forked from Minki/linux
Devicetree updates for v6.0:
Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm CCN
PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and arm-firmware-suite
bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM memory
region, Samsung S5PV210 ChipID, EM Microelectronic EM3027 RTC, and
arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail
-----BEGIN PGP SIGNATURE-----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=8/kk
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
This commit is contained in:
Linus Torvalds
commit
da8d07af4b
|
|
@ -138,6 +138,7 @@ properties:
|
|||
- arm,cortex-a76
|
||||
- arm,cortex-a77
|
||||
- arm,cortex-a78
|
||||
- arm,cortex-a78ae
|
||||
- arm,cortex-a510
|
||||
- arm,cortex-a710
|
||||
- arm,cortex-m0
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ system, notifying them when a low power state is entered or exited.
|
|||
Multiple revisions of the SAW hardware are supported using these Device Nodes.
|
||||
SAW2 revisions differ in the register offset and configuration data. Also, the
|
||||
same revision of the SAW in different SoCs may have different configuration
|
||||
data due the the differences in hardware capabilities. Hence the SoC name, the
|
||||
data due the differences in hardware capabilities. Hence the SoC name, the
|
||||
version of the SAW hardware in that SoC and the distinction between cpu (big
|
||||
or Little) or cache, may be needed to uniquely identify the SAW register
|
||||
configuration and initialization data. The compatible string is used to
|
||||
|
|
|
|||
|
|
@ -208,7 +208,7 @@ properties:
|
|||
"^[a-z0-9]+$":
|
||||
type: object
|
||||
|
||||
patternProperties:
|
||||
properties:
|
||||
clocks:
|
||||
minItems: 1
|
||||
maxItems: 8
|
||||
|
|
|
|||
|
|
@ -29,6 +29,13 @@ properties:
|
|||
|
||||
ranges: true
|
||||
|
||||
gpio-controller:
|
||||
deprecated: true
|
||||
|
||||
"#gpio-cells":
|
||||
deprecated: true
|
||||
const: 2
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
|
|
@ -67,8 +74,7 @@ patternProperties:
|
|||
|
||||
required:
|
||||
- compatible
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- reg
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
|
|||
|
|
@ -1,63 +0,0 @@
|
|||
Binding for CEVA AHCI SATA Controller
|
||||
|
||||
Required properties:
|
||||
- reg: Physical base address and size of the controller's register area.
|
||||
- compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
|
||||
- clocks: Input clock specifier. Refer to common clock bindings.
|
||||
- interrupts: Interrupt specifier. Refer to interrupt binding.
|
||||
- ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
|
||||
- ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
|
||||
The fields for the above parameter must be as shown below:
|
||||
ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
|
||||
CINMP : COMINIT Negate Minimum Period.
|
||||
CIBGN : COMINIT Burst Gap Nominal.
|
||||
CIBGMX: COMINIT Burst Gap Maximum.
|
||||
CIBGMN: COMINIT Burst Gap Minimum.
|
||||
- ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
|
||||
- ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
|
||||
The fields for the above parameter must be as shown below:
|
||||
ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
|
||||
CWBGMN: COMWAKE Burst Gap Minimum.
|
||||
CWBGMX: COMWAKE Burst Gap Maximum.
|
||||
CWBGN: COMWAKE Burst Gap Nominal.
|
||||
CWNMP: COMWAKE Negate Minimum Period.
|
||||
- ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
|
||||
- ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
|
||||
The fields for the above parameter must be as shown below:
|
||||
ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
|
||||
BMX: COM Burst Maximum.
|
||||
BNM: COM Burst Nominal.
|
||||
SFD: Signal Failure Detection value.
|
||||
PTST: Partial to Slumber timer value.
|
||||
- ceva,p0-retry-params: Retry interval timing value for port 0.
|
||||
- ceva,p1-retry-params: Retry interval timing value for port 1.
|
||||
The fields for the above parameter must be as shown below:
|
||||
ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
|
||||
RIT: Retry Interval Timer.
|
||||
RCT: Rate Change Timer.
|
||||
|
||||
Optional properties:
|
||||
- ceva,broken-gen2: limit to gen1 speed instead of gen2.
|
||||
- phys: phandle for the PHY device
|
||||
- resets: phandle to the reset controller for the SATA IP
|
||||
|
||||
Examples:
|
||||
ahci@fd0c0000 {
|
||||
compatible = "ceva,ahci-1v84";
|
||||
reg = <0xfd0c0000 0x200>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 133 4>;
|
||||
clocks = <&clkc SATA_CLK_ID>;
|
||||
ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
|
||||
ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
|
||||
ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
|
||||
ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
|
||||
|
||||
ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
|
||||
ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
|
||||
ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
|
||||
ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
|
||||
ceva,broken-gen2;
|
||||
phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
|
||||
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
|
||||
};
|
||||
189
Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
Normal file
189
Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
Normal file
|
|
@ -0,0 +1,189 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Ceva AHCI SATA Controller
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@xilinx.com>
|
||||
|
||||
description: |
|
||||
The Ceva SATA controller mostly conforms to the AHCI interface with some
|
||||
special extensions to add functionality, is a high-performance dual-port
|
||||
SATA host controller with an AHCI compliant command layer which supports
|
||||
advanced features such as native command queuing and frame information
|
||||
structure (FIS) based switching for systems employing port multipliers.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ceva,ahci-1v84
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
dma-coherent: true
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
iommus:
|
||||
maxItems: 1
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
ceva,p0-cominit-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description: |
|
||||
OOB timing value for COMINIT parameter for port 0.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
|
||||
items:
|
||||
- description: CINMP - COMINIT Negate Minimum Period.
|
||||
- description: CIBGN - COMINIT Burst Gap Nominal.
|
||||
- description: CIBGMX - COMINIT Burst Gap Maximum.
|
||||
- description: CIBGMN - COMINIT Burst Gap Minimum.
|
||||
|
||||
ceva,p0-comwake-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description: |
|
||||
OOB timing value for COMWAKE parameter for port 0.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
|
||||
items:
|
||||
- description: CWBGMN - COMWAKE Burst Gap Minimum.
|
||||
- description: CWBGMX - COMWAKE Burst Gap Maximum.
|
||||
- description: CWBGN - COMWAKE Burst Gap Nominal.
|
||||
- description: CWNMP - COMWAKE Negate Minimum Period.
|
||||
|
||||
ceva,p0-burst-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description: |
|
||||
Burst timing value for COM parameter for port 0.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
|
||||
items:
|
||||
- description: BMX - COM Burst Maximum.
|
||||
- description: BNM - COM Burst Nominal.
|
||||
- description: SFD - Signal Failure Detection value.
|
||||
- description: PTST - Partial to Slumber timer value.
|
||||
|
||||
ceva,p0-retry-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint16-array
|
||||
description: |
|
||||
Retry interval timing value for port 0.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
|
||||
items:
|
||||
- description: RIT - Retry Interval Timer.
|
||||
- description: RCT - Rate Change Timer.
|
||||
|
||||
ceva,p1-cominit-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description: |
|
||||
OOB timing value for COMINIT parameter for port 1.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
|
||||
items:
|
||||
- description: CINMP - COMINIT Negate Minimum Period.
|
||||
- description: CIBGN - COMINIT Burst Gap Nominal.
|
||||
- description: CIBGMX - COMINIT Burst Gap Maximum.
|
||||
- description: CIBGMN - COMINIT Burst Gap Minimum.
|
||||
|
||||
ceva,p1-comwake-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description: |
|
||||
OOB timing value for COMWAKE parameter for port 1.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
|
||||
items:
|
||||
- description: CWBGMN - COMWAKE Burst Gap Minimum.
|
||||
- description: CWBGMX - COMWAKE Burst Gap Maximum.
|
||||
- description: CWBGN - COMWAKE Burst Gap Nominal.
|
||||
- description: CWNMP - COMWAKE Negate Minimum Period.
|
||||
|
||||
ceva,p1-burst-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description: |
|
||||
Burst timing value for COM parameter for port 1.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
|
||||
items:
|
||||
- description: BMX - COM Burst Maximum.
|
||||
- description: BNM - COM Burst Nominal.
|
||||
- description: SFD - Signal Failure Detection value.
|
||||
- description: PTST - Partial to Slumber timer value.
|
||||
|
||||
ceva,p1-retry-params:
|
||||
$ref: /schemas/types.yaml#/definitions/uint16-array
|
||||
description: |
|
||||
Retry interval timing value for port 1.
|
||||
The fields for the above parameter must be as shown below:-
|
||||
ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
|
||||
items:
|
||||
- description: RIT - Retry Interval Timer.
|
||||
- description: RCT - Rate Change Timer.
|
||||
|
||||
ceva,broken-gen2:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: |
|
||||
limit to gen1 speed instead of gen2.
