drm/bridge: tc358767: add drm_panel_bridge support

With the bridge operations implemented the last step to prepare
this driver for a chained setup is the use of the bridge panel driver.

The bridge panel driver is only used when a port@2 is present in
the DT. So when the display driver requests a connector
support both situations:
- connector created by bridge panel driver
- connector created by this driver

And on top, support that the display driver creates the connector,
which is the preferred setup.

Note: the bridge panel will use the connector type from the panel.

v3:
  - Fix wrong logic in connector creation (Laurent)

v2:
  - Merge connector and drm_panel_bridge patches
    and fix so we do not create two connectors (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-4-sam@ravnborg.org
This commit is contained in:
Sam Ravnborg 2020-07-27 19:03:18 +02:00
parent 731f4badcb
commit de5e6c027a

View File

@ -244,8 +244,8 @@ struct tc_data {
struct drm_dp_aux aux;
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
struct drm_connector connector;
struct drm_panel *panel;
/* link settings */
struct tc_edp_link link;
@ -1234,13 +1234,6 @@ static int tc_stream_disable(struct tc_data *tc)
return 0;
}
static void tc_bridge_pre_enable(struct drm_bridge *bridge)
{
struct tc_data *tc = bridge_to_tc(bridge);
drm_panel_prepare(tc->panel);
}
static void tc_bridge_enable(struct drm_bridge *bridge)
{
struct tc_data *tc = bridge_to_tc(bridge);
@ -1264,8 +1257,6 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
tc_main_link_disable(tc);
return;
}
drm_panel_enable(tc->panel);
}
static void tc_bridge_disable(struct drm_bridge *bridge)
@ -1273,8 +1264,6 @@ static void tc_bridge_disable(struct drm_bridge *bridge)
struct tc_data *tc = bridge_to_tc(bridge);
int ret;
drm_panel_disable(tc->panel);
ret = tc_stream_disable(tc);
if (ret < 0)
dev_err(tc->dev, "main link stream stop error: %d\n", ret);
@ -1284,13 +1273,6 @@ static void tc_bridge_disable(struct drm_bridge *bridge)
dev_err(tc->dev, "main link disable error: %d\n", ret);
}
static void tc_bridge_post_disable(struct drm_bridge *bridge)
{
struct tc_data *tc = bridge_to_tc(bridge);
drm_panel_unprepare(tc->panel);
}
static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
struct drm_display_mode *adj)
@ -1354,9 +1336,11 @@ static int tc_connector_get_modes(struct drm_connector *connector)
return 0;
}
num_modes = drm_panel_get_modes(tc->panel, connector);
if (num_modes > 0)
return num_modes;
if (tc->panel_bridge) {
num_modes = drm_bridge_get_modes(tc->panel_bridge, connector);
if (num_modes > 0)
return num_modes;
}
edid = tc_get_edid(&tc->bridge, connector);
num_modes = drm_add_edid_modes(connector, edid);
@ -1396,7 +1380,7 @@ tc_connector_detect(struct drm_connector *connector, bool force)
if (tc->hpd_pin >= 0)
return tc_bridge_detect(&tc->bridge);
if (tc->panel)
if (tc->panel_bridge)
return connector_status_connected;
else
return connector_status_unknown;
@ -1419,16 +1403,20 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
struct drm_device *drm = bridge->dev;
int ret;
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
DRM_ERROR("Fix bridge driver to make connector optional!");
return -EINVAL;
if (tc->panel_bridge) {
/* If a connector is required then this driver shall create it */
ret = drm_bridge_attach(tc->bridge.encoder, tc->panel_bridge,
&tc->bridge, flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
if (ret)
return ret;
}
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
return 0;
/* Create DP/eDP connector */
drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
tc->panel ? DRM_MODE_CONNECTOR_eDP :
DRM_MODE_CONNECTOR_DisplayPort);
ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, tc->bridge.type);
if (ret)
return ret;
@ -1441,9 +1429,6 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
DRM_CONNECTOR_POLL_DISCONNECT;
}
if (tc->panel)
drm_panel_attach(tc->panel, &tc->connector);
drm_display_info_set_bus_formats(&tc->connector.display_info,
&bus_format, 1);
tc->connector.display_info.bus_flags =
@ -1459,10 +1444,8 @@ static const struct drm_bridge_funcs tc_bridge_funcs = {
.attach = tc_bridge_attach,
.mode_valid = tc_mode_valid,
.mode_set = tc_bridge_mode_set,
.pre_enable = tc_bridge_pre_enable,
.enable = tc_bridge_enable,
.disable = tc_bridge_disable,
.post_disable = tc_bridge_post_disable,
.mode_fixup = tc_bridge_mode_fixup,
.detect = tc_bridge_detect,
.get_edid = tc_get_edid,
@ -1555,6 +1538,7 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct drm_panel *panel;
struct tc_data *tc;
int ret;
@ -1565,10 +1549,23 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
tc->dev = dev;
/* port@2 is the output port */
ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &tc->panel, NULL);
ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL);
if (ret && ret != -ENODEV)
return ret;
if (panel) {
struct drm_bridge *panel_bridge;
panel_bridge = devm_drm_panel_bridge_add(dev, panel);
if (IS_ERR(panel_bridge))
return PTR_ERR(panel_bridge);
tc->panel_bridge = panel_bridge;
tc->bridge.type = DRM_MODE_CONNECTOR_eDP;
} else {
tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
}
/* Shut down GPIO is optional */
tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
if (IS_ERR(tc->sd_gpio))