From 0f1b2a4912b270395d4f61bfcc1ff8d4903dde4a Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 30 Mar 2021 15:02:44 +0800 Subject: [PATCH 1/6] mips/sgi-ip27: Delete obsolete TODO file The TODO file here has not been updated for 15 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing Signed-off-by: David S. Miller --- arch/mips/sgi-ip27/TODO | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 arch/mips/sgi-ip27/TODO diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO deleted file mode 100644 index 160857ff1483..000000000000 --- a/arch/mips/sgi-ip27/TODO +++ /dev/null @@ -1,19 +0,0 @@ -1. Need to figure out why PCI writes to the IOC3 hang, and if it is okay -not to write to the IOC3 ever. -2. Need to figure out RRB allocation in bridge_startup(). -3. Need to figure out why address swaizzling is needed in inw/outw for -Qlogic scsi controllers. -4. Need to integrate ip27-klconfig.c:find_lboard and -ip27-init.c:find_lbaord_real. DONE -5. Is it okay to set calias space on all nodes as 0, instead of 8k as -in irix? -6. Investigate why things do not work without the setup_test() call -being invoked on all nodes in ip27-memory.c. -8. Too many do_page_faults invoked - investigate. -9. start_thread must turn off UX64 ... and define tlb_refill_debug. -10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable -does not agree with pgd_bad/pmd_bad. -11. All intrs (ip27_do_irq handlers) are targeted at cpu A on the node. -This might need to change later. Only the timer intr is set up to be -received on both Cpu A and B. (ip27_do_irq()/bridge_startup()) -13. Cache flushing (specially the SMP version) has to be investigated. From ef843f261b881aaf5a8e4fa90815a97b37dab1f2 Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 30 Mar 2021 15:02:45 +0800 Subject: [PATCH 2/6] scsi/aacraid: Delete obsolete TODO file The TODO file here has not been updated from 2.6.12 for more than 15 years. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing Signed-off-by: David S. Miller --- drivers/scsi/aacraid/TODO | 3 --- 1 file changed, 3 deletions(-) delete mode 100644 drivers/scsi/aacraid/TODO diff --git a/drivers/scsi/aacraid/TODO b/drivers/scsi/aacraid/TODO deleted file mode 100644 index 78dc863eff4f..000000000000 --- a/drivers/scsi/aacraid/TODO +++ /dev/null @@ -1,3 +0,0 @@ -o Testing -o More testing -o I/O size increase From 22612b4e60397c038ef91ed06e741f1063d6a56a Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 30 Mar 2021 15:02:46 +0800 Subject: [PATCH 3/6] fs/befs: Delete obsolete TODO file The TODO file here has not been updated from 2005, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing Signed-off-by: David S. Miller --- fs/befs/TODO | 14 -------------- 1 file changed, 14 deletions(-) delete mode 100644 fs/befs/TODO diff --git a/fs/befs/TODO b/fs/befs/TODO deleted file mode 100644 index 3250921aa2e6..000000000000 --- a/fs/befs/TODO +++ /dev/null @@ -1,14 +0,0 @@ -TODO -========== - -* Convert comments to the Kernel-Doc format. - -* Befs_fs.h has gotten big and messy. No reason not to break it up into - smaller peices. - -* See if Alexander Viro's option parser made it into the kernel tree. - Use that if we can. (include/linux/parser.h) - -* See if we really need separate types for on-disk and in-memory - representations of the superblock and inode. - From ab36ba4f3a81c5562cabab9988c6aa8ef65a5543 Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 30 Mar 2021 15:02:47 +0800 Subject: [PATCH 4/6] fs/jffs2: Delete obsolete TODO file The TODO file here has not been updated for 14 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing Signed-off-by: David S. Miller --- fs/jffs2/TODO | 37 ------------------------------------- 1 file changed, 37 deletions(-) delete mode 100644 fs/jffs2/TODO diff --git a/fs/jffs2/TODO b/fs/jffs2/TODO deleted file mode 100644 index ca28964abd4b..000000000000 --- a/fs/jffs2/TODO +++ /dev/null @@ -1,37 +0,0 @@ - - - support asynchronous operation -- add a per-fs 'reserved_space' count, - let each outstanding write reserve the _maximum_ amount of physical - space it could take. Let GC flush the outstanding writes because the - reservations will necessarily be pessimistic. With this we could even - do shared writable mmap, if we can have a fs hook for do_wp_page() to - make the reservation. - - disable compression in commit_write()? - - fine-tune the allocation / GC thresholds - - chattr support - turning on/off and tuning compression per-inode - - checkpointing (do we need this? scan is quite fast) - - make the scan code populate real inodes so