Merge branch 'regmap-5.6' into regmap-next

drivers/base/regmap/regmap-i2c.c

@@ -43,7 +43,7 @@ static int regmap_smbus_byte_reg_write(void *context, unsigned int reg,
 	return i2c_smbus_write_byte_data(i2c, reg, val);
 }
 
-static struct regmap_bus regmap_smbus_byte = {
+static const struct regmap_bus regmap_smbus_byte = {
 	.reg_write = regmap_smbus_byte_reg_write,
 	.reg_read = regmap_smbus_byte_reg_read,
 };
@@ -79,7 +79,7 @@ static int regmap_smbus_word_reg_write(void *context, unsigned int reg,
 	return i2c_smbus_write_word_data(i2c, reg, val);
 }
 
-static struct regmap_bus regmap_smbus_word = {
+static const struct regmap_bus regmap_smbus_word = {
 	.reg_write = regmap_smbus_word_reg_write,
 	.reg_read = regmap_smbus_word_reg_read,
 };
@@ -115,7 +115,7 @@ static int regmap_smbus_word_write_swapped(void *context, unsigned int reg,
 	return i2c_smbus_write_word_swapped(i2c, reg, val);
 }
 
-static struct regmap_bus regmap_smbus_word_swapped = {
+static const struct regmap_bus regmap_smbus_word_swapped = {
 	.reg_write = regmap_smbus_word_write_swapped,
 	.reg_read = regmap_smbus_word_read_swapped,
 };
@@ -197,7 +197,7 @@ static int regmap_i2c_read(void *context,
 		return -EIO;
 }
 
-static struct regmap_bus regmap_i2c = {
+static const struct regmap_bus regmap_i2c = {
 	.write = regmap_i2c_write,
 	.gather_write = regmap_i2c_gather_write,
 	.read = regmap_i2c_read,
@@ -239,7 +239,7 @@ static int regmap_i2c_smbus_i2c_read(void *context, const void *reg,
 		return -EIO;
 }
 
-static struct regmap_bus regmap_i2c_smbus_i2c_block = {
+static const struct regmap_bus regmap_i2c_smbus_i2c_block = {
 	.write = regmap_i2c_smbus_i2c_write,
 	.read = regmap_i2c_smbus_i2c_read,
 	.max_raw_read = I2C_SMBUS_BLOCK_MAX,

drivers/base/regmap/regmap.c

@@ -1488,11 +1488,18 @@ static int _regmap_raw_write_impl(struct regmap *map, unsigned int reg,
 
 	WARN_ON(!map->bus);
 
-	/* Check for unwritable registers before we start */
-	for (i = 0; i < val_len / map->format.val_bytes; i++)
-		if (!regmap_writeable(map,
-				     reg + regmap_get_offset(map, i)))
+	/* Check for unwritable or noinc registers in range
+	 * before we start
+	 */
+	if (!regmap_writeable_noinc(map, reg)) {
+		for (i = 0; i < val_len / map->format.val_bytes; i++) {
+			unsigned int element =
+				reg + regmap_get_offset(map, i);
+			if (!regmap_writeable(map, element) ||
+				regmap_writeable_noinc(map, element))
 				return -EINVAL;
+		}
+	}
 
 	if (!map->cache_bypass && map->format.parse_val) {
 		unsigned int ival;

include/linux/regmap.h

@@ -144,6 +144,51 @@ struct reg_sequence {
 	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
 })
 
+/**
+ * regmap_read_poll_timeout_atomic - Poll until a condition is met or a timeout occurs
+ *
+ * @map: Regmap to read from
+ * @addr: Address to poll
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @delay_us: Time to udelay between reads in us (0 tight-loops).
+ *            Should be less than ~10us since udelay is used
+ *            (see Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val.
+ *
+ * This is modelled after the readx_poll_timeout_atomic macros in linux/iopoll.h.
+ *
+ * Note: In general regmap cannot be used in atomic context. If you want to use
+ * this macro then first setup your regmap for atomic use (flat or no cache
+ * and MMIO regmap).
+ */
+#define regmap_read_poll_timeout_atomic(map, addr, val, cond, delay_us, timeout_us) \
+({ \
+	u64 __timeout_us = (timeout_us); \
+	unsigned long __delay_us = (delay_us); \
+	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+	int __ret; \
+	for (;;) { \
+		__ret = regmap_read((map), (addr), &(val)); \
+		if (__ret) \
+			break; \
+		if (cond) \
+			break; \
+		if ((__timeout_us) && \
+		    ktime_compare(ktime_get(), __timeout) > 0) { \
+			__ret = regmap_read((map), (addr), &(val)); \
+			break; \
+		} \
+		if (__delay_us) \
+			udelay(__delay_us); \
+	} \
+	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
 /**
  * regmap_field_read_poll_timeout - Poll until a condition is met or timeout
  *