forked from Minki/linux
Add minimal device tree support for dra62x also known j5eco. It is
related to dm814x, just the clocks are a bit different and it has a different set of integrated devices. And let's get some basic dm814x and dra62x devices working as many of the devices are like on am33xx:: - pinctrl using the pinctrl defines as for am33xx - Updated EDMA bindings with support for using exma_xbar - MMC support for dm814x-evm, t410 and dra62x-j5eco-evm - USB support for dm814x-evm, t410 and dra62x-j5eco-evm This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed branch that has dm814x dts fixes interlaced with SoC related fixes to keep things booting. The interlaced SoC and dts fixes were needed because of issues with the device tree defined clocks that just happened to work on bootloader timings for t410 earlier. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWeewGAAoJEBvUPslcq6Vz+5UQAJDZH9+kELrI1i1ymWg50q2+ HdnswijaQVuX1ZZeyarytvMT00s6bkouaGTLYrPGlifuJuBAAZ3PewZ4FVgIkA4A V4QAl3+vZ0wU+TjwWLlODXwd20xAeGY5LmhLkaHheP8Dbnd1OLm2BxJlps+zK3WJ a9Wv0rcwJuJt9dBGdELDcj04SlHd6oOmy+bHeoUi0VBcb+ZJD8+WaWQB1qkvae46 IitA74nDLY0Ejezf3lJ8Bu+I1NKv5tGg//SEJTZQfaSFxGoYbfcHkOKrBP8MAM8U IQZHxz0izeKaAyra7qrqiHox4GVJpKFVkvHrDlox9GDSUKxP0cRpahLEqjUF1VMm FYE2dh/JjWFhPaGMVIQIiVQNND6NZlycBc1fcEKuT+2tXjqALQ1qDZwb6S44q5/r 1QL+pBIZVMl5YaTpt/yh7COhpMtKbofamzJkzUTVwx6ao/a1uK2G+K83ZB9wkPkw YUBL68oD8EN+fSnZMVlFQkwJGgmoMzaFuqLJMjV0RQWTmzHH43Nyg76muMCIiKwf Xu4ZdNUS7VkHYdjVJXQcXU4igLejj6Q/Qmvw1M+LxsyDH+I4WRgWgYB11T45f0Lf eafwSkAayq7dBzuXJ4kOuK5sR9LOYA7Le9XRvu9f8KOY2aKWoZiVB2KPCz7BaoNs BZH5tf0C7D5mXQz8sXik =W/MF -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "reworked dts changes for ti81xx devices and minimal dra62x j5ec-evm support" from Tony Lindgren: Add minimal device tree support for dra62x also known j5eco. It is related to dm814x, just the clocks are a bit different and it has a different set of integrated devices. And let's get some basic dm814x and dra62x devices working as many of the devices are like on am33xx:: - pinctrl using the pinctrl defines as for am33xx - Updated EDMA bindings with support for using exma_xbar - MMC support for dm814x-evm, t410 and dra62x-j5eco-evm - USB support for dm814x-evm, t410 and dra62x-j5eco-evm This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed branch that has dm814x dts fixes interlaced with SoC related fixes to keep things booting. The interlaced SoC and dts fixes were needed because of issues with the device tree defined clocks that just happened to work on bootloader timings for t410 earlier. * tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: Add usb support for j5-eco evm ARM: dts: Add usb support for hp t410 ARM: dts: Add usb support for dm814x-evm ARM: dts: Add usb support for dm814x and dra62x ARM: dts: Enable emmc on hp t410 ARM: dts: Add mmc support for dra62x j5-eco evm ARM: dts: Add mmc support for dm8148-evm ARM: dts: Add mmc device entries for dm814x ARM: dts: Update edma bindings on dm814x to use edma_xbar ARM: dts: Add pinctrl macros for dm814x ARM: dts: Add minimal dra62x j5-eco evm support ARM: dts: Add basic support for dra62x j5-eco SoC ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: dts: Fix dm814x pinctrl address and mask ARM: dts: Fix dm8148 control modules ranges ARM: OMAP2+: Fix timer entries for dm814x ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: OMAP2+: Add DPPLS clock manager for dm814x clk: ti: Add few dm814x clock aliases ...
