diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h new file mode 100644 index 000000000000..2a85360a46f0 --- /dev/null +++ b/drivers/net/sfc/mcdi_pcol.h @@ -0,0 +1,1578 @@ +/**************************************************************************** + * Driver for Solarflare Solarstorm network controllers and boards + * Copyright 2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + + +#ifndef MCDI_PCOL_H +#define MCDI_PCOL_H + +/* Values to be written into FMCR_CZ_RESET_STATE_REG to control boot. */ +/* Power-on reset state */ +#define MC_FW_STATE_POR (1) +/* If this is set in MC_RESET_STATE_REG then it should be + * possible to jump into IMEM without loading code from flash. */ +#define MC_FW_WARM_BOOT_OK (2) +/* The MC main image has started to boot. */ +#define MC_FW_STATE_BOOTING (4) +/* The Scheduler has started. */ +#define MC_FW_STATE_SCHED (8) + +/* Values to be written to the per-port status dword in shared + * memory on reboot and assert */ +#define MC_STATUS_DWORD_REBOOT (0xb007b007) +#define MC_STATUS_DWORD_ASSERT (0xdeaddead) + +/* The current version of the MCDI protocol. + * + * Note that the ROM burnt into the card only talks V0, so at the very + * least every driver must support version 0 and MCDI_PCOL_VERSION + */ +#define MCDI_PCOL_VERSION 1 + +/** + * MCDI version 1 + * + * Each MCDI request starts with an MCDI_HEADER, which is a 32byte + * structure, filled in by the client. + * + * 0 7 8 16 20 22 23 24 31 + * | CODE | R | LEN | SEQ | Rsvd | E | R | XFLAGS | + * | | | + * | | \--- Response + * | \------- Error + * \------------------------------ Resync (always set) + * + * The client writes it's request into MC shared memory, and rings the + * doorbell. Each request is completed by either by the MC writting + * back into shared memory, or by writting out an event. + * + * All MCDI commands support completion by shared memory response. Each + * request may also contain additional data (accounted for by HEADER.LEN), + * and some response's may also contain additional data (again, accounted + * for by HEADER.LEN). + * + * Some MCDI commands support completion by event, in which any associated + * response data is included in the event. + * + * The protocol requires one response to be delivered for every request, a + * request should not be sent unless the response for the previous request + * has been received (either by polling shared memory, or by receiving + * an event). + */ + +/** Request/Response structure */ +#define MCDI_HEADER_OFST 0 +#define MCDI_HEADER_CODE_LBN 0 +#define MCDI_HEADER_CODE_WIDTH 7 +#define MCDI_HEADER_RESYNC_LBN 7 +#define MCDI_HEADER_RESYNC_WIDTH 1 +#define MCDI_HEADER_DATALEN_LBN 8 +#define MCDI_HEADER_DATALEN_WIDTH 8 +#define MCDI_HEADER_SEQ_LBN 16 +#define MCDI_HEADER_RSVD_LBN 20 +#define MCDI_HEADER_RSVD_WIDTH 2 +#define MCDI_HEADER_SEQ_WIDTH 4 +#define MCDI_HEADER_ERROR_LBN 22 +#define MCDI_HEADER_ERROR_WIDTH 1 +#define MCDI_HEADER_RESPONSE_LBN 23 +#define MCDI_HEADER_RESPONSE_WIDTH 1 +#define MCDI_HEADER_XFLAGS_LBN 24 +#define MCDI_HEADER_XFLAGS_WIDTH 8 +/* Request response using event */ +#define MCDI_HEADER_XFLAGS_EVREQ 0x01 + +/* Maximum number of payload bytes */ +#define MCDI_CTL_SDU_LEN_MAX 0xfc + +/* The MC can generate events for two reasons: + * - To complete a shared memory request if XFLAGS_EVREQ was set + * - As a notification (link state, i2c event), controlled + * via MC_CMD_LOG_CTRL + * + * Both events share a common structure: + * + * 0 32 33 36 44 52 60 + * | Data | Cont | Level | Src | Code | Rsvd | + * | + * \ There is another event pending in this notification + * + * If Code==CMDDONE, then the fields are further interpreted as: + * + * - LEVEL==INFO Command succeded + * - LEVEL==ERR Command failed + * + * 0 8 16 24 32 + * | Seq | Datalen | Errno | Rsvd | + * + * These fields are taken directly out of the standard MCDI header, i.e., + * LEVEL==ERR, Datalen == 0 => Reboot + * + * Events can be squirted out of the UART (using LOG_CTRL) without a + * MCDI header. An event can be distinguished from a MCDI response by + * examining the first byte which is 0xc0. This corresponds to the + * non-existent MCDI command MC_CMD_DEBUG_LOG. + * + * 0 7 8 + * | command | Resync | = 0xc0 + * + * Since the event is written in big-endian byte order, this works + * providing bits 56-63 of the event are 0xc0. + * + * 56 60 63 + * | Rsvd | Code | = 0xc0 + * + * Which means for convenience the event code is 0xc for all MC + * generated events. + */ +#define FSE_AZ_EV_CODE_MCDI_EVRESPONSE 0xc + +#define MCDI_EVENT_DATA_LBN 0 +#define MCDI_EVENT_DATA_WIDTH 32 +#define MCDI_EVENT_CONT_LBN 32 +#define MCDI_EVENT_CONT_WIDTH 1 +#define MCDI_EVENT_LEVEL_LBN 33 +#define MCDI_EVENT_LEVEL_WIDTH 3 +#define MCDI_EVENT_LEVEL_INFO (0) +#define MCDI_EVENT_LEVEL_WARN (1) +#define MCDI_EVENT_LEVEL_ERR (2) +#define MCDI_EVENT_LEVEL_FATAL (3) +#define MCDI_EVENT_SRC_LBN 36 +#define MCDI_EVENT_SRC_WIDTH 8 +#define MCDI_EVENT_CODE_LBN 44 +#define MCDI_EVENT_CODE_WIDTH 8 +#define MCDI_EVENT_CODE_BADSSERT (1) +#define MCDI_EVENT_CODE_PMNOTICE (2) +#define MCDI_EVENT_CODE_CMDDONE (3) +#define MCDI_EVENT_CMDDONE_SEQ_LBN 0 +#define MCDI_EVENT_CMDDONE_SEQ_WIDTH 8 +#define MCDI_EVENT_CMDDONE_DATALEN_LBN 8 +#define MCDI_EVENT_CMDDONE_DATALEN_WIDTH 8 +#define MCDI_EVENT_CMDDONE_ERRNO_LBN 16 +#define MCDI_EVENT_CMDDONE_ERRNO_WIDTH 8 +#define MCDI_EVENT_CODE_LINKCHANGE (4) +#define MCDI_EVENT_LINKCHANGE_LP_CAP_LBN 0 +#define MCDI_EVENT_LINKCHANGE_LP_CAP_WIDTH 16 +#define MCDI_EVENT_LINKCHANGE_SPEED_LBN 16 +#define MCDI_EVENT_LINKCHANGE_SPEED_WIDTH 4 +#define MCDI_EVENT_LINKCHANGE_SPEED_100M 1 +#define MCDI_EVENT_LINKCHANGE_SPEED_1G 2 +#define MCDI_EVENT_LINKCHANGE_SPEED_10G 3 +#define MCDI_EVENT_LINKCHANGE_FCNTL_LBN 20 +#define MCDI_EVENT_LINKCHANGE_FCNTL_WIDTH 4 +#define MCDI_EVENT_LINKCHANGE_LINK_FLAGS_LBN 24 +#define MCDI_EVENT_LINKCHANGE_LINK_FLAGS_WIDTH 8 +#define MCDI_EVENT_CODE_SENSOREVT (5) +#define MCDI_EVENT_SENSOREVT_MONITOR_LBN 0 +#define MCDI_EVENT_SENSOREVT_MONITOR_WIDTH 8 +#define MCDI_EVENT_SENSOREVT_STATE_LBN 8 +#define MCDI_EVENT_SENSOREVT_STATE_WIDTH 8 +#define MCDI_EVENT_SENSOREVT_VALUE_LBN 16 +#define MCDI_EVENT_SENSOREVT_VALUE_WIDTH 16 +#define MCDI_EVENT_CODE_SCHEDERR (6) +#define MCDI_EVENT_CODE_REBOOT (7) +#define MCDI_EVENT_CODE_MAC_STATS_DMA (8) +#define MCDI_EVENT_MAC_STATS_DMA_GENERATION_LBN 0 +#define MCDI_EVENT_MAC_STATS_DMA_GENERATION_WIDTH 32 + +/* Non-existent command target */ +#define MC_CMD_ERR_ENOENT 2 +/* assert() has killed the MC */ +#define MC_CMD_ERR_EINTR 4 +/* Caller does not hold required locks */ +#define MC_CMD_ERR_EACCES 13 +/* Resource is currently unavailable (e.g. lock contention) */ +#define MC_CMD_ERR_EBUSY 16 +/* Invalid argument to target */ +#define MC_CMD_ERR_EINVAL 22 +/* Non-recursive resource is already acquired */ +#define MC_CMD_ERR_EDEADLK 35 +/* Operation not implemented */ +#define MC_CMD_ERR_ENOSYS 