From 40ac7b62d8c132c73a709bd83858b3419f38ec23 Mon Sep 17 00:00:00 2001 From: George Nassar Date: Wed, 14 Oct 2009 18:27:41 -0500 Subject: [PATCH 1/6] USB: rndis_host: debug info clobbered before it is logged The MTU throttle-down if a RNDIS device doesn't support a particular packet size is being incorrectly logged. The attempted packet size is being clobbered before it gets logged. First patch; please inform if I'm doing this incorrectly. Diff'd against latest official source as per the FAQ; forward port to current git version is straightforward. Signed-off-by: George Nassar Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/rndis_host.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 0caa8008c51c..f56dec6119c3 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -362,12 +362,12 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) retval = -EINVAL; goto halt_fail_and_release; } - dev->hard_mtu = tmp; - net->mtu = dev->hard_mtu - net->hard_header_len; dev_warn(&intf->dev, "dev can't take %u byte packets (max %u), " "adjusting MTU to %u\n", - dev->hard_mtu, tmp, net->mtu); + dev->hard_mtu, tmp, tmp - net->hard_header_len); + dev->hard_mtu = tmp; + net->mtu = dev->hard_mtu - net->hard_header_len; } /* REVISIT: peripheral "alignment" request is ignored ... */ From 3c77d5137d3f4ff41721e9b4f4812db56a6065c0 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Fri, 16 Oct 2009 12:04:54 -0700 Subject: [PATCH 2/6] USB: serial: sierra driver send_setup() autopm fix This patch presents a fix for the autosuspend feature implementation in sierra usb serial driver for function sierra_send_setup(). Because it is possible to call sierra_send_setup() before sierra_open() or after sierra_close() we added a get/put interface activity to assure that the usb control can happen even when the device is autosuspended. Signed-off-by: Elina Pasheva Tested-by: Matthew Safar Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 45883988a005..3ec79dfc41fd 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -296,7 +296,6 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; - unsigned int opened:1; }; @@ -306,6 +305,8 @@ static int sierra_send_setup(struct usb_serial_port *port) struct sierra_port_private *portdata; __u16 interface = 0; int val = 0; + int do_send = 0; + int retval; dev_dbg(&port->dev, "%s\n", __func__); @@ -324,10 +325,7 @@ static int sierra_send_setup(struct usb_serial_port *port) */ if (port->interrupt_in_urb) { /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + do_send = 1; } } @@ -339,12 +337,18 @@ static int sierra_send_setup(struct usb_serial_port *port) interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + + do_send = 1; } - return 0; + if (!do_send) + return 0; + + usb_autopm_get_interface(serial->interface); + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + usb_autopm_put_interface(serial->interface); + + return retval; } static void sierra_set_termios(struct tty_struct *tty, From b64dc0a597fd3c66d888df0886635eba210cc19f Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Tue, 27 Oct 2009 13:49:59 -0700 Subject: [PATCH 3/6] USB: serial: sierra driver autopm fixes This patch presents fixes for the autosuspend feature implementation in sierra usb serial driver in functions sierra_open(), sierra_close() and stop_read_write_urbs(). The patch "sierra_close() must resume the device before it notifies it of a closure" submitted by Oliver Neukum on Wed, October 14 has been merged as fix in sierra_close() function. The bug fix in sierra_open() function restores the autopm interface state on error condition. The bug fix in in stop_read_write_urbs() function assures that both receive and interrupt urbs are recycled. Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 3ec79dfc41fd..5019325ba25d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -777,8 +777,11 @@ static void sierra_close(struct usb_serial_port *port) if (serial->dev) { mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) + if (!serial->disconnected) { + serial->interface->needs_remote_wakeup = 0; + usb_autopm_get_interface(serial->interface); sierra_send_setup(port); + } mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; @@ -792,8 +795,6 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } - usb_autopm_get_interface(serial->interface); - serial->interface->needs_remote_wakeup = 0; } } @@ -831,6 +832,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) if (err) { /* get rid of everything as in close */ sierra_close(port); + /* restore balance for autopm */ + usb_autopm_put_interface(serial->interface); return err; } sierra_send_setup(port); @@ -919,7 +922,7 @@ static void sierra_release(struct usb_serial *serial) #ifdef CONFIG_PM static void stop_read_write_urbs(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -927,8 +930,7 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); + sierra_stop_rx_urbs(port); usb_kill_anchored_urbs(&portdata->active); } } From 1e6159f858f5da608612ae10d6554bb7ecac9755 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 21 Oct 2009 20:33:39 +0900 Subject: [PATCH 4/6] USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 749b53742828..e33d36256350 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1003,19 +1003,20 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, if (syssts == SE0) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port)); - return; + } else { + if (syssts == FS_JSTS) + r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); + else if (syssts == LS_JSTS) + r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); + + r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); + r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); + + if (r8a66597->bus_suspended) + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); } - if (syssts == FS_JSTS) - r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); - else if (syssts == LS_JSTS) - r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); - - r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); - r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); - - if (r8a66597->bus_suspended) - usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597)); } /* this function must be called with interrupt disabled */ @@ -1024,6 +1025,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) u16 speed = get_rh_usb_speed(r8a66597, port); struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) | + (1 << USB_PORT_FEAT_LOWSPEED)); if (speed == HSMODE) rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED); else if (speed == LSMODE) From fead2ab6cf9ad3a84a06e68ccc20d1e460fad13e Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 22 Oct 2009 15:00:36 +0800 Subject: [PATCH 5/6] USB: option: TLAYTECH TUE800 support Add ID for Tlaytech TUE800 CDMA modem to the option driver. Signed-off-by: Bryan Wu Acked-By: Matthias Urlichs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 65d96b214f95..cd44c68954df 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -315,6 +315,9 @@ static int option_resume(struct usb_serial *serial); #define QISDA_PRODUCT_H20_4515 0x4515 #define QISDA_PRODUCT_H20_4519 0x4519 +/* TLAYTECH PRODUCTS */ +#define TLAYTECH_VENDOR_ID 0x20B9 +#define TLAYTECH_PRODUCT_TEU800 0x1682 /* TOSHIBA PRODUCTS */ #define TOSHIBA_VENDOR_ID 0x0930 @@ -593,6 +596,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, + { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); From 37c4fd8c7551c7419a5faf87a76ff6949c5adaf3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 29 Oct 2009 19:50:43 +0300 Subject: [PATCH 6/6] USB: fsl_udc_core: Fix kernel oops on module removal fsl_udc_release() calls dma_free_coherent() with an inappropriate device passed to it, and since the device has no dma_ops, the following oops pops up: Kernel BUG at d103ce9c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc] LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] Call Trace: [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90 [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98 [cfbc7e00] [c016c52c] kref_put+0x54/0x6c [cfbc7e10] [c016b360] kobject_put+0x34/0x64 [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc] ... This patch fixes the issue by passing dev->parent, which points to a correct device. Signed-off-by: Anton Vorontsov Cc: Li Yang Cc: David Brownell Cc: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_udc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 42a74b8a0bb8..fa3d142ba64d 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2139,7 +2139,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, static void fsl_udc_release(struct device *dev) { complete(udc_controller->done); - dma_free_coherent(dev, udc_controller->ep_qh_size, + dma_free_coherent(dev->parent, udc_controller->ep_qh_size, udc_controller->ep_qh, udc_controller->ep_qh_dma); kfree(udc_controller); }