This commit is contained in:
Arnd Bergmann
commit
d4e68fa37f
@ -464,7 +464,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
|
||||
dtb-$(CONFIG_SOC_TI81XX) += \
|
||||
dm8148-evm.dtb \
|
||||
dm8148-t410.dtb \
|
||||
dm8168-evm.dtb
|
||||
dm8168-evm.dtb \
|
||||
dra62x-j5eco-evm.dtb
|
||||
dtb-$(CONFIG_SOC_AM33XX) += \
|
||||
am335x-baltos-ir5221.dtb \
|
||||
am335x-base0033.dtb \
|
||||
|
||||
@ -15,6 +15,14 @@
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
/* MIC94060YC6 controlled by SD1_POW pin */
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
@ -26,3 +34,50 @@
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd1_pins>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pincntl {
|
||||
sd1_pins: pinmux_sd1_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
|
||||
DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
|
||||
DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
|
||||
DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
|
||||
DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
|
||||
DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
|
||||
DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */
|
||||
DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */
|
||||
>;
|
||||
};
|
||||
|
||||
usb0_pins: pinmux_usb0_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
|
||||
usb1_pins: pinmux_usb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
@ -15,6 +15,24 @@
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
/* gpio9 seems to control USB VBUS regulator and/or hub power */
|
||||
usb_power: regulator@9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
@ -26,3 +44,55 @@
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd2_pins>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <8>;
|
||||
dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
|
||||
&edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
&pincntl {
|
||||
sd2_pins: pinmux_sd2_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */
|
||||
DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */
|
||||
DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[5] */
|
||||
DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[4] */
|
||||
DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[3] */
|
||||
DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[2] */
|
||||
DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[1] */
|
||||
DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */
|
||||
DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */
|
||||
DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */
|
||||
DM814X_IOPAD(0x0920, PIN_INPUT | 40) /* SD2_SDCD */
|
||||
>;
|
||||
};
|
||||
|
||||
usb0_pins: pinmux_usb0_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
|
||||
usb1_pins: pinmux_usb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
@ -4,18 +4,41 @@
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
&scm_clocks {
|
||||
|
||||
tclkin_ck: tclkin_ck {
|
||||
&pllss_clocks {
|
||||
timer1_fck: timer1_fck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
|
||||
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
|
||||
ti,bit-shift = <3>;
|
||||
reg = <0x2e0>;
|
||||
};
|
||||
|
||||
timer2_fck: timer2_fck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
|
||||
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
|
||||
ti,bit-shift = <6>;
|
||||
reg = <0x2e0>;
|
||||
};
|
||||
|
||||
sysclk18_ck: sysclk18_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
|
||||
ti,bit-shift = <0>;
|
||||
reg = <0x02f0>;
|
||||
};
|
||||
};