38 +/* Operation timed out */ +#define MC_CMD_ERR_ETIME 62 + +#define MC_CMD_ERR_CODE_OFST 0 + + +/* MC_CMD_READ32: (debug, variadic out) + * Read multiple 32byte words from MC memory + */ +#define MC_CMD_READ32 0x01 +#define MC_CMD_READ32_IN_LEN 8 +#define MC_CMD_READ32_IN_ADDR_OFST 0 +#define MC_CMD_READ32_IN_NUMWORDS_OFST 4 +#define MC_CMD_READ32_OUT_LEN(_numwords) \ + (4 * (_numwords)) +#define MC_CMD_READ32_OUT_BUFFER_OFST 0 + +/* MC_CMD_WRITE32: (debug, variadic in) + * Write multiple 32byte words to MC memory + */ +#define MC_CMD_WRITE32 0x02 +#define MC_CMD_WRITE32_IN_LEN(_numwords) (((_numwords) * 4) + 4) +#define MC_CMD_WRITE32_IN_ADDR_OFST 0 +#define MC_CMD_WRITE32_IN_BUFFER_OFST 4 +#define MC_CMD_WRITE32_OUT_LEN 0 + +/* MC_CMD_COPYCODE: (debug) + * Copy MC code between two locations and jump + */ +#define MC_CMD_COPYCODE 0x03 +#define MC_CMD_COPYCODE_IN_LEN 16 +#define MC_CMD_COPYCODE_IN_SRC_ADDR_OFST 0 +#define MC_CMD_COPYCODE_IN_DEST_ADDR_OFST 4 +#define MC_CMD_COPYCODE_IN_NUMWORDS_OFST 8 +#define MC_CMD_COPYCODE_IN_JUMP_OFST 12 +/* Control should return to the caller rather than jumping */ +#define MC_CMD_COPYCODE_JUMP_NONE 1 +#define MC_CMD_COPYCODE_OUT_LEN 0 + +/* MC_CMD_SET_FUNC: (debug) + * Select function for function-specific commands. + */ +#define MC_CMD_SET_FUNC 0x04 +#define MC_CMD_SET_FUNC_IN_LEN 4 +#define MC_CMD_SET_FUNC_IN_FUNC_OFST 0 +#define MC_CMD_SET_FUNC_OUT_LEN 0 + +/* MC_CMD_GET_BOOT_STATUS: + * Get the instruction address from which the MC booted. + */ +#define MC_CMD_GET_BOOT_STATUS 0x05 +#define MC_CMD_GET_BOOT_STATUS_IN_LEN 0 +#define MC_CMD_GET_BOOT_STATUS_OUT_LEN 8 +#define MC_CMD_GET_BOOT_STATUS_OUT_BOOT_OFFSET_OFST 0 +#define MC_CMD_GET_BOOT_STATUS_OUT_FLAGS_OFST 4 +/* Reboot caused by watchdog */ +#define MC_CMD_GET_BOOT_STATUS_FLAGS_WATCHDOG_LBN (0) +#define MC_CMD_GET_BOOT_STATUS_FLAGS_WATCHDOG_WIDTH (1) +/* MC booted from primary flash partition */ +#define MC_CMD_GET_BOOT_STATUS_FLAGS_PRIMARY_LBN (1) +#define MC_CMD_GET_BOOT_STATUS_FLAGS_PRIMARY_WIDTH (1) +/* MC booted from backup flash partition */ +#define MC_CMD_GET_BOOT_STATUS_FLAGS_BACKUP_LBN (2) +#define MC_CMD_GET_BOOT_STATUS_FLAGS_BACKUP_WIDTH (1) + +/* MC_CMD_GET_ASSERTS: (debug, variadic out) + * Get (and optionally clear) the current assertion status. + * + * Only OUT.GLOBAL_FLAGS is guaranteed to exist in the completion + * payload. The other fields will only be present if + * OUT.GLOBAL_FLAGS != NO_FAILS + */ +#define MC_CMD_GET_ASSERTS 0x06 +#define MC_CMD_GET_ASSERTS_IN_LEN 4 +#define MC_CMD_GET_ASSERTS_IN_CLEAR_OFST 0 +#define MC_CMD_GET_ASSERTS_OUT_LEN 140 +/* Assertion status flag */ +#define MC_CMD_GET_ASSERTS_OUT_GLOBAL_FLAGS_OFST 0 +/*! No assertions have failed. */ +#define MC_CMD_GET_ASSERTS_FLAGS_NO_FAILS 1 +/*! A system-level assertion has failed. */ +#define MC_CMD_GET_ASSERTS_FLAGS_SYS_FAIL 2 +/*! A thread-level assertion has failed. */ +#define MC_CMD_GET_ASSERTS_FLAGS_THR_FAIL 3 +/*! The system was reset by the watchdog. */ +#define MC_CMD_GET_ASSERTS_FLAGS_WDOG_FIRED 4 +/* Failing PC value */ +#define MC_CMD_GET_ASSERTS_OUT_SAVED_PC_OFFS_OFST 4 +/* Saved GP regs */ +#define MC_CMD_GET_ASSERTS_OUT_GP_REGS_OFFS_OFST 8 +#define MC_CMD_GET_ASSERTS_OUT_GP_REGS_LEN 124 +/* Failing thread address */ +#define MC_CMD_GET_ASSERTS_OUT_THREAD_OFFS_OFST 132 + +/* MC_CMD_LOG_CTRL: + * Determine the output stream for various events and messages + */ +#define MC_CMD_LOG_CTRL 0x07 +#define MC_CMD_LOG_CTRL_IN_LEN 8 +#define MC_CMD_LOG_CTRL_IN_LOG_DEST_OFST 0 +#define MC_CMD_LOG_CTRL_IN_LOG_DEST_UART (1) +#define MC_CMD_LOG_CTRL_IN_LOG_DEST_EVQ (2) +#define MC_CMD_LOG_CTRL_IN_LOG_DEST_EVQ_OFST 4 +#define MC_CMD_LOG_CTRL_OUT_LEN 0 + +/* MC_CMD_GET_VERSION: + * Get version information about the MC firmware + */ +#define MC_CMD_GET_VERSION 0x08 +#define MC_CMD_GET_VERSION_IN_LEN 0 +#define MC_CMD_GET_VERSION_V0_OUT_LEN 4 +#define MC_CMD_GET_VERSION_V1_OUT_LEN 32 +#define MC_CMD_GET_VERSION_OUT_FIRMWARE_OFST 0 +/* Reserved version number to indicate "any" version. */ +#define MC_CMD_GET_VERSION_OUT_FIRMWARE_ANY 0xffffffff +/* The version response of a boot ROM awaiting rescue */ +#define MC_CMD_GET_VERSION_OUT_FIRMWARE_BOOTROM 0xb0070000 +#define MC_CMD_GET_VERSION_V1_OUT_PCOL_OFST 4 +/* 128bit mask of functions supported by the current firmware */ +#define MC_CMD_GET_VERSION_V1_OUT_SUPPORTED_FUNCS_OFST 8 +/* The command set exported by the boot ROM (MCDI v0) */ +#define MC_CMD_GET_VERSION_V0_SUPPORTED_FUNCS { \ + (1 << MC_CMD_READ32) | \ + (1 << MC_CMD_WRITE32) | \ + (1 << MC_CMD_COPYCODE) | \ + (1 << MC_CMD_GET_VERSION), \ + 0, 0, 0 } +#define MC_CMD_GET_VERSION_OUT_VERSION_OFST 24 + +/* Vectors in the boot ROM */ +/* Point to the copycode entry point. */ +#define MC_BOOTROM_COPYCODE_VEC (0x7f4) +/* Points to the recovery mode entry point. */ +#define MC_BOOTROM_NOFLASH_VEC (0x7f8) + +/* Test execution limits */ +#define MC_TESTEXEC_VARIANT_COUNT 16 +#define MC_TESTEXEC_RESULT_COUNT 7 + +/* MC_CMD_SET_TESTVARS: (debug, variadic in) + * Write variant words for test. + * + * The user supplies a bitmap of the variants they wish to set. + * They must ensure that IN.LEN >= 4 + 4 * ffs(BITMAP) + */ +#define MC_CMD_SET_TESTVARS 0x09 +#define MC_CMD_SET_TESTVARS_IN_LEN(_numwords) \ + (4 + 4*(_numwords)) +#define MC_CMD_SET_TESTVARS_IN_ARGS_BITMAP_OFST 0 +/* Up to MC_TESTEXEC_VARIANT_COUNT of 32byte words start here */ +#define MC_CMD_SET_TESTVARS_IN_ARGS_BUFFER_OFST 4 +#define MC_CMD_SET_TESTVARS_OUT_LEN 0 + +/* MC_CMD_GET_TESTRCS: (debug, variadic out) + * Return result words from test. + */ +#define MC_CMD_GET_TESTRCS 0x0a +#define MC_CMD_GET_TESTRCS_IN_LEN 4 +#define MC_CMD_GET_TESTRCS_IN_NUMWORDS_OFST 0 +#define MC_CMD_GET_TESTRCS_OUT_LEN(_numwords) \ + (4 * (_numwords)) +#define MC_CMD_GET_TESTRCS_OUT_BUFFER_OFST 0 + +/* MC_CMD_RUN_TEST: (debug) + * Run the test exported by this firmware image + */ +#define MC_CMD_RUN_TEST 0x0b +#define MC_CMD_RUN_TEST_IN_LEN 0 +#define MC_CMD_RUN_TEST_OUT_LEN 0 + +/* MC_CMD_CSR_READ32: (debug, variadic out) + * Read 32bit words from the indirect memory map + */ +#define MC_CMD_CSR_READ32 0x0c +#define MC_CMD_CSR_READ32_IN_LEN 12 +#define MC_CMD_CSR_READ32_IN_ADDR_OFST 0 +#define MC_CMD_CSR_READ32_IN_STEP_OFST 4 +#define MC_CMD_CSR_READ32_IN_NUMWORDS_OFST 8 +#define MC_CMD_CSR_READ32_OUT_LEN(_numwords) \ + (((_numwords) * 4) + 4) +/* IN.NUMWORDS of 32bit words start here */ +#define MC_CMD_CSR_READ32_OUT_BUFFER_OFST 0 +#define MC_CMD_CSR_READ32_OUT_IREG_STATUS_OFST(_numwords) \ + ((_numwords) * 4) + +/* MC_CMD_CSR_WRITE32: (debug, variadic in) + * Write 32bit dwords to the indirect memory map + */ +#define MC_CMD_CSR_WRITE32 0x0d +#define MC_CMD_CSR_WRITE32_IN_LEN(_numwords) \ + (((_numwords) * 4) + 8) +#define MC_CMD_CSR_WRITE32_IN_ADDR_OFST 0 +#define MC_CMD_CSR_WRITE32_IN_STEP_OFST 4 +/* Multiple 32bit words of data to write start here */ +#define