forked from Minki/linux
More dts changes for omaps to add support for new devices:
- Add DCAN support am335x, am437x and dra7 - Add devices for sb-t3x computers - Add support for NovaTech OrionLXm - Add n900 battery and si4713 support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUc2VBAAoJEBvUPslcq6Vz/IIP/0oz0Wxjqf3t/qvrII6fPVEv jQrdHWBl2WFlxPgADJ6TGqPflWQMKidn0DVU15RamKCAPYLV/uBnc8kgTb9/Ce2j RCLejLi7CoIMawMwGO4c706/0TZoWYlUHt8zJGkkf2JEhhfN9qo2cNTpzEQFjseY UCH1AH1KJvWcmglCj+34lBeSUyR/VPq1rCQwF/Ikc284p9d4Kbf/PFimjoQt4UgJ Xu9p/dr5nA1sVAxZnAy5Dh2J5c4D8ZU/jZ+mmcigRb21C6OBfEqekmp13HGs5PIr 6F0CE0v+Uc+X9JXJAHKs1+5tMf0d1ID4Lxgh/UyZokGdjkOfkKKIyihBh+bEMfOC HYnLV/5wLweqlXidNIZfhNwidADAp8Z1Gvj+bxZ/5amInnosyBafWz16QZn6GVwd AauU7/BA1PPBORim+k9V083SLGStHLRUsZ7w3kI0nfayBv7KFsKyx29kXcaE3Qba f1Ru1Vsl6isldT3hKqSOuEWN+ySaRHkuz5G8TE5P7/6VZm1CBZStOFX1LtnEUgTb vniWvtCPSjXPy6WhL14msqs/in2CIp25svjH9YiDPp7X18nC6pdXqIwxm8p1EmM8 ontR8lJ5ImZJrEouy8mEcs4N1iJJxRjFFrJkiBx2bMoEqD+TlAcnRCh9pk2y6upa A2wqPkus1mHmYBCbqu71 =JYCL -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "More dts changes for omaps to add support for new devices" from Tony Lindgren: - Add DCAN support am335x, am437x and dra7 - Add devices for sb-t3x computers - Add support for NovaTech OrionLXm - Add n900 battery and si4713 support * tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: dts: am335x-evm: Add DCAN1 details ARM: dts: am33xx: Update DCAN nodes ARM: dts: am33xx: Add control module syscon node ARM: dts: am437x-gp: Add dcan support ARM: dts: am4372: Add DCAN nodes ARM: dts: am4372: Add control module syscon node ARM: dts: dra72-evm: Add CAN support ARM: dts: dra7-evm: Add CAN support ARM: dts: DRA7: Add DCAN nodes ARM: dts: dra7: Add syscon regmap for CORE CONTROL area ARM: dts: sbc-t3x30: add audio support ARM: dts: sbc-t3x: add TV out display alias ARM: dts: cm-t3x: add TV out support ARM: dts: cm-t3x: add I2C1 pinmux ARM: dts: AM43xx: add tscadc DT entries for am437x-evm and am43x-epos-evm ARM: dts: cm-t3x30: add keypad support ARM: dts: sb-t35: add EEPROM support ARM: dts: cm-t3x: add EEPROM support ARM: OMAP2+: remove cm-t3x touchscreen pdata quirk ARM: dts: cm-t3x: add ADS7846 touchscreen support ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
ea4409cc44
@ -132,6 +132,9 @@ Boards:
|
||||
- AM335X Bone : Low cost community board
|
||||
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
|
||||
|
||||
- AM335X OrionLXm : Substation Automation Platform
|
||||
compatible = "novatech,am335x-lxm", "ti,am33xx"
|
||||
|
||||
- OMAP5 EVM : Evaluation Module
|
||||
compatible = "ti,omap5-evm", "ti,omap5"
|
||||
|
||||
|
||||
@ -342,7 +342,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
|
||||
am335x-evm.dtb \
|
||||
am335x-evmsk.dtb \
|
||||
am335x-nano.dtb \
|
||||
am335x-pepper.dtb
|
||||
am335x-pepper.dtb \
|
||||
am335x-lxm.dtb
|
||||
dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
|
||||
omap4-panda.dtb \
|
||||
omap4-panda-a4.dtb \
|
||||
|
||||
@ -307,6 +307,13 @@
|
||||
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_default: dcan1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
|
||||
0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
@ -664,3 +671,9 @@
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "disabled"; /* Enable only if Profile 1 is selected */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dcan1_pins_default>;
|
||||
};
|
||||
|
||||
362
arch/arm/boot/dts/am335x-lxm.dts
Normal file
362
arch/arm/boot/dts/am335x-lxm.dts
Normal file
@ -0,0 +1,362 @@
|
||||
/*
|
||||
* Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NovaTech OrionLXm";
|
||||
compatible = "novatech,am335x-lxm", "ti,am33xx";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&vdd1_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
/* Power supply provides a fixed 5V @2A */
|
||||
vbat: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* Power supply provides a fixed 3.3V @3A */
|
||||
vmmcsd_fixed: fixedregulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
|
||||
0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
|
||||
0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
|
||||
0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
|
||||
0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
|
||||
0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c0_pins: pinmux_i2c0_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||||
0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
|
||||
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
|
||||
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
|
||||
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
|
||||
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
|
||||
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
