diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt deleted file mode 100644 index 173595305e26..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt +++ /dev/null @@ -1,67 +0,0 @@ -MIPS Global Interrupt Controller (GIC) - -The MIPS GIC routes external interrupts to individual VPEs and IRQ pins. -It also supports local (per-processor) interrupts and software-generated -interrupts which can be used as IPIs. The GIC also includes a free-running -global timer, per-CPU count/compare timers, and a watchdog. - -Required properties: -- compatible : Should be "mti,gic". -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt specifier. Should be 3. - - The first cell is the type of interrupt, local or shared. - See . - - The second cell is the GIC interrupt number. - - The third cell encodes the interrupt flags. - See for a list of valid - flags. - -Optional properties: -- reg : Base address and length of the GIC registers. If not present, - the base address reported by the hardware GCR_GIC_BASE will be used. -- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors - to which the GIC may not route interrupts. Valid values are 2 - 7. - This property is ignored if the CPU is started in EIC mode. -- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are - reserved for IPIs. - It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size - of the reserved range. - If not specified, the driver will allocate the last 2 * number of VPEs in the - system. - -Required properties for timer sub-node: -- compatible : Should be "mti,gic-timer". -- interrupts : Interrupt for the GIC local timer. - -Optional properties for timer sub-node: -- clocks : GIC timer operating clock. -- clock-frequency : Clock frequency at which the GIC timers operate. - -Note that one of clocks or clock-frequency must be specified. - -Example: - - gic: interrupt-controller@1bdc0000 { - compatible = "mti,gic"; - reg = <0x1bdc0000 0x20000>; - - interrupt-controller; - #interrupt-cells = <3>; - - mti,reserved-cpu-vectors = <7>; - mti,reserved-ipi-vectors = <40 8>; - - timer { - compatible = "mti,gic-timer"; - interrupts = ; - clock-frequency = <50000000>; - }; - }; - - uart@18101400 { - ... - interrupt-parent = <&gic>; - interrupts = ; - ... - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml new file mode 100644 index 000000000000..9f0eb3addac4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS Global Interrupt Controller + +maintainers: + - Paul Burton + - Thomas Bogendoerfer + +description: | + The MIPS GIC routes external interrupts to individual VPEs and IRQ pins. + It also supports local (per-processor) interrupts and software-generated + interrupts which can be used as IPIs. The GIC also includes a free-running + global timer, per-CPU count/compare timers, and a watchdog. + +properties: + compatible: + const: mti,gic + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the type of interrupt: local or shared defined in the + file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the + GIC interrupt number. The 3d cell encodes the interrupt flags setting up + the IRQ trigger modes, which are defined in the file + 'dt-bindings/interrupt-controller/irq.h'. + + reg: + description: | + Base address and length of the GIC registers space. If not present, + the base address reported by the hardware GCR_GIC_BASE will be used. + maxItems: 1 + + interrupt-controller: true + + mti,reserved-cpu-vectors: + description: | + Specifies the list of CPU interrupt vectors to which the GIC may not + route interrupts. This property is ignored if the CPU is started in EIC + mode. + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - minItems: 1 + maxItems: 6 + uniqueItems: true + items: + minimum: 2 + maximum: 7 + + mti,reserved-ipi-vectors: + description: | + Specifies the range of GIC interrupts that are reserved for IPIs. + It accepts two values: the 1st is the starting interrupt and the 2nd is + the size of the reserved range. If not specified, the driver will + allocate the last (2 * number of VPEs in the system). + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - items: + - minimum: 0 + maximum: 254 + - minimum: 2 + maximum: 254 + + timer: + type: object + description: | + MIPS GIC includes a free-running global timer, per-CPU count/compare + timers, and a watchdog. Currently only the GIC Timer is supported. + properties: + compatible: + const: mti,gic-timer + + interrupts: + description: | + Interrupt for the GIC local timer, so normally it's suppose to be of + format. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + + required: + - compatible + - interrupts + + oneOf: + - required: + - clocks + - required: + - clock-frequency + + additionalProperties: false + +unevaluatedProperties: false + +required: + - compatible + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include + #include + + interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + mti,reserved-cpu-vectors = <7>; + mti,reserved-ipi-vectors = <40 8>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clock-frequency = <50000000>; + }; + }; + - | + #include + #include + + interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clocks = <&cpu_pll>; + }; + }; + - | + interrupt-controller { + compatible = "mti,gic"; + interrupt-controller; + #interrupt-cells = <3>; + }; +...