read_inode just after - mount doesn't have to read the flash twice for large files. - Make this a per-inode option, changeable with chattr, so you can - decide which inodes should be in-core immediately after mount. - - test, test, test - - - NAND flash support: - - almost done :) - - use bad block check instead of the hardwired byte check - - - Optimisations: - - Split writes so they go to two separate blocks rather than just c->nextblock. - By writing _new_ nodes to one block, and garbage-collected REF_PRISTINE - nodes to a different one, we can separate clean nodes from those which - are likely to become dirty, and end up with blocks which are each far - closer to 100% or 0% clean, hence speeding up later GC progress dramatically. - - Stop keeping name in-core with struct jffs2_full_dirent. If we keep the hash in - the full dirent, we only need to go to the flash in lookup() when we think we've - got a match, and in readdir(). - - Doubly-linked next_in_ino list to allow us to free obsoleted raw_node_refs immediately? - - Remove size from jffs2_raw_node_frag. - -dedekind: -1. __jffs2_flush_wbuf() has a strange 'pad' parameter. Eliminate. -2. get_sb()->build_fs()->scan() path... Why get_sb() removes scan()'s crap in - case of failure? scan() does not clean everything. Fix. From 8d9e5bbf5c68c25ab2d93e910a258ec7193df1e2 Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 30 Mar 2021 15:02:48 +0800 Subject: [PATCH 5/6] net/ax25: Delete obsolete TODO file The TODO file here has not been updated for 13 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing Signed-off-by: David S. Miller --- net/ax25/TODO | 20 -------------------- 1 file changed, 20 deletions(-) delete mode 100644 net/ax25/TODO diff --git a/net/ax25/TODO b/net/ax25/TODO deleted file mode 100644 index 69fb4e368d92..000000000000 --- a/net/ax25/TODO +++ /dev/null @@ -1,20 +0,0 @@ -Do the ax25_list_lock, ax25_dev_lock, linkfail_lockreally, ax25_frag_lock and -listen_lock have to be bh-safe? - -Do the netrom and rose locks have to be bh-safe? - -A device might be deleted after lookup in the SIOCADDRT ioctl but before it's -being used. - -Routes to a device being taken down might be deleted by ax25_rt_device_down -but added by somebody else before the device has been deleted fully. - -The ax25_rt_find_route synopsys is pervert but I somehow had to deal with -the race caused by the static variable in it's previous implementation. - -Implement proper socket locking in netrom and rose. - -Check socket locking when ax25_rcv is sending to raw sockets. In particular -ax25_send_to_raw() seems fishy. Heck - ax25_rcv is fishy. - -Handle XID and TEST frames properly. From b9aa074b896b8d33269d085f360cd614c36e52d2 Mon Sep 17 00:00:00 2001 From: Wang Qing Date: Tue, 30 Mar 2021 15:02:49 +0800 Subject: [PATCH 6/6] net/decnet: Delete obsolete TODO file The TODO file here has not been updated from 2005, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing Signed-off-by: David S. Miller --- net/decnet/TODO | 40 ---------------------------------------- 1 file changed, 40 deletions(-) delete mode 100644 net/decnet/TODO diff --git a/net/decnet/TODO b/net/decnet/TODO deleted file mode 100644 index 358e9eb49016..000000000000 --- a/net/decnet/TODO +++ /dev/null @@ -1,40 +0,0 @@ -Steve's quick list of things that need finishing off: -[they are in no particular order and range from the trivial to the long winded] - - o Proper timeouts on each neighbour (in routing mode) rather than - just the 60 second On-Ethernet cache value. - - o Support for X.25 linklayer - - o Support for DDCMP link layer - - o The DDCMP device itself - - o PPP support (rfc1762) - - o Lots of testing with real applications - - o Verify errors etc. against POSIX 1003.1g (draft) - - o Using send/recvmsg() to get at connect/disconnect data (POSIX 1003.1g) - [maybe this should be done at socket level... the control data in the - send/recvmsg() calls should simply be a vector of set/getsockopt() - calls] - - o check MSG_CTRUNC is set where it should be. - - o Find all the commonality between DECnet and IPv4 routing code and extract - it into a small library of routines. [probably a project for 2.7.xx] - - o Add perfect socket hashing - an idea suggested by Paul Koning. Currently - we have a half-way house scheme which seems to work reasonably well, but - the full scheme is still worth implementing, its not not top of my list - right now. - - o Add session control message flow control - - o Add NSP message flow control - - o DECnet sendpages() function - - o AIO for DECnet