From 1da8779c002985278ba58722de579fcae71e4a81 Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Fri, 23 Jul 2021 15:28:08 +0200 Subject: [PATCH 1/9] ARM: dts: stm32: add STM32MP13 SoCs support Add initial support of STM32MP13 family. The STM32MP13 SoC diversity is composed by: -STM32MP131: -core: 1*CA7, 17*TIMERS, 5*LPTIMERS, DMA/MDMA/DMAMUX -storage: 3*SDMCC, 1*QSPI, FMC -com: USB (OHCI/EHCI, OTG), 5*I2C, 5*SPI/I2S, 8*U(S)ART -audio: 2*SAI -network: 1*ETH(GMAC) -STM32MP133: STM32MP131 + 2*CAN, ETH2(GMAC), ADC1 -STM32MP135: STM32MP133 + DCMIPP, LTDC A second diversity layer exists for security features: -STM32MP13xY, "Y" gives information: -Y = A/D means no cryp IP and no secure boot. -Y = C/F means cryp IP + secure boot. This commit adds basic peripheral. Signed-off-by: Alexandre Torgue Acked-by: Arnd Bergmann --- arch/arm/boot/dts/stm32mp131.dtsi | 283 +++++++++++++++++++++++++++++ arch/arm/boot/dts/stm32mp133.dtsi | 37 ++++ arch/arm/boot/dts/stm32mp135.dtsi | 12 ++ arch/arm/boot/dts/stm32mp13xc.dtsi | 17 ++ arch/arm/boot/dts/stm32mp13xf.dtsi | 17 ++ 5 files changed, 366 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp131.dtsi create mode 100644 arch/arm/boot/dts/stm32mp133.dtsi create mode 100644 arch/arm/boot/dts/stm32mp135.dtsi create mode 100644 arch/arm/boot/dts/stm32mp13xc.dtsi create mode 100644 arch/arm/boot/dts/stm32mp13xf.dtsi diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi new file mode 100644 index 000000000000..86126dc0d898 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + clocks { + clk_axi: clk-axi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <266500000>; + }; + + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_pclk3: clk-pclk3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104438965>; + }; + + clk_pclk4: clk-pclk4 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <133250000>; + }; + + clk_pll4_p: clk-pll4_p { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + clk_pll4_r: clk-pll4_r { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <99000000>; + }; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + interrupt-parent = <&intc>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts = ; + clocks = <&clk_hsi>; + status = "disabled"; + }; + + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + clocks = <&clk_pclk3>; + }; + + sdmmc1: mmc@58005000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00253180>; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&clk_pll4_p>; + clock-names = "apb_pclk"; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&clk_pclk4>, <&clk_lsi>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + + bsec: efuse@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + part_number_otp: part_number_otp@4 { + reg = <0x4 0x2>; + }; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp135-pinctrl"; + ranges = <0 0x50002000 0x8400>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOH"; + ngpios = <15>; + gpio-ranges = <&pinctrl 0 112 15>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOI"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 128 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi new file mode 100644 index 000000000000..0fb1386257cf --- /dev/null +++ b/arch/arm/boot/dts/stm32mp133.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp131.dtsi" + +/ { + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp135.dtsi b/arch/arm/boot/dts/stm32mp135.dtsi new file mode 100644 index 000000000000..abf2acd37b4e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp135.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp133.dtsi" + +/ { + soc { + }; +}; diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi new file mode 100644 index 000000000000..fa6889e30591 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = ; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi new file mode 100644 index 000000000000..fa6889e30591 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = ; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; From 396e4168c527c1cf77336fc160e343b7db55f952 Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Fri, 23 Jul 2021 15:28:09 +0200 Subject: [PATCH 2/9] dt-bindings: stm32: document stm32mp135f-dk board Add new entry for stm32mp135f-dk board. Signed-off-by: Alexandre Torgue Acked-by: Arnd Bergmann Acked-by: Rob Herring --- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 9a77ab74be99..9ac7da01c6c3 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -55,6 +55,10 @@ properties: - enum: - st,stm32h750i-art-pi - const: st,stm32h750 + - items: + - enum: + - st,stm32mp135f-dk + - const: st,stm32mp135 - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box From 7e9e2d18c02cf7632c8ebcd5b1d245abb4e54ca8 Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Fri, 23 Jul 2021 15:28:10 +0200 Subject: [PATCH 3/9] ARM: dts: stm32: add initial support of stm32mp135f-dk board Add support of stm32mp135f discovery board (part number: STM32MP135F-DK). It embeds a STM32MP135F SOC with 512 MB of DDR3. Several connections are available on this board: 4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ... Only SD card, uart4 (console) and watchdog IPs are enabled in this commit. Signed-off-by: Alexandre Torgue Acked-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 64 ++++++++++++++++++++++++ arch/arm/boot/dts/stm32mp135f-dk.dts | 56 +++++++++++++++++++++ 3 files changed, 121 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32mp135f-dk.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e0934180724..f5b21007d0df 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1113,6 +1113,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp135f-dk.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi new file mode 100644 index 000000000000..069f95f2b628 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue + */ +#include + +&pinctrl { + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + ; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts new file mode 100644 index 000000000000..7e96d9e36217 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP135F-DK Discovery Board"; + compatible = "st,stm32mp135f-dk", "st,stm32mp135"; + + aliases { + serial0 = &uart4; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + vdd_sd: vdd-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + broken-cd; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; From 2012579b31293d0a8cf2024e9dab66810bf1a15e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 9 Aug 2021 14:13:24 +0200 Subject: [PATCH 4/9] ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM, which causes additional signal delay. At 108 MHz, this delay triggers a sporadic issue where the first bit of RX data is not received by the QSPI controller. There are two options of addressing this problem, either by using the DLYB block to compensate the extra delay, or by reducing the QSPI bus clock frequency. The former requires calibration and that is overly complex, so opt for the second option. Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 2b0ac605549d..44ecc4708587 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -202,7 +202,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; + spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; }; From 5ac05598aa2026d4d5ad3e87115c42a665bbf595 Mon Sep 17 00:00:00 2001 From: Grzegorz Szymaszek Date: Thu, 26 Aug 2021 16:45:43 +0200 Subject: [PATCH 5/9] ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The DCMI pins used on this output are defined in the pin state definition &pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit 02814a41529a55dbfb9fbb2a3728e78e70646ea6). Set these pins as the default pinctrl of the DCMI peripheral in the board device tree. The pins are not used for any other purpose, so it seems safe to assume most users will not need to override (delete) what this patch provides. status defaults to "disabled", so the peripheral will not be unnecessarily started. And the users who actually intend to make use of a camera on the DVP port will have this little part of the configuration ready. Signed-off-by: Grzegorz Szymaszek Reviewed-by: Ahmad Fatoum Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-odyssey.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts index be1dd5e9e744..554f5d3bcdc3 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -22,6 +22,12 @@ }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_b>; + pinctrl-1 = <&dcmi_sleep_pins_b>; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; From 3d4fb3d4c431f45272bf8c308d3cbe030817f046 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 21 Sep 2021 15:34:49 +0200 Subject: [PATCH 6/9] ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get lost currently, so fix the IRQ type. Fixes: 83686162c0eb ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx") Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 899bfe04aeb9..48beed0f1f30 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -249,7 +249,7 @@ stusb1600@28 { compatible = "st,stusb1600"; reg = <0x28>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpioi>; pinctrl-names = "default"; pinctrl-0 = <&stusb1600_pins_a>; From 6f87a74d31277f0896dcf8c0850ec14bde03c423 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Fri, 24 Sep 2021 18:02:21 +0200 Subject: [PATCH 7/9] ARM: dts: stm32: fix SAI sub nodes register range The STM32 SAI subblocks registers offsets are in the range 0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR). The corresponding range length is 0x20 instead of 0x1c. Change reg property accordingly. Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c") Signed-off-by: Olivier Moysan Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index bd289bf5d269..6992a4b0ba79 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -824,7 +824,7 @@ #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1c>; + reg = <0x4 0x20>; clocks = <&rcc SAI1_K>; clock-names = "sai_ck"; dmas = <&dmamux1 87 0x400 0x01>; @@ -834,7 +834,7 @@ sai1b: audio-controller@4400a024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI1_K>; clock-names = "sai_ck"; dmas = <&dmamux1 88 0x400 0x01>; @@ -855,7 +855,7 @@ sai2a: audio-controller@4400b004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1c>; + reg = <0x4 0x20>; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; dmas = <&dmamux1 89 0x400 0x01>; @@ -865,7 +865,7 @@ sai2b: audio-controller@4400b024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; dmas = <&dmamux1 90 0x400 0x01>; @@ -886,7 +886,7 @@ sai3a: audio-controller@4400c004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x1c>; + reg = <0x04 0x20>; clocks = <&rcc SAI3_K>; clock-names = "sai_ck"; dmas = <&dmamux1 113 0x400 0x01>; @@ -896,7 +896,7 @@ sai3b: audio-controller@4400c024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI3_K>; clock-names = "sai_ck"; dmas = <&dmamux1 114 0x400 0x01>; @@ -1271,7 +1271,7 @@ sai4a: audio-controller@50027004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x1c>; + reg = <0x04 0x20>; clocks = <&rcc SAI4_K>; clock-names = "sai_ck"; dmas = <&dmamux1 99 0x400 0x01>; @@ -1281,7 +1281,7 @@ sai4b: audio-controller@50027024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI4_K>; clock-names = "sai_ck"; dmas = <&dmamux1 100 0x400 0x01>; From 1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Mon, 4 Oct 2021 11:03:04 +0200 Subject: [PATCH 8/9] ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15 Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15. Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2. Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2 Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15") Signed-off-by: Olivier Moysan Reviewed-by: Marek Vasut Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 5b60ecbd718f..2ebafe27a865 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1179,7 +1179,7 @@ }; }; - sai2a_pins_c: sai2a-4 { + sai2a_pins_c: sai2a-2 { pins { pinmux = , /* SAI2_SCK_A */ , /* SAI2_SD_A */ @@ -1190,7 +1190,7 @@ }; }; - sai2a_sleep_pins_c: sai2a-5 { + sai2a_sleep_pins_c: sai2a-2 { pins { pinmux = , /* SAI2_SCK_A */ , /* SAI2_SD_A */ @@ -1235,14 +1235,14 @@ }; }; - sai2b_pins_c: sai2a-4 { + sai2b_pins_c: sai2b-2 { pins1 { pinmux = ; /* SAI2_SD_B */ bias-disable; }; }; - sai2b_sleep_pins_c: sai2a-sleep-5 { + sai2b_sleep_pins_c: sai2b-sleep-2 { pins { pinmux = ; /* SAI2_SD_B */ }; From db7be2cb87ae65e2d033a9f61f7fb94bce505177 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Wed, 6 Oct 2021 11:53:55 +0200 Subject: [PATCH 9/9] ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151 Referring to the note under USBH reset and clocks chapter of RM0436, "In order to access USBH_OHCI registers it is necessary to activate the USB clocks by enabling the PLL controlled by USBPHYC" (ck_usbo_48m). The point is, when USBPHYC PLL is not enabled, OHCI register access freezes the resume from STANDBY. It is the case when dual USBH is enabled, instead of OTG + single USBH. When OTG is probed, as ck_usbo_48m is USBO clock parent, then USBPHYC PLL is enabled and OHCI register access is OK. This patch adds ck_usbo_48m (provided by USBPHYC PLL) as clock of USBH OHCI, thus USBPHYC PLL will be enabled and OHCI register access will be OK. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 6992a4b0ba79..f693a7d24247 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1452,7 +1452,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&rcc USBH>, <&usbphyc>; resets = <&rcc USBH_R>; interrupts = ; status = "disabled";