leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tg3: Move phylib report to end of tg3_init_one

Browse Source 
Currently, phylib reports appear with a eth%d prefix.  Move the line
after register_netdev() and place it alongside the other informative
messages.  Update nearby informative messages accordingly.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Matt Carlson 2008-11-03 16:52:56 -08:00 committed by David S. Miller
parent b2b98d4acc
commit df59c94035
1 changed files with 17 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/net/tg3.c
View File

@ -1360,10 +1360,6 @@ static int tg3_phy_init(struct tg3 *tp)
phydev->advertising = phydev->supported;
printk(KERN_INFO
"%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
tp->dev->name, phydev->drv->name, phydev->dev.bus_id);
return 0;
}
@ -13547,26 +13543,34 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
goto err_out_apeunmap;
}
printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] "
"(%s) %s Ethernet %pM\n",
printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
dev->name,
tp->board_part_number,
tp->pci_chip_rev_id,
tg3_phy_string(tp),
tg3_bus_string(tp, str),
((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
"10/100/1000Base-T")),
dev->dev_addr);
printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] "
"MIirq[%d] ASF[%d] WireSpeed[%d] TSOcap[%d]\n",
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)
printk(KERN_INFO
"%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
tp->dev->name,
tp->mdio_bus->phy_map[PHY_ADDR]->drv->name,
tp->mdio_bus->phy_map[PHY_ADDR]->dev.bus_id);
else
printk(KERN_INFO
"%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
tp->dev->name, tg3_phy_string(tp),
((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
"10/100/1000Base-T")),
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
dev->name,
(tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
(tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
(tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
dev->name, tp->dma_rwctrl,