|
||||
|
||||
phys:
|
||||
maxItems: 1
|
||||
|
||||
phy-names:
|
||||
items:
|
||||
- const: sata-phy
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- interrupts
|
||||
- ceva,p0-cominit-params
|
||||
- ceva,p0-comwake-params
|
||||
- ceva,p0-burst-params
|
||||
- ceva,p0-retry-params
|
||||
- ceva,p1-cominit-params
|
||||
- ceva,p1-comwake-params
|
||||
- ceva,p1-burst-params
|
||||
- ceva,p1-retry-params
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/power/xlnx-zynqmp-power.h>
|
||||
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
|
||||
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
sata: ahci@fd0c0000 {
|
||||
compatible = "ceva,ahci-1v84";
|
||||
reg = <0xfd0c0000 0x200>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&zynqmp_clk SATA_REF>;
|
||||
ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
|
||||
ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
|
||||
ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
|
||||
ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
|
||||
ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
|
||||
ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
|
||||
ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
|
||||
ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
|
||||
ceva,broken-gen2;
|
||||
phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
|
||||
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
|
||||
};
|
||||
|
|
@ -28,11 +28,9 @@ properties:
|
|||
- const: qcom,ssc-block-bus
|
||||
|
||||
reg:
|
||||
description: |
|
||||
Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1
|
||||
registers
|
||||
minItems: 2
|
||||
maxItems: 2
|
||||
items:
|
||||
- description: SSCAON_CONFIG0 registers
|
||||
- description: SSCAON_CONFIG1 registers
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
|
|
@ -48,7 +46,6 @@ properties:
|
|||
ranges: true
|
||||
|
||||
clocks:
|
||||
minItems: 6
|
||||
maxItems: 6
|
||||
|
||||
clock-names:
|
||||
|
|
@ -61,9 +58,9 @@ properties:
|
|||
- const: ssc_ahbs
|
||||
|
||||
power-domains:
|
||||
description: Power domain phandles for the ssc_cx and ssc_mx power domains
|
||||
minItems: 2
|
||||
maxItems: 2
|
||||
items:
|
||||
- description: CX power domain
|
||||
- description: MX power domain
|
||||
|
||||
power-domain-names:
|
||||
items:
|
||||
|
|
@ -71,11 +68,11 @@ properties:
|
|||
- const: ssc_mx
|
||||
|
||||
resets:
|
||||
description: |
|
||||
Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the
|
||||
branch control register associated with the ssc_xo and ssc_ahbs clocks)
|
||||
minItems: 2
|
||||
maxItems: 2
|
||||
items:
|
||||
- description: Main reset
|
||||
- description:
|
||||
SSC Branch Control Register reset (associated with the ssc_xo and
|
||||
ssc_ahbs clocks)
|
||||
|
||||
reset-names:
|
||||
items:
|
||||
|
|
|
|||
|
|
@ -1,137 +0,0 @@
|
|||
The chosen node
|
||||
---------------
|
||||
|
||||
The chosen node does not represent a real device, but serves as a place
|
||||
for passing data between firmware and the operating system, like boot
|
||||
arguments. Data in the chosen node does not represent the hardware.
|
||||
|
||||
The following properties are recognized:
|
||||
|
||||
|
||||
kaslr-seed
|
||||
-----------
|
||||
|
||||
This property is used when booting with CONFIG_RANDOMIZE_BASE as the
|
||||
entropy used to randomize the kernel image base address location. Since
|
||||
it is used directly, this value is intended only for KASLR, and should
|
||||
not be used for other purposes (as it may leak information about KASLR
|
||||
offsets). It is parsed as a u64 value, e.g.
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
kaslr-seed = <0xfeedbeef 0xc0def00d>;
|
||||
};
|
||||
};
|
||||
|
||||
Note that if this property is set from UEFI (or a bootloader in EFI
|
||||
mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
|
||||
the Linux EFI stub (which will populate the property itself, using
|
||||
EFI_RNG_PROTOCOL).
|
||||
|
||||
stdout-path
|
||||
-----------
|
||||
|
||||
Device trees may specify the device to be used for boot console output
|
||||
with a stdout-path property under /chosen, as described in the Devicetree
|
||||
Specification, e.g.
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "/serial@f00:115200";
|
||||
};
|
||||
|
||||
serial@f00 {
|
||||
compatible = "vendor,some-uart";
|
||||
reg = <0xf00 0x10>;
|
||||
};
|
||||
};
|
||||
|
||||
If the character ":" is present in the value, this terminates the path.
|
||||
The meaning of any characters following the ":" is device-specific, and
|
||||
must be specified in the relevant binding documentation.
|
||||
|
||||
For UART devices, the preferred binding is a string in the form:
|
||||
|
||||
<baud>{<parity>{<bits>{<flow>}}}
|
||||
|
||||
where
|
||||
|
||||
baud - baud rate in decimal
|
||||
parity - 'n' (none), 'o', (odd) or 'e' (even)
|
||||
bits - number of data bits
|
||||
flow - 'r' (rts)
|
||||
|
||||
For example: 115200n8r
|
||||
|
||||
Implementation note: Linux will look for the property "linux,stdout-path" or
|
||||
on PowerPC "stdout" if "stdout-path" is not found. However, the
|
||||
"linux,stdout-path" and "stdout" properties are deprecated. New platforms
|
||||
should only use the "stdout-path" property.
|
||||
|
||||
linux,booted-from-kexec
|
||||
-----------------------
|
||||
|
||||
This property is set (currently only on PowerPC, and only needed on
|
||||
book3e) by some versions of kexec-tools to tell the new kernel that it
|
||||
is being booted by kexec, as the booting environment may differ (e.g.
|
||||
a different secondary CPU release mechanism)
|
||||
|
||||
linux,usable-memory-range
|
||||
-------------------------
|
||||
|
||||
This property holds a base address and size, describing a limited region in
|
||||
which memory may be considered available for use by the kernel. Memory outside
|
||||
of this range is not available for use.
|
||||
|
||||
This property describes a limitation: memory within this range is only
|
||||
valid when also described through another mechanism that the kernel
|
||||
would otherwise use to determine available memory (e.g. memory nodes
|
||||
or the EFI memory map). Valid memory may be sparse within the range.
|
||||
e.g.
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
The main usage is for crash dump kernel to identify its own usable
|
||||
memory and exclude, at its boot time, any other memory areas that are
|
||||
part of the panicked kernel's memory.
|
||||
|
||||
While this property does not represent a real hardware, the address
|
||||
and the size are expressed in #address-cells and #size-cells,
|
||||
respectively, of the root node.
|
||||
|
||||
linux,elfcorehdr
|
||||
----------------
|
||||
|
||||
This property holds the memory range, the address and the size, of the elf
|
||||
core header which mainly describes the panicked kernel's memory layout as
|
||||
PT_LOAD segments of elf format.
|
||||
e.g.
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
|
||||
};
|
||||
};
|
||||
|
||||
While this property does not represent a real hardware, the address
|
||||
and the size are expressed in #address-cells and #size-cells,
|
||||
respectively, of the root node.
|
||||
|
||||
linux,initrd-start and linux,initrd-end
|
||||
---------------------------------------
|
||||
|
||||
These properties hold the physical start and end address of an initrd that's
|
||||
loaded by the bootloader. Note that linux,initrd-start is inclusive, but
|
||||
linux,initrd-end is exclusive.
|
||||
e.g.
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
linux,initrd-start = <0x82000000>;
|
||||
linux,initrd-end = <0x82800000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "efm32gg,cmu"
|
||||
- reg: Base address and length of the register set
|
||||
- interrupts: Interrupt used by the CMU
|
||||
- #clock-cells: Should be <1>
|
||||
|
||||
The clock consumer should specify the desired clock by having the clock ID in
|
||||
its "clocks" phandle cell. The header efm32-clk.h contains a list of available
|
||||
IDs.
|
||||
|
|
@ -78,7 +78,7 @@ Required properties:
|
|||
- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
|
||||
outputs).
|
||||
|
||||
- clocks : must be set to the parent's phandle. it's could be output clocks of
|
||||
- clocks : must be set to the parent's phandle. it could be output clocks of
|
||||
a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
|
||||
|
||||
- clock-output-names : List of strings used to name the clock outputs.
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ Required properties:
|
|||
- for "ti,da850-pll1", shall be "clksrc"
|
||||
|
||||
Optional properties:
|
||||
- ti,clkmode-square-wave: Indicates that the the board is supplying a square
|
||||
- ti,clkmode-square-wave: Indicates that the board is supplying a square
|
||||
wave input on the OSCIN pin instead of using a crystal oscillator.
|
||||
This property is only valid when compatible = "ti,da850-pll0".
