From f3660937e17c6fcc3a9184dd7d5091110e7e9094 Mon Sep 17 00:00:00 2001 From: Alex Marginean Date: Thu, 16 Jan 2020 20:19:32 +0200 Subject: [PATCH] net: dsa: felix: Handle PAUSE RX regardless of AN result Flow control is used with 2500Base-X and AQR PHYs to do rate adaptation between line side 100/1000 links and MAC running at 2.5G. This is independent of the flow control configuration settled on line side though AN. In general, allowing the MAC to handle flow control even if not negotiated with the link partner should not be a problem, so the patch just enables it in all cases. Signed-off-by: Alex Marginean Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/ocelot/felix.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 269cc6953d47..8a38290c29fd 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -222,8 +222,12 @@ static void felix_phylink_mac_config(struct dsa_switch *ds, int port, * specification in incoming pause frames. */ mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(state->speed); - if (state->pause & MLO_PAUSE_RX) - mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA; + + /* handle Rx pause in all cases, with 2500base-X this is used for rate + * adaptation. + */ + mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA; + if (state->pause & MLO_PAUSE_TX) mac_fc_cfg |= SYS_MAC_FC_CFG_TX_FC_ENA | SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |