Merge branch 'for-rmk-rc' of git://git.pengutronix.de/git/imx/linux-2.6

arch/arm/mach-mx2/clock_imx27.c

@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
 	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)

arch/arm/mach-mx2/pcm038.c

@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
 	PC6_PF_I2C2_SCL,
 	/* SPI1 */
 	PD25_PF_CSPI1_RDY,
-	PD27_PF_CSPI1_SS1,
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 	}
 };
 
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
 
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD

arch/arm/mach-mx2/pcm970-baseboard.c

@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
-	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
 	/* display */
 	PA5_PF_LSCLK,
 	PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
 			"PCM970");
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }

arch/arm/mach-mx25/devices.c

@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>

arch/arm/mach-mx25/mx25pdk.c

@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
 static void __init mx25pdk_init(void)
 {
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 
-
 static void __init mx25pdk_timer_init(void)
 {
 	mx25_clocks_init(26000000);

arch/arm/mach-mx3/clock-imx35.c

@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)

arch/arm/mach-mx3/clock.c

@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)

arch/arm/mach-mx3/devices.c

@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
  * SPI master controller
  * 3 channels
  */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
 	{
 	       .start = CSPI1_BASE_ADDR,
 	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
 	},
 };
 
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
 	{
 		.start = CSPI2_BASE_ADDR,
 		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
 	},
 };
 
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
 	{
 		.start = CSPI3_BASE_ADDR,
 		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
 	},
 };
 
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
 	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
+	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-	.resource = imx_spi_0_resources,
+	.resource = mxc_spi_0_resources,
 };
 
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
 	.name = "spi_imx",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
+	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-	.resource = imx_spi_1_resources,
+	.resource = mxc_spi_1_resources,
 };
 
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
 	.name = "spi_imx",
 	.id = 2,
-	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
+	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-	.resource = imx_spi_2_resources,
+	.resource = mxc_spi_2_resources,
 };
 
 #ifdef CONFIG_ARCH_MX35

arch/arm/mach-mx3/devices.h

@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
+extern struct platform_device mxc_spi_device0;
-extern struct platform_device imx_spi_device1;
+extern struct platform_device mxc_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device2;
 

arch/arm/mach-mx3/mm.c

@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 
 void __init mx31_init_irq(void)
 {