diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index c65921e66dc1..81c87295912c 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -136,7 +136,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 060a309ff8e7..dbe7ecc19ccb 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -142,7 +142,7 @@ examples:
         down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 877183cf4278..1ef849dc74d7 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..ee42328a109d 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
index 06eca6667f67..8367a1fd4057 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -105,7 +105,7 @@ examples:
           reg = <0x65>;
           interrupt-parent = <&gpio1>;
           interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timer = <0>;
+          ti,watchdog-timeout-ms = <0>;
           ti,sc-ocp-limit-microamp = <2000000>;
           ti,sc-ovp-limit-microvolt = <17800000>;
           monitored-battery = <&bat>;
diff --git a/Makefile b/Makefile
index 9e12c14ea0fb..fa5070e53979 100644
--- a/Makefile
+++ b/Makefile
@@ -1374,17 +1374,17 @@ endif
 
 ifneq ($(dtstree),)
 
-%.dtb: dt_binding_check include/config/kernel.release scripts_dtc
-	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ $(dtstree)/$*.dt.yaml
+%.dtb: include/config/kernel.release scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
-%.dtbo: dt_binding_check include/config/kernel.release scripts_dtc
-	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ $(dtstree)/$*.dt.yaml
+%.dtbo: include/config/kernel.release scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
 PHONY += dtbs dtbs_install dtbs_check
 dtbs: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)
 
-ifneq ($(filter dtbs_check %.dtb %.dtbo, $(MAKECMDGOALS)),)
+ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
 export CHECK_DTBS=y
 dtbs: dt_binding_check
 endif
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
index b19ce1a83f91..b2c829e95bd1 100644
--- a/drivers/firmware/efi/efi-init.c
+++ b/drivers/firmware/efi/efi-init.c
@@ -235,6 +235,11 @@ void __init efi_init(void)
 	}
 
 	reserve_regions();
+	/*
+	 * For memblock manipulation, the cap should come after the memblock_add().
+	 * And now, memblock is fully populated, it is time to do capping.
+	 */
+	early_init_dt_check_for_usable_mem_range();
 	efi_esrt_init();
 	efi_mokvar_table_init();
 
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index cf7608f0537b..ca2cfb3012a4 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -967,18 +967,22 @@ static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
 		 elfcorehdr_addr, elfcorehdr_size);
 }
 
-static phys_addr_t cap_mem_addr;
-static phys_addr_t cap_mem_size;
+static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
 
 /**
  * early_init_dt_check_for_usable_mem_range - Decode usable memory range
  * location from flat tree
- * @node: reference to node containing usable memory range location ('chosen')
  */
-static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
+void __init early_init_dt_check_for_usable_mem_range(void)
 {
 	const __be32 *prop;
 	int len;
+	phys_addr_t cap_mem_addr;
+	phys_addr_t cap_mem_size;
+	unsigned long node = chosen_node_offset;
+
+	if ((long)node < 0)
+		return;
 
 	pr_debug("Looking for usable-memory-range property... ");
 
@@ -991,6 +995,8 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
 
 	pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr,
 		 &cap_mem_size);
+
+	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
 }
 
 #ifdef CONFIG_SERIAL_EARLYCON
@@ -1143,9 +1149,10 @@ int __init early_init_dt_scan_chosen(char *cmdline)
 	if (node < 0)
 		return -ENOENT;
 
+	chosen_node_offset = node;
+
 	early_init_dt_check_for_initrd(node);
 	early_init_dt_check_for_elfcorehdr(node);
-	early_init_dt_check_for_usable_mem_range(node);
 
 	/* Retrieve command line */
 	p = of_get_flat_dt_prop(node, "bootargs", &l);
@@ -1280,7 +1287,7 @@ void __init early_init_dt_scan_nodes(void)
 	early_init_dt_scan_memory();
 
 	/* Handle linux,usable-memory-range property */
-	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
+	early_init_dt_check_for_usable_mem_range();
 }
 
 bool __init early_init_dt_scan(void *params)
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index b10f015b2e37..2b07677a386b 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -76,6 +76,26 @@ struct device_node *of_irq_find_parent(struct device_node *child)
 }
 EXPORT_SYMBOL_GPL(of_irq_find_parent);
 
+/*
+ * These interrupt controllers abuse interrupt-map for unspeakable
+ * reasons and rely on the core code to *ignore* it (the drivers do
+ * their own parsing of the property).
+ *
+ * If you think of adding to the list for something *new*, think
+ * again. There is a high chance that you will be sent back to the
+ * drawing board.
+ */
+static const char * const of_irq_imap_abusers[] = {
+	"CBEA,platform-spider-pic",
+	"sti,platform-spider-pic",
+	"realtek,rtl-intc",
+	"fsl,ls1021a-extirq",
+	"fsl,ls1043a-extirq",
+	"fsl,ls1088a-extirq",
+	"renesas,rza1-irqc",
+	NULL,
+};
+
 /**
  * of_irq_parse_raw - Low level interrupt tree parsing
  * @addr:	address specifier (start of "reg" property of the device) in be32 format
@@ -159,12 +179,15 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq)
 		/*
 		 * Now check if cursor is an interrupt-controller and
 		 * if it is then we are done, unless there is an
-		 * interrupt-map which takes precedence.
+		 * interrupt-map which takes precedence except on one
+		 * of these broken platforms that want to parse
+		 * interrupt-map themselves for $reason.
 		 */
 		bool intc = of_property_read_bool(ipar, "interrupt-controller");
 
 		imap = of_get_property(ipar, "interrupt-map", &imaplen);
-		if (imap == NULL && intc) {
+		if (intc &&
+		    (!imap || of_device_compatible_match(ipar, of_irq_imap_abusers))) {
 			pr_debug(" -> got it !\n");
 			return 0;
 		}
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 914739f3c192..d69ad5bb1eb1 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -60,6 +60,7 @@ extern uint32_t of_get_flat_dt_phandle(unsigned long node);
 
 extern int early_init_dt_scan_chosen(char *cmdline);
 extern int early_init_dt_scan_memory(void);
+extern void early_init_dt_check_for_usable_mem_range(void);
 extern int early_init_dt_scan_chosen_stdout(void);
 extern void early_init_fdt_scan_reserved_mem(void);
 extern void early_init_fdt_reserve_self(void);
@@ -83,6 +84,7 @@ extern void unflatten_and_copy_device_tree(void);
 extern void early_init_devtree(void *);
 extern void early_get_first_memblock_info(void *, phys_addr_t *);
 #else /* CONFIG_OF_EARLY_FLATTREE */
+static inline void early_init_dt_check_for_usable_mem_range(void) {}
 static inline int early_init_dt_scan_chosen_stdout(void) { return -ENODEV; }
 static inline void early_init_fdt_scan_reserved_mem(void) {}
 static inline void early_init_fdt_reserve_self(void) {}