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ functional clock but can be configured to provide different clocks.
|
|||
ATL can maintain a clock averages to some desired frequency based on the bws/aws
|
||||
signals - can compensate the drift between the two ws signal.
|
||||
|
||||
In order to provide the support for ATL and it's output clocks (which can be used
|
||||
In order to provide the support for ATL and its output clocks (which can be used
|
||||
internally within the SoC or external components) two sets of bindings is needed:
|
||||
|
||||
Clock tree binding:
|
||||
|
|
|
|||
|
|
@ -263,11 +263,11 @@ examples:
|
|||
# Micro-USB connector with HS lines routed via controller (MUIC).
|
||||
- |
|
||||
muic-max77843 {
|
||||
usb_con1: connector {
|
||||
compatible = "usb-b-connector";
|
||||
label = "micro-USB";
|
||||
type = "micro";
|
||||
};
|
||||
usb_con1: connector {
|
||||
compatible = "usb-b-connector";
|
||||
label = "micro-USB";
|
||||
type = "micro";
|
||||
};
|
||||
};
|
||||
|
||||
# USB-C connector attached to CC controller (s2mm005), HS lines routed
|
||||
|
|
@ -275,34 +275,34 @@ examples:
|
|||
# DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
|
||||
- |
|
||||
ccic: s2mm005 {
|
||||
usb_con2: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
usb_con2: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
usb_con_hs: endpoint {
|
||||
remote-endpoint = <&max77865_usbc_hs>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
usb_con_hs: endpoint {
|
||||
remote-endpoint = <&max77865_usbc_hs>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
usb_con_ss: endpoint {
|
||||
remote-endpoint = <&usbdrd_phy_ss>;
|
||||
};
|
||||
};
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
usb_con_sbu: endpoint {
|
||||
remote-endpoint = <&dp_aux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
usb_con_ss: endpoint {
|
||||
remote-endpoint = <&usbdrd_phy_ss>;
|
||||
};
|
||||
};
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
usb_con_sbu: endpoint {
|
||||
remote-endpoint = <&dp_aux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
# USB-C connector attached to a typec port controller(ptn5110), which has
|
||||
|
|
@ -310,16 +310,16 @@ examples:
|
|||
- |
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
typec: ptn5110 {
|
||||
usb_con3: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(5000, 12000, 2000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
usb_con3: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(5000, 12000, 2000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
# USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
|
||||
|
|
@ -332,20 +332,20 @@ examples:
|
|||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
hs_ep: endpoint {
|
||||
remote-endpoint = <&usb3_hs_ep>;
|
||||
};
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
hs_ep: endpoint {
|
||||
remote-endpoint = <&usb3_hs_ep>;
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
ss_ep: endpoint {
|
||||
remote-endpoint = <&hd3ss3220_in_ep>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
ss_ep: endpoint {
|
||||
remote-endpoint = <&hd3ss3220_in_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -354,12 +354,12 @@ examples:
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
usb {
|
||||
connector {
|
||||
compatible = "gpio-usb-b-connector", "usb-b-connector";
|
||||
type = "micro";
|
||||
id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
|
||||
vbus-supply = <&usb_p0_vbus>;
|
||||
};
|
||||
connector {
|
||||
compatible = "gpio-usb-b-connector", "usb-b-connector";
|
||||
type = "micro";
|
||||
id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
|
||||
vbus-supply = <&usb_p0_vbus>;
|
||||
};
|
||||
};
|
||||
|
||||
# Micro-USB connector with HS lines routed via controller (MUIC) and MHL
|
||||
|
|
@ -367,27 +367,27 @@ examples:
|
|||
# mobile phone
|
||||
- |
|
||||
muic-max77843 {
|
||||
usb_con4: connector {
|
||||
compatible = "samsung,usb-connector-11pin", "usb-b-connector";
|
||||
label = "micro-USB";
|
||||
type = "micro";
|
||||
usb_con4: connector {
|
||||
compatible = "samsung,usb-connector-11pin", "usb-b-connector";
|
||||
label = "micro-USB";
|
||||
type = "micro";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
muic_to_usb: endpoint {
|
||||
remote-endpoint = <&usb_to_muic>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
muic_to_usb: endpoint {
|
||||
remote-endpoint = <&usb_to_muic>;
|
||||
};
|
||||
};
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
usb_con_mhl: endpoint {
|
||||
remote-endpoint = <&sii8620_mhl>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
usb_con_mhl: endpoint {
|
||||
remote-endpoint = <&sii8620_mhl>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -159,25 +159,12 @@ examples:
|
|||
};
|
||||
|
||||
panel {
|
||||
compatible = "arm,rtsm-display", "panel-dpi";
|
||||
power-supply = <&vcc_supply>;
|
||||
compatible = "arm,rtsm-display";
|
||||
|
||||
port {
|
||||
clcd_panel: endpoint {
|
||||
remote-endpoint = <&clcd_pads>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <25175000>;
|
||||
hactive = <640>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <24>;
|
||||
hsync-len = <96>;
|
||||
vactive = <480>;
|
||||
vback-porch = <32>;
|
||||
vfront-porch = <11>;
|
||||
vsync-len = <2>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
|
|||
|
|
@ -1,78 +0,0 @@
|
|||
sii902x HDMI bridge bindings
|
||||
|
||||
Required properties:
|
||||
- compatible: "sil,sii9022"
|
||||
- reg: i2c address of the bridge
|
||||
|
||||
Optional properties:
|
||||
- interrupts: describe the interrupt line used to inform the host
|
||||
about hotplug events.
|
||||
- reset-gpios: OF device-tree gpio specification for RST_N pin.
|
||||
- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
|
||||
- cvcc12-supply: Digital Core Supply Voltage (1.2V)
|
||||
|
||||
HDMI audio properties:
|
||||
- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
|
||||
is wired, <1> if the both are wired. HDMI audio is
|
||||
configured only if this property is found.
|
||||
- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
|
||||
Each integer indicates which i2s pin is connected to which
|
||||
audio fifo. The first integer selects i2s audio pin for the
|
||||
first audio fifo#0 (HDMI channels 1&2), second for fifo#1
|
||||
(HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
|
||||
pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
|
||||
but there can be no gaps. E.g. an i2s pin must be mapped to
|
||||
fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
|
||||
value is <0>, describing SD0 pin beiging routed to hdmi audio
|
||||
fifo #0.
|
||||
- clocks: phandle and clock specifier for each clock listed in
|
||||
the clock-names property
|
||||
- clock-names: "mclk"
|
||||
Describes SII902x MCLK input. MCLK can be used to produce
|
||||
HDMI audio CTS values. This property follows
|
||||
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
consumer binding.
|
||||
|
||||
If HDMI audio is configured the sii902x device becomes an I2S
|
||||
and/or spdif audio codec component (e.g a digital audio sink),
|
||||
that can be used in configuring a full audio devices with
|
||||
simple-card or audio-graph-card binding. See their binding
|
||||
documents on how to describe the way the sii902x device is
|
||||
connected to the rest of the audio system:
|
||||
Documentation/devicetree/bindings/sound/simple-card.yaml
|
||||
Documentation/devicetree/bindings/sound/audio-graph-card.yaml
|
||||
Note: In case of the audio-graph-card binding the used port
|
||||
index should be 3.
|
||||
|
||||
Optional subnodes:
|
||||
- video input: this subnode can contain a video input port node
|
||||
to connect the bridge to a display controller output (See this
|
||||
documentation [1]).
|
||||
|
||||
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
|
||||
|
||||
Example:
|
||||
hdmi-bridge@39 {
|
||||
compatible = "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
reset-gpios = <&pioA 1 0>;
|
||||
iovcc-supply = <&v3v3_hdmi>;
|
||||
cvcc12-supply = <&v1v2_hdmi>;
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
sil,i2s-data-lanes = < 0 1 2 >;
|
||||
clocks = <&mclk>;
|
||||
clock-names = "mclk";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
bridge_in: endpoint {
|
||||
remote-endpoint = <&dc_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,131 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Silicon Image sii902x HDMI bridge
|
||||
|
||||
maintainers:
|
||||
- Boris Brezillon <bbrezillon@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- enum:
|
||||
- sil,sii9022-cpi # CEC Programming Interface
|
||||
- sil,sii9022-tpi # Transmitter Programming Interface
|
||||
- const: sil,sii9022
|
||||
- const: sil,sii9022
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
description: Interrupt line used to inform the host about hotplug events.