MC_CMD_CSR_WRITE32_IN_BUFFER_OFST 8 +#define MC_CMD_CSR_WRITE32_OUT_LEN 4 +#define MC_CMD_CSR_WRITE32_OUT_STATUS_OFST 0 + +/* MC_CMD_JTAG_WORK: (debug, fpga only) + * Process JTAG work buffer for RBF acceleration. + * + * Host: bit count, (up to) 32 words of data to clock out to JTAG + * (bits 1,0=TMS,TDO for first bit; bits 3,2=TMS,TDO for second bit, etc.) + * MC: bit count, (up to) 32 words of data clocked in from JTAG + * (bit 0=TDI for first bit, bit 1=TDI for second bit, etc.; [31:16] unused) + */ +#define MC_CMD_JTAG_WORK 0x0e + +/* MC_CMD_STACKINFO: (debug, variadic out) + * Get stack information + * + * Host: nothing + * MC: (thread ptr, stack size, free space) for each thread in system + */ +#define MC_CMD_STACKINFO 0x0f + +/* MC_CMD_MDIO_READ: + * MDIO register read + */ +#define MC_CMD_MDIO_READ 0x10 +#define MC_CMD_MDIO_READ_IN_LEN 16 +#define MC_CMD_MDIO_READ_IN_BUS_OFST 0 +#define MC_CMD_MDIO_READ_IN_PRTAD_OFST 4 +#define MC_CMD_MDIO_READ_IN_DEVAD_OFST 8 +#define MC_CMD_MDIO_READ_IN_ADDR_OFST 12 +#define MC_CMD_MDIO_READ_OUT_LEN 8 +#define MC_CMD_MDIO_READ_OUT_VALUE_OFST 0 +#define MC_CMD_MDIO_READ_OUT_STATUS_OFST 4 + +/* MC_CMD_MDIO_WRITE: + * MDIO register write + */ +#define MC_CMD_MDIO_WRITE 0x11 +#define MC_CMD_MDIO_WRITE_IN_LEN 20 +#define MC_CMD_MDIO_WRITE_IN_BUS_OFST 0 +#define MC_CMD_MDIO_WRITE_IN_PRTAD_OFST 4 +#define MC_CMD_MDIO_WRITE_IN_DEVAD_OFST 8 +#define MC_CMD_MDIO_WRITE_IN_ADDR_OFST 12 +#define MC_CMD_MDIO_WRITE_IN_VALUE_OFST 16 +#define MC_CMD_MDIO_WRITE_OUT_LEN 4 +#define MC_CMD_MDIO_WRITE_OUT_STATUS_OFST 0 + +/* By default all the MCDI MDIO operations perform clause45 mode. + * If you want to use clause22 then set DEVAD = MC_CMD_MDIO_CLAUSE22. + */ +#define MC_CMD_MDIO_CLAUSE22 32 + +/* There are two MDIO buses: one for the internal PHY, and one for external + * devices. + */ +#define MC_CMD_MDIO_BUS_INTERNAL 0 +#define MC_CMD_MDIO_BUS_EXTERNAL 1 + +/* The MDIO commands return the raw status bits from the MDIO block. A "good" + * transaction should have the DONE bit set and all other bits clear. + */ +#define MC_CMD_MDIO_STATUS_GOOD 0x08 + + +/* MC_CMD_DBI_WRITE: (debug) + * Write DBI register(s) + * + * Host: address, byte-enables (and VF selection, and cs2 flag), + * value [,address ...] + * MC: nothing + */ +#define MC_CMD_DBI_WRITE 0x12 +#define MC_CMD_DBI_WRITE_IN_LEN(_numwords) \ + (12 * (_numwords)) +#define MC_CMD_DBI_WRITE_IN_ADDRESS_OFST(_word) \ + (((_word) * 12) + 0) +#define MC_CMD_DBI_WRITE_IN_BYTE_MASK_OFST(_word) \ + (((_word) * 12) + 4) +#define MC_CMD_DBI_WRITE_IN_VALUE_OFST(_word) \ + (((_word) * 12) + 8) +#define MC_CMD_DBI_WRITE_OUT_LEN 0 + +/* MC_CMD_DBI_READ: (debug) + * Read DBI register(s) + * + * Host: address, [,address ...] + * MC: value [,value ...] + * (note: this does not support reading from VFs, but is retained for backwards + * compatibility; see MC_CMD_DBI_READX below) + */ +#define MC_CMD_DBI_READ 0x13 +#define MC_CMD_DBI_READ_IN_LEN(_numwords) \ + (4 * (_numwords)) +#define MC_CMD_DBI_READ_OUT_LEN(_numwords) \ + (4 * (_numwords)) + +/* MC_CMD_PORT_READ32: (debug) + * Read a 32-bit register from the indirect port register map. + * + * The port to access is implied by the Shared memory channel used. + */ +#define MC_CMD_PORT_READ32 0x14 +#define MC_CMD_PORT_READ32_IN_LEN 4 +#define MC_CMD_PORT_READ32_IN_ADDR_OFST 0 +#define MC_CMD_PORT_READ32_OUT_LEN 8 +#define MC_CMD_PORT_READ32_OUT_VALUE_OFST 0 +#define MC_CMD_PORT_READ32_OUT_STATUS_OFST 4 + +/* MC_CMD_PORT_WRITE32: (debug) + * Write a 32-bit register to the indirect port register map. + * + * The port to access is implied by the Shared memory channel used. + */ +#define MC_CMD_PORT_WRITE32 0x15 +#define MC_CMD_PORT_WRITE32_IN_LEN 8 +#define MC_CMD_PORT_WRITE32_IN_ADDR_OFST 0 +#define MC_CMD_PORT_WRITE32_IN_VALUE_OFST 4 +#define MC_CMD_PORT_WRITE32_OUT_LEN 4 +#define MC_CMD_PORT_WRITE32_OUT_STATUS_OFST 0 + +/* MC_CMD_PORT_READ128: (debug) + * Read a 128-bit register from indirect port register map + * + * The port to access is implied by the Shared memory channel used. + */ +#define MC_CMD_PORT_READ128 0x16 +#define MC_CMD_PORT_READ128_IN_LEN 4 +#define MC_CMD_PORT_READ128_IN_ADDR_OFST 0 +#define MC_CMD_PORT_READ128_OUT_LEN 20 +#define MC_CMD_PORT_READ128_OUT_VALUE_OFST 0 +#define MC_CMD_PORT_READ128_OUT_STATUS_OFST 16 + +/* MC_CMD_PORT_WRITE128: (debug) + * Write a 128-bit register to indirect port register map. + * + * The port to access is implied by the Shared memory channel used. + */ +#define MC_CMD_PORT_WRITE128 0x17 +#define MC_CMD_PORT_WRITE128_IN_LEN 20 +#define MC_CMD_PORT_WRITE128_IN_ADDR_OFST 0 +#define MC_CMD_PORT_WRITE128_IN_VALUE_OFST 4 +#define MC_CMD_PORT_WRITE128_OUT_LEN 4 +#define MC_CMD_PORT_WRITE128_OUT_STATUS_OFST 0 + +/* MC_CMD_GET_BOARD_CFG: + * Returns the MC firmware configuration structure + * + * The FW_SUBTYPE_LIST contains a 16-bit value for each of the 12 types of + * NVRAM area. The values are defined in the firmware/mc/platform/.c file + * for a specific board type, but otherwise have no meaning to the MC; they + * are used by the driver to manage selection of appropriate firmware updates. + */ +#define MC_CMD_GET_BOARD_CFG 0x18 +#define MC_CMD_GET_BOARD_CFG_IN_LEN 0 +#define MC_CMD_GET_BOARD_CFG_OUT_LEN 96 +#define MC_CMD_GET_BOARD_CFG_OUT_BOARD_TYPE_OFST 0 +#define MC_CMD_GET_BOARD_CFG_OUT_BOARD_NAME_OFST 4 +#define MC_CMD_GET_BOARD_CFG_OUT_BOARD_NAME_LEN 32 +#define MC_CMD_GET_BOARD_CFG_OUT_CAPABILITIES_PORT0_OFST 36 +#define MC_CMD_GET_BOARD_CFG_OUT_CAPABILITIES_PORT1_OFST 40 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_OFST 44 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_LEN 6 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1_OFST 50 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1_LEN 6 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_COUNT_PORT0_OFST 56 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_COUNT_PORT1_OFST 60 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_STRIDE_PORT0_OFST 64 +#define MC_CMD_GET_BOARD_CFG_OUT_MAC_STRIDE_PORT1_OFST 68 +#define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_OFST 72 +#define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN 24 + +/* MC_CMD_DBI_READX: (debug) + * Read DBI register(s) -- extended functionality + * + * Host: vf selection, address, [,vf selection ...] + * MC: value [,value ...] + */ +#define MC_CMD_DBI_READX 0x19 +#define MC_CMD_DBI_READX_IN_LEN(_numwords) \ + (8*(_numwords)) +#define MC_CMD_DBI_READX_OUT_LEN(_numwords) \ + (4*(_numwords)) + +/* MC_CMD_SET_RAND_SEED: + * Set the 16byte seed for the MC psuedo-random generator + */ +#define MC_CMD_SET_RAND_SEED 0x1a +#define MC_CMD_SET_RAND_SEED_IN_LEN 16 +#define MC_CMD_SET_RAND_SEED_IN_SEED_OFST 0 +#define MC_CMD_SET_RAND_SEED_OUT_LEN 0 + +/* MC_CMD_LTSSM_HIST: (debug) + * Retrieve the history of the LTSSM, if the build supports it. + * + * Host: nothing + * MC: variable number