|
||||
|
||||
&scm_clocks {
|
||||
devosc_ck: devosc_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <20000000>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
|
||||
ti,bit-shift = <21>;
|
||||
reg = <0x0040>;
|
||||
};
|
||||
|
||||
/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
|
||||
@ -25,6 +48,32 @@
|
||||
clock-frequency = <27000000>;
|
||||
};
|
||||
|
||||
/* Optional 32768Hz crystal or clock on RTCOSC pins */
|
||||
rtcosc_ck: rtcosc_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
/* Optional external clock on TCLKIN pin, set rate in baord dts file */
|
||||
tclkin_ck: tclkin_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
virt_20000000_ck: virt_20000000_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
virt_19200000_ck: virt_19200000_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
mpu_ck: mpu_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
@ -49,12 +98,6 @@
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
sysclk18_ck: sysclk18_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
cpsw_125mhz_gclk: cpsw_125mhz_gclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
@ -69,7 +112,31 @@
|
||||
|
||||
};
|
||||
|
||||
&pllss_clocks {
|
||||
&prcm_clocks {
|
||||
osc_src_ck: osc_src_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&devosc_ck>;
|
||||
clock-mult = <1>;
|
||||
clock-div = <1>;
|
||||
};
|
||||
|
||||
mpu_clksrc_ck: mpu_clksrc_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&devosc_ck>, <&rtcdivider_ck>;
|
||||
ti,bit-shift = <0>;
|
||||
reg = <0x0040>;
|
||||
};
|
||||
|
||||
/* Fixed divider clock 0.0016384 * devosc */
|
||||
rtcdivider_ck: rtcdivider_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&devosc_ck>;
|
||||
clock-mult = <128>;
|
||||
clock-div = <78125>;
|
||||
};
|
||||
|
||||
aud_clkin0_ck: aud_clkin0_ck {
|
||||
#clock-cells = <0>;
|
||||
@ -88,22 +155,4 @@
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
timer1_mux_ck: timer1_mux_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
|
||||
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
|
||||
ti,bit-shift = <3>;
|
||||
reg = <0x2e0>;
|
||||
};
|
||||
|
||||
timer2_mux_ck: timer2_mux_ck {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
|
||||
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
|
||||
ti,bit-shift = <6>;
|
||||
reg = <0x2e0>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
#include <dt-bindings/pinctrl/dm814x.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
@ -21,6 +21,10 @@
|
||||
serial2 = &uart3;
|
||||
ethernet0 = &cpsw_emac0;
|
||||
ethernet1 = &cpsw_emac1;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
phy0 = &usb0_phy;
|
||||
phy1 = &usb1_phy;
|
||||
};
|
||||
|
||||
cpus {
|
||||
@ -57,9 +61,118 @@
|
||||
ranges;
|
||||
ti,hwmods = "l3_main";
|
||||
|
||||
usb: usb@47400000 {
|
||||
compatible = "ti,am33xx-usb";
|
||||
reg = <0x47400000 0x1000>;
|
||||
ranges;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ti,hwmods = "usb_otg_hs";
|
||||
|
||||
usb0_phy: usb-phy@47401300 {
|
||||
compatible = "ti,am335x-usb-phy";
|
||||
reg = <0x47401300 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&usb_ctrl_mod>;
|
||||
};
|
||||
|
||||
usb0: usb@47401000 {
|
||||
compatible = "ti,musb-am33xx";
|
||||
reg = <0x47401400 0x400
|
||||
0x47401000 0x200>;
|
||||
reg-names = "mc", "control";
|
||||
|
||||
interrupts = <18>;
|
||||
interrupt-names = "mc";
|
||||
dr_mode = "otg";
|
||||
mentor,multipoint = <1>;
|
||||
mentor,num-eps = <16>;
|
||||
mentor,ram-bits = <12>;
|
||||
mentor,power = <500>;
|
||||