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
iovcc-supply:
|
||||
description: I/O Supply Voltage (1.8V or 3.3V)
|
||||
|
||||
cvcc12-supply:
|
||||
description: Digital Core Supply Voltage (1.2V)
|
||||
|
||||
'#sound-dai-cells':
|
||||
enum: [ 0, 1 ]
|
||||
description: |
|
||||
<0> if only I2S or S/PDIF pin is wired,
|
||||
<1> if both are wired.
|
||||
HDMI audio is configured only if this property is found.
|
||||
If HDMI audio is configured, the sii902x device becomes an I2S and/or
|
||||
S/PDIF audio codec component (e.g. a digital audio sink), that can be
|
||||
used in configuring full audio devices with simple-card or
|
||||
audio-graph-card bindings. See their binding documents on how to describe
|
||||
the way the
|
||||
sii902x device is connected to the rest of the audio system:
|
||||
Documentation/devicetree/bindings/sound/simple-card.yaml
|
||||
Documentation/devicetree/bindings/sound/audio-graph-card.yaml
|
||||
Note: In case of the audio-graph-card binding the used port index should
|
||||
be 3.
|
||||
|
||||
sil,i2s-data-lanes:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
uniqueItems: true
|
||||
items:
|
||||
enum: [ 0, 1, 2, 3 ]
|
||||
description:
|
||||
Each integer indicates which I2S pin is connected to which audio FIFO.
|
||||
The first integer selects the I2S audio pin for the first audio FIFO#0
|
||||
(HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
|
||||
on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
|
||||
connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
|
||||
mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
|
||||
default value is <0>, describing SD0 pin being routed to HDMI audio
|
||||
FIFO#0.
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
|
||||
|
||||
clock-names:
|
||||
const: mclk
|
||||
|
||||
ports:
|
||||
$ref: /schemas/graph.yaml#/properties/ports
|
||||
|
||||
properties:
|
||||
port@0:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
description: Parallel RGB input port
|
||||
|
||||
port@1:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
description: HDMI output port
|
||||
|
||||
port@3:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
description: Sound input port
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hdmi-bridge@39 {
|
||||
compatible = "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
reset-gpios = <&pioA 1 0>;
|
||||
iovcc-supply = <&v3v3_hdmi>;
|
||||
cvcc12-supply = <&v1v2_hdmi>;
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
sil,i2s-data-lanes = < 0 1 2 >;
|
||||
clocks = <&mclk>;
|
||||
clock-names = "mclk";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
bridge_in: endpoint {
|
||||
remote-endpoint = <&dc_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Arm RTSM Virtual Platforms Display
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: panel-common.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: arm,rtsm-display
|
||||
|
||||
port: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- port
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
...
|
||||
|
|
@ -15,13 +15,13 @@ maintainers:
|
|||
|
||||
allOf:
|
||||
- $ref: panel-common.yaml#
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: lg,lg4573
|
||||
|
||||
reg: true
|
||||
spi-max-frequency: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ properties:
|
|||
0 - burst-mode
|
||||
1 - non-burst with sync event
|
||||
2 - non-burst with sync pulse
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2]
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ description:
|
|||
|
||||
allOf:
|
||||
- $ref: panel/panel-common.yaml#
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -49,9 +49,6 @@ properties:
|
|||
vbat-supply:
|
||||
description: The supply for VBAT
|
||||
|
||||
# Only required for SPI
|
||||
spi-max-frequency: true
|
||||
|
||||
solomon,height:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 16
|
||||
|
|
@ -153,6 +150,8 @@ required:
|
|||
- reg
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
|
|
@ -223,7 +222,7 @@ allOf:
|
|||
solomon,dclk-frq:
|
||||
default: 10
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
|
|||
100
Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
Normal file
100
Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
Normal file
|
|
@ -0,0 +1,100 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies Inc BAM DMA controller
|
||||
|
||||
maintainers:
|
||||
- Andy Gross <agross@kernel.org>
|
||||
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: "dma-controller.yaml#"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
# APQ8064, IPQ8064 and MSM8960
|
||||
- qcom,bam-v1.3.0
|
||||
# MSM8974, APQ8074 and APQ8084
|
||||
- qcom,bam-v1.4.0
|
||||
# MSM8916
|
||||
- qcom,bam-v1.7.0
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: bam_clk
|
||||
|
||||
"#dma-cells":
|
||||
const: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
iommus:
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
|
||||
num-channels:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Indicates supported number of DMA channels in a remotely controlled bam.
|
||||
|
||||
qcom,controlled-remotely:
|
||||
type: boolean
|
||||
description:
|
||||
Indicates that the bam is controlled by remote proccessor i.e. execution
|
||||
environment.
|
||||
|
||||
qcom,ee:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 7
|
||||
description:
|
||||
Indicates the active Execution Environment identifier (0-7) used in the
|
||||
secure world.
|
||||
|
||||
qcom,num-ees:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Indicates supported number of Execution Environments in a remotely
|
||||
controlled bam.
|
||||
|
||||
qcom,powered-remotely:
|
||||
type: boolean
|
||||
description:
|
||||
Indicates that the bam is powered up by a remote processor but must be
|
||||
initialized by the local processor.
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- "#dma-cells"
|
||||
- interrupts
|
||||
- qcom,ee
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
|
||||
|
||||
dma-controller@f9944000 {
|
||||
compatible = "qcom,bam-v1.4.0";
|
||||
reg = <0xf9944000 0x15000>;
|
||||
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
...
|
||||
|
|
@ -1,52 +0,0 @@
|
|||
QCOM BAM DMA controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be one of the following:
|
||||
* "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
|
||||
* "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
|
||||
* "qcom,bam-v1.7.0" for MSM8916
|
||||
- reg: Address range for DMA registers
|
||||
- interrupts: Should contain the one interrupt shared by all channels
|
||||
- #dma-cells: must be <1>, the cell in the dmas property of the client device
|
||||
represents the channel number
|
||||
- clocks: required clock
|
||||
- clock-names: must contain "bam_clk" entry
|
||||
- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
|
||||
the secure world.
|
||||
- qcom,controlled-remotely : optional, indicates that the bam is controlled by
|
||||
remote proccessor i.e. execution environment.
|
||||
- qcom,powered-remotely : optional, indicates that the bam is powered up by
|
||||
a remote processor but must be initialized by the local processor.
|
||||
- num-channels : optional, indicates supported number of DMA channels in a
|
||||
remotely controlled bam.
|
||||
- qcom,num-ees : optional, indicates supported number of Execution Environments
|
||||
in a remotely controlled bam.
|
||||
|
||||
Example:
|
||||
|
||||
uart-bam: dma@f9984000 = {
|
||||
compatible = "qcom,bam-v1.4.0";
|
||||
reg = <0xf9984000 0x15000>;
|
||||
interrupts = <0 94 0>;
|
||||
clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
DMA clients must use the format described in the dma.txt file, using a two cell
|
||||
specifier for each channel.
|
||||
|
||||
Example:
|
||||
serial@f991e000 {
|
||||
compatible = "qcom,msm-uart";
|
||||
reg = <0xf991e000 0x1000>
|
||||
<0xf9944000 0x19000>;
|
||||
interrupts = <0 108 0>;
|
||||
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
|
||||
dmas = <&uart-bam 0>, <&uart-bam 1>;
|
||||
dma-names = "rx", "tx";
|
||||
};
|
||||
|
|
@ -44,8 +44,6 @@ properties:
|
|||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency: true
|
||||
|
||||
pagesize:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
|
||||
|
|
@ -105,6 +103,7 @@ required:
|
|||
- spi-max-frequency
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
|
|
@ -117,7 +116,7 @@ allOf:
|
|||
- size
|
||||
- address-width
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
|
||||
$id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
|
||||
|
|
@ -28,9 +28,6 @@ properties:
|
|||
description: chip select of EEPROM
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency: true
|
||||
spi-cs-high: true
|
||||
|
||||
read-only:
|
||||
description:
|
||||
parameter-less property which disables writes to the EEPROM
|
||||
|
|
@ -42,14 +39,16 @@ properties:
|
|||
of EEPROM (e.g. for SPI bus multiplexing)
|
||||
maxItems: 1
|
||||
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- data-size
|
||||
- spi-max-frequency
|
||||
|
||||
additionalProperties: false
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
@ -330,7 +330,7 @@ succeeded.
|
|||
|
||||
The Device Tree Overlay will contain:
|
||||
* "target-path" or "target"
|
||||
The insertion point where the the contents of the overlay will go into the
|
||||
The insertion point where the contents of the overlay will go into the
|
||||
live tree. target-path is a full path, while target is a phandle.
|
||||
* "ranges"
|
||||
The address space mapping from processor to FPGA bus(ses).
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ Optional properties:
|
|||
- ngpios : Number of used GPIO lines (0..n-1), default is 8.
|
||||
- load-gpios : GPIO pin specifier attached to load enable, this
|
||||
pin is pulsed before reading from the device to
|
||||
load input pin values into the the device.
|
||||
load input pin values into the device.
|
||||
|
||||
For other required and optional properties of SPI slave
|
||||
nodes please refer to ../spi/spi-bus.txt.