of LTSSM values, as bytes + * The history is read-to-clear. + */ +#define MC_CMD_LTSSM_HIST 0x1b + +/* MC_CMD_DRV_ATTACH: + * Inform MCPU that this port is managed on the host (i.e. driver active) + */ +#define MC_CMD_DRV_ATTACH 0x1c +#define MC_CMD_DRV_ATTACH_IN_LEN 8 +#define MC_CMD_DRV_ATTACH_IN_NEW_STATE_OFST 0 +#define MC_CMD_DRV_ATTACH_IN_UPDATE_OFST 4 +#define MC_CMD_DRV_ATTACH_OUT_LEN 4 +#define MC_CMD_DRV_ATTACH_OUT_OLD_STATE_OFST 0 + +/* MC_CMD_NCSI_PROD: (debug) + * Trigger an NC-SI event (and possibly an AEN in response) + */ +#define MC_CMD_NCSI_PROD 0x1d +#define MC_CMD_NCSI_PROD_IN_LEN 4 +#define MC_CMD_NCSI_PROD_IN_EVENTS_OFST 0 +#define MC_CMD_NCSI_PROD_LINKCHANGE_LBN 0 +#define MC_CMD_NCSI_PROD_LINKCHANGE_WIDTH 1 +#define MC_CMD_NCSI_PROD_RESET_LBN 1 +#define MC_CMD_NCSI_PROD_RESET_WIDTH 1 +#define MC_CMD_NCSI_PROD_DRVATTACH_LBN 2 +#define MC_CMD_NCSI_PROD_DRVATTACH_WIDTH 1 +#define MC_CMD_NCSI_PROD_OUT_LEN 0 + +/* Enumeration */ +#define MC_CMD_NCSI_PROD_LINKCHANGE 0 +#define MC_CMD_NCSI_PROD_RESET 1 +#define MC_CMD_NCSI_PROD_DRVATTACH 2 + +/* MC_CMD_DEVEL: (debug) + * Reserved for development + */ +#define MC_CMD_DEVEL 0x1e + +/* MC_CMD_SHMUART: (debug) + * Route UART output to circular buffer in shared memory instead. + */ +#define MC_CMD_SHMUART 0x1f +#define MC_CMD_SHMUART_IN_FLAG_OFST 0 +#define MC_CMD_SHMUART_IN_LEN 4 +#define MC_CMD_SHMUART_OUT_LEN 0 + +/* MC_CMD_PORT_RESET: + * Generic per-port reset. There is no equivalent for per-board reset. + * + * Locks required: None + * Return code: 0, ETIME + */ +#define MC_CMD_PORT_RESET 0x20 +#define MC_CMD_PORT_RESET_IN_LEN 0 +#define MC_CMD_PORT_RESET_OUT_LEN 0 + +/* MC_CMD_RESOURCE_LOCK: + * Generic resource lock/unlock interface. + * + * Locks required: None + * Return code: 0, + * EBUSY (if trylock is contended by other port), + * EDEADLK (if trylock is already acquired by this port) + * EINVAL (if unlock doesn't own the lock) + */ +#define MC_CMD_RESOURCE_LOCK 0x21 +#define MC_CMD_RESOURCE_LOCK_IN_LEN 8 +#define MC_CMD_RESOURCE_LOCK_IN_ACTION_OFST 0 +#define MC_CMD_RESOURCE_LOCK_ACTION_TRYLOCK 1 +#define MC_CMD_RESOURCE_LOCK_ACTION_UNLOCK 0 +#define MC_CMD_RESOURCE_LOCK_IN_RESOURCE_OFST 4 +#define MC_CMD_RESOURCE_LOCK_I2C 2 +#define MC_CMD_RESOURCE_LOCK_PHY 3 +#define MC_CMD_RESOURCE_LOCK_OUT_LEN 0 + +/* MC_CMD_SPI_COMMAND: (variadic in, variadic out) + * Read/Write to/from the SPI device. + * + * Locks required: SPI_LOCK + * Return code: 0, ETIME, EINVAL, EACCES (if SPI_LOCK is not held) + */ +#define MC_CMD_SPI_COMMAND 0x22 +#define MC_CMD_SPI_COMMAND_IN_LEN(_write_bytes) (12 + (_write_bytes)) +#define MC_CMD_SPI_COMMAND_IN_ARGS_OFST 0 +#define MC_CMD_SPI_COMMAND_IN_ARGS_ADDRESS_OFST 0 +#define MC_CMD_SPI_COMMAND_IN_ARGS_READ_BYTES_OFST 4 +#define MC_CMD_SPI_COMMAND_IN_ARGS_CHIP_SELECT_OFST 8 +/* Data to write here */ +#define MC_CMD_SPI_COMMAND_IN_WRITE_BUFFER_OFST 12 +#define MC_CMD_SPI_COMMAND_OUT_LEN(_read_bytes) (_read_bytes) +/* Data read here */ +#define MC_CMD_SPI_COMMAND_OUT_READ_BUFFER_OFST 0 + +/* MC_CMD_I2C_READ_WRITE: (variadic in, variadic out) + * Read/Write to/from the I2C bus. + * + * Locks required: I2C_LOCK + * Return code: 0, ETIME, EINVAL, EACCES (if I2C_LOCK is not held) + */ +#define MC_CMD_I2C_RW 0x23 +#define MC_CMD_I2C_RW_IN_LEN(_write_bytes) (8 + (_write_bytes)) +#define MC_CMD_I2C_RW_IN_ARGS_OFST 0 +#define MC_CMD_I2C_RW_IN_ARGS_ADDR_OFST 0 +#define MC_CMD_I2C_RW_IN_ARGS_READ_BYTES_OFST 4 +/* Data to write here */ +#define MC_CMD_I2C_RW_IN_WRITE_BUFFER_OFSET 8 +#define MC_CMD_I2C_RW_OUT_LEN(_read_bytes) (_read_bytes) +/* Data read here */ +#define MC_CMD_I2C_RW_OUT_READ_BUFFER_OFST 0 + +/* Generic phy capability bitmask */ +#define MC_CMD_PHY_CAP_10HDX_LBN 1 +#define MC_CMD_PHY_CAP_10HDX_WIDTH 1 +#define MC_CMD_PHY_CAP_10FDX_LBN 2 +#define MC_CMD_PHY_CAP_10FDX_WIDTH 1 +#define MC_CMD_PHY_CAP_100HDX_LBN 3 +#define MC_CMD_PHY_CAP_100HDX_WIDTH 1 +#define MC_CMD_PHY_CAP_100FDX_LBN 4 +#define MC_CMD_PHY_CAP_100FDX_WIDTH 1 +#define MC_CMD_PHY_CAP_1000HDX_LBN 5 +#define MC_CMD_PHY_CAP_1000HDX_WIDTH 1 +#define MC_CMD_PHY_CAP_1000FDX_LBN 6 +#define MC_CMD_PHY_CAP_1000FDX_WIDTH 1 +#define MC_CMD_PHY_CAP_10000FDX_LBN 7 +#define MC_CMD_PHY_CAP_10000FDX_WIDTH 1 +#define MC_CMD_PHY_CAP_PAUSE_LBN 8 +#define MC_CMD_PHY_CAP_PAUSE_WIDTH 1 +#define MC_CMD_PHY_CAP_ASYM_LBN 9 +#define MC_CMD_PHY_CAP_ASYM_WIDTH 1 +#define MC_CMD_PHY_CAP_AN_LBN 10 +#define MC_CMD_PHY_CAP_AN_WIDTH 1 + +/* Generic loopback enumeration */ +#define MC_CMD_LOOPBACK_NONE 0 +#define MC_CMD_LOOPBACK_DATA 1 +#define MC_CMD_LOOPBACK_GMAC 2 +#define MC_CMD_LOOPBACK_XGMII 3 +#define MC_CMD_LOOPBACK_XGXS 4 +#define MC_CMD_LOOPBACK_XAUI 5 +#define MC_CMD_LOOPBACK_GMII 6 +#define MC_CMD_LOOPBACK_SGMII 7 +#define MC_CMD_LOOPBACK_XGBR 8 +#define MC_CMD_LOOPBACK_XFI 9 +#define MC_CMD_LOOPBACK_XAUI_FAR 10 +#define MC_CMD_LOOPBACK_GMII_FAR 11 +#define MC_CMD_LOOPBACK_SGMII_FAR 12 +#define MC_CMD_LOOPBACK_XFI_FAR 13 +#define MC_CMD_LOOPBACK_GPHY 14 +#define MC_CMD_LOOPBACK_PHYXS 15 +#define MC_CMD_LOOPBACK_PCS 16 +#define MC_CMD_LOOPBACK_PMAPMD 17 +#define MC_CMD_LOOPBACK_XPORT 18 +#define MC_CMD_LOOPBACK_XGMII_WS 19 +#define MC_CMD_LOOPBACK_XAUI_WS 20 +#define MC_CMD_LOOPBACK_XAUI_WS_FAR 21 +#define MC_CMD_LOOPBACK_XAUI_WS_NEAR 22 +#define MC_CMD_LOOPBACK_GMII_WS 23 +#define MC_CMD_LOOPBACK_XFI_WS 24 +#define MC_CMD_LOOPBACK_XFI_WS_FAR 25 +#define MC_CMD_LOOPBACK_PHYXS_WS 26 + +/* Generic PHY statistics enumeration */ +#define MC_CMD_OUI 0 +#define MC_CMD_PMA_PMD_LINK_UP 1 +#define MC_CMD_PMA_PMD_RX_FAULT 2 +#define MC_CMD_PMA_PMD_TX_FAULT 3 +#define MC_CMD_PMA_PMD_SIGNAL 4 +#define MC_CMD_PMA_PMD_SNR_A 5 +#define MC_CMD_PMA_PMD_SNR_B 6 +#define MC_CMD_PMA_PMD_SNR_C 7 +#define MC_CMD_PMA_PMD_SNR_D 8 +#define MC_CMD_PCS_LINK_UP 9 +#define MC_CMD_PCS_RX_FAULT 10 +#define MC_CMD_PCS_TX_FAULT 11 +#define MC_CMD_PCS_BER 12 +#define MC_CMD_PCS_BLOCK_ERRORS 13 +#define MC_CMD_PHYXS_LINK_UP 14 +#define MC_CMD_PHYXS_RX_FAULT 15 +#define MC_CMD_PHYXS_TX_FAULT 16 +#define MC_CMD_PHYXS_ALIGN 17 +#define MC_CMD_PHYXS_SYNC 18 +#define MC_CMD_AN_LINK_UP 19 +#define MC_CMD_AN_COMPLETE 20 +#define MC_CMD_AN_10GBT_STATUS 21 +#define MC_CMD_CL22_LINK_UP 22 +#define MC_CMD_PHY_NSTATS 23 + +/* MC_CMD_GET_PHY_CFG: + * Report PHY configuration. This guarantees to succeed even if the PHY is in + * a "zombie" state. + * + * Locks required: None + * Return code: 0 + */ +#define MC_CMD_GET_PHY_CFG 0x24 + +#define MC_CMD_GET_PHY_CFG_IN_LEN 0 +#define MC_CMD_GET_PHY_CFG_OUT_LEN 72 + +#define MC_CMD_GET_PHY_CFG_OUT_FLAGS_OFST 0 +#define MC_CMD_GET_PHY_CFG_PRESENT_LBN 0 +#define MC_CMD_GET_PHY_CFG_PRESENT_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_SHORTBIST_LBN 1 +#define MC_CMD_GET_PHY_CFG_SHORTBIST_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_LONGBIST_LBN 2 +#define MC_CMD_GET_PHY_CFG_LONGBIST_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_LOWPOWER_LBN 