Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux

Pull more clock framework updates from Mike Turquette:
 "This contains the second half the of the clk changes for 3.16.

  They are simply fixes and code refactoring for the OMAP clock drivers.
  The sunxi clock driver changes include splitting out the one
  mega-driver into several smaller pieces and adding support for the A31
  SoC clocks"

* tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
  clk: sunxi: document PRCM clock compatible strings
  clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
  clk: sun6i: Protect SDRAM gating bit
  clk: sun6i: Protect CPU clock
  clk: sunxi: Rework clock protection code
  clk: sunxi: Move the GMAC clock to a file of its own
  clk: sunxi: Move the 24M oscillator to a file of its own
  clk: sunxi: Remove calls to clk_put
  clk: sunxi: document new A31 USB clock compatible
  clk: sunxi: Implement A31 USB clock
  ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies
  CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
  ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
  CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck
  CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)
  dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings
  ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock
  CLK: TI: gate: add composite interface clock to OMAP2 only build
  ARM: OMAP2: clock: add DT boot support for cpufreq_ck
  CLK: TI: OMAP2: add clock init support
  ...

arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c

@@ -208,3 +208,56 @@ void omap2xxx_clkt_vps_late_init(void)
 		clk_put(c);
 	}
 }
+
+#ifdef CONFIG_OF
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+static const struct clk_ops virt_prcm_set_ops = {
+	.recalc_rate	= &omap2_table_mpu_recalc,
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+/**
+ * omap2xxx_clkt_vps_init - initialize virt_prcm_set clock
+ *
+ * Does a manual init for the virtual prcm DVFS clock for OMAP2. This
+ * function is called only from omap2 DT clock init, as the virtual
+ * node is not modelled in the DT clock data.
+ */
+void omap2xxx_clkt_vps_init(void)
+{
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *hw = NULL;
+	struct clk *clk;
+	const char *parent_name = "mpu_ck";
+	struct clk_lookup *lookup = NULL;
+
+	omap2xxx_clkt_vps_late_init();
+	omap2xxx_clkt_vps_check_bootloader_rates();
+
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	lookup = kzalloc(sizeof(*lookup), GFP_KERNEL);
+	if (!hw || !lookup)
+		goto cleanup;
+	init.name = "virt_prcm_set";
+	init.ops = &virt_prcm_set_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	hw->hw.init = &init;
+
+	clk = clk_register(NULL, &hw->hw);
+
+	lookup->dev_id = NULL;
+	lookup->con_id = "cpufreq_ck";
+	lookup->clk = clk;
+
+	clkdev_add(lookup);
+	return;
+cleanup:
+	kfree(hw);
+	kfree(lookup);
+}
+#endif

arch/arm/mach-omap2/clock.h

@@ -178,17 +178,6 @@ struct clksel {
 	const struct clksel_rate *rates;
 };
 
-struct clk_hw_omap_ops {
-	void			(*find_idlest)(struct clk_hw_omap *oclk,
-					void __iomem **idlest_reg,
-					u8 *idlest_bit, u8 *idlest_val);
-	void			(*find_companion)(struct clk_hw_omap *oclk,
-					void __iomem **other_reg,
-					u8 *other_bit);
-	void			(*allow_idle)(struct clk_hw_omap *oclk);
-	void			(*deny_idle)(struct clk_hw_omap *oclk);
-};
-
 unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
 					unsigned long parent_rate);
 
@@ -279,8 +268,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
-extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
 
 /* clksel_rate blocks shared between OMAP44xx and AM33xx */
 extern const struct clksel_rate div_1_0_rates[];

arch/arm/mach-omap2/clock2xxx.h

@@ -21,10 +21,6 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
 				      unsigned long parent_rate);
 unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
 				   unsigned long parent_rate);
-unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate);
-int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
-			     unsigned long parent_rate);
 void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
 unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw,
 				      unsigned long parent_rate);

arch/arm/mach-omap2/dpll3xxx.c

@@ -319,6 +319,15 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 
 	/* Set DPLL multiplier, divider */
 	v = omap2_clk_readl(clk, dd->mult_div1_reg);
+
+	/* Handle Duty Cycle Correction */
+	if (dd->dcc_mask) {
+		if (dd->last_rounded_rate >= dd->dcc_rate)
+			v |= dd->dcc_mask; /* Enable DCC */
+		else
+			v &= ~dd->dcc_mask; /* Disable DCC */
+	}
+
 	v &= ~(dd->mult_mask | dd->div1_mask);
 	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
 	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);