diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 32cb6718bb17..db3d2790aeec 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -3284,7 +3284,7 @@ static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port, * Configures the ETS elements. */ #define MLXSW_REG_QEEC_ID 0x400D -#define MLXSW_REG_QEEC_LEN 0x1C +#define MLXSW_REG_QEEC_LEN 0x20 MLXSW_REG_DEFINE(qeec, MLXSW_REG_QEEC_ID, MLXSW_REG_QEEC_LEN); @@ -3326,6 +3326,15 @@ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8); */ MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8); +/* reg_qeec_mise + * Min shaper configuration enable. Enables configuration of the min + * shaper on this ETS element + * 0 - Disable + * 1 - Enable + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1); + enum { MLXSW_REG_QEEC_BYTES_MODE, MLXSW_REG_QEEC_PACKETS_MODE, @@ -3342,6 +3351,17 @@ enum { */ MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1); +/* The smallest permitted min shaper rate. */ +#define MLXSW_REG_QEEC_MIS_MIN 200000 /* Kbps */ + +/* reg_qeec_min_shaper_rate + * Min shaper information rate. + * For CPU port, can only be configured for port hierarchy. + * When in bytes mode, value is specified in units of 1000bps. + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, min_shaper_rate, 0x0C, 0, 28); + /* reg_qeec_mase * Max shaper configuration enable. Enables configuration of the max * shaper on this ETS element. diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 8a4983adae94..a2df12b79f8e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2740,6 +2740,21 @@ int mlxsw_sp_port_ets_maxrate_set(struct mlxsw_sp_port *mlxsw_sp_port, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qeec), qeec_pl); } +static int mlxsw_sp_port_min_bw_set(struct mlxsw_sp_port *mlxsw_sp_port, + enum mlxsw_reg_qeec_hr hr, u8 index, + u8 next_index, u32 minrate) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char qeec_pl[MLXSW_REG_QEEC_LEN]; + + mlxsw_reg_qeec_pack(qeec_pl, mlxsw_sp_port->local_port, hr, index, + next_index); + mlxsw_reg_qeec_mise_set(qeec_pl, true); + mlxsw_reg_qeec_min_shaper_rate_set(qeec_pl, minrate); + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qeec), qeec_pl); +} + int mlxsw_sp_port_prio_tc_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 switch_prio, u8 tclass) { @@ -2817,6 +2832,16 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port) return err; } + /* Configure the min shaper for multicast TCs. */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + err = mlxsw_sp_port_min_bw_set(mlxsw_sp_port, + MLXSW_REG_QEEC_HIERARCY_TC, + i + 8, i, + MLXSW_REG_QEEC_MIS_MIN); + if (err) + return err; + } + /* Map all priorities to traffic class 0. */ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { err = mlxsw_sp_port_prio_tc_set(mlxsw_sp_port, i, 0); diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index 0150bb2741eb..117f6f35d72f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -25,24 +25,24 @@ # Thus we set MTU to 10K on all involved interfaces. Then both unicast and # multicast traffic uses 8K frames. # -# +-----------------------+ +----------------------------------+ -# | H1 | | H2 | -# | | | unicast --> + $h2.111 | -# | | | traffic | 192.0.2.129/28 | -# | multicast | | | e-qos-map 0:1 | -# | traffic | | | | -# | $h1 + <----- | | + $h2 | -# +-----|-----------------+ +--------------|-------------------+ -# | | -# +-----|-------------------------------------------------|-------------------+ -# | + $swp1 + $swp2 | -# | | >1Gbps | >1Gbps | -# | +---|----------------+ +----------|----------------+ | -# | | + $swp1.1 | | + $swp2.111 | | +# +---------------------------+ +----------------------------------+ +# | H1 | | H2 | +# | | | unicast --> + $h2.111 | +# | multicast | | traffic | 192.0.2.129/28 | +# | traffic | | | e-qos-map 0:1 | +# | $h1 + <----- | | | | +# | 192.0.2.65/28 | | | + $h2 | +# +---------------|-----------+ +--------------|-------------------+ +# | | +# +---------------|---------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +-------------|------+ +----------|----------------+ | +# | | $swp1.1 + | | + $swp2.111 | | # | | BR1 | SW | BR111 | | -# | | + $swp3.1 | | + $swp3.111 | | -# | +---|----------------+ +----------|----------------+ | -# | \_________________________________________________/ | +# | | $swp3.1 + | | + $swp3.111 | | +# | +-------------|------+ +----------|----------------+ | +# | \_______________________________________/ | # | | | # | + $swp3 | # | | 1Gbps bottleneck | @@ -51,6 +51,7 @@ # | # +--|-----------------+ # | + $h3 H3 | +# | | 192.0.2.66/28 | # | | | # | + $h3.111 | # | 192.0.2.130/28 | @@ -59,6 +60,7 @@ ALL_TESTS=" ping_ipv4 test_mc_aware + test_uc_aware " lib_dir=$(dirname $0)/../../../net/forwarding @@ -68,14 +70,14 @@ source $lib_dir/lib.sh h1_create() { - simple_if_init $h1 + simple_if_init $h1 192.0.2.65/28 mtu_set $h1 10000 } h1_destroy() { mtu_restore $h1 - simple_if_fini $h1 + simple_if_fini $h1 192.0.2.65/28 } h2_create() @@ -97,7 +99,7 @@ h2_destroy() h3_create() { - simple_if_init $h3 + simple_if_init $h3 192.0.2.66/28 mtu_set $h3 10000 vlan_create $h3 111 v$h3 192.0.2.130/28 @@ -108,7 +110,7 @@ h3_destroy() vlan_destroy $h3 111 mtu_restore $h3 - simple_if_fini $h3 + simple_if_fini $h3 192.0.2.66/28 } switch_create() @@ -251,7 +253,7 @@ measure_uc_rate() # average ingress rate to somewhat mitigate this. local min_ingress=2147483648 - mausezahn $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ + $MZ $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ -a own -b $h3mac -t udp -q & sleep 1 @@ -291,7 +293,7 @@ test_mc_aware() check_err $? "Could not get high enough UC-only ingress rate" local ucth1=${uc_rate[1]} - mausezahn $h1 -p 8000 -c 0 -a own -b bc -t udp -q & + $MZ $h1 -p 8000 -c 0 -a own -b bc -t udp -q & local d0=$(date +%s) local t0=$(ethtool_stats_get $h3 rx_octets_prio_0) @@ -311,7 +313,7 @@ test_mc_aware() ret = 100 * ($ucth1 - $ucth2) / $ucth1 if (ret > 0) { ret } else { 0 } ") - check_err $(bc <<< "$deg > 10") + check_err $(bc <<< "$deg > 25") local interval=$((d1 - d0)) local mc_ir=$(rate $u0 $u1 $interval) @@ -335,6 +337,51 @@ test_mc_aware() echo " egress UC throughput $(humanize ${uc_rate_2[1]})" echo " ingress MC throughput $(humanize $mc_ir)" echo " egress MC throughput $(humanize $mc_er)" + echo +} + +test_uc_aware() +{ + RET=0 + + $MZ $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ + -a own -b $h3mac -t udp -q & + + local d0=$(date +%s) + local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u0=$(ethtool_stats_get $swp2 rx_octets_prio_1) + sleep 1 + + local attempts=50 + local passes=0 + local i + + for ((i = 0; i < attempts; ++i)); do + if $ARPING -c 1 -I $h1 -b 192.0.2.66 -q -w 0.1; then + ((passes++)) + fi + + sleep 0.1 + done + + local d1=$(date +%s) + local t1=$(ethtool_stats_get $h3 rx_octets_prio_1) + local u1=$(ethtool_stats_get $swp2 rx_octets_prio_1) + + local interval=$((d1 - d0)) + local uc_ir=$(rate $u0 $u1 $interval) + local uc_er=$(rate $t0 $t1 $interval) + + ((attempts == passes)) + check_err $? + + # Suppress noise from killing mausezahn. + { kill %% && wait; } 2>/dev/null + + log_test "MC performace under UC overload" + echo " ingress UC throughput $(humanize ${uc_ir})" + echo " egress UC throughput $(humanize ${uc_er})" + echo " sent $attempts BC ARPs, got $passes responses" } trap cleanup EXIT