3 +#define MC_CMD_GET_PHY_CFG_LOWPOWER_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_POWEROFF_LBN 4 +#define MC_CMD_GET_PHY_CFG_POWEROFF_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_TXDIS_LBN 5 +#define MC_CMD_GET_PHY_CFG_TXDIS_WIDTH 1 +#define MC_CMD_GET_PHY_CFG_OUT_TYPE_OFST 4 +/* Bitmask of supported capabilities */ +#define MC_CMD_GET_PHY_CFG_OUT_SUPPORTED_CAP_OFST 8 +#define MC_CMD_GET_PHY_CFG_OUT_CHANNEL_OFST 12 +#define MC_CMD_GET_PHY_CFG_OUT_PRT_OFST 16 +/* PHY statistics bitmap */ +#define MC_CMD_GET_PHY_CFG_OUT_STATS_MASK_OFST 20 +/* PHY type/name string */ +#define MC_CMD_GET_PHY_CFG_OUT_NAME_OFST 24 +#define MC_CMD_GET_PHY_CFG_OUT_NAME_LEN 20 +#define MC_CMD_GET_PHY_CFG_OUT_MEDIA_TYPE_OFST 44 +#define MC_CMD_MEDIA_XAUI 1 +#define MC_CMD_MEDIA_CX4 2 +#define MC_CMD_MEDIA_KX4 3 +#define MC_CMD_MEDIA_XFP 4 +#define MC_CMD_MEDIA_SFP_PLUS 5 +#define MC_CMD_MEDIA_BASE_T 6 +/* MDIO "MMDS" supported */ +#define MC_CMD_GET_PHY_CFG_OUT_MMD_MASK_OFST 48 +/* Native clause 22 */ +#define MC_CMD_MMD_CLAUSE22 0 +#define MC_CMD_MMD_CLAUSE45_PMAPMD 1 +#define MC_CMD_MMD_CLAUSE45_WIS 2 +#define MC_CMD_MMD_CLAUSE45_PCS 3 +#define MC_CMD_MMD_CLAUSE45_PHYXS 4 +#define MC_CMD_MMD_CLAUSE45_DTEXS 5 +#define MC_CMD_MMD_CLAUSE45_TC 6 +#define MC_CMD_MMD_CLAUSE45_AN 7 +/* Clause22 proxied over clause45 by PHY */ +#define MC_CMD_MMD_CLAUSE45_C22EXT 29 +#define MC_CMD_MMD_CLAUSE45_VEND1 30 +#define MC_CMD_MMD_CLAUSE45_VEND2 31 +/* PHY stepping version */ +#define MC_CMD_GET_PHY_CFG_OUT_REVISION_OFST 52 +#define MC_CMD_GET_PHY_CFG_OUT_REVISION_LEN 20 + +/* MC_CMD_START_PHY_BIST: + * Start a BIST test on the PHY. + * + * Locks required: PHY_LOCK if doing a PHY BIST + * Return code: 0, EINVAL, EACCES (if PHY_LOCK is not held) + */ +#define MC_CMD_START_BIST 0x25 +#define MC_CMD_START_BIST_IN_LEN 4 +#define MC_CMD_START_BIST_TYPE_OFST 0 + +/* Run the PHY's short BIST */ +#define MC_CMD_PHY_BIST_SHORT 1 +/* Run the PHY's long BIST */ +#define MC_CMD_PHY_BIST_LONG 2 +/* Run BIST on the currently selected BPX Serdes (XAUI or XFI) */ +#define MC_CMD_BPX_SERDES_BIST 3 + +/* MC_CMD_POLL_PHY_BIST: (variadic output) + * Poll for BIST completion + * + * Returns a single status code, and a binary blob of phy-specific + * bist output. If the driver can't succesfully parse the BIST output, + * it should still respect the Pass/Fail in OUT.RESULT. + * + * Locks required: PHY_LOCK if doing a PHY BIST + * Return code: 0, EACCES (if PHY_LOCK is not held) + */ +#define MC_CMD_POLL_BIST 0x26 +#define MC_CMD_POLL_BIST_IN_LEN 0 +#define MC_CMD_POLL_BIST_OUT_LEN UNKNOWN +#define MC_CMD_POLL_BIST_OUT_RESULT_OFST 0 +#define MC_CMD_POLL_BIST_RUNNING 1 +#define MC_CMD_POLL_BIST_PASSED 2 +#define MC_CMD_POLL_BIST_FAILED 3 +#define MC_CMD_POLL_BIST_TIMEOUT 4 +#define MC_CMD_POLL_BIST_OUT_PRIVATE_OFST 4 + +/* MC_CMD_PHY_SPI: (variadic in, variadic out) + * Read/Write/Erase the PHY SPI device + * + * Locks required: PHY_LOCK + * Return code: 0, ETIME, EINVAL, EACCES (if PHY_LOCK is not held) + */ +#define MC_CMD_PHY_SPI 0x27 +#define MC_CMD_PHY_SPI_IN_LEN(_write_bytes) (12 + (_write_bytes)) +#define MC_CMD_PHY_SPI_IN_ARGS_OFST 0 +#define MC_CMD_PHY_SPI_IN_ARGS_ADDR_OFST 0 +#define MC_CMD_PHY_SPI_IN_ARGS_READ_BYTES_OFST 4 +#define MC_CMD_PHY_SPI_IN_ARGS_ERASE_ALL_OFST 8 +/* Data to write here */ +#define MC_CMD_PHY_SPI_IN_WRITE_BUFFER_OFSET 12 +#define MC_CMD_PHY_SPI_OUT_LEN(_read_bytes) (_read_bytes) +/* Data read here */ +#define MC_CMD_PHY_SPI_OUT_READ_BUFFER_OFST 0 + + +/* MC_CMD_GET_LOOPBACK_MODES: + * Returns a bitmask of loopback modes evailable at each speed. + * + * Locks required: None + * Return code: 0 + */ +#define MC_CMD_GET_LOOPBACK_MODES 0x28 +#define MC_CMD_GET_LOOPBACK_MODES_IN_LEN 0 +#define MC_CMD_GET_LOOPBACK_MODES_OUT_LEN 32 +#define MC_CMD_GET_LOOPBACK_MODES_100M_OFST 0 +#define MC_CMD_GET_LOOPBACK_MODES_1G_OFST 8 +#define MC_CMD_GET_LOOPBACK_MODES_10G_OFST 16 +#define MC_CMD_GET_LOOPBACK_MODES_SUGGESTED_OFST 24 + +/* Flow control enumeration */ +#define MC_CMD_FCNTL_OFF 0 +#define MC_CMD_FCNTL_RESPOND 1 +#define MC_CMD_FCNTL_BIDIR 2 +/* Auto - Use what the link has autonegotiated + * - The driver should modify the advertised capabilities via SET_LINK.CAP + * to control the negotiated flow control mode. + * - Can only be set if the PHY supports PAUSE+ASYM capabilities + * - Never returned by GET_LINK as the value programmed into the MAC + */ +#define MC_CMD_FCNTL_AUTO 3 + +/* Generic mac fault bitmask */ +#define MC_CMD_MAC_FAULT_XGMII_LOCAL_LBN 0 +#define MC_CMD_MAC_FAULT_XGMII_LOCAL_WIDTH 1 +#define MC_CMD_MAC_FAULT_XGMII_REMOTE_LBN 1 +#define MC_CMD_MAC_FAULT_XGMII_REMOTE_WIDTH 1 +#define MC_CMD_MAC_FAULT_SGMII_REMOTE_LBN 2 +#define MC_CMD_MAC_FAULT_SGMII_REMOTE_WIDTH 1 + +/* MC_CMD_GET_LINK: + * Read the unified MAC/PHY link state + * + * Locks required: None + * Return code: 0, ETIME + */ +#define MC_CMD_GET_LINK 0x29 +#define MC_CMD_GET_LINK_IN_LEN 0 +#define MC_CMD_GET_LINK_OUT_LEN 28 +/* near-side and link-partner advertised capabilities */ +#define MC_CMD_GET_LINK_OUT_CAP_OFST 0 +#define MC_CMD_GET_LINK_OUT_LP_CAP_OFST 4 +/* Autonegotiated speed in mbit/s. The link may still be down + * even if this reads non-zero */ +#define MC_CMD_GET_LINK_OUT_LINK_SPEED_OFST 8 +#define MC_CMD_GET_LINK_OUT_LOOPBACK_MODE_OFST 12 +#define MC_CMD_GET_LINK_OUT_FLAGS_OFST 16 +/* Whether we have overall link up */ +#define MC_CMD_GET_LINK_LINK_UP_LBN 0 +#define MC_CMD_GET_LINK_LINK_UP_WIDTH 1 +#define MC_CMD_GET_LINK_FULL_DUPLEX_LBN 1 +#define MC_CMD_GET_LINK_FULL_DUPLEX_WIDTH 1 +/* Whether we have link at the layers provided by the BPX */ +#define MC_CMD_GET_LINK_BPX_LINK_LBN 2 +#define MC_CMD_GET_LINK_BPX_LINK_WIDTH 1 +/* Whether the PHY has external link */ +#define MC_CMD_GET_LINK_PHY_LINK_LBN 3 +#define MC_CMD_GET_LINK_PHY_LINK_WIDTH 1 +#define MC_CMD_GET_LINK_OUT_FCNTL_OFST 20 +#define MC_CMD_GET_LINK_OUT_MAC_FAULT_OFST 24 + +/* MC_CMD_SET_LINK: + * Write the unified MAC/PHY link configuration + * + * A loopback speed of "0" is supported, and means + * (choose any available speed) + * + * Locks required: None + * Return code: 0, EINVAL, ETIME + */ +#define MC_CMD_SET_LINK 0x2a +#define MC_CMD_SET_LINK_IN_LEN 16 +#define MC_CMD_SET_LINK_IN_CAP_OFST 0 +#define MC_CMD_SET_LINK_IN_FLAGS_OFST 4 +#define MC_CMD_SET_LINK_LOWPOWER_LBN 0 +#define MC_CMD_SET_LINK_LOWPOWER_WIDTH 1 +#define MC_CMD_SET_LINK_POWEROFF_LBN 1 +#define MC_CMD_SET_LINK_POWEROFF_WIDTH 1 +#define MC_CMD_SET_LINK_TXDIS_LBN 2 +#define MC_CMD_SET_LINK_TXDIS_WIDTH 1 +#define MC_CMD_SET_LINK_IN_LOOPBACK_MODE_OFST 8 +#define MC_CMD_SET_LINK_IN_LOOPBACK_SPEED_OFST 12 +#define MC_CMD_SET_LINK_OUT_LEN 0 + +/* MC_CMD_SET_ID_LED: + * Set indentification LED state + * + * Locks required: None + * Return code: 0, EINVAL + */ +#define MC_CMD_SET_ID_LED 0x2b +#define MC_CMD_SET_ID_LED_IN_LEN 4 +#define MC_CMD_SET_ID_LED_IN_STATE_OFST 0 +#define MC_CMD_LED_OFF 