|
||||
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
|
||||
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
|
||||
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
|
||||
|
||||
/* Slave 2 */
|
||||
0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
|
||||
0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
|
||||
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
|
||||
0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
|
||||
0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
|
||||
0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
|
||||
0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
|
||||
0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
|
||||
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 reset value */
|
||||
0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
|
||||
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
|
||||
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
|
||||
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
|
||||
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
|
||||
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
|
||||
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
|
||||
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
|
||||
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
|
||||
|
||||
/* Slave 2 reset value*/
|
||||
0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
|
||||
0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
|
||||
0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
|
||||
0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
|
||||
0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
|
||||
0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
|
||||
0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
|
||||
0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
|
||||
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci_mdio_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO reset value */
|
||||
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
emmc_pins: pinmux_emmc_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
|
||||
0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
|
||||
0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
|
||||
0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
|
||||
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
|
||||
0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
|
||||
0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
|
||||
0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
|
||||
0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
|
||||
0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux_uart0_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||||
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
serial_config1: serial_config1@20 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x20>;
|
||||
};
|
||||
|
||||
serial_config2: serial_config2@21 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x21>;
|
||||
};
|
||||
|
||||
tps: tps@2d {
|
||||
compatible = "ti,tps65910";
|
||||
reg = <0x2d>;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "tps65910.dtsi"
|
||||
|
||||
&tps {
|
||||
vcc1-supply = <&vbat>;
|
||||
vcc2-supply = <&vbat>;
|
||||
vcc3-supply = <&vbat>;
|
||||
vcc4-supply = <&vbat>;
|
||||
vcc5-supply = <&vbat>;
|
||||
vcc6-supply = <&vbat>;
|
||||
vcc7-supply = <&vbat>;
|
||||
vccio-supply = <&vbat>;
|
||||
|
||||
regulators {
|
||||
/* vrtc - unused */
|
||||
|
||||
vio_reg: regulator@1 {
|
||||
regulator-name = "vio_1v5,ddr";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd1_reg: regulator@2 {
|
||||
regulator-name = "vdd1,mpu";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd2_reg: regulator@3 {
|
||||
regulator-name = "vdd2_1v1,core";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vdd3 - unused */
|
||||
|
||||
/* vdig1 - unused */
|
||||
|
||||
vdig2_reg: regulator@6 {
|
||||
regulator-name = "vdig2_1v8,vdds_pll";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* vpll - unused */
|
||||
|
||||
vdac_reg: regulator@8 {
|
||||
regulator-name = "vdac_1v8,vdds";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vaux1_reg: regulator@9 {
|
||||
regulator-name = "vaux1_1v8,usb";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vaux2_reg: regulator@10 {
|
||||
regulator-name = "vaux2_3v3,io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vaux33_reg: regulator@11 {
|
||||
regulator-name = "vaux33_3v3,usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vmmc_reg: regulator@12 {
|
||||
regulator-name = "vmmc_3v3,io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <5>;
|
||||
phy-mode = "rmii";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <4>;
