ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes

Currently BCLK inverting is only handled when the DAI format is
DSP, but the BCLK may be inverted in any supported mode. Without
this using this CODEC in any other mode than DSP with the BCLK
inverted leads to bad sampling timing and very poor audio quality.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Andrew F. Davis 2017-11-29 15:32:54 -06:00 committed by Mark Brown
parent 77f8b3cfc3
commit dcb407b257
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0

View File

@ -938,6 +938,18 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
return -EINVAL;
}
/* signal polarity */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
iface_reg2 |= AIC31XX_BCLKINV_MASK;
break;
default:
dev_err(codec->dev, "Invalid DAI clock signal polarity\n");
return -EINVAL;
}
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
@ -945,16 +957,12 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai,
case SND_SOC_DAIFMT_DSP_A:
dsp_a_val = 0x1; /* fall through */
case SND_SOC_DAIFMT_DSP_B:
/* NOTE: BCLKINV bit value 1 equas NB and 0 equals IB */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
iface_reg2 |= AIC31XX_BCLKINV_MASK;
break;
case SND_SOC_DAIFMT_IB_NF:
break;
default:
return -EINVAL;
}
/*
* NOTE: This CODEC samples on the falling edge of BCLK in
* DSP mode, this is inverted compared to what most DAIs
* expect, so we invert for this mode
*/
iface_reg2 ^= AIC31XX_BCLKINV_MASK;
iface_reg1 |= (AIC31XX_DSP_MODE <<
AIC31XX_IFACE1_DATATYPE_SHIFT);
break;