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/soc/samsung/exynos-chipid.yaml#
|
||||
$id: http://devicetree.org/schemas/hwinfo/samsung,exynos-chipid.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung Exynos SoC series Chipid driver
|
||||
|
|
@ -0,0 +1,30 @@
|
|||
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/hwinfo/samsung,s5pv210-chipid.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung S5PV210 SoC ChipID
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzk@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: samsung,s5pv210-chipid
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
chipid@e0000000 {
|
||||
compatible = "samsung,s5pv210-chipid";
|
||||
reg = <0xe0000000 0x1000>;
|
||||
};
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml#
|
||||
$id: http://devicetree.org/schemas/hwinfo/ti,k3-socinfo.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Texas Instruments K3 Multicore SoC platforms chipid module
|
||||
|
|
@ -57,7 +57,7 @@ patternProperties:
|
|||
Configures bypassing the individual voltage input attenuator. If
|
||||
set to 1 the attenuator is bypassed if set to 0 the attenuator is
|
||||
not bypassed. If the property is absent then the attenuator
|
||||
retains it's configuration from the bios/bootloader.
|
||||
retains its configuration from the bios/bootloader.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1]
|
||||
|
||||
|
|
|
|||
|
|
@ -1,33 +0,0 @@
|
|||
* Energymicro efm32 i2c controller
|
||||
|
||||
Required properties :
|
||||
|
||||
- reg : Offset and length of the register set for the device
|
||||
- compatible : should be "energymicro,efm32-i2c"
|
||||
- interrupts : the interrupt number
|
||||
- clocks : reference to the module clock
|
||||
|
||||
Recommended properties :
|
||||
|
||||
- clock-frequency : maximal I2C bus clock frequency in Hz.
|
||||
- energymicro,location : Decides the location of the USART I/O pins.
|
||||
Allowed range : [0 .. 6]
|
||||
|
||||
Example:
|
||||
i2c0: i2c@4000a000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "energymicro,efm32-i2c";
|
||||
reg = <0x4000a000 0x400>;
|
||||
interrupts = <9>;
|
||||
clocks = <&cmu clk_HFPERCLKI2C0>;
|
||||
clock-frequency = <100000>;
|
||||
energymicro,location = <3>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "microchip,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -22,6 +22,8 @@ properties:
|
|||
- adi,ad5767
|
||||
|
||||
output-range-microvolts:
|
||||
$ref: /schemas/types.yaml#/definitions/int32-array
|
||||
maxItems: 2
|
||||
description: Select converter output range.
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ Required properties:
|
|||
- interrupts : interrupt specification for the ektf2127 interrupt
|
||||
- power-gpios : GPIO specification for the pin connected to the
|
||||
ektf2127's wake input. This needs to be driven high
|
||||
to take ektf2127 out of it's low power state
|
||||
to take ektf2127 out of its low power state
|
||||
|
||||
For additional optional properties see: touchscreen.txt
|
||||
|
||||
|
|
|
|||
|
|
@ -1,61 +0,0 @@
|
|||
RDA Micro RDA8810PL Interrupt Controller
|
||||
|
||||
The interrupt controller in RDA8810PL SoC is a custom interrupt controller
|
||||
which supports up to 32 interrupts.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should be "rda,8810pl-intc".
|
||||
- reg: Specifies base physical address of the registers set.
|
||||
- interrupt-controller: Identifies the node as an interrupt controller.
|
||||
- #interrupt-cells: Specifies the number of cells needed to encode an
|
||||
interrupt source. The value shall be 2.
|
||||
|
||||
The interrupt sources are as follows:
|
||||
|
||||
ID Name
|
||||
------------
|
||||
0: PULSE_DUMMY
|
||||
1: I2C
|
||||
2: NAND_NFSC
|
||||
3: SDMMC1
|
||||
4: SDMMC2
|
||||
5: SDMMC3
|
||||
6: SPI1
|
||||
7: SPI2
|
||||
8: SPI3
|
||||
9: UART1
|
||||
10: UART2
|
||||
11: UART3
|
||||
12: GPIO1
|
||||
13: GPIO2
|
||||
14: GPIO3
|
||||
15: KEYPAD
|
||||
16: TIMER
|
||||
17: TIMEROS
|
||||
18: COMREG0
|
||||
19: COMREG1
|
||||
20: USB
|
||||
21: DMC
|
||||
22: DMA
|
||||
23: CAMERA
|
||||
24: GOUDA
|
||||
25: GPU
|
||||
26: VPU_JPG
|
||||
27: VPU_HOST
|
||||
28: VOC
|
||||
29: AUIFC0
|
||||
30: AUIFC1
|
||||
31: L2CC
|
||||
|
||||
Example:
|
||||
apb@20800000 {
|
||||
compatible = "simple-bus";
|
||||
...
|
||||
intc: interrupt-controller@0 {
|
||||
compatible = "rda,8810pl-intc";
|
||||
reg = <0x0 0x1000>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: RDA Micro RDA8810PL interrupt controller
|
||||
|
||||
maintainers:
|
||||
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/interrupt-controller.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: rda,8810pl-intc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 2
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
intc: interrupt-controller@0 {
|
||||
compatible = "rda,8810pl-intc";
|
||||
reg = <0x0 0x1000>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
...
|
||||
193
Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
Normal file
193
Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
Normal file
|
|
@ -0,0 +1,193 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ISSI LED controllers bindings for IS31FL319{0,1,3,6,9}
|
||||
|
||||
maintainers:
|
||||
- Vincent Knecht <vincent.knecht@mailoo.org>
|
||||
|
||||
description: |
|
||||
The IS31FL319X are LED controllers with I2C interface.
|
||||
Previously known as Si-En SN319{0,1,3,6,9}.
|
||||
|
||||
For more product information please see the links below:
|
||||
https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
|
||||
https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
|
||||
https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
|
||||
https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
|
||||
https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- issi,is31fl3190
|
||||
- issi,is31fl3191
|
||||
- issi,is31fl3193
|
||||
- issi,is31fl3196
|
||||
- issi,is31fl3199
|
||||
- si-en,sn3190
|
||||
- si-en,sn3191
|
||||
- si-en,sn3193
|
||||
- si-en,sn3196
|
||||
- si-en,sn3199
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
shutdown-gpios:
|
||||
maxItems: 1
|
||||
description: GPIO attached to the SDB pin.
|
||||
|
||||
audio-gain-db:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 0
|
||||
description: Audio gain selection for external analog modulation input.
|
||||
enum: [0, 3, 6, 9, 12, 15, 18, 21]
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
patternProperties:
|
||||
"^led@[1-9]$":
|
||||
type: object
|
||||
$ref: common.yaml#
|
||||
|
||||
properties:
|
||||
reg:
|
||||
description: Index of the LED.
|
||||
minimum: 1
|
||||
maximum: 9
|
||||
|
||||
led-max-microamp:
|
||||
description:
|
||||
Note that a driver will take the lowest of all LED limits
|
||||
since the chip has a single global setting. The lowest value
|
||||
will be chosen due to the PWM specificity, where lower
|
||||
brightness is achieved by reducing the duty-cycle of pulses
|
||||
and not the current, which will always have its peak value
|
||||
equal to led-max-microamp.
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- issi,is31fl3190
|
||||
- issi,is31fl3191
|
||||
- issi,is31fl3193
|
||||
- si-en,sn3190
|
||||
- si-en,sn3191
|
||||
- si-en,sn3193
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
enum: [0x68, 0x69, 0x6a, 0x6b]
|
||||
|
||||
audio-gain-db: false
|
||||
|
||||
patternProperties:
|
||||
"^led@[1-9]$":
|
||||
properties:
|
||||
led-max-microamp:
|
||||
default: 42000
|
||||
enum: [5000, 10000, 17500, 30000, 42000]
|
||||
else:
|
||||
properties:
|
||||
reg:
|
||||
enum: [0x64, 0x65, 0x66, 0x67]
|
||||
|
||||
patternProperties:
|
||||
"^led@[1-9]$":
|
||||
properties:
|
||||
led-max-microamp:
|
||||
default: 20000
|
||||
enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- issi,is31fl3190
|
||||
- issi,is31fl3191
|
||||
- si-en,sn3190
|
||||
- si-en,sn3191
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[1-9]$":
|
||||
properties:
|
||||
reg:
|
||||
maximum: 1
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- issi,is31fl3193
|
||||
- si-en,sn3193
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[1-9]$":
|
||||
properties:
|
||||
reg:
|
||||
maximum: 3
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- issi,is31fl3196
|
||||
- si-en,sn3196
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[1-9]$":
|
||||
properties:
|
||||
reg:
|
||||
maximum: 6
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led-controller@65 {
|
||||
compatible = "issi,is31fl3196";
|
||||
reg = <0x65>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
label = "red:aux";
|
||||
led-max-microamp = <10000>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
reg = <5>;
|
||||
label = "green:power";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
|
||||
|
||||
The device is controlled through two pins: FL_EN and EN_SET. The pins when,
|
||||
asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
|
||||
respectively. In order to add a capability of selecting the strobe signal source
|
||||
(e.g. CPU or camera sensor) there is an additional switch required, independent
|
||||
of the flash chip. The switch is controlled with pin control.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : Must be "skyworks,aat1290".