|
||||
phy-mode = "rmii";
|
||||
dual_emac_res_vlan = <3>;
|
||||
};
|
||||
|
||||
&mac {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
dual_emac = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <8>;
|
||||
ti,non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -83,6 +83,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
am33xx_control_module: control_module@4a002000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x44e10000 0x7fc>;
|
||||
};
|
||||
|
||||
am33xx_pinmux: pinmux@44e10800 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x44e10800 0x0238>;
|
||||
@ -339,20 +344,24 @@
|
||||
interrupts = <91>;
|
||||
};
|
||||
|
||||
dcan0: d_can@481cc000 {
|
||||
compatible = "bosch,d_can";
|
||||
dcan0: can@481cc000 {
|
||||
compatible = "ti,am3352-d_can";
|
||||
ti,hwmods = "d_can0";
|
||||
reg = <0x481cc000 0x2000
|
||||
0x44e10644 0x4>;
|
||||
reg = <0x481cc000 0x2000>;
|
||||
clocks = <&dcan0_fck>;
|
||||
clock-names = "fck";
|
||||
syscon-raminit = <&am33xx_control_module 0x644 0>;
|
||||
interrupts = <52>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dcan1: d_can@481d0000 {
|
||||
compatible = "bosch,d_can";
|
||||
dcan1: can@481d0000 {
|
||||
compatible = "ti,am3352-d_can";
|
||||
ti,hwmods = "d_can1";
|
||||
reg = <0x481d0000 0x2000
|
||||
0x44e10644 0x4>;
|
||||
reg = <0x481d0000 0x2000>;
|
||||
clocks = <&dcan1_fck>;
|
||||
clock-names = "fck";
|
||||
syscon-raminit = <&am33xx_control_module 0x644 1>;
|
||||
interrupts = <55>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -57,6 +57,11 @@
|
||||
cache-level = <2>;
|
||||
};
|
||||
|
||||
am43xx_control_module: control_module@4a002000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x44e10000 0x7f4>;
|
||||
};
|
||||
|
||||
am43xx_pinmux: pinmux@44e10800 {
|
||||
compatible = "ti,am437-padconf", "pinctrl-single";
|
||||
reg = <0x44e10800 0x31c>;
|
||||
@ -668,6 +673,26 @@
|
||||
};
|
||||
};
|
||||
|
||||
tscadc: tscadc@44e0d000 {
|
||||
compatible = "ti,am3359-tscadc";
|
||||
reg = <0x44e0d000 0x1000>;
|
||||
ti,hwmods = "adc_tsc";
|
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&adc_tsc_fck>;
|
||||
clock-names = "fck";
|
||||
status = "disabled";
|
||||
|
||||
tsc {
|
||||
compatible = "ti,am3359-tsc";
|
||||
};
|
||||
|
||||
adc {
|
||||
#io-channel-cells = <1>;
|
||||
compatible = "ti,am3359-adc";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
sham: sham@53100000 {
|
||||
compatible = "ti,omap5-sham";
|
||||
ti,hwmods = "sham";
|
||||
@ -897,6 +922,28 @@
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x40300000 0x40000>; /* 256k */
|
||||
};
|
||||
|
||||
dcan0: can@481cc000 {
|
||||
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
||||
ti,hwmods = "d_can0";
|
||||
clocks = <&dcan0_fck>;
|
||||
clock-names = "fck";
|
||||
reg = <0x481cc000 0x2000>;
|
||||
syscon-raminit = <&am43xx_control_module 0x644 0>;
|
||||
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dcan1: can@481d0000 {
|
||||
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
||||
ti,hwmods = "d_can1";
|
||||
clocks = <&dcan1_fck>;
|
||||
clock-names = "fck";
|
||||
reg = <0x481d0000 0x2000>;
|
||||
syscon-raminit = <&am43xx_control_module 0x644 1>;
|
||||
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -254,6 +254,20 @@
|
||||
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
dcan0_default: dcan0_default_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
|
||||
0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_default: dcan1_default_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
|
||||
0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
@ -343,6 +357,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecap0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
@ -511,3 +533,15 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dcan0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dcan0_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dcan1_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -519,6 +519,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecap0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
|
||||
@ -251,6 +251,21 @@
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_default: dcan1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
|
||||
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
|
||||
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_sleep: dcan1_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
|
||||
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
|
||||
0x418 (MUX_MODE15) /* wakeup0.off */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
@ -639,3 +654,10 @@
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&dcan1_pins_default>;
|
||||
