pinctrl-msm: Support output-{high,low} configuration

Add support for configuring pins as output with value as from the
pinconf-generic interface.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Bjorn Andersson 2014-02-04 19:55:31 -08:00 committed by Linus Walleij
parent 58ffe7a025
commit ed118a5fd9

View File

@ -228,6 +228,11 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
*bit = g->drv_bit;
*mask = 7;
break;
case PIN_CONFIG_OUTPUT:
*reg = g->ctl_reg;
*bit = g->oe_bit;
*mask = 1;
break;
default:
dev_err(pctrl->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
@ -301,6 +306,14 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_DRIVE_STRENGTH:
arg = msm_regval_to_drive[arg];
break;
case PIN_CONFIG_OUTPUT:
/* Pin is not output */
if (!arg)
return -EINVAL;
val = readl(pctrl->regs + g->io_reg);
arg = !!(val & BIT(g->in_bit));
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
param);
@ -357,6 +370,20 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
else
arg = msm_drive_to_regval[arg];
break;
case PIN_CONFIG_OUTPUT:
/* set output value */
spin_lock_irqsave(&pctrl->lock, flags);
val = readl(pctrl->regs + g->io_reg);
if (arg)
val |= BIT(g->out_bit);
else
val &= ~BIT(g->out_bit);
writel(val, pctrl->regs + g->io_reg);
spin_unlock_irqrestore(&pctrl->lock, flags);
/* enable output */
arg = 1;
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
param);