|
||||
- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
|
||||
- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
|
||||
|
||||
Optional properties:
|
||||
- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
|
||||
"default" and "host" must refer to the same pin configuration
|
||||
node, which sets the host as a strobe signal provider. Entry
|
||||
"isp" must refer to the pin configuration node, which sets the
|
||||
ISP as a strobe signal provider.
|
||||
|
||||
A discrete LED element connected to the device must be represented by a child
|
||||
node - see Documentation/devicetree/bindings/leds/common.txt.
|
||||
|
||||
Required properties of the LED child node:
|
||||
- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
|
||||
- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
|
||||
Maximum flash LED supply current can be calculated using
|
||||
following formula: I = 1A * 162kohm / Rset.
|
||||
- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
|
||||
Maximum flash timeout can be calculated using following
|
||||
formula: T = 8.82 * 10^9 * Ct.
|
||||
|
||||
Optional properties of the LED child node:
|
||||
- function : see Documentation/devicetree/bindings/leds/common.txt
|
||||
- color : see Documentation/devicetree/bindings/leds/common.txt
|
||||
- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
|
||||
|
||||
Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
|
||||
a switch that allows for routing strobe signal either from the host or from
|
||||
the camera sensor):
|
||||
|
||||
#include "exynos4412.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
led-controller {
|
||||
compatible = "skyworks,aat1290";
|
||||
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
|
||||
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default", "host", "isp";
|
||||
pinctrl-0 = <&camera_flash_host>;
|
||||
pinctrl-1 = <&camera_flash_host>;
|
||||
pinctrl-2 = <&camera_flash_isp>;
|
||||
|
||||
camera_flash: led {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-max-microamp = <520833>;
|
||||
flash-max-microamp = <1012500>;
|
||||
flash-max-timeout-us = <1940000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_0 {
|
||||
camera_flash_host: camera-flash-host {
|
||||
samsung,pins = "gpj1-0";
|
||||
samsung,pin-function = <1>;
|
||||
samsung,pin-val = <0>;
|
||||
};
|
||||
|
||||
camera_flash_isp: camera-flash-isp {
|
||||
samsung,pins = "gpj1-0";
|
||||
samsung,pin-function = <1>;
|
||||
samsung,pin-val = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,61 +0,0 @@
|
|||
LEDs connected to is31fl319x LED controller chip
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be any of
|
||||
"issi,is31fl3190"
|
||||
"issi,is31fl3191"
|
||||
"issi,is31fl3193"
|
||||
"issi,is31fl3196"
|
||||
"issi,is31fl3199"
|
||||
"si-en,sn3199".
|
||||
- #address-cells: Must be 1.
|
||||
- #size-cells: Must be 0.
|
||||
- reg: 0x64, 0x65, 0x66, or 0x67.
|
||||
|
||||
Optional properties:
|
||||
- audio-gain-db : audio gain selection for external analog modulation input.
|
||||
Valid values: 0 - 21, step by 3 (rounded down)
|
||||
Default: 0
|
||||
- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
|
||||
|
||||
Each led is represented as a sub-node of the issi,is31fl319x device.
|
||||
There can be less leds subnodes than the chip can support but not more.
|
||||
|
||||
Required led sub-node properties:
|
||||
- reg : number of LED line
|
||||
Valid values: 1 - number of leds supported by the chip variant.
|
||||
|
||||
Optional led sub-node properties:
|
||||
- label : see Documentation/devicetree/bindings/leds/common.txt.
|
||||
- linux,default-trigger :
|
||||
see Documentation/devicetree/bindings/leds/common.txt.
|
||||
- led-max-microamp : (optional)
|
||||
Valid values: 5000 - 40000, step by 5000 (rounded down)
|
||||
Default: 20000 (20 mA)
|
||||
Note: a driver will take the lowest of all led limits since the
|
||||
chip has a single global setting. The lowest value will be chosen
|
||||
due to the PWM specificity, where lower brightness is achieved
|
||||
by reducing the dury-cycle of pulses and not the current, which
|
||||
will always have its peak value equal to led-max-microamp.
|
||||
|
||||
Examples:
|
||||
|
||||
fancy_leds: leds@65 {
|
||||
compatible = "issi,is31fl3196";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x65>;
|
||||
shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
red_aux: led@1 {
|
||||
label = "red:aux";
|
||||
reg = <1>;
|
||||
led-max-microamp = <10000>;
|
||||
};
|
||||
|
||||
green_power: led@5 {
|
||||
label = "green:power";
|
||||
reg = <5>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
|
@ -78,60 +78,66 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led-controller@14 {
|
||||
compatible = "ti,lp5009";
|
||||
reg = <0x14>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
enable-gpios = <&gpio1 16>;
|
||||
|
||||
multi-led@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
|
||||
multi-led@2 {
|
||||
led-controller@14 {
|
||||
compatible = "ti,lp5009";
|
||||
reg = <0x14>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
reg = <0x2 0x3 0x5>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STANDBY;
|
||||
#size-cells = <0>;
|
||||
enable-gpios = <&gpio1 16>;
|
||||
|
||||
led-6 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
multi-led@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
|
||||
led@0 {
|
||||
reg = <0x0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <0x1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <0x2>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
|
||||
led-7 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
multi-led@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x3>, <0x4>, <0x5>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STANDBY;
|
||||
|
||||
led-8 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
led@3 {
|
||||
reg = <0x3>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
reg = <0x4>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
reg = <0x5>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
|
|||
|
|
@ -108,119 +108,119 @@ additionalProperties: false
|
|||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led-controller@32 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,lp8501";
|
||||
reg = <0x32>;
|
||||
clock-mode = /bits/ 8 <2>;
|
||||
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
|
||||
led-controller@32 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,lp8501";
|
||||
reg = <0x32>;
|
||||
clock-mode = /bits/ 8 <2>;
|
||||
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
chan-name = "d1";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
chan-name = "d1";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
chan-name = "d2";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
chan-name = "d2";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
chan-name = "d3";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
chan-name = "d3";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
reg = <3>;
|
||||
chan-name = "d4";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@3 {
|
||||
reg = <3>;
|
||||
chan-name = "d4";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
reg = <4>;
|
||||
chan-name = "d5";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@4 {
|
||||
reg = <4>;
|
||||
chan-name = "d5";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
reg = <5>;
|
||||
chan-name = "d6";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@5 {
|
||||
reg = <5>;
|
||||
chan-name = "d6";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@6 {
|
||||
reg = <6>;
|
||||
chan-name = "d7";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@6 {
|
||||
reg = <6>;
|
||||
chan-name = "d7";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@7 {
|
||||
reg = <7>;
|
||||
chan-name = "d8";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@7 {
|
||||
reg = <7>;
|
||||
chan-name = "d8";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
|
||||
led@8 {
|
||||
reg = <8>;
|
||||
chan-name = "d9";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
led@8 {
|
||||
reg = <8>;
|
||||
chan-name = "d9";
|
||||
led-cur = /bits/ 8 <0x14>;
|
||||
max-cur = /bits/ 8 <0x20>;
|
||||
};
|
||||
};
|
||||
|
||||
led-controller@33 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "national,lp5523";
|
||||
reg = <0x33>;
|
||||
clock-mode = /bits/ 8 <0>;
|
||||
led-controller@33 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "national,lp5523";
|
||||
reg = <0x33>;
|
||||
clock-mode = /bits/ 8 <0>;
|
||||
|
||||
multi-led@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x2>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STANDBY;
|
||||
linux,default-trigger = "heartbeat";
|
||||
multi-led@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x2>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STANDBY;
|
||||
linux,default-trigger = "heartbeat";
|
||||
|
||||
led@0 {
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
reg = <0x0>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
led@0 {
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
reg = <0x0>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
reg = <0x1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
led@1 {
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
reg = <0x1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led@6 {
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
reg = <0x6>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
led@6 {
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
reg = <0x6>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -55,24 +55,24 @@ examples:
|
|||
compatible = "pwm-leds-multicolor";
|
||||
|
||||
multi-led {
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
max-brightness = <65535>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
max-brightness = <65535>;
|
||||
|
||||
led-red {
|
||||
pwms = <&pwm1 0 1000000>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
led-red {
|
||||
pwms = <&pwm1 0 1000000>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led-green {
|
||||
pwms = <&pwm2 0 1000000>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
led-green {
|
||||
pwms = <&pwm2 0 1000000>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led-blue {
|
||||
pwms = <&pwm3 0 1000000>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
led-blue {
|
||||
pwms = <&pwm3 0 1000000>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@ description: >
|
|||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,pm660l-lpg
|
||||
- qcom,pm8150b-lpg
|
||||
- qcom,pm8150l-lpg
|
||||
- qcom,pm8350c-pwm
|
||||
|
|
|
|||
95
Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
Normal file
95
Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
Normal file
|
|
@ -0,0 +1,95 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
|
||||
|
||||
maintainers:
|
||||
- Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
||||
- Krzysztof Kozlowski <krzk@kernel.org>
|
||||
|
||||
description: |
|
||||
The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
|
||||
asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
|
||||
respectively. In order to add a capability of selecting the strobe signal
|
||||
source (e.g. CPU or camera sensor) there is an additional switch required,
|
||||
independent of the flash chip. The switch is controlled with pin control.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: skyworks,aat1290
|
||||
|
||||
enset-gpios:
|
||||
maxItems: 1
|
||||
description: EN_SET pin
|
||||
|
||||
flen-gpios:
|
||||
maxItems: 1
|
||||
description: FL_EN pin
|
||||
|
||||
led:
|
||||
$ref: common.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
led-max-microamp: true
|
||||
|
||||
flash-max-microamp:
|
||||
description: |
|
||||
Maximum flash LED supply current can be calculated using following
|
||||
formula:: I = 1A * 162 kOhm / Rset.
