forked from Minki/linux
ARM: dts: at91: move isi definition to at91sam9g25ek
The ISI is only present on the at91sam9g25, move the definition to the at91sam9g25ek board dts to avoid warnings. Solves the following warning for other 9x5ek boards: Warning (unit_address_vs_reg): Node /ahb/apb/isi@f8048000 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
parent
e152e3f7f4
commit
efedc4893b
@ -26,7 +26,24 @@
|
||||
|
||||
i2c0: i2c@f8010000 {
|
||||
ov2640: camera@0x30 {
|
||||
compatible = "ovti,ov2640";
|
||||
reg = <0x30>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
|
||||
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
|
||||
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
|
||||
clocks = <&pck0>;
|
||||
clock-names = "xvclk";
|
||||
assigned-clocks = <&pck0>;
|
||||
assigned-clock-rates = <25000000>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
ov2640_0: endpoint {
|
||||
remote-endpoint = <&isi_0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -37,6 +54,14 @@
|
||||
|
||||
isi: isi@f8048000 {
|
||||
status = "okay";
|
||||
port {
|
||||
isi_0: endpoint@0 {
|
||||
remote-endpoint = <&ov2640_0>;
|
||||
bus-width = <8>;
|
||||
vsync-active = <1>;
|
||||
hsync-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -60,18 +60,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
isi: isi@f8048000 {
|
||||
status = "disabled";
|
||||
port {
|
||||
isi_0: endpoint@0 {
|
||||
remote-endpoint = <&ov2640_0>;
|
||||
bus-width = <8>;
|
||||
vsync-active = <1>;
|
||||
hsync-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@f8010000 {
|
||||
status = "okay";
|
||||
|
||||
@ -79,27 +67,6 @@
|
||||
compatible = "wm8731";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
|
||||
ov2640: camera@0x30 {
|
||||
compatible = "ovti,ov2640";
|
||||
reg = <0x30>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
|
||||
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
|
||||
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
|
||||
clocks = <&pck0>;
|
||||
clock-names = "xvclk";
|
||||
assigned-clocks = <&pck0>;
|
||||
assigned-clock-rates = <25000000>;
|
||||
status = "disabled";
|
||||
|
||||
port {
|
||||
ov2640_0: endpoint {
|
||||
remote-endpoint = <&isi_0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
|
Loading…
Reference in New Issue
Block a user