pinctrl-1 = <&dcan1_pins_sleep>;
|
||||
};
|
||||
|
||||
@ -40,6 +40,8 @@
|
||||
serial9 = &uart10;
|
||||
ethernet0 = &cpsw_emac0;
|
||||
ethernet1 = &cpsw_emac1;
|
||||
d_can0 = &dcan1;
|
||||
d_can1 = &dcan2;
|
||||
};
|
||||
|
||||
timer {
|
||||
@ -207,6 +209,11 @@
|
||||
ti,hwmods = "counter_32k";
|
||||
};
|
||||
|
||||
dra7_ctrl_core: ctrl_core@4a002000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x4a002000 0x6d0>;
|
||||
};
|
||||
|
||||
dra7_ctrl_general: tisyscon@4a002e00 {
|
||||
compatible = "syscon";
|
||||
reg = <0x4a002e00 0x7c>;
|
||||
@ -1157,6 +1164,15 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@48838000 {
|
||||
compatible = "ti,am3352-rtc";
|
||||
reg = <0x48838000 0x100>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "rtcss";
|
||||
clocks = <&sys_32k_ck>;
|
||||
};
|
||||
|
||||
omap_control_usb2phy1: control-phy@4a002300 {
|
||||
compatible = "ti,control-phy-usb2";
|
||||
reg = <0x4a002300 0x4>;
|
||||
@ -1386,6 +1402,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
dcan1: can@481cc000 {
|
||||
compatible = "ti,dra7-d_can";
|
||||
ti,hwmods = "dcan1";
|
||||
reg = <0x4ae3c000 0x2000>;
|
||||
syscon-raminit = <&dra7_ctrl_core 0x558 0>;
|
||||
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&dcan1_sys_clk_mux>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dcan2: can@481d0000 {
|
||||
compatible = "ti,dra7-d_can";
|
||||
ti,hwmods = "dcan2";
|
||||
reg = <0x48480000 0x2000>;
|
||||
syscon-raminit = <&dra7_ctrl_core 0x558 1>;
|
||||
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&sys_clkin1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -105,6 +105,22 @@
|
||||
0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_default: dcan1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
|
||||
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
|
||||
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_sleep: dcan1_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
|
||||
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
|
||||
0x418 (MUX_MODE15) /* wakeup0.off */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
@ -438,3 +454,10 @@
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
active_slave = <1>;
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&dcan1_pins_default>;
|
||||
pinctrl-1 = <&dcan1_pins_sleep>;
|
||||
};
|
||||
|
||||
@ -49,6 +49,24 @@
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <&hsusb2_power>;
|
||||
};
|
||||
|
||||
ads7846reg: ads7846-reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ads7846-reg";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
tv0: connector@1 {
|
||||
compatible = "svideo-connector";
|
||||
label = "tv";
|
||||
|
||||
port {
|
||||
tv_connector_in: endpoint {
|
||||
remote-endpoint = <&venc_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -107,12 +125,43 @@
|
||||
|
||||
dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
>;
|
||||
};
|
||||
|
||||
ads7846_pins: pinmux_ads7846_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi1_pins: pinmux_mcspi1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */
|
||||
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */
|
||||
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */
|
||||
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
||||
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mcbsp2_pins: pinmux_mcbsp2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
|
||||
OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
|
||||
OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
|
||||
OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -133,12 +182,22 @@
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
at24@50 {
|
||||
compatible = "at24,24c02";
|
||||
pagesize = <16>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port1-mode = "ehci-phy";
|
||||
port2-mode = "ehci-phy";
|
||||
@ -147,3 +206,56 @@
|
||||
&usbhsehci {
|
||||
phys = <&hsusb1_phy &hsusb2_phy>;
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi1_pins>;
|
||||
|
||||
/* touch controller */
|
||||
ads7846@0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ads7846_pins>;
|
||||
|
||||
compatible = "ti,ads7846";
|
||||
vcc-supply = <&ads7846reg>;
|
||||
|
||||
reg = <0>; /* CS0 */
|
||||
spi-max-frequency = <1500000>;
|
||||
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <25 0>; /* gpio_57 */
|
||||
pendown-gpio = <&gpio2 25 0>;
|
||||
|
||||
ti,x-min = /bits/ 16 <0x0>;
|
||||
ti,x-max = /bits/ 16 <0x0fff>;
|
||||
ti,y-min = /bits/ 16 <0x0>;
|
||||
ti,y-max = /bits/ 16 <0x0fff>;
|
||||
|
||||
ti,x-plate-ohms = /bits/ 16 <180>;
|
||||
ti,pressure-max = /bits/ 16 <255>;
|
||||
|
||||
ti,debounce-max = /bits/ 16 <30>;
|
||||
ti,debounce-tol = /bits/ 16 <10>;
|
||||