phys = <&usb0_phy>;
|
||||
|
||||
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
|
||||
&cppi41dma 2 0 &cppi41dma 3 0
|
||||
&cppi41dma 4 0 &cppi41dma 5 0
|
||||
&cppi41dma 6 0 &cppi41dma 7 0
|
||||
&cppi41dma 8 0 &cppi41dma 9 0
|
||||
&cppi41dma 10 0 &cppi41dma 11 0
|
||||
&cppi41dma 12 0 &cppi41dma 13 0
|
||||
&cppi41dma 14 0 &cppi41dma 0 1
|
||||
&cppi41dma 1 1 &cppi41dma 2 1
|
||||
&cppi41dma 3 1 &cppi41dma 4 1
|
||||
&cppi41dma 5 1 &cppi41dma 6 1
|
||||
&cppi41dma 7 1 &cppi41dma 8 1
|
||||
&cppi41dma 9 1 &cppi41dma 10 1
|
||||
&cppi41dma 11 1 &cppi41dma 12 1
|
||||
&cppi41dma 13 1 &cppi41dma 14 1>;
|
||||
dma-names =
|
||||
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
|
||||
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
|
||||
"rx14", "rx15",
|
||||
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
|
||||
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
|
||||
"tx14", "tx15";
|
||||
};
|
||||
|
||||
usb1: usb@47401800 {
|
||||
compatible = "ti,musb-am33xx";
|
||||
reg = <0x47401c00 0x400
|
||||
0x47401800 0x200>;
|
||||
reg-names = "mc", "control";
|
||||
interrupts = <19>;
|
||||
interrupt-names = "mc";
|
||||
dr_mode = "otg";
|
||||
mentor,multipoint = <1>;
|
||||
mentor,num-eps = <16>;
|
||||
mentor,ram-bits = <12>;
|
||||
mentor,power = <500>;
|
||||
phys = <&usb1_phy>;
|
||||
|
||||
dmas = <&cppi41dma 15 0 &cppi41dma 16 0
|
||||
&cppi41dma 17 0 &cppi41dma 18 0
|
||||
&cppi41dma 19 0 &cppi41dma 20 0
|
||||
&cppi41dma 21 0 &cppi41dma 22 0
|
||||
&cppi41dma 23 0 &cppi41dma 24 0
|
||||
&cppi41dma 25 0 &cppi41dma 26 0
|
||||
&cppi41dma 27 0 &cppi41dma 28 0
|
||||
&cppi41dma 29 0 &cppi41dma 15 1
|
||||
&cppi41dma 16 1 &cppi41dma 17 1
|
||||
&cppi41dma 18 1 &cppi41dma 19 1
|
||||
&cppi41dma 20 1 &cppi41dma 21 1
|
||||
&cppi41dma 22 1 &cppi41dma 23 1
|
||||
&cppi41dma 24 1 &cppi41dma 25 1
|
||||
&cppi41dma 26 1 &cppi41dma 27 1
|
||||
&cppi41dma 28 1 &cppi41dma 29 1>;
|
||||
dma-names =
|
||||
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
|
||||
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
|
||||
"rx14", "rx15",
|
||||
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
|
||||
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
|
||||
"tx14", "tx15";
|
||||
};
|
||||
|
||||
cppi41dma: dma-controller@47402000 {
|
||||
compatible = "ti,am3359-cppi41";
|
||||
reg = <0x47400000 0x1000
|
||||
0x47402000 0x1000
|
||||
0x47403000 0x1000
|
||||
0x47404000 0x4000>;
|
||||
reg-names = "glue", "controller", "scheduler", "queuemgr";
|
||||
interrupts = <17>;
|
||||
interrupt-names = "glue";
|
||||
#dma-cells = <2>;
|
||||
#dma-channels = <30>;
|
||||
#dma-requests = <256>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* See TRM "Table 1-317. L4LS Instance Summary", just deduct
|
||||
* 0x1000 from the 1-317 addresses to get the device address
|
||||
* See TRM "Table 1-317. L4LS Instance Summary" for hints.
|
||||
* It shows the module target agent registers though, so the
|
||||
* actual device is typically 0x1000 before the target agent
|
||||
* except in cases where the module is larger than 0x1000.
|
||||
*/
|
||||
l4ls: l4ls@48000000 {
|
||||
compatible = "ti,dm814-l4ls", "simple-bus";
|
||||
@ -124,8 +237,8 @@
|
||||
interrupts = <65>;
|
||||
ti,spi-num-cs = <4>;
|
||||
ti,hwmods = "mcspi1";
|
||||
dmas = <&edma 16 &edma 17
|
||||
&edma 18 &edma 19>;
|
||||
dmas = <&edma 16 0 &edma 17 0
|
||||
&edma 18 0 &edma 19 0>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1";
|
||||
};
|
||||
|
||||
@ -143,7 +256,7 @@
|
||||
reg = <0x20000 0x2000>;
|
||||
