Staging: brcm80211: sys: remove unneeded use of uintptr

uintptr shouldn't be used when you are just casting to a pointer anyway,
so remove it from these usages.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Greg Kroah-Hartman 2010-10-12 13:20:19 -07:00
parent 159a3b78f9
commit e88cf8eb62
2 changed files with 12 additions and 15 deletions

View File

@ -89,11 +89,11 @@
#define DMAREG(wlc_hw, direction, fifonum) (D11REV_LT(wlc_hw->corerev, 11) ? \
((direction == DMA_TX) ? \
(void *)(uintptr)&(wlc_hw->regs->fifo.f32regs.dmaregs[fifonum].xmt) : \
(void *)(uintptr)&(wlc_hw->regs->fifo.f32regs.dmaregs[fifonum].rcv)) : \
(void *)&(wlc_hw->regs->fifo.f32regs.dmaregs[fifonum].xmt) : \
(void *)&(wlc_hw->regs->fifo.f32regs.dmaregs[fifonum].rcv)) : \
((direction == DMA_TX) ? \
(void *)(uintptr)&(wlc_hw->regs->fifo.f64regs[fifonum].dmaxmt) : \
(void *)(uintptr)&(wlc_hw->regs->fifo.f64regs[fifonum].dmarcv)))
(void *)&(wlc_hw->regs->fifo.f64regs[fifonum].dmaxmt) : \
(void *)&(wlc_hw->regs->fifo.f64regs[fifonum].dmarcv)))
/*
* The following table lists the buffer memory allocated to xmt fifos in HW.
@ -930,7 +930,7 @@ int wlc_bmac_attach(wlc_info_t *wlc, u16 vendor, u16 device, uint unit,
/* Get a phy for this band */
wlc_hw->band->pi = wlc_phy_attach(wlc_hw->phy_sh,
(void *)(uintptr) regs, wlc_hw->band->bandtype, vars);
(void *)regs, wlc_hw->band->bandtype, vars);
if (wlc_hw->band->pi == NULL) {
WL_ERROR(("wl%d: wlc_bmac_attach: wlc_phy_attach failed\n", unit));
err = 17;
@ -1712,8 +1712,7 @@ wlc_bmac_set_rcmta(wlc_hw_info_t *wlc_hw, int idx,
const struct ether_addr *addr)
{
d11regs_t *regs = wlc_hw->regs;
volatile u16 *objdata16 =
(volatile u16 *)(uintptr) & regs->objdata;
volatile u16 *objdata16 = (volatile u16 *)&regs->objdata;
u32 mac_hm;
u16 mac_l;
osl_t *osh;
@ -2846,10 +2845,10 @@ static void wlc_write_inits(wlc_hw_info_t *wlc_hw, const d11init_t *inits)
ASSERT((inits[i].size == 2) || (inits[i].size == 4));
if (inits[i].size == 2)
W_REG(osh, (u16 *) (uintptr) (base + inits[i].addr),
W_REG(osh, (u16 *)(base + inits[i].addr),
inits[i].value);
else if (inits[i].size == 4)
W_REG(osh, (u32 *) (uintptr) (base + inits[i].addr),
W_REG(osh, (u32 *)(base + inits[i].addr),
inits[i].value);
}
}
@ -3716,7 +3715,7 @@ bool wlc_bmac_validate_chip_access(wlc_hw_info_t *wlc_hw)
/* if 32 bit writes are split into 16 bit writes, are they in the correct order
* for our interface, low to high
*/
reg16 = (volatile u16 *)(uintptr) & regs->tsf_cfpstart;
reg16 = (volatile u16 *)&regs->tsf_cfpstart;
/* write the CFPStart register low half explicitly, starting a buffered write */
W_REG(osh, reg16, 0xAAAA);
@ -3934,8 +3933,7 @@ static u16
wlc_bmac_read_objmem(wlc_hw_info_t *wlc_hw, uint offset, u32 sel)
{
d11regs_t *regs = wlc_hw->regs;
volatile u16 *objdata_lo =
(volatile u16 *)(uintptr) & regs->objdata;
volatile u16 *objdata_lo = (volatile u16 *)&regs->objdata;
volatile u16 *objdata_hi = objdata_lo + 1;
u16 v;
@ -3956,8 +3954,7 @@ static void
wlc_bmac_write_objmem(wlc_hw_info_t *wlc_hw, uint offset, u16 v, u32 sel)
{
d11regs_t *regs = wlc_hw->regs;
volatile u16 *objdata_lo =
(volatile u16 *)(uintptr) & regs->objdata;
volatile u16 *objdata_lo = (volatile u16 *)&regs->objdata;
volatile u16 *objdata_hi = objdata_lo + 1;
ASSERT((offset & 1) == 0);

View File

@ -340,7 +340,7 @@ void wlc_get_rcmta(wlc_info_t *wlc, int idx, struct ether_addr *addr)
addr->octet[3] = (u8) (v32 >> 24);
W_REG(osh, &regs->objaddr, (OBJADDR_RCMTA_SEL | ((idx * 2) + 1)));
(void)R_REG(osh, &regs->objaddr);
v32 = R_REG(osh, (volatile u16 *)(uintptr) & regs->objdata);
v32 = R_REG(osh, (volatile u16 *)&regs->objdata);
addr->octet[4] = (u8) v32;
addr->octet[5] = (u8) (v32 >> 8);
}