|
||||
|
||||
flash-max-timeout-us:
|
||||
description: |
|
||||
Maximum flash timeout can be calculated using following formula::
|
||||
T = 8.82 * 10^9 * Ct.
|
||||
|
||||
required:
|
||||
- flash-max-microamp
|
||||
- flash-max-timeout-us
|
||||
- led-max-microamp
|
||||
|
||||
pinctrl-names:
|
||||
items:
|
||||
- const: default
|
||||
- const: host
|
||||
- const: isp
|
||||
|
||||
pinctrl-0: true
|
||||
pinctrl-1: true
|
||||
pinctrl-2: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- enset-gpios
|
||||
- flen-gpios
|
||||
- led
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
// Ct = 220 nF, Rset = 160 kOhm
|
||||
led-controller {
|
||||
compatible = "skyworks,aat1290";
|
||||
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
|
||||
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default", "host", "isp";
|
||||
pinctrl-0 = <&camera_flash_host>;
|
||||
pinctrl-1 = <&camera_flash_host>;
|
||||
pinctrl-2 = <&camera_flash_isp>;
|
||||
|
||||
led {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-max-microamp = <520833>;
|
||||
flash-max-microamp = <1012500>;
|
||||
flash-max-timeout-us = <1940000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
Device-Tree bindings for GPIO IR receiver
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "gpio-ir-receiver".
|
||||
- gpios: specifies GPIO used for IR signal reception.
|
||||
|
||||
Optional properties:
|
||||
- linux,rc-map-name: see rc.txt file in the same
|
||||
directory.
|
||||
- linux,autosuspend-period: autosuspend delay time,
|
||||
the unit is milisecond.
|
||||
|
||||
Example node:
|
||||
|
||||
ir: ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio0 19 1>;
|
||||
linux,rc-map-name = "rc-rc6-mce";
|
||||
linux,autosuspend-period = <125>;
|
||||
};
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: GPIO Based IR receiver
|
||||
|
||||
maintainers:
|
||||
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
||||
|
||||
allOf:
|
||||
- $ref: rc.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: gpio-ir-receiver
|
||||
|
||||
gpios:
|
||||
maxItems: 1
|
||||
|
||||
linux,autosuspend-period:
|
||||
description: autosuspend delay time in milliseconds
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- gpios
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio0 19 1>;
|
||||
linux,rc-map-name = "rc-rc6-mce";
|
||||
linux,autosuspend-period = <125>;
|
||||
};
|
||||
...
|
||||
|
|
@ -12,7 +12,7 @@ maintainers:
|
|||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "^ir(@[a-f0-9]+)?$"
|
||||
pattern: "^ir(-receiver)?(@[a-f0-9]+)?$"
|
||||
|
||||
linux,rc-map-name:
|
||||
description:
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@ properties:
|
|||
rohm,enable-hidden-gpo:
|
||||
description: |
|
||||
The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
|
||||
data-sheet as it's location in the middle of GND pins makes it hard to
|
||||
data-sheet as its location in the middle of GND pins makes it hard to
|
||||
use on PCB. If your board has managed to use this pin you can enable the
|
||||
second GPO by defining this property. Dont enable this if you are unsure
|
||||
about how the E5 pin is connected on your board.
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ Lantiq XWAY SoC RCU binding
|
|||
===========================
|
||||
|
||||
This binding describes the RCU (reset controller unit) multifunction device,
|
||||
where each sub-device has it's own set of registers.
|
||||
where each sub-device has its own set of registers.
|
||||
|
||||
The RCU register range is used for multiple purposes. Mostly one device
|
||||
uses one or multiple register exclusively, but for some registers some
|
||||
|
|
|
|||
|
|
@ -22,13 +22,14 @@ properties:
|
|||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
|
|||
|
|
@ -1,17 +0,0 @@
|
|||
ARM AFS - ARM Firmware Suite Partitions
|
||||
=======================================
|
||||
|
||||
The ARM Firmware Suite is a flash partitioning system found on the
|
||||
ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
|
||||
Versatile PB, the RealView family, Versatile Express and Juno.
|
||||
|
||||
Required properties:
|
||||
- compatible : (required) must be "arm,arm-firmware-suite"
|
||||
|
||||
Example:
|
||||
|
||||
flash@0 {
|
||||
partitions {
|
||||
compatible = "arm,arm-firmware-suite";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mtd/partitions/arm,arm-firmware-suite.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ARM Firmware Suite (AFS) Partitions
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
|
||||
description: |
|
||||
The ARM Firmware Suite is a flash partitioning system found on the
|
||||
ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
|
||||
Versatile PB, the RealView family, Versatile Express and Juno.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: arm,arm-firmware-suite
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
partitions {
|
||||
compatible = "arm,arm-firmware-suite";
|
||||
};
|
||||
...
|
||||
|
|
@ -15,7 +15,7 @@ Required properties:
|
|||
"rx_desc": MSGDMA Rx dispatcher descriptor space region
|
||||
"rx_resp": MSGDMA Rx dispatcher response space region
|
||||
"s1": SGDMA descriptor memory
|
||||
- interrupts: Should contain the TSE interrupts and it's mode.
|
||||
- interrupts: Should contain the TSE interrupts and its mode.
|
||||
- interrupt-names: Should contain the interrupt names
|
||||
"rx_irq": xDMA Rx dispatcher interrupt
|
||||
"tx_irq": xDMA Tx dispatcher interrupt
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ Required properties:
|
|||
- active_slave : Specifies the slave to use for time stamping,
|
||||
ethtool and SIOCGMIIPHY
|
||||
- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
|
||||
device. See also cpsw-phy-sel.txt for it's binding.
|
||||
device. See also cpsw-phy-sel.txt for its binding.
|
||||
Note that in legacy cases cpsw-phy-sel may be
|
||||
a child device instead of a phandle
|
||||
(DEPRECATED, use phys property instead).
|
||||
|
|
|
|||
|
|
@ -1,52 +0,0 @@
|
|||
* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "rockchip,<name>-emac"
|
||||
"rockchip,rk3036-emac": found on RK3036 SoCs
|
||||
"rockchip,rk3066-emac": found on RK3066 SoCs
|
||||
"rockchip,rk3188-emac": found on RK3188 SoCs
|
||||
- reg: Address and length of the register set for the device
|
||||
- interrupts: Should contain the EMAC interrupts
|
||||
- rockchip,grf: phandle to the syscon grf used to control speed and mode
|
||||
for emac.
|
||||
- phy: see ethernet.txt file in the same directory.
|
||||
- phy-mode: see ethernet.txt file in the same directory.
|
||||
|
||||
Optional properties:
|
||||
- phy-supply: phandle to a regulator if the PHY needs one
|
||||
|
||||
Clock handling:
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
- clock-names: Shall be "hclk" for the host clock needed to calculate and set
|
||||
polling period of EMAC and "macref" for the reference clock needed to transfer
|
||||
data to and from the phy.
|
||||
|
||||
Child nodes of the driver are the individual PHY devices connected to the
|
||||
MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
|
||||
|
||||
Examples:
|
||||
|
||||
ethernet@10204000 {
|
||||
compatible = "rockchip,rk3188-emac";
|
||||
reg = <0xc0fc2000 0x3c>;
|
||||
interrupts = <6>;
|
||||
mac-address = [ 00 11 22 33 44 55 ];
|
||||
|
||||
clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
|
||||
clock-names = "hclk", "macref";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
|
||||
|
||||
rockchip,grf = <&grf>;
|
||||
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rmii";
|
||||
phy-supply = <&vcc_rmii>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: NXP Semiconductors NCI NFC controller
|
||||
|
||||
maintainers:
|
||||
- Charles Gorand <charles.gorand@effinnov.com>
|
||||
- Krzysztof Kozlowski <krzk@kernel.org>
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ MAC node:
|
|||
- mac-address : The 6-byte MAC address. If present, it is the default
|
||||
MAC address.
