leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

pinctrl: starfive: Add pinctrl driver for StarFive SoCs

Browse Source 
Add a combined pinctrl and GPIO driver for the JH7100 RISC-V SoC by
StarFive Ltd. This is a test chip for their upcoming JH7110 SoC, which
is said to feature only minor changes to these pinctrl/GPIO parts.

For each "GPIO" there are two registers for configuring the output and
output enable signals which may come from other peripherals. Among these
are two special signals that are constant 0 and constant 1 respectively.
Controlling the GPIOs from software is done by choosing one of these
signals. In other words the same registers are used for both pin muxing
and controlling the GPIOs, which makes it easier to combine the pinctrl
and GPIO driver in one.

I wrote the pinconf and pinmux parts, but the GPIO part of the code is
based on the GPIO driver in the vendor tree written by Huan Feng with
cleanups and fixes by Drew and me.

Datasheet: https://github.com/starfive-tech/JH7100_Docs/blob/main/JH7100%20Data%20Sheet%20V01.01.04-EN%20(4-21-2021).pdf
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Co-developed-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
This commit is contained in:
Emil Renner Berthing 2021-07-06 20:19:06 +02:00
parent 7431b391df
commit ec648f6b76
4 changed files with 1380 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
MAINTAINERS
View File

@ -18137,6 +18137,14 @@ F: Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
F: drivers/clk/starfive/clk-starfive-jh7100.c
F: include/dt-bindings/clock/starfive-jh7100.h
STARFIVE JH7100 PINCTRL DRIVER
M: Emil Renner Berthing <kernel@esmil.dk>
L: linux-gpio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
F: drivers/pinctrl/pinctrl-starfive.c
F: include/dt-bindings/pinctrl/pinctrl-starfive.h
STARFIVE JH7100 RESET CONTROLLER DRIVER
M: Emil Renner Berthing <kernel@esmil.dk>
S: Maintained

17
drivers/pinctrl/Kconfig
View File

@ -281,6 +281,23 @@ config PINCTRL_ST
select PINCONF
select GPIOLIB_IRQCHIP
config PINCTRL_STARFIVE
tristate "Pinctrl and GPIO driver for the StarFive JH7100 SoC"
depends on SOC_STARFIVE || COMPILE_TEST
depends on OF
default SOC_STARFIVE
select GENERIC_PINCTRL_GROUPS
select GENERIC_PINMUX_FUNCTIONS
select GENERIC_PINCONF
select GPIOLIB
select GPIOLIB_IRQCHIP
select OF_GPIO
help
Say yes here to support pin control on the StarFive JH7100 SoC.
This also provides an interface to the GPIO pins not used by other
peripherals supporting inputs, outputs, configuring pull-up/pull-down
and interrupts on input changes.
config PINCTRL_STMFX
tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
depends on I2C

1
drivers/pinctrl/Makefile
View File

@ -39,6 +39,7 @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
obj-$(CONFIG_PINCTRL_STARFIVE) += pinctrl-starfive.o
obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o
obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o

1354
drivers/pinctrl/pinctrl-starfive.c Normal file
View File

File diff suppressed because it is too large Load Diff