x86, bios: By default, reserve the low 64K for all BIOSes

The laundry list of BIOSes that need the low 64K reserved is getting
very long, so make it the default across all BIOSes.  This also allows
the code to be simplified and unified with the reservation code for
the first 4K.

This resolves kernel bugzilla 16661 and who knows what else...

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-*@git.kernel.org>

arch/x86/Kconfig

@@ -1326,25 +1326,34 @@ config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
 	  Set whether the default state of memory_corruption_check is
 	  on or off.
 
-config X86_RESERVE_LOW_64K
+config X86_LOW_RESERVE
-	bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+	int "Amount of low memory, in kilobytes, to reserve for the BIOS"
-	default y
+	default 64
+	range 4 640
 	---help---
-	  Reserve the first 64K of physical RAM on BIOSes that are known
+	  Specify the amount of low memory to reserve for the BIOS.
-	  to potentially corrupt that memory range. A numbers of BIOSes are
-	  known to utilize this area during suspend/resume, so it must not
-	  be used by the kernel.
 
-	  Set this to N if you are absolutely sure that you trust the BIOS
+	  The first page contains BIOS data structures that the kernel
-	  to get all its memory reservations and usages right.
+	  must not use, so that page must always be reserved.
 
-	  If you have doubts about the BIOS (e.g. suspend/resume does not
+	  By default we reserve the first 64K of physical RAM, as a
-	  work or there's kernel crashes after certain hardware hotplug
+	  number of BIOSes are known to corrupt that memory range
-	  events) and it's not AMI or Phoenix, then you might want to enable
+	  during events such as suspend/resume or monitor cable
-	  X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+	  insertion, so it must not be used by the kernel.
-	  corruption patterns.
 
-	  Say Y if unsure.
+	  You can set this to 4 if you are absolutely sure that you
+	  trust the BIOS to get all its memory reservations and usages
+	  right.  If you know your BIOS have problems beyond the
+	  default 64K area, you can set this to 640 to avoid using the
+	  entire low memory range.
+
+	  If you have doubts about the BIOS (e.g. suspend/resume does
+	  not work or there's kernel crashes after certain hardware
+	  hotplug events) then you might want to enable
+	  X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check
+	  typical corruption patterns.
+
+	  Leave this to the default value of 64 if you are unsure.
 
 config MATH_EMULATION
 	bool

arch/x86/kernel/setup.c

@@ -618,88 +618,20 @@ static __init void reserve_ibft_region(void)
 		reserve_early_overlap_ok(addr, addr + size, "ibft");
 }
 
-#ifdef CONFIG_X86_RESERVE_LOW_64K
-static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE
-		"%s detected: BIOS may corrupt low RAM, working around it.\n",
-		d->ident);
-
-	e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
-
-	return 0;
-}
-#endif
-
-/* List of systems that have known low memory corruption BIOS problems */
-static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
-#ifdef CONFIG_X86_RESERVE_LOW_64K
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "AMI BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
-		},
-	},
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "Phoenix BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
-		},
-	},
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "Phoenix/MSC BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
-		},
-	},
-	/*
-	 * AMI BIOS with low memory corruption was found on Intel DG45ID and
-	 * DG45FC boards.
-	 * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
-	 * match only DMI_BOARD_NAME and see if there is more bad products
-	 * with this vendor.
-	 */
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "AMI BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
-		},
-	},
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "AMI BIOS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
-		},
-	},
-	/*
-	 * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so
-	 * match on the product name.
-	 */
-	{
-		.callback = dmi_low_memory_corruption,
-		.ident = "Phoenix BIOS",
-		.matches = {
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
-		},
-	},
-#endif
-	{}
-};
-
 static void __init trim_bios_range(void)
 {
 	/*
 	 * A special case is the first 4Kb of memory;
 	 * This is a BIOS owned area, not kernel ram, but generally
 	 * not listed as such in the E820 table.
+	 *
+	 * This typically reserves additional memory (64KiB by default)
+	 * since some BIOSes are known to corrupt low memory.  See the
+	 * Kconfig help text for X86_LOW_RESERVE.
 	 */
-	e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED);
+	e820_update_range(0, ALIGN(CONFIG_X86_LOW_RESERVE << 10, PAGE_SIZE),
+			  E820_RAM, E820_RESERVED);
+
 	/*
 	 * special case: Some BIOSen report the PC BIOS
 	 * area (640->1Mb) as ram even though it is not.
@@ -863,8 +795,6 @@ void __init setup_arch(char **cmdline_p)
 
 	dmi_scan_machine();
 
-	dmi_check_system(bad_bios_dmi_table);
-
 	/*
 	 * VMware detection requires dmi to be available, so this
 	 * needs to be done after dmi_scan_machine, for the BP.