ti,debounce-rep = /bits/ 16 <1>;
|
||||
|
||||
linux,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
&venc {
|
||||
status = "ok";
|
||||
|
||||
port {
|
||||
venc_out: endpoint {
|
||||
remote-endpoint = <&tv_connector_in>;
|
||||
ti,channels = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mcbsp2 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcbsp2_pins>;
|
||||
};
|
||||
|
||||
@ -10,6 +10,14 @@
|
||||
cpu0-supply = <&vcc>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "ti,omap-twl4030";
|
||||
ti,model = "cm-t35";
|
||||
|
||||
ti,mcbsp = <&mcbsp2>;
|
||||
ti,codec = <&twl_audio>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -59,11 +67,22 @@
|
||||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
twl_audio: audio {
|
||||
compatible = "ti,twl4030-audio";
|
||||
codec {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
#include "twl4030.dtsi"
|
||||
#include "twl4030_omap3.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
&venc {
|
||||
vdda-supply = <&vdac>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <&vmmc1>;
|
||||
@ -75,6 +94,22 @@
|
||||
ti,pullups = <0x000001>;
|
||||
};
|
||||
|
||||
&twl_keypad {
|
||||
linux,keymap = <
|
||||
MATRIX_KEY(0x00, 0x01, KEY_A)
|
||||
MATRIX_KEY(0x00, 0x02, KEY_B)
|
||||
MATRIX_KEY(0x00, 0x03, KEY_LEFT)
|
||||
|
||||
MATRIX_KEY(0x01, 0x01, KEY_UP)
|
||||
MATRIX_KEY(0x01, 0x02, KEY_ENTER)
|
||||
MATRIX_KEY(0x01, 0x03, KEY_DOWN)
|
||||
|
||||
MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
|
||||
MATRIX_KEY(0x02, 0x02, KEY_C)
|
||||
MATRIX_KEY(0x02, 0x03, KEY_D)
|
||||
>;
|
||||
};
|
||||
|
||||
&hsusb1_phy {
|
||||
reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
@ -115,6 +115,12 @@
|
||||
eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
|
||||
speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
battery: n900-battery {
|
||||
compatible = "nokia,n900-battery";
|
||||
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
|
||||
io-channel-names = "temp", "bsi", "vbat";
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -567,6 +573,16 @@
|
||||
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
|
||||
};
|
||||
|
||||
si4713: si4713@63 {
|
||||
compatible = "silabs,si4713";
|
||||
reg = <0x63>;
|
||||
|
||||
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
|
||||
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
|
||||
vio-supply = <&vio>;
|
||||
vdd-supply = <&vaux1>;
|
||||
};
|
||||
|
||||
bq24150a: bq24150a@6b {
|
||||
compatible = "ti,bq24150a";
|
||||
reg = <0x6b>;
|
||||
|
||||
@ -43,6 +43,16 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
audio_amp: audio_amp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "audio_amp";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sb_t35_audio_amp>;
|
||||
gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
|
||||
enable-active-low;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
@ -58,6 +68,32 @@
|
||||
OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
||||
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
|
||||
clock-frequency = <400000>;
|
||||
|
||||
at24@50 {
|
||||
compatible = "at24,24c02";
|
||||
pagesize = <16>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
|
||||
@ -11,6 +11,7 @@
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
display1 = &tv0;
|
||||
};
|
||||
|
||||
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
|
||||
|
||||
@ -11,6 +11,7 @@
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
display1 = &tv0;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -11,6 +11,7 @@
|
||||
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
display1 = &tv0;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -177,6 +177,7 @@
|
||||
|
||||
&hdmi {
|
||||
status = "ok";
|
||||
vdda-supply = <&vdac>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_hdmi_pins>;
|
||||
|
||||
@ -131,13 +131,11 @@ static void __init omap3_sbc_t3730_legacy_init(void)
|
||||
{
|
||||
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
|
||||
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
|
||||
omap_ads7846_init(1, 57, 0, NULL);
|
||||
}
|
||||
|
||||
static void __init omap3_sbc_t3530_legacy_init(void)
|
||||
{
|
||||
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
|
||||
omap_ads7846_init(1, 57, 0, NULL);
|
||||
}
|
||||
|
||||
struct ti_st_plat_data wilink_pdata = {
|
||||
@ -249,7 +247,6 @@ static void __init omap3_sbc_t3517_legacy_init(void)
|
||||
hsmmc2_internal_input_clk();
|
||||
omap3_sbc_t3517_wifi_init();
|
||||
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
|
||||
omap_ads7846_init(1, 57, 0, NULL);
|
||||
}
|
||||
|
||||
static void __init am3517_evm_legacy_init(void)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user