diff --git a/MAINTAINERS b/MAINTAINERS
index 7c85c4d35b59..777cd6fa2b3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16008,14 +16008,6 @@ F:	Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
 F:	drivers/misc/fastrpc.c
 F:	include/uapi/misc/fastrpc.h
 
-QUALCOMM GENERIC INTERFACE I2C DRIVER
-M:	Akash Asthana <akashast@codeaurora.org>
-M:	Mukesh Savaliya <msavaliy@codeaurora.org>
-L:	linux-i2c@vger.kernel.org
-L:	linux-arm-msm@vger.kernel.org
-S:	Supported
-F:	drivers/i2c/busses/i2c-qcom-geni.c
-
 QUALCOMM HEXAGON ARCHITECTURE
 M:	Brian Cain <bcain@codeaurora.org>
 L:	linux-hexagon@vger.kernel.org
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 42da31c1ab70..8a6c6ee28556 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -488,7 +488,7 @@ config I2C_BRCMSTB
 
 config I2C_CADENCE
 	tristate "Cadence I2C Controller"
-	depends on ARCH_ZYNQ || ARM64 || XTENSA
+	depends on ARCH_ZYNQ || ARM64 || XTENSA || COMPILE_TEST
 	help
 	  Say yes here to select Cadence I2C Host Controller. This controller is
 	  e.g. used by Xilinx Zynq.
@@ -680,7 +680,7 @@ config I2C_IMG
 
 config I2C_IMX
 	tristate "IMX I2C interface"
-	depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
+	depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE || COMPILE_TEST
 	select I2C_SLAVE
 	help
 	  Say Y here if you want to use the IIC bus controller on
@@ -935,7 +935,7 @@ config I2C_QCOM_GENI
 
 config I2C_QUP
 	tristate "Qualcomm QUP based I2C controller"
-	depends on ARCH_QCOM
+	depends on ARCH_QCOM || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Qualcomm SoCs.
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index dfc534065595..5149454eef4a 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -23,6 +23,11 @@
 #define BCM2835_I2C_FIFO	0x10
 #define BCM2835_I2C_DIV		0x14
 #define BCM2835_I2C_DEL		0x18
+/*
+ * 16-bit field for the number of SCL cycles to wait after rising SCL
+ * before deciding the slave is not responding. 0 disables the
+ * timeout detection.
+ */
 #define BCM2835_I2C_CLKT	0x1c
 
 #define BCM2835_I2C_C_READ	BIT(0)
@@ -474,6 +479,12 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->quirks = of_device_get_match_data(&pdev->dev);
 
+	/*
+	 * Disable the hardware clock stretching timeout. SMBUS
+	 * specifies a limit for how long the device can stretch the
+	 * clock, but core I2C doesn't.
+	 */
+	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_CLKT, 0);
 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
 
 	ret = i2c_add_adapter(adap);
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 490ee3962645..b00f35c0b066 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -673,7 +673,7 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 
 	/* set the data in/out register size for compatible SoCs */
 	if (of_device_is_compatible(dev->device->of_node,
-				    "brcmstb,brcmper-i2c"))
+				    "brcm,brcmper-i2c"))
 		dev->data_regsz = sizeof(u8);
 	else
 		dev->data_regsz = sizeof(u32);
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
index c1de8eb66169..cf54f1cb4c57 100644
--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -558,7 +558,7 @@ static int cci_probe(struct platform_device *pdev)
 		cci->master[idx].adap.quirks = &cci->data->quirks;
 		cci->master[idx].adap.algo = &cci_algo;
 		cci->master[idx].adap.dev.parent = dev;
-		cci->master[idx].adap.dev.of_node = child;
+		cci->master[idx].adap.dev.of_node = of_node_get(child);
 		cci->master[idx].master = idx;
 		cci->master[idx].cci = cci;
 
@@ -643,8 +643,10 @@ static int cci_probe(struct platform_device *pdev)
 			continue;
 
 		ret = i2c_add_adapter(&cci->master[i].adap);
-		if (ret < 0)
+		if (ret < 0) {
+			of_node_put(cci->master[i].adap.dev.of_node);
 			goto error_i2c;
+		}
 	}
 
 	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
@@ -655,9 +657,11 @@ static int cci_probe(struct platform_device *pdev)
 	return 0;
 
 error_i2c:
-	for (; i >= 0; i--) {
-		if (cci->master[i].cci)
+	for (--i ; i >= 0; i--) {
+		if (cci->master[i].cci) {
 			i2c_del_adapter(&cci->master[i].adap);
+			of_node_put(cci->master[i].adap.dev.of_node);
+		}
 	}
 error:
 	disable_irq(cci->irq);
@@ -673,8 +677,10 @@ static int cci_remove(struct platform_device *pdev)
 	int i;
 
 	for (i = 0; i < cci->data->num_masters; i++) {
-		if (cci->master[i].cci)
+		if (cci->master[i].cci) {
 			i2c_del_adapter(&cci->master[i].adap);
+			of_node_put(cci->master[i].adap.dev.of_node);
+		}
 		cci_halt(cci, i);
 	}