0 +#define MC_CMD_LED_ON 1 +#define MC_CMD_LED_DEFAULT 2 +#define MC_CMD_SET_ID_LED_OUT_LEN 0 + +/* MC_CMD_SET_MAC: + * Set MAC configuration + * + * The MTU is the MTU programmed directly into the XMAC/GMAC + * (inclusive of EtherII, VLAN, bug16011 padding) + * + * Locks required: None + * Return code: 0, EINVAL + */ +#define MC_CMD_SET_MAC 0x2c +#define MC_CMD_SET_MAC_IN_LEN 24 +#define MC_CMD_SET_MAC_IN_MTU_OFST 0 +#define MC_CMD_SET_MAC_IN_DRAIN_OFST 4 +#define MC_CMD_SET_MAC_IN_ADDR_OFST 8 +#define MC_CMD_SET_MAC_IN_REJECT_OFST 16 +#define MC_CMD_SET_MAC_IN_REJECT_UNCST_LBN 0 +#define MC_CMD_SET_MAC_IN_REJECT_UNCST_WIDTH 1 +#define MC_CMD_SET_MAC_IN_REJECT_BRDCST_LBN 1 +#define MC_CMD_SET_MAC_IN_REJECT_BRDCST_WIDTH 1 +#define MC_CMD_SET_MAC_IN_FCNTL_OFST 20 +#define MC_CMD_SET_MAC_OUT_LEN 0 + +/* MC_CMD_PHY_STATS: + * Get generic PHY statistics + * + * This call returns the statistics for a generic PHY, by direct DMA + * into host memory, in a sparse array (indexed by the enumerate). + * Each value is represented by a 32bit number. + * + * Locks required: None + * Returns: 0, ETIME + * Response methods: shared memory, event + */ +#define MC_CMD_PHY_STATS 0x2d +#define MC_CMD_PHY_STATS_IN_LEN 8 +#define MC_CMD_PHY_STATS_IN_DMA_ADDR_LO_OFST 0 +#define MC_CMD_PHY_STATS_IN_DMA_ADDR_HI_OFST 4 +#define MC_CMD_PHY_STATS_OUT_LEN 0 + +/* Unified MAC statistics enumeration */ +#define MC_CMD_MAC_GENERATION_START 0 +#define MC_CMD_MAC_TX_PKTS 1 +#define MC_CMD_MAC_TX_PAUSE_PKTS 2 +#define MC_CMD_MAC_TX_CONTROL_PKTS 3 +#define MC_CMD_MAC_TX_UNICAST_PKTS 4 +#define MC_CMD_MAC_TX_MULTICAST_PKTS 5 +#define MC_CMD_MAC_TX_BROADCAST_PKTS 6 +#define MC_CMD_MAC_TX_BYTES 7 +#define MC_CMD_MAC_TX_BAD_BYTES 8 +#define MC_CMD_MAC_TX_LT64_PKTS 9 +#define MC_CMD_MAC_TX_64_PKTS 10 +#define MC_CMD_MAC_TX_65_TO_127_PKTS 11 +#define MC_CMD_MAC_TX_128_TO_255_PKTS 12 +#define MC_CMD_MAC_TX_256_TO_511_PKTS 13 +#define MC_CMD_MAC_TX_512_TO_1023_PKTS 14 +#define MC_CMD_MAC_TX_1024_TO_15XX_PKTS 15 +#define MC_CMD_MAC_TX_15XX_TO_JUMBO_PKTS 16 +#define MC_CMD_MAC_TX_GTJUMBO_PKTS 17 +#define MC_CMD_MAC_TX_BAD_FCS_PKTS 18 +#define MC_CMD_MAC_TX_SINGLE_COLLISION_PKTS 19 +#define MC_CMD_MAC_TX_MULTIPLE_COLLISION_PKTS 20 +#define MC_CMD_MAC_TX_EXCESSIVE_COLLISION_PKTS 21 +#define MC_CMD_MAC_TX_LATE_COLLISION_PKTS 22 +#define MC_CMD_MAC_TX_DEFERRED_PKTS 23 +#define MC_CMD_MAC_TX_EXCESSIVE_DEFERRED_PKTS 24 +#define MC_CMD_MAC_TX_NON_TCPUDP_PKTS 25 +#define MC_CMD_MAC_TX_MAC_SRC_ERR_PKTS 26 +#define MC_CMD_MAC_TX_IP_SRC_ERR_PKTS 27 +#define MC_CMD_MAC_RX_PKTS 28 +#define MC_CMD_MAC_RX_PAUSE_PKTS 29 +#define MC_CMD_MAC_RX_GOOD_PKTS 30 +#define MC_CMD_MAC_RX_CONTROL_PKTS 31 +#define MC_CMD_MAC_RX_UNICAST_PKTS 32 +#define MC_CMD_MAC_RX_MULTICAST_PKTS 33 +#define MC_CMD_MAC_RX_BROADCAST_PKTS 34 +#define MC_CMD_MAC_RX_BYTES 35 +#define MC_CMD_MAC_RX_BAD_BYTES 36 +#define MC_CMD_MAC_RX_64_PKTS 37 +#define MC_CMD_MAC_RX_65_TO_127_PKTS 38 +#define MC_CMD_MAC_RX_128_TO_255_PKTS 39 +#define MC_CMD_MAC_RX_256_TO_511_PKTS 40 +#define MC_CMD_MAC_RX_512_TO_1023_PKTS 41 +#define MC_CMD_MAC_RX_1024_TO_15XX_PKTS 42 +#define MC_CMD_MAC_RX_15XX_TO_JUMBO_PKTS 43 +#define MC_CMD_MAC_RX_GTJUMBO_PKTS 44 +#define MC_CMD_MAC_RX_UNDERSIZE_PKTS 45 +#define MC_CMD_MAC_RX_BAD_FCS_PKTS 46 +#define MC_CMD_MAC_RX_OVERFLOW_PKTS 47 +#define MC_CMD_MAC_RX_FALSE_CARRIER_PKTS 48 +#define MC_CMD_MAC_RX_SYMBOL_ERROR_PKTS 49 +#define MC_CMD_MAC_RX_ALIGN_ERROR_PKTS 50 +#define MC_CMD_MAC_RX_LENGTH_ERROR_PKTS 51 +#define MC_CMD_MAC_RX_INTERNAL_ERROR_PKTS 52 +#define MC_CMD_MAC_RX_JABBER_PKTS 53 +#define MC_CMD_MAC_RX_NODESC_DROPS 54 +#define MC_CMD_MAC_RX_LANES01_CHAR_ERR 55 +#define MC_CMD_MAC_RX_LANES23_CHAR_ERR 56 +#define MC_CMD_MAC_RX_LANES01_DISP_ERR 57 +#define MC_CMD_MAC_RX_LANES23_DISP_ERR 58 +#define MC_CMD_MAC_RX_MATCH_FAULT 59 +/* Insert new members here. */ +#define MC_CMD_MAC_GENERATION_END 60 +#define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1) + +/* MC_CMD_MAC_STATS: + * Get unified GMAC/XMAC statistics + * + * This call returns unified statistics maintained by the MC as it + * switches between the GMAC and XMAC. The MC will write out all + * supported stats. The driver should zero initialise the buffer to + * guarantee consistent results. + * + * Locks required: None + * Returns: 0 + * Response methods: shared memory, event + */ +#define MC_CMD_MAC_STATS 0x2e +#define MC_CMD_MAC_STATS_IN_LEN 16 +#define MC_CMD_MAC_STATS_IN_DMA_ADDR_LO_OFST 0 +#define MC_CMD_MAC_STATS_IN_DMA_ADDR_HI_OFST 4 +#define MC_CMD_MAC_STATS_IN_CMD_OFST 8 +#define MC_CMD_MAC_STATS_CMD_DMA_LBN 0 +#define MC_CMD_MAC_STATS_CMD_DMA_WIDTH 1 +#define MC_CMD_MAC_STATS_CMD_CLEAR_LBN 1 +#define MC_CMD_MAC_STATS_CMD_CLEAR_WIDTH 1 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_LBN 2 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_WIDTH 1 +/* Fields only relevent when PERIODIC_CHANGE is set */ +#define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_LBN 3 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_WIDTH 1 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_LBN 4 +#define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_WIDTH 1 +#define MC_CMD_MAC_STATS_CMD_PERIOD_MS_LBN 16 +#define MC_CMD_MAC_STATS_CMD_PERIOD_MS_WIDTH 16 +#define MC_CMD_MAC_STATS_IN_DMA_LEN_OFST 12 + +#define MC_CMD_MAC_STATS_OUT_LEN 0 + +/* Callisto flags */ +#define MC_CMD_SFT9001_ROBUST_LBN 0 +#define MC_CMD_SFT9001_ROBUST_WIDTH 1 +#define MC_CMD_SFT9001_SHORT_REACH_LBN 1 +#define MC_CMD_SFT9001_SHORT_REACH_WIDTH 1 + +/* MC_CMD_SFT9001_GET: + * Read current callisto specific setting + * + * Locks required: None + * Returns: 0, ETIME + */ +#define MC_CMD_SFT9001_GET 0x30 +#define MC_CMD_SFT9001_GET_IN_LEN 0 +#define MC_CMD_SFT9001_GET_OUT_LEN 4 +#define MC_CMD_SFT9001_GET_OUT_FLAGS_OFST 0 + +/* MC_CMD_SFT9001_SET: + * Write current callisto specific setting + * + * Locks required: None + * Returns: 0, ETIME, EINVAL + */ +#define MC_CMD_SFT9001_SET 0x31 +#define MC_CMD_SFT9001_SET_IN_LEN 4 +#define MC_CMD_SFT9001_SET_IN_FLAGS_OFST 0 +#define MC_CMD_SFT9001_SET_OUT_LEN 0 + + +/* MC_CMD_WOL_FILTER_SET: + * Set a WoL filter + * + * Locks required: None + * Returns: 0, EBUSY, EINVAL, ENOSYS + */ +#define MC_CMD_WOL_FILTER_SET 0x32 +#define MC_CMD_WOL_FILTER_SET_IN_LEN 192 /* 190 rounded up to a word */ +#define MC_CMD_WOL_FILTER_SET_IN_FILTER_MODE_OFST 0 +#define MC_CMD_WOL_FILTER_SET_IN_WOL_TYPE_OFST 4 + +/* There is a union at offset 8, following defines overlap due to + * this */ +#define MC_CMD_WOL_FILTER_SET_IN_DATA_OFST 8 + +#define MC_CMD_WOL_FILTER_SET_IN_MAGIC_MAC_OFST \ + MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + +#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_SRC_IP_OFST \ + MC_CMD_WOL_FILTER_SET_IN_DATA_OFST +#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_DST_IP_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 