clock-frequency = <48000000>;
|
||||
interrupts = <72>;
|
||||
dmas = <&edma 26 &edma 27>;
|
||||
dmas = <&edma 26 0 &edma 27 0>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
@ -153,7 +266,7 @@
|
||||
reg = <0x22000 0x2000>;
|
||||
clock-frequency = <48000000>;
|
||||
interrupts = <73>;
|
||||
dmas = <&edma 28 &edma 29>;
|
||||
dmas = <&edma 28 0 &edma 29 0>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
@ -163,7 +276,7 @@
|
||||
reg = <0x24000 0x2000>;
|
||||
clock-frequency = <48000000>;
|
||||
interrupts = <74>;
|
||||
dmas = <&edma 30 &edma 31>;
|
||||
dmas = <&edma 30 0 &edma 31 0>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
@ -181,12 +294,34 @@
|
||||
ti,hwmods = "timer3";
|
||||
};
|
||||
|
||||
mmc1: mmc@60000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
ti,hwmods = "mmc1";
|
||||
dmas = <&edma 24 0
|
||||
&edma 25 0>;
|
||||
dma-names = "tx", "rx";
|
||||
interrupts = <64>;
|
||||
interrupt-parent = <&intc>;
|
||||
reg = <0x60000 0x1000>;
|
||||
};
|
||||
|
||||
mmc2: mmc@1d8000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
ti,hwmods = "mmc2";
|
||||
dmas = <&edma 2 0
|
||||
&edma 3 0>;
|
||||
dma-names = "tx", "rx";
|
||||
interrupts = <28>;
|
||||
interrupt-parent = <&intc>;
|
||||
reg = <0x1d8000 0x1000>;
|
||||
};
|
||||
|
||||
control: control@140000 {
|
||||
compatible = "ti,dm814-scm", "simple-bus";
|
||||
reg = <0x140000 0x16d000>;
|
||||
reg = <0x140000 0x20000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x160000 0x16d000>;
|
||||
ranges = <0 0x140000 0x20000>;
|
||||
|
||||
scm_conf: scm_conf@0 {
|
||||
compatible = "syscon";
|
||||
@ -203,19 +338,52 @@
|
||||
};
|
||||
};
|
||||
|
||||
usb_ctrl_mod: control@620 {
|
||||
compatible = "ti,am335x-usb-ctrl-module";
|
||||
reg = <0x620 0x10
|
||||
0x648 0x4>;
|
||||
reg-names = "phy_ctrl", "wakeup";
|
||||
};
|
||||
|
||||
edma_xbar: dma-router@f90 {
|
||||
compatible = "ti,am335x-edma-crossbar";
|
||||
reg = <0xf90 0x40>;
|
||||
#dma-cells = <3>;
|
||||
dma-requests = <32>;
|
||||
dma-masters = <&edma>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Note that silicon revision 2.1 and older
|
||||
* require input enabled (bit 18 set) for all
|
||||
* 3.3V I/Os to avoid cumulative hardware damage.
|
||||
* For more info, see errata advisory 2.1.87.
|
||||
* We leave bit 18 out of function-mask and rely
|
||||
* on the bootloader for it.
|
||||
*/
|
||||
pincntl: pinmux@800 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x800 0xc38>;
|
||||
reg = <0x800 0x438>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0x300ff>;
|
||||
pinctrl-single,function-mask = <0x307ff>;
|
||||
};
|
||||
|
||||
usb1_phy: usb-phy@1b00 {
|
||||
compatible = "ti,am335x-usb-phy";
|
||||
reg = <0x1b00 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&usb_ctrl_mod>;
|
||||
};
|
||||
};
|
||||
|
||||
prcm: prcm@180000 {
|
||||
compatible = "ti,dm814-prcm", "simple-bus";
|
||||
reg = <0x180000 0x4000>;
|
||||
reg = <0x180000 0x2000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x180000 0x2000>;
|
||||
|
||||
prcm_clocks: clocks {
|
||||
#address-cells = <1>;
|
||||
@ -226,9 +394,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
|
||||
pllss: pllss@1c5000 {
|
||||
compatible = "ti,dm814-pllss", "simple-bus";
|
||||
reg = <0x1c5000 0x2000>;
|
||||
reg = <0x1c5000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x1c5000 0x1000>;
|
||||
|
||||
pllss_clocks: clocks {
|
||||
#address-cells = <1>;
|
||||
@ -254,13 +426,62 @@
|
||||
reg = <0x48200000 0x1000>;
|
||||
};
|
||||
|
||||
/* Board must configure evtmux with edma_xbar for EDMA */
