
+/**
+ * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
+ *
+ * If set to 1, the DRM core will expose special connectors to be used for
+ * writing back to memory the scene setup in the commit. Depends on client
+ * also supporting DRM_CLIENT_CAP_ATOMIC
+ */
+#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS	5
+
 /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
 struct drm_set_client_cap {
 	__u64 capability;

include/uapi/drm/drm_fourcc.h

@@ -384,6 +384,23 @@ extern "C" {
 #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_THIRTYTWO_GOB \
 	fourcc_mod_code(NVIDIA, 0x15)
 
+/*
+ * Some Broadcom modifiers take parameters, for example the number of
+ * vertical lines in the image. Reserve the lower 32 bits for modifier
+ * type, and the next 24 bits for parameters. Top 8 bits are the
+ * vendor code.
+ */
+#define __fourcc_mod_broadcom_param_shift 8
+#define __fourcc_mod_broadcom_param_bits 48
+#define fourcc_mod_broadcom_code(val, params) \
+	fourcc_mod_code(BROADCOM, ((((__u64)params) << __fourcc_mod_broadcom_param_shift) | val))
+#define fourcc_mod_broadcom_param(m) \
+	((int)(((m) >> __fourcc_mod_broadcom_param_shift) &	\
+	       ((1ULL << __fourcc_mod_broadcom_param_bits) - 1)))
+#define fourcc_mod_broadcom_mod(m) \
+	((m) & ~(((1ULL << __fourcc_mod_broadcom_param_bits) - 1) <<	\
+		 __fourcc_mod_broadcom_param_shift))
+
 /*
  * Broadcom VC4 "T" format
  *
@@ -405,6 +422,48 @@ extern "C" {
  */
 #define DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED fourcc_mod_code(BROADCOM, 1)
 
+/*
+ * Broadcom SAND format
+ *
+ * This is the native format that the H.264 codec block uses.  For VC4
+ * HVS, it is only valid for H.264 (NV12/21) and RGBA modes.
+ *
+ * The image can be considered to be split into columns, and the
+ * columns are placed consecutively into memory.  The width of those
+ * columns can be either 32, 64, 128, or 256 pixels, but in practice
+ * only 128 pixel columns are used.
+ *
+ * The pitch between the start of each column is set to optimally
+ * switch between SDRAM banks. This is passed as the number of lines
+ * of column width in the modifier (we can't use the stride value due
+ * to various core checks that look at it , so you should set the
+ * stride to width*cpp).
+ *
+ * Note that the column height for this format modifier is the same
+ * for all of the planes, assuming that each column contains both Y
+ * and UV.  Some SAND-using hardware stores UV in a separate tiled
+ * image from Y to reduce the column height, which is not supported
+ * with these modifiers.
+ */
+
+#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(2, v)
+#define DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(3, v)
+#define DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(4, v)
+#define DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(5, v)
+
+#define DRM_FORMAT_MOD_BROADCOM_SAND32 \
+	DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(0)
+#define DRM_FORMAT_MOD_BROADCOM_SAND64 \
+	DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(0)
+#define DRM_FORMAT_MOD_BROADCOM_SAND128 \
+	DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(0)
+#define DRM_FORMAT_MOD_BROADCOM_SAND256 \
+	DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(0)
+
 #if defined(__cplusplus)
 }
 #endif

include/uapi/drm/drm_mode.h

@@ -96,6 +96,13 @@ extern "C" {
 #define DRM_MODE_PICTURE_ASPECT_64_27		3
 #define DRM_MODE_PICTURE_ASPECT_256_135		4
 
+/* Content type options */
+#define DRM_MODE_CONTENT_TYPE_NO_DATA		0
+#define DRM_MODE_CONTENT_TYPE_GRAPHICS		1
+#define DRM_MODE_CONTENT_TYPE_PHOTO		2
+#define DRM_MODE_CONTENT_TYPE_CINEMA		3
+#define DRM_MODE_CONTENT_TYPE_GAME		4
+
 /* Aspect ratio flag bitmask (4 bits 22:19) */
 #define DRM_MODE_FLAG_PIC_AR_MASK		(0x0F<<19)
 #define  DRM_MODE_FLAG_PIC_AR_NONE \
@@ -344,6 +351,7 @@ enum drm_mode_subconnector {
 #define DRM_MODE_CONNECTOR_VIRTUAL      15
 #define DRM_MODE_CONNECTOR_DSI		16
 #define DRM_MODE_CONNECTOR_DPI		17
+#define DRM_MODE_CONNECTOR_WRITEBACK	18
 
 struct drm_mode_get_connector {