forked from Minki/linux
pwm: Add BCM2835 PWM driver
Add PWM driver for Broadcom BCM2835 processor (Raspberry Pi) Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
Bart Tanghe
Thierry Reding
parent
cac7f24298
commit
e5a06dc5ac
30
Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
Normal file
30
Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
Normal file
@ -0,0 +1,30 @@
|
||||
BCM2835 PWM controller (Raspberry Pi controller)
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "brcm,bcm2835-pwm"
|
||||
- reg: physical base address and length of the controller's registers
|
||||
- clock: This clock defines the base clock frequency of the PWM hardware
|
||||
system, the period and the duty_cycle of the PWM signal is a multiple of
|
||||
the base period.
|
||||
- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
|
||||
the cells format.
|
||||
|
||||
Examples:
|
||||
|
||||
pwm@2020c000 {
|
||||
compatible = "brcm,bcm2835-pwm";
|
||||
reg = <0x2020c000 0x28>;
|
||||
clocks = <&clk_pwm>;
|
||||
#pwm-cells = <2>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
....
|
||||
clk_pwm: pwm {
|
||||
compatible = "fixed-clock";
|
||||
reg = <3>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <9200000>;
|
||||
};
|
||||
....
|
||||
};
|
||||
@ -71,6 +71,15 @@ config PWM_BCM_KONA
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-bcm-kona.
|
||||
|
||||
config PWM_BCM2835
|
||||
tristate "BCM2835 PWM support"
|
||||
depends on ARCH_BCM2835
|
||||
help
|
||||
PWM framework driver for BCM2835 controller (Raspberry Pi)
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-bcm2835.
|
||||
|
||||
config PWM_BFIN
|
||||
tristate "Blackfin PWM support"
|
||||
depends on BFIN_GPTIMERS
|
||||
|
||||
@ -4,6 +4,7 @@ obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
|
||||
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
|
||||
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
|
||||
obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
|
||||
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
|
||||
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
|
||||
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
|
||||
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
|
||||
|
||||
205
drivers/pwm/pwm-bcm2835.c
Normal file
205
drivers/pwm/pwm-bcm2835.c
Normal file
@ -0,0 +1,205 @@
|
||||
/*
|
||||
* Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
|
||||
#define PWM_CONTROL 0x000
|
||||
#define PWM_CONTROL_SHIFT(x) ((x) * 8)
|
||||
#define PWM_CONTROL_MASK 0xff
|
||||
#define PWM_MODE 0x80 /* set timer in PWM mode */
|
||||
#define PWM_ENABLE (1 << 0)
|
||||
#define PWM_POLARITY (1 << 4)
|
||||
|
||||
#define PERIOD(x) (((x) * 0x10) + 0x10)
|
||||
#define DUTY(x) (((x) * 0x10) + 0x14)
|
||||
|
||||
#define MIN_PERIOD 108 /* 9.2 MHz max. PWM clock */
|
||||
|
||||
struct bcm2835_pwm {
|
||||
struct pwm_chip chip;
|
||||
struct device *dev;
|
||||
unsigned long scaler;
|
||||
void __iomem *base;
|
||||
struct clk *clk;
|
||||
};
|
||||
|
||||
static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
|
||||
{
|
||||
return container_of(chip, struct bcm2835_pwm, chip);
|
||||
}
|
||||
|
||||
static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
||||
u32 value;
|
||||
|
||||
value = readl(pc->base + PWM_CONTROL);
|
||||
value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
||||
value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
||||
writel(value, pc->base + PWM_CONTROL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
||||
u32 value;
|
||||
|
||||
value = readl(pc->base + PWM_CONTROL);
|
||||
value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
||||
writel(value, pc->base + PWM_CONTROL);
|
||||
}
|
||||
|
||||
static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
int duty_ns, int period_ns)
|
||||
{
|
||||
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
||||
|
||||
if (period_ns <= MIN_PERIOD) {
|
||||
dev_err(pc->dev, "period %d not supported, minimum %d\n",
|
||||
period_ns, MIN_PERIOD);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
writel(duty_ns / pc->scaler, pc->base + DUTY(pwm->hwpwm));
|
||||
writel(period_ns / pc->scaler, pc->base + PERIOD(pwm->hwpwm));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bcm2835_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
||||
u32 value;
|
||||
|
||||
value = readl(pc->base + PWM_CONTROL);
|
||||
value |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
|
||||
writel(value, pc->base + PWM_CONTROL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void bcm2835_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
||||
u32 value;
|
||||
|
||||
value = readl(pc->base + PWM_CONTROL);
|
||||
value &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
||||
writel(value, pc->base + PWM_CONTROL);
|
||||
}
|
||||
|
||||
static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
enum pwm_polarity polarity)
|
||||
{
|
||||
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
|
||||
u32 value;
|
||||
|
||||
value = readl(pc->base + PWM_CONTROL);
|
||||
|
||||
if (polarity == PWM_POLARITY_NORMAL)
|
||||
value &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
|
||||
else
|
||||
value |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
|
||||
|
||||
writel(value, pc->base + PWM_CONTROL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops bcm2835_pwm_ops = {
|
||||
.request = bcm2835_pwm_request,
|
||||
.free = bcm2835_pwm_free,
|
||||
.config = bcm2835_pwm_config,
|
||||
.enable = bcm2835_pwm_enable,
|
||||
.disable = bcm2835_pwm_disable,
|
||||
.set_polarity = bcm2835_set_polarity,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int bcm2835_pwm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct bcm2835_pwm *pc;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
|
||||
if (!pc)
|
||||
return -ENOMEM;
|
||||
|
||||
pc->dev = &pdev->dev;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
pc->base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(pc->base))
|
||||
return PTR_ERR(pc->base);
|
||||
|
||||
pc->clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(pc->clk)) {
|
||||
dev_err(&pdev->dev, "clock not found: %ld\n", PTR_ERR(pc->clk));
|
||||
return PTR_ERR(pc->clk);
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(pc->clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
pc->scaler = NSEC_PER_SEC / clk_get_rate(pc->clk);
|
||||
|
||||
pc->chip.dev = &pdev->dev;
|
||||
pc->chip.ops = &bcm2835_pwm_ops;
|
||||
pc->chip.npwm = 2;
|
||||
|
||||
platform_set_drvdata(pdev, pc);
|
||||
|
||||
ret = pwmchip_add(&pc->chip);
|
||||
if (ret < 0)
|
||||
goto add_fail;
|
||||
|
||||
return 0;
|
||||
|
||||
add_fail:
|
||||
clk_disable_unprepare(pc->clk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int bcm2835_pwm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
|
||||
|
||||
clk_disable_unprepare(pc->clk);
|
||||
|
||||
return pwmchip_remove(&pc->chip);
|
||||
}
|
||||
|
||||
static const struct of_device_id bcm2835_pwm_of_match[] = {
|
||||
{ .compatible = "brcm,bcm2835-pwm", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match);
|
||||
|
||||
static struct platform_driver bcm2835_pwm_driver = {
|
||||
.driver = {
|
||||
.name = "bcm2835-pwm",
|
||||
.of_match_table = bcm2835_pwm_of_match,
|
||||
},
|
||||
.probe = bcm2835_pwm_probe,
|
||||
.remove = bcm2835_pwm_remove,
|
||||
};
|
||||
module_platform_driver(bcm2835_pwm_driver);
|
||||
|
||||
MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be");
|
||||
MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user