|
||||
mmc3: mmc@47810000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
ti,hwmods = "mmc3";
|
||||
interrupts = <29>;
|
||||
interrupt-parent = <&intc>;
|
||||
reg = <0x47810000 0x1000>;
|
||||
};
|
||||
|
||||
edma: edma@49000000 {
|
||||
compatible = "ti,edma3";
|
||||
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
|
||||
reg = <0x49000000 0x10000>,
|
||||
<0x44e10f90 0x40>;
|
||||
compatible = "ti,edma3-tpcc";
|
||||
ti,hwmods = "tpcc";
|
||||
reg = <0x49000000 0x10000>;
|
||||
reg-names = "edma3_cc";
|
||||
interrupts = <12 13 14>;
|
||||
#dma-cells = <1>;
|
||||
interrupt-names = "edma3_ccint", "emda3_mperr",
|
||||
"edma3_ccerrint";
|
||||
dma-requests = <64>;
|
||||
#dma-cells = <2>;
|
||||
|
||||
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
|
||||
<&edma_tptc2 3>, <&edma_tptc3 0>;
|
||||
|
||||
ti,edma-memcpy-channels = <20 21>;
|
||||
};
|
||||
|
||||
edma_tptc0: tptc@49800000 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
ti,hwmods = "tptc0";
|
||||
reg = <0x49800000 0x100000>;
|
||||
interrupts = <112>;
|
||||
interrupt-names = "edma3_tcerrint";
|
||||
};
|
||||
|
||||
edma_tptc1: tptc@49900000 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
ti,hwmods = "tptc1";
|
||||
reg = <0x49900000 0x100000>;
|
||||
interrupts = <113>;
|
||||
interrupt-names = "edma3_tcerrint";
|
||||
};
|
||||
|
||||
edma_tptc2: tptc@49a00000 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
ti,hwmods = "tptc2";
|
||||
reg = <0x49a00000 0x100000>;
|
||||
interrupts = <114>;
|
||||
interrupt-names = "edma3_tcerrint";
|
||||
};
|
||||
|
||||
edma_tptc3: tptc@49b00000 {
|
||||
compatible = "ti,edma3-tptc";
|
||||
ti,hwmods = "tptc3";
|
||||
reg = <0x49b00000 0x100000>;
|
||||
interrupts = <115>;
|
||||
interrupt-names = "edma3_tcerrint";
|
||||
};
|
||||
|
||||
/* See TRM "Table 1-318. L4HS Instance Summary" */
|
||||
|
||||
23
arch/arm/boot/dts/dra62x-clocks.dtsi
Normal file
23
arch/arm/boot/dts/dra62x-clocks.dtsi
Normal file
@ -0,0 +1,23 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "dm814x-clocks.dtsi"
|
||||
|
||||
/*
|
||||
* Compared to dm814x, dra62x has different shifts and more mux options.
|
||||
* Please add the extra options for ysclk_14 and 16 if really needed.
|
||||
*/
|
||||
&timer1_fck {
|
||||
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
|
||||
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
|
||||
ti,bit-shift = <4>;
|
||||
};
|
||||
|
||||
&timer2_fck {
|
||||
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
|
||||
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
|
||||
ti,bit-shift = <8>;
|
||||
};
|
||||
80
arch/arm/boot/dts/dra62x-j5eco-evm.dts
Normal file
80
arch/arm/boot/dts/dra62x-j5eco-evm.dts
Normal file
@ -0,0 +1,80 @@
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra62x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DRA62x J5 Eco EVM";
|
||||
compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
/* MIC94060YC6 controlled by SD1_POW pin */
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd1_pins>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pincntl {
|
||||
sd1_pins: pinmux_sd1_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
|
||||
DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
|
||||
DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
|
||||
DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
|
||||
DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
|
||||
DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
|
||||
DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */
|
||||
DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */
|
||||
>;
|
||||
};
|
||||
|
||||
usb0_pins: pinmux_usb0_pins {
|
||||
pinctrl-single,pins = <
|
||||
DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
|
||||
&usb0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "disabled";
|
||||
};
|
||||
23
arch/arm/boot/dts/dra62x.dtsi
Normal file
23
arch/arm/boot/dts/dra62x.dtsi
Normal file
@ -0,0 +1,23 @@
|
||||
/*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include "dm814x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,dra62x";
|
||||
};
|
||||
|
||||
/* Compared to dm814x, dra62x has different offsets for Ethernet */
|
||||
&mac {
|
||||
reg = <0x4a100000 0x800
|
||||
0x4a101200 0x100>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
reg = <0x4a101000 0x100>;
|
||||
};
|
||||
|
||||
#include "dra62x-clocks.dtsi"
|
||||
@ -612,8 +612,7 @@ void __init ti814x_init_early(void)
|
||||
ti814x_clockdomains_init();
|
||||
dm814x_hwmod_init();
|
||||
omap_hwmod_init_postsetup();
|
||||
if (of_have_populated_dt())
|
||||
omap_clk_soc_init = dm814x_dt_clk_init;
|
||||
omap_clk_soc_init = dm814x_dt_clk_init;
|
||||
}
|
||||
|
||||
void __init ti816x_init_early(void)
|
||||
|
||||
@ -599,7 +599,7 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
|
||||
static struct omap_hwmod dm814x_timer1_hwmod = {
|
||||
.name = "timer1",
|
||||
.clkdm_name = "alwon_l3s_clkdm",
|
||||
.main_clk = "timer_sys_ck",
|
||||
.main_clk = "timer1_fck",
|
||||
.dev_attr = &capability_alwon_dev_attr,
|
||||
.class = &dm816x_timer_hwmod_class,
|
||||
.flags = HWMOD_NO_IDLEST,
|
||||
@ -608,7 +608,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = {
|
||||
static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
|
||||
.master = &dm81xx_l4_ls_hwmod,
|
||||
.slave = &dm814x_timer1_hwmod,
|
||||
.clk = "timer_sys_ck",
|
||||
.clk = "timer1_fck",
|
||||
.user = OCP_USER_MPU,
|
||||
};
|
||||
|
||||
@ -636,7 +636,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = {
|
||||
static struct omap_hwmod dm814x_timer2_hwmod = {
|
||||
.name = "timer2",
|
||||
.clkdm_name = "alwon_l3s_clkdm",
|
||||
.main_clk = "timer_sys_ck",
|
||||
.main_clk = "timer2_fck",
|
||||
.dev_attr = &capability_alwon_dev_attr,
|
||||
.class = &dm816x_timer_hwmod_class,
|
||||
.flags = HWMOD_NO_IDLEST,
|
||||
@ -645,7 +645,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
|
||||
static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
|
||||
.master = &dm81xx_l4_ls_hwmod,
|
||||
.slave = &dm814x_timer2_hwmod,
|
||||
.clk = "timer_sys_ck",
|
||||
.clk = "timer2_fck",
|
||||
.user = OCP_USER_MPU,
|
||||
};
|
||||
|
||||
@ -1230,8 +1230,6 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
|
||||
|
||||
/*
|
||||
* REVISIT: Test and enable the following once clocks work:
|
||||
* dm81xx_l4_ls__gpio1
|
||||
* dm81xx_l4_ls__gpio2
|
||||
* dm81xx_l4_ls__mailbox
|
||||
* dm81xx_alwon_l3_slow__gpmc
|
||||
* dm81xx_default_l3_slow__usbss
|
||||
@ -1250,6 +1248,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
|
||||
&dm81xx_l4_ls__wd_timer1,
|
||||
&dm81xx_l4_ls__i2c1,
|
||||
&dm81xx_l4_ls__i2c2,
|
||||
&dm81xx_l4_ls__gpio1,
|
||||
&dm81xx_l4_ls__gpio2,
|
||||
&dm81xx_l4_ls__elm,
|
||||
&dm81xx_l4_ls__mcspi1,
|
||||
&dm81xx_alwon_l3_fast__tpcc,
|
||||
|
||||
@ -662,6 +662,11 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
|
||||
.index = TI_CLKM_PRM,
|
||||
.init = am33xx_prm_init,
|
||||
};
|
||||
|
||||
static struct omap_prcm_init_data dm814_pllss_data __initdata = {
|
||||
.index = TI_CLKM_PLLSS,
|