|
||||
- internal-phy : phandle to the internal PHY node
|
||||
- phy-handle : phandle the the external PHY node
|
||||
- phy-handle : phandle the external PHY node
|
||||
|
||||
Internal PHY node:
|
||||
- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
|
||||
|
|
|
|||
115
Documentation/devicetree/bindings/net/rockchip,emac.yaml
Normal file
115
Documentation/devicetree/bindings/net/rockchip,emac.yaml
Normal file
|
|
@ -0,0 +1,115 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/net/rockchip,emac.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
|
||||
|
||||
maintainers:
|
||||
- Heiko Stuebner <heiko@sntech.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- rockchip,rk3036-emac
|
||||
- rockchip,rk3066-emac
|
||||
- rockchip,rk3188-emac
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
minItems: 2
|
||||
items:
|
||||
- description: host clock
|
||||
- description: reference clock
|
||||
- description: mac TX/RX clock
|
||||
|
||||
clock-names:
|
||||
minItems: 2
|
||||
items:
|
||||
- const: hclk
|
||||
- const: macref
|
||||
- const: macclk
|
||||
|
||||
rockchip,grf:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description:
|
||||
Phandle to the syscon GRF used to control speed and mode for the EMAC.
|
||||
|
||||
phy-supply:
|
||||
description:
|
||||
Phandle to a regulator if the PHY needs one.
|
||||
|
||||
mdio:
|
||||
$ref: mdio.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- clock-names
|
||||
- rockchip,grf
|
||||
- phy
|
||||
- phy-mode
|
||||
- mdio
|
||||
|
||||
allOf:
|
||||
- $ref: "ethernet-controller.yaml#"
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: rockchip,rk3036-emac
|
||||
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
minItems: 3
|
||||
|
||||
clock-names:
|
||||
minItems: 3
|
||||
|
||||
else:
|
||||
properties:
|
||||
clocks:
|
||||
maxItems: 2
|
||||
|
||||
clock-names:
|
||||
maxItems: 2
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/rk3188-cru-common.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
ethernet@10204000 {
|
||||
compatible = "rockchip,rk3188-emac";
|
||||
reg = <0xc0fc2000 0x3c>;
|
||||
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
|
||||
clock-names = "hclk", "macref";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rmii";
|
||||
phy-supply = <&vcc_rmii>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -144,6 +144,7 @@ properties:
|
|||
description: If present then the reset sequence using the GPIO
|
||||
specified in the "reset-gpio" property is reversed (H=reset state,
|
||||
L=operation state) (optional required).
|
||||
type: boolean
|
||||
|
||||
vpcie-supply:
|
||||
description: Should specify the regulator in charge of PCIe port power.
|
||||
|
|
|
|||
|
|
@ -106,6 +106,9 @@ properties:
|
|||
maxItems: 3
|
||||
|
||||
dma-coherent: true
|
||||
iommu-map: true
|
||||
iommu-map-mask: true
|
||||
msi-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
40
Documentation/devicetree/bindings/perf/arm,ccn.yaml
Normal file
40
Documentation/devicetree/bindings/perf/arm,ccn.yaml
Normal file
|
|
@ -0,0 +1,40 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/perf/arm,ccn.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ARM CCN (Cache Coherent Network) Performance Monitors
|
||||
|
||||
maintainers:
|
||||
- Robin Murphy <robin.murphy@arm.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- arm,ccn-502
|
||||
- arm,ccn-504
|
||||
- arm,ccn-508
|
||||
- arm,ccn-512
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
ccn@20000000 {
|
||||
compatible = "arm,ccn-504";
|
||||
reg = <0x20000000 0x1000000>;
|
||||
interrupts = <0 181 4>;
|
||||
};
|
||||
...
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
* ARM CCN (Cache Coherent Network)
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: (standard compatible string) should be one of:
|
||||
"arm,ccn-502"
|
||||
"arm,ccn-504"
|
||||
"arm,ccn-508"
|
||||
"arm,ccn-512"
|
||||
|
||||
- reg: (standard registers property) physical address and size
|
||||
(16MB) of the configuration registers block
|
||||
|
||||
- interrupts: (standard interrupt property) single interrupt
|
||||
generated by the control block
|
||||
|
||||
Example:
|
||||
|
||||
ccn@2000000000 {
|
||||
compatible = "arm,ccn-504";
|
||||
reg = <0x20 0x00000000 0 0x1000000>;
|
||||
interrupts = <0 181 4>;
|
||||
};
|
||||
|
|
@ -16,7 +16,7 @@ description: |+
|
|||
- compatible: Should be the following:
|
||||
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Refer to the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.yaml
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ description: |+
|
|||
- compatible: Should be one of the following:
|
||||
"aspeed,ast2400-scu", "syscon", "simple-mfd"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Refer to the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.yaml
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ description: |+
|
|||
"aspeed,ast2500-scu", "syscon", "simple-mfd"
|
||||
"aspeed,g5-scu", "syscon", "simple-mfd"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Refer to the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.yaml
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ description: |+
|
|||
- compatible: Should be one of the following:
|
||||
"aspeed,ast2600-scu", "syscon", "simple-mfd"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Refer to the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.yaml
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright 2019 BayLibre, SAS
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Amlogic Meson Everything-Else Power Domains
|
||||
|
||||
|
|
@ -17,7 +17,7 @@ description: |+
|
|||
- compatible: Should be the following:
|
||||
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Refer to the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.yaml
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -3,8 +3,8 @@
|
|||
# Author: Jianxin Pan <jianxin.pan@amlogic.com>
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Amlogic Meson Secure Power Domains
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ maintainers:
|
|||
- Hector Martin <marcan@marcan.st>
|
||||
|
||||
allOf:
|
||||
- $ref: "power-domain.yaml#"
|
||||
- $ref: power-domain.yaml#
|
||||
|
||||
description: |
|
||||
Apple SoCs include PMGR blocks responsible for power management,
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: BCM63xx power domain driver
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/renesas,apmu.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/renesas,apmu.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Renesas Advanced Power Management Unit
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Renesas R-Car and RZ/G System Controller
|
||||
|
||||
|
|
|
|||
|
|
@ -30,11 +30,15 @@ properties:
|
|||
|
||||
pwrkey:
|
||||
type: object
|
||||
$ref: "../../input/qcom,pm8941-pwrkey.yaml#"
|
||||
$ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
|
||||
|
||||
resin:
|
||||
type: object
|
||||
$ref: "../../input/qcom,pm8941-pwrkey.yaml#"
|
||||
$ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
|
||||
|
||||
watchdog:
|
||||
type: object
|
||||
$ref: /schemas/watchdog/qcom,pm8916-wdt.yaml
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ description: |
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
const: "regulator-poweroff"
|
||||
const: regulator-poweroff
|
||||
|
||||
cpu-supply:
|
||||
description:
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ description: |
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
const: "xlnx,zynqmp-power"
|
||||
const: xlnx,zynqmp-power
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Active-semi ACT8945A Charger Function
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq2415x.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for TI bq2415x Li-Ion Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq24190.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for TI BQ2419x Li-Ion Battery Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq24257.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq24735.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for TI BQ24735 Li-Ion Battery Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2020 Texas Instruments Incorporated
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI bq2515x 500-mA Linear charger family
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2020 Texas Instruments Incorporated
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI bq256xx Switch Mode Buck Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq25890.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2020 Texas Instruments Incorporated
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI BQ25980 Flash Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2020 Texas Instruments Incorporated
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/bq27xxx.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: TI BQ27XXX fuel gauge family
|
||||
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@ properties:
|
|||
|
||||
cm-battery-stat:
|
||||
description: battery status
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum:
|
||||
- 0 # battery always present
|
||||
- 1 # no battery
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Motorola CPCAP PMIC battery
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Motorola CPCAP PMIC charger
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Dialog Semiconductor DA9150 Charger Power Supply bindings
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright 2019-2020 Artur Rojek
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Ingenic JZ47xx battery bindings
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2021 Sebastian Reichel
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/isp1704.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for NXP ISP1704 USB Charger Detection
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: LEGO MINDSTORMS EV3 Battery
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices LT3651 Charger Power Supply bindings
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Copyright (C) 2020 Topic Embedded Products
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Linear Technology (Analog Devices) LTC4162-L Charger
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Maxim DS2760 DT bindings
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Maxim MAX14656 DT bindings
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Maxim 17040 fuel gauge series
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user