From 7352e72a513fd2757b2fda695a349d86faa4c94e Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Thu, 8 Aug 2019 13:33:35 +0300
Subject: [PATCH 1/3] regulator: slg51000: Fix a couple NULL vs IS_ERR() checks
The devm_gpiod_get_from_of_node() function never returns NULL, it
returns error pointers on error.
Fixes: a867bde3dd03 ("regulator: slg51000: add slg51000 regulator driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190808103335.GD30506@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/slg51000-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c
index 04b732991d69..4d859fef55e6 100644
--- a/drivers/regulator/slg51000-regulator.c
+++ b/drivers/regulator/slg51000-regulator.c
@@ -205,7 +205,7 @@ static int slg51000_of_parse_cb(struct device_node *np,
ena_gpiod = devm_gpiod_get_from_of_node(chip->dev, np,
"enable-gpios", 0,
gflags, "gpio-en-ldo");
- if (ena_gpiod) {
+ if (!IS_ERR(ena_gpiod)) {
config->ena_gpiod = ena_gpiod;
devm_gpiod_unhinge(chip->dev, config->ena_gpiod);
}
@@ -459,7 +459,7 @@ static int slg51000_i2c_probe(struct i2c_client *client,
GPIOD_OUT_HIGH
| GPIOD_FLAGS_BIT_NONEXCLUSIVE,
"slg51000-cs");
- if (cs_gpiod) {
+ if (!IS_ERR(cs_gpiod)) {
dev_info(dev, "Found chip selector property\n");
chip->cs_gpiod = cs_gpiod;
}
From 5d2fc542e8c92130b55ddeb81876ec398adf4d13 Mon Sep 17 00:00:00 2001
From: Raag Jadav <raagjadav@gmail.com>
Date: Tue, 13 Aug 2019 00:09:54 +0530
Subject: [PATCH 2/3] regulator: act8945a-regulator: fix ldo register addresses
in set_mode hook
According to ACT8945A datasheet[1], operating modes for ldos are
controlled by BIT(5) of their respective _CTRL registers.
[1] https://active-semi.com/wp-content/uploads/ACT8945A_Datasheet.pdf
Fixes: 7482d6ecc68e ("regulator: act8945a-regulator: Implement PM functionalities")
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Link: https://lore.kernel.org/r/1565635194-5816-1-git-send-email-raagjadav@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/act8945a-regulator.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 584284938ac9..d2f804dbc785 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
reg = ACT8945A_DCDC3_CTRL;
break;
case ACT8945A_ID_LDO1:
- reg = ACT8945A_LDO1_SUS;
+ reg = ACT8945A_LDO1_CTRL;
break;
case ACT8945A_ID_LDO2:
- reg = ACT8945A_LDO2_SUS;
+ reg = ACT8945A_LDO2_CTRL;
break;
case ACT8945A_ID_LDO3:
- reg = ACT8945A_LDO3_SUS;
+ reg = ACT8945A_LDO3_CTRL;
break;
case ACT8945A_ID_LDO4:
- reg = ACT8945A_LDO4_SUS;
+ reg = ACT8945A_LDO4_CTRL;
break;
default:
return -EINVAL;
From 3829100a63724f6dbf264b2a7f06e7f638ed952d Mon Sep 17 00:00:00 2001
From: Andreas Kemnade <andreas@kemnade.info>
Date: Wed, 14 Aug 2019 23:43:19 +0200
Subject: [PATCH 3/3] regulator: twl: voltage lists for vdd1/2 on twl4030
_opp_supported_by_regulators() wrongly ignored errors from
regulator_is_supported_voltage(), so it considered errors as
success. Since
commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
regulator_is_supported_voltage() returns a real boolean, so
errors make _opp_supported_by_regulators() return false.
That reveals a problem with the declaration of the VDD1/2
regulators on twl4030.
The VDD1/VDD2 regulators on twl4030 are neither defined with
voltage lists nor with the continuous flag set, so
regulator_is_supported_voltage() returns false and an error
before above mentioned commit (which was considered success)
The result is that after the above mentioned commit cpufreq
does not work properly e.g. dm3730.
[ 2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
[ 2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
[ 2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
[ 2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
[ 2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
[ 2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)
The patch fixes declaration of VDD1/2 regulators by
adding proper voltage lists.
Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Link: https://lore.kernel.org/r/20190814214319.24087-1-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 6fa15b2d6fb3..866b4dd01da9 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
2500, 2750,
};
+/* 600mV to 1450mV in 12.5 mV steps */
+static const struct regulator_linear_range VDD1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
+};
+
+/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
+static const struct regulator_linear_range VDD2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
+};
+
static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
@@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
}
static const struct regulator_ops twl4030smps_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
.set_voltage = twl4030smps_set_voltage,
.get_voltage = twl4030smps_get_voltage,
};
@@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
}, \
}
-#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
+ n_volt) \
static const struct twlreg_info TWL4030_INFO_##label = { \
.base = offset, \
.id = num, \
@@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
.of_map_mode = twl4030reg_map_mode, \
+ .n_voltages = n_volt, \
+ .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
+ .linear_ranges = label ## _ranges, \
}, \
}
@@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
+TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
+TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
/* VUSBCP is managed *only* by the USB subchip */
TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);