||||
.init = am33xx_prm_init,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ARCH_OMAP4
|
||||
@ -715,6 +720,7 @@ static const struct of_device_id const omap_prcm_dt_match_table[] __initconst =
|
||||
#endif
|
||||
#ifdef CONFIG_SOC_TI81XX
|
||||
{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
|
||||
{ .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
|
||||
{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
|
||||
#endif
|
||||
#ifdef CONFIG_ARCH_OMAP2
|
||||
|
||||
@ -14,10 +14,14 @@ static struct ti_dt_clk dm814_clks[] = {
|
||||
DT_CLK(NULL, "devosc_ck", "devosc_ck"),
|
||||
DT_CLK(NULL, "mpu_ck", "mpu_ck"),
|
||||
DT_CLK(NULL, "sysclk4_ck", "sysclk4_ck"),
|
||||
DT_CLK(NULL, "sysclk5_ck", "sysclk5_ck"),
|
||||
DT_CLK(NULL, "sysclk6_ck", "sysclk6_ck"),
|
||||
DT_CLK(NULL, "sysclk8_ck", "sysclk8_ck"),
|
||||
DT_CLK(NULL, "sysclk10_ck", "sysclk10_ck"),
|
||||
DT_CLK(NULL, "sysclk18_ck", "sysclk18_ck"),
|
||||
DT_CLK(NULL, "timer_sys_ck", "devosc_ck"),
|
||||
DT_CLK(NULL, "timer1_fck", "timer1_fck"),
|
||||
DT_CLK(NULL, "timer2_fck", "timer2_fck"),
|
||||
DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
|
||||
DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
|
||||
{ .node_name = NULL },
|
||||
|
||||
48
include/dt-bindings/pinctrl/dm814x.h
Normal file
48
include/dt-bindings/pinctrl/dm814x.h
Normal file
@ -0,0 +1,48 @@
|
||||
/*
|
||||
* This header provides constants specific to DM814X pinctrl bindings.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_PINCTRL_DM814X_H
|
||||
#define _DT_BINDINGS_PINCTRL_DM814X_H
|
||||
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#undef INPUT_EN
|
||||
#undef PULL_UP
|
||||
#undef PULL_ENA
|
||||
|
||||
/*
|
||||
* Note that dm814x silicon revision 2.1 and older require input enabled
|
||||
* (bit 18 set) for all 3.3V I/Os to avoid cumulative hardware damage. For
|
||||
* more info, see errata advisory 2.1.87. We leave bit 18 out of
|
||||
* function-mask in dm814x.h and rely on the bootloader for it.
|
||||
*/
|
||||
#define INPUT_EN (1 << 18)
|
||||
#define PULL_UP (1 << 17)
|
||||
#define PULL_DISABLE (1 << 16)
|
||||
|
||||
/* update macro depending on INPUT_EN and PULL_ENA */
|
||||
#undef PIN_OUTPUT
|
||||
#undef PIN_OUTPUT_PULLUP
|
||||
#undef PIN_OUTPUT_PULLDOWN
|
||||
#undef PIN_INPUT
|
||||
#undef PIN_INPUT_PULLUP
|
||||
#undef PIN_INPUT_PULLDOWN
|
||||
|
||||
#define PIN_OUTPUT (PULL_DISABLE)
|
||||
#define PIN_OUTPUT_PULLUP (PULL_UP)
|
||||
#define PIN_OUTPUT_PULLDOWN 0
|
||||
#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
|
||||
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
|
||||
#define PIN_INPUT_PULLDOWN (INPUT_EN)
|
||||
|
||||
/* undef non-existing modes */
|
||||
#undef PIN_OFF_NONE
|
||||
#undef PIN_OFF_OUTPUT_HIGH
|
||||
#undef PIN_OFF_OUTPUT_LOW
|
||||
#undef PIN_OFF_INPUT_PULLUP
|
||||
#undef PIN_OFF_INPUT_PULLDOWN
|
||||
#undef PIN_OFF_WAKEUPENABLE
|
||||
|
||||
#endif
|
||||
|
||||
@ -61,6 +61,7 @@
|
||||
#define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val)
|
||||
#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
|
||||
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
|
||||
#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
|
||||
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
|
||||
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
|
||||
|
||||
|
||||
@ -195,6 +195,7 @@ enum {
|
||||
TI_CLKM_PRM,
|
||||
TI_CLKM_SCRM,
|
||||
TI_CLKM_CTRL,
|
||||
TI_CLKM_PLLSS,
|
||||
CLK_MAX_MEMMAPS
|
||||
};
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user