4) +#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_SRC_PORT_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 8) +#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_DST_PORT_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 10) + +#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_SRC_IP_OFST \ + MC_CMD_WOL_FILTER_SET_IN_DATA_OFST +#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_DST_IP_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 16) +#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_SRC_PORT_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 32) +#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_DST_PORT_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 34) + +#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_MASK_OFST \ + MC_CMD_WOL_FILTER_SET_IN_DATA_OFST +#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 48) +#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LEN_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 176) +#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER3_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 177) +#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER4_OFST \ + (MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 178) + +#define MC_CMD_WOL_FILTER_SET_OUT_LEN 4 +#define MC_CMD_WOL_FILTER_SET_OUT_FILTER_ID_OFST 0 + +/* WOL Filter types enumeration */ +#define MC_CMD_WOL_TYPE_MAGIC 0x0 + /* unused 0x1 */ +#define MC_CMD_WOL_TYPE_WIN_MAGIC 0x2 +#define MC_CMD_WOL_TYPE_IPV4_SYN 0x3 +#define MC_CMD_WOL_TYPE_IPV6_SYN 0x4 +#define MC_CMD_WOL_TYPE_BITMAP 0x5 +#define MC_CMD_WOL_TYPE_MAX 0x6 + +#define MC_CMD_FILTER_MODE_SIMPLE 0x0 +#define MC_CMD_FILTER_MODE_STRUCTURED 0xffffffff + +/* MC_CMD_WOL_FILTER_REMOVE: + * Remove a WoL filter + * + * Locks required: None + * Returns: 0, EINVAL, ENOSYS + */ +#define MC_CMD_WOL_FILTER_REMOVE 0x33 +#define MC_CMD_WOL_FILTER_REMOVE_IN_LEN 4 +#define MC_CMD_WOL_FILTER_REMOVE_IN_FILTER_ID_OFST 0 +#define MC_CMD_WOL_FILTER_REMOVE_OUT_LEN 0 + + +/* MC_CMD_WOL_FILTER_RESET: + * Reset (i.e. remove all) WoL filters + * + * Locks required: None + * Returns: 0, ENOSYS + */ +#define MC_CMD_WOL_FILTER_RESET 0x34 +#define MC_CMD_WOL_FILTER_RESET_IN_LEN 0 +#define MC_CMD_WOL_FILTER_RESET_OUT_LEN 0 + +/* MC_CMD_SET_MCAST_HASH: + * Set the MCASH hash value without otherwise + * reconfiguring the MAC + */ +#define MC_CMD_SET_MCAST_HASH 0x35 +#define MC_CMD_SET_MCAST_HASH_IN_LEN 32 +#define MC_CMD_SET_MCAST_HASH_IN_HASH0_OFST 0 +#define MC_CMD_SET_MCAST_HASH_IN_HASH1_OFST 16 +#define MC_CMD_SET_MCAST_HASH_OUT_LEN 0 + +/* MC_CMD_NVRAM_TYPES: + * Return bitfield indicating available types of virtual NVRAM partitions + * + * Locks required: none + * Returns: 0 + */ +#define MC_CMD_NVRAM_TYPES 0x36 +#define MC_CMD_NVRAM_TYPES_IN_LEN 0 +#define MC_CMD_NVRAM_TYPES_OUT_LEN 4 +#define MC_CMD_NVRAM_TYPES_OUT_TYPES_OFST 0 + +/* Supported NVRAM types */ +#define MC_CMD_NVRAM_TYPE_DISABLED_CALLISTO 0 +#define MC_CMD_NVRAM_TYPE_MC_FW 1 +#define MC_CMD_NVRAM_TYPE_MC_FW_BACKUP 2 +#define MC_CMD_NVRAM_TYPE_STATIC_CFG_PORT0 3 +#define MC_CMD_NVRAM_TYPE_STATIC_CFG_PORT1 4 +#define MC_CMD_NVRAM_TYPE_DYNAMIC_CFG_PORT0 5 +#define MC_CMD_NVRAM_TYPE_DYNAMIC_CFG_PORT1 6 +#define MC_CMD_NVRAM_TYPE_EXP_ROM 7 +#define MC_CMD_NVRAM_TYPE_EXP_ROM_CFG_PORT0 8 +#define MC_CMD_NVRAM_TYPE_EXP_ROM_CFG_PORT1 9 +#define MC_CMD_NVRAM_TYPE_PHY_PORT0 10 +#define MC_CMD_NVRAM_TYPE_PHY_PORT1 11 +#define MC_CMD_NVRAM_TYPE_LOG 12 + +/* MC_CMD_NVRAM_INFO: + * Read info about a virtual NVRAM partition + * + * Locks required: none + * Returns: 0, EINVAL (bad type) + */ +#define MC_CMD_NVRAM_INFO 0x37 +#define MC_CMD_NVRAM_INFO_IN_LEN 4 +#define MC_CMD_NVRAM_INFO_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_INFO_OUT_LEN 24 +#define MC_CMD_NVRAM_INFO_OUT_TYPE_OFST 0 +#define MC_CMD_NVRAM_INFO_OUT_SIZE_OFST 4 +#define MC_CMD_NVRAM_INFO_OUT_ERASESIZE_OFST 8 +#define MC_CMD_NVRAM_INFO_OUT_FLAGS_OFST 12 +#define MC_CMD_NVRAM_PROTECTED_LBN 0 +#define MC_CMD_NVRAM_PROTECTED_WIDTH 1 +#define MC_CMD_NVRAM_INFO_OUT_PHYSDEV_OFST 16 +#define MC_CMD_NVRAM_INFO_OUT_PHYSADDR_OFST 20 + +/* MC_CMD_NVRAM_UPDATE_START: + * Start a group of update operations on a virtual NVRAM partition + * + * Locks required: PHY_LOCK if type==*PHY* + * Returns: 0, EINVAL (bad type), EACCES (if PHY_LOCK required and not held) + */ +#define MC_CMD_NVRAM_UPDATE_START 0x38 +#define MC_CMD_NVRAM_UPDATE_START_IN_LEN 4 +#define MC_CMD_NVRAM_UPDATE_START_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_UPDATE_START_OUT_LEN 0 + +/* MC_CMD_NVRAM_READ: + * Read data from a virtual NVRAM partition + * + * Locks required: PHY_LOCK if type==*PHY* + * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held) + */ +#define MC_CMD_NVRAM_READ 0x39 +#define MC_CMD_NVRAM_READ_IN_LEN 12 +#define MC_CMD_NVRAM_READ_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_READ_IN_OFFSET_OFST 4 +#define MC_CMD_NVRAM_READ_IN_LENGTH_OFST 8 +#define MC_CMD_NVRAM_READ_OUT_LEN(_read_bytes) (_read_bytes) +#define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_OFST 0 + +/* MC_CMD_NVRAM_WRITE: + * Write data to a virtual NVRAM partition + * + * Locks required: PHY_LOCK if type==*PHY* + * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held) + */ +#define MC_CMD_NVRAM_WRITE 0x3a +#define MC_CMD_NVRAM_WRITE_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_WRITE_IN_OFFSET_OFST 4 +#define MC_CMD_NVRAM_WRITE_IN_LENGTH_OFST 8 +#define MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_OFST 12 +#define MC_CMD_NVRAM_WRITE_IN_LEN(_write_bytes) (12 + _write_bytes) +#define MC_CMD_NVRAM_WRITE_OUT_LEN 0 + +/* MC_CMD_NVRAM_ERASE: + * Erase sector(s) from a virtual NVRAM partition + * + * Locks required: PHY_LOCK if type==*PHY* + * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held) + */ +#define MC_CMD_NVRAM_ERASE 0x3b +#define MC_CMD_NVRAM_ERASE_IN_LEN 12 +#define MC_CMD_NVRAM_ERASE_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_ERASE_IN_OFFSET_OFST 4 +#define MC_CMD_NVRAM_ERASE_IN_LENGTH_OFST 8 +#define MC_CMD_NVRAM_ERASE_OUT_LEN 0 + +/* MC_CMD_NVRAM_UPDATE_FINISH: + * Finish a group of update operations on a virtual NVRAM partition + * + * Locks required: PHY_LOCK if type==*PHY* + * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held) + */ +#define MC_CMD_NVRAM_UPDATE_FINISH 0x3c +#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 4 +#define MC_CMD_NVRAM_UPDATE_FINISH_IN_TYPE_OFST 0 +#define MC_CMD_NVRAM_UPDATE_FINISH_OUT_LEN 0 + +/* MC_CMD_REBOOT: + * Reboot the MC. The AFTER_ASSERTION flag is intended to be used + * when the driver notices an assertion failure, to allow two ports to + * both recover (semi-)gracefully. + * + * Locks required: NONE + * Returns: Nothing. You get back a response with ERR=1, DATALEN=0 + */ +#define MC_CMD_REBOOT 0x3d +#define MC_CMD_REBOOT_IN_LEN 4 +#define MC_CMD_REBOOT_IN_FLAGS_OFST 0 +#define MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION 1 +#define MC_CMD_REBOOT_OUT_LEN 0 + +/* MC_CMD_SCHEDINFO: + * Request scheduler info. from the MC. + * + * Locks required: NONE + * Returns: An array of (timeslice,maximum overrun), one for each thread, + * in ascending order of thread address.s + */ +#define MC_CMD_SCHEDINFO 0x3e +#define MC_CMD_SCHEDINFO_IN_LEN 0 + + +/* MC_CMD_SET_REBOOT_MODE: (debug) + * Set the mode for the next MC reboot. + * + * Locks required: NONE + * + * Sets the reboot mode to the specified value. Returns the old mode. + */ +#define MC_CMD_REBOOT_MODE 0x3f +#define MC_CMD_REBOOT_MODE_IN_LEN 4 +#define MC_CMD_REBOOT_MODE_IN_VALUE_OFST 0 +#define MC_CMD_REBOOT_MODE_OUT_LEN 4 +#define MC_CMD_REBOOT_MODE_OUT_VALUE_OFST 0 +#define MC_CMD_REBOOT_MODE_NORMAL 0 +#define MC_CMD_REBOOT_MODE_SNAPPER 3 + +/* MC_CMD_DEBUG_LOG: + * Null request/response command (debug) + * - sequence number is always zero + * - only supported on the UART interface + * (the same set of bytes is delivered as an + * event over PCI) + */ +#define MC_CMD_DEBUG_LOG 0x40 +#define MC_CMD_DEBUG_LOG_IN_LEN 0 +#define MC_CMD_DEBUG_LOG_OUT_LEN 0 + +/* Generic sensor enumeration. Note that a dual port NIC + * will EITHER expose PHY_COMMON_TEMP OR PHY0_TEMP and + * PHY1_TEMP depending on whether there is a single sensor + * in the vicinity of the two port, or one per port. + */ +#define MC_CMD_SENSOR_CONTROLLER_TEMP 0 /* degC */ +#define MC_CMD_SENSOR_PHY_COMMON_TEMP 1 /* degC */ +#define MC_CMD_SENSOR_CONTROLLER_COOLING 2 /* bool */ +#define MC_CMD_SENSOR_PHY0_TEMP 3 /* degC */ +#define MC_CMD_SENSOR_PHY0_COOLING 4 /* bool */ +#define MC_CMD_SENSOR_PHY1_TEMP 5 /* degC */ +#define MC_CMD_SENSOR_PHY1_COOLING 6 /* bool */ +#define MC_CMD_SENSOR_IN_1V0 7 /* mV */ +#define MC_CMD_SENSOR_IN_1V2 8 /* mV */ +#define MC_CMD_SENSOR_IN_1V8 9 /* mV */ +#define MC_CMD_SENSOR_IN_2V5 10 /* mV */ +#define MC_CMD_SENSOR_IN_3V3 11 /* mV */ +#define MC_CMD_SENSOR_IN_12V0 12 /* mV */ + + +/* Sensor state */ +#define MC_CMD_SENSOR_STATE_OK 0 +#define MC_CMD_SENSOR_STATE_WARNING 1 +#define MC_CMD_SENSOR_STATE_FATAL 2 +#define MC_CMD_SENSOR_STATE_BROKEN 3 + +/* MC_CMD_SENSOR_INFO: + * Returns information about every available sensor. + * + * Each sensor has a single (16bit) value, and a corresponding state. + * The mapping between value and sensor is nominally determined by the + * MC, but in practise is implemented as zero (BROKEN), one (TEMPERATURE), + * or two (VOLTAGE) ranges per sensor per state. + * + * This call returns a mask (32bit) of the sensors that are supported + * by this platform, then an array (indexed by MC_CMD_SENSOR) of byte + * offsets to the per-sensor arrays. Each sensor array has four 16bit + * numbers, min1, max1, min2, max2. + * + * Locks required: None + * Returns: 0 + */ +#define MC_CMD_SENSOR_INFO 0x41 +#define MC_CMD_SENSOR_INFO_IN_LEN 0 +#define MC_CMD_SENSOR_INFO_OUT_MASK_OFST 0 +#define MC_CMD_SENSOR_INFO_OUT_OFFSET_OFST(_x) \ + (4 + (_x)) +#define MC_CMD_SENSOR_INFO_OUT_MIN1_OFST(_ofst) \ + ((_ofst) + 0) +#define MC_CMD_SENSOR_INFO_OUT_MAX1_OFST(_ofst) \ + ((_ofst) + 2) +#define MC_CMD_SENSOR_INFO_OUT_MIN2_OFST(_ofst) \ + ((_ofst) + 4) +#define MC_CMD_SENSOR_INFO_OUT_MAX2_OFST(_ofst) \ + ((_ofst) + 6) + +/* MC_CMD_READ_SENSORS + * Returns the current (value, state) for each sensor + * + * Returns the current (value, state) [each 16bit] of each sensor supported by + * this board, by DMA'ing a sparse array (indexed by the sensor type) into host + * memory. + * + * The MC will send a SENSOREVT event every time any sensor changes state. The + * driver is responsible for ensuring that it doesn't miss any events. The board + * will function normally if all sensors are in STATE_OK or state_WARNING. + * Otherwise the board should not be expected to function. + */ +#define MC_CMD_READ_SENSORS 0x42 +#define MC_CMD_READ_SENSORS_IN_LEN 8 +#define MC_CMD_READ_SENSORS_IN_DMA_ADDR_LO_OFST 0 +#define MC_CMD_READ_SENSORS_IN_DMA_ADDR_HI_OFST 4 +#define MC_CMD_READ_SENSORS_OUT_LEN 0 + + +/* MC_CMD_GET_PHY_STATE: + * Report current state of PHY. A "zombie" PHY is a PHY that has failed to + * boot (e.g. due to missing or corrupted firmware). + * + * Locks required: None + * Return code: 0 + */ +#define MC_CMD_GET_PHY_STATE 0x43 + +#define MC_CMD_GET_PHY_STATE_IN_LEN 0 +#define MC_CMD_GET_PHY_STATE_OUT_LEN 4 +#define MC_CMD_GET_PHY_STATE_STATE_OFST 0 +/* PHY state enumeration: */ +#define MC_CMD_PHY_STATE_OK 1 +#define MC_CMD_PHY_STATE_ZOMBIE 2 + + +/* 802.1Qbb control. 8 Tx queues that map to priorities 0 - 7. Use all 1s to + * disable 802.Qbb for a given priority. */ +#define MC_CMD_SETUP_8021QBB 0x44 +#define MC_CMD_SETUP_8021QBB_IN_LEN 32 +#define MC_CMD_SETUP_8021QBB_OUT_LEN 0 +#define MC_CMD_SETUP_8021QBB_IN_TXQS_OFFST 0 + + +/* MC_CMD_WOL_FILTER_GET: + * Retrieve ID of any WoL filters + * + * Locks required: None + * Returns: 0, ENOSYS + */ +#define MC_CMD_WOL_FILTER_GET 0x45 +#define MC_CMD_WOL_FILTER_GET_IN_LEN 0 +#define MC_CMD_WOL_FILTER_GET_OUT_LEN 4 +#define MC_CMD_WOL_FILTER_GET_OUT_FILTER_ID_OFST 0 + + +/* MC_CMD_ADD_LIGHTSOUT_OFFLOAD: + * Offload a protocol to NIC for lights-out state + * + * Locks required: None + * Returns: 0, ENOSYS + */ +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD 0x46 + +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LEN 16 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_OFST 0 + +/* There is a union at offset 4, following defines overlap due to + * this */ +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_OFST 4 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARPMAC_OFST 4 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARPIP_OFST 10 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_NSMAC_OFST 4 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_NSSNIPV6_OFST 10 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_NSIPV6_OFST 26 + +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_OUT_LEN 4 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_OUT_FILTER_ID_OFST 0 + + +/* MC_CMD_REMOVE_LIGHTSOUT_PROTOCOL_OFFLOAD: + * Offload a protocol to NIC for lights-out state + * + * Locks required: None + * Returns: 0, ENOSYS + */ +#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD 0x47 +#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_IN_LEN 8 +#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_OUT_LEN 0 + +#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_OFST 0 +#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_IN_FILTER_ID_OFST 4 + +/* Lights-out offload protocols enumeration */ +#define MC_CMD_LIGHTSOUT_OFFLOAD_PROTOCOL_ARP 0x1 +#define MC_CMD_LIGHTSOUT_OFFLOAD_PROTOCOL_NS 0x2 + + +/* MC_CMD_MAC_RESET_RESTORE: + * Restore MAC after block reset + * + * Locks required: None + * Returns: 0 + */ + +#define MC_CMD_MAC_RESET_RESTORE 0x48 +#define MC_CMD_MAC_RESET_RESTORE_IN_LEN 0 +#define MC_CMD_MAC_RESET_RESTORE_OUT_LEN 0 + +